Latest iv stand Tenders | Government iv stand Tenders

corporations/Associations/Others

CTN :41508588

14 Oct, 2025 9.77 Crore

Pune - Maharashtra

Tender For corrigendum : request for bids for supply, installation and commissioning of slaughter house plant as per apeda standard - a: civil work items, dismantling the reinforcement cement concrete (r.c.c.) work 1:2:4 and sorting out the materials such as steel etc. as directed and stacking them within the specified lead as directed etc. complete., dismantling brick masonry in lime or cement mortar and stacking the material as directed with all leads, lifts etc., removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete., removing ventilators and small windows with frame and stacking the materials with all leads, lifts etc. complete., removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete, removing purlins from roof including stacking as directed with all leads , lifts etc. complete., removing rafters from roof including the materials as directed with all leads , lifts etc. complete., removing queen post truss from roof and stacking the materials as directed with allleads and lifts etc. complete, removing galvanized iron (g.i.) or asbestos cement (a.c.) sheet roofing including purlins, principal rafters etc. including sorting serviceable and unserviceable materials, stacking the same as and where directed in the compound including scaffolding etc. complete., excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (lift upto 1.5 m.) by mechanical means, lift upto 1.50 m, excavation for foundation in hard murum including removing the excavated material upto distance of 50 meters beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (lift upto 1.50 m) by mechanical means, lift upto 1.50 m, excavation for foundation in hard murum including removing the cubic meter (cu.m) excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (lift from 1.5 to 3.0m.) by mechanical means, excavation for foundation in soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth/murum, ramming ,watering including shoring and strutting etc. complete. (lift from 1.5m to 3.0 m.) by mechanical means, lift upto 3.0 m, excavation for foundation in hard-rock by blasting including cubic meter (cu.m) trimming and levelling the bed by chiselling where necessary and removing the excavated material and stacking it in measurable heaps within a distance of 50 metres from the building area including dewatering and back filling with available earth/murum watering, ramming etc. complete. (lift from 1.5m to 3.0 m) by mechanical means, filling in plinth and floors with approved excavated materials available at site in 30 cm layers include- ing watering and compaction with plate compactor to required proctor density etc complete., filling in plinth and floors with contractors material/brought from outside and approved by engineer in charge in layers of 15 cm to 20 cm including watering and compaction etc. complete., providing dry trap / granite / quartzite gneiss 200 mm thick hard core metal spread in two layers each of 125mm thick crushed to 100 mm c

Central Government/Public Sector

CTN :42119682

16 Oct, 2025 NA

Bhilai - Chhattisgarh

Tender For tender for supply of set screw sr3 sr7 dmh449868 1 daniel , upright 4 407727 t danieli , upright 4 407728 b danieli , clamp 5 179680 k danieli , nut 5 179084 v 001 danieli , schnorr miller safety 0 001316 a daniel , tension rod 4 407717 z danieli , flange 5 179086 x danieli , rest bar 5 009557 d danieli , rest bar 5 179246 k 006 danieli , crosshead 5 179681 f 002 danieli , sliding shoe 5 179678 r 003 danieli , fastening screw 4 861468 c 018 danieli , fastening screw 4 861468 c 001 danieli , clamp 5 179244 q danieli , tension rod part no 4 407657 c danieli , screw 0 000473 k danieli , parallel pin 0 339415 c danieli , washer 0 001314 f danieli , washer 0 001301 k danieli , fastening screw 5 372681 g 005 danieli , round d 60 din 1013 0 310181 g danieli , flange 5 179085 w danieli , slide 5 179709 r danieli , crosshead 5 179708 t danieli , sliding shoe 5 179679 v 004 danieli , sliding shoe 5 179678 r 004 danieli , shim 5 107628 b 027 danieli , screw nut 5 179673 p 002 danieli , feather key 4 407705 d 001 danieli , washer 4 017239 r 001 danieli , shim 5 107628 b 028 danieli , fork 5 179717 c danieli , screw 0 063180 c danieli , parallel pin 0 002543 e danieli , parallel pin 0 002541 c danieli , screw 0 058940 x danieli , lead screw 5 164449 f 010 danieli , flange 5 179062 e danieli , flange 5 179063 f danieli , slide 5 179732 b danieli , crosshead 5 179730 m danieli , sliding shoe 5 179679 v 005 danieli , sliding shoe 5 179678 r 005 danieli , shim 5 107628 b 005 danieli , clamp 5 179248 r danieli , female screw 5 179747 h danieli , locking wedge 5 179238 k danieli , shim 4 424999 l danieli , rest bar 5 009549 l p08 danieli , flange 5 009558 m danieli , sliding shoe 5 179679 v 002 danieli , shim 5 107628 b 025 danieli , feather key 4 407736 r 004 danieli , shim 5 107628 b 026 danieli , fork 5 179677 l danieli , shim 5 107628 b 030 danieli , washer 4 017239 r 005 danieli , fork 5 179731 a danieli , shim 4 400129 f 002 danieli , feather key 4 407705 d 003 danieli , tension rod 4 400114 z danieli , screw 0 000436 e danieli , tube for mechanical ap 0 006896 w daniel , entry guide 4 707335 e danieli , entry guide 4 707336 f danieli , spacer 4 707337 g 007 danieli , screw 4 093437 g danieli , cover 4 890697 v 068 danieli , body 4 707338 q 008 danieli , bed plate 4 517743 x danieli , bed plate 4 541394 s danieli , bearing cap dmh363443 1 danieli , shim dmh451711 a danieli , shim dmh451711 1 danieli , shim dmh451711 2 danieli , shim dmh451711 3 danieli , roller guide plate dmh367767 1 danieli , body 4 707339 h 004 danieli , cover 4 707340 w 004 danieli , spacer for 4 707337 g 006 danieli , cover 4 890697 v 100 danieli , body 4 707338 q 014 danieli , bed plate 4 707016 s danieli , bearing cap dmh361204 1 danieli , plate dmh360972 a danieli , spacer danieli , box machining sr7 dmh150633 1 danieli , plastic string 0 251155 n 010 danieli , roller holder dmh150635 1 danieli , roller holder dmh150636 1 danieli , pin assembly dmh361193 a danieli , cover assembly dmh361191 a danieli , setting wheel left dmh361195 a danieli , setting wheel right dmh361192 a danieli , gear wheel assembly dmh361190 a danieli , worm screw assembly dmh361189 a danieli , positioner 0 513102 s danieli , parallel pin 0 002471 e danieli , rubber hose 0 007792 e danieli , plate 5 093411 e danieli , upper plate 4 534183 g danieli , lower plate 4 534184 a danieli , bed plate 4 534179 r danieli , thrust plate 4 777800 k danieli , box machining dmh158456 1 danieli , roller holder dmh150419 1 danieli , roller holder dmh150418 1 danieli , pin assembly dmh361134 a danieli , cover assembly dmh251985 a danieli , setting wheel left dmh360838 a danieli , setting wheel right dmh360837 a danieli , worm wheel assembly dmh251984 a danieli , plate 5 093410 h 001 danieli , machined pin 5 093423 b danieli , plate dmh455842 1 danieli , washer 4 005013 h danieli , machining sr2 dmh148876 1 danieli , roller holder dmh149732 1 danieli , roller holder dmh149730 1 danieli , pivot shaft dmh360925 a

State Government

CTN :41810989

06 Oct, 2025 NA

Karur - Tamil Nadu

Tender For corrigendum : fabrication and erection of ss protection shield for bed ash cooler use in boiler # 7 at energy mechanical at tnpl unit 1.

Central Government/Public Sector

CTN :42122189

22 Oct, 2025 NA

Ganjam - Odisha

Tender For supply of supply of spares for caustic lye pump under pac : - bearing adopter, mtl. - is 210 fg 260 , bearing cap outer, mtl. - is 210 fg 260 , bearing cap inner, mtl. - is 210 fg 260 , bearing housing lantern, mtl. - is 210 fg 260 , casing cover, mtl. - astm a 743 cf8 , gland housing, mtl. - astm a 743 cf8 , laybrinth, mtl. - astm a 743 cf8 , stuffing box cover plate, mtl. - astm a 743 cf8 , support foot, mtl. - astm a 216 gr. wcb , deflector, mtl. - aisi 304 , impeller nut, mtl. - aisi 316 , shaft sleeve m. seal, mtl. - aisi 316 , pump shaft with keys, mtl. - aisi 316 , impeller, mtl. - astm a 743 cf8 , gasket set, mtl. - teflon , o ring set, mtl. - neoprene rubber , oil seal set, mtl. - synthetic rubber , bearing set, mtl. - bearing steel , volute casing, mtl. - astm a 743 cf8 , bearing bed, mtl. - is 210 fg 260 , complete fasteners except bearing, mtl. - is 1363 ms , mechanical seal plus gland plate, mtl. - std , auxillary pipe, mtl. - std

State Government

CTN :42134701

25 Oct, 2025 NA

Wardha - Maharashtra

Tender For supply of syringe pump with iv stand

CTN :41617715

07 Oct, 2025 NA

Nandurbar - Maharashtra

Tender For corrigendum : supply of electric suction , ottable hydraulic , gynac cautery , no cylinder , horizontal 2 drum autoclave , ot light shadowless , dressing drum ss 11 9 , dressing drum ss 10 14 , dressing drum ss 12 15 , dressing trolley , stretcher on trolley , wheel chair , examination table footsteps , instruments trolley , crash cart , labor table , gynac examination table , foetal monitor , bedside locker , attendant stool , semi fowler with mattress , ecg computerised , bp aparatus , ss tray 18 13 , lscs set , tubectomy set , fogger machine , baby weight machine , foetal doppler , iv stand , haemocue hb meter with strip

State Government

CTN :42095240

13 Oct, 2025 9.50 Lacs

Multi City - Karnataka

Tender For the brief scope of works involves supply, installation, testing and commissioning of mechanical over speed device for river bed unit 1 at bhadra generating station.dismantling of existing over speed device (osd, supply of new over speed device,modification of existing mechanical osd as per site requirement,replacing of any damaged fasteners, gaskets, and o-ring & oil seals if needed, replacing and modification of oil pipe lines as per site requirement, assembling of new osd and testing and commissioning for designed speed.

Central Government/Public Sector

CTN :42107579

20 Oct, 2025 57.54 Lacs

East Singhbhum - Jharkhand

Tender For supply of annual civil maintenance works at ucil narwapahar township for one year - earth work in excavation by mechanical means hydraulic excavator manual means over areas exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth lead up to 50 m and lift up to 1.5 m, as directed by engineer-in-charge. all kind of soil , filling available excavated earth excluding rock in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. , providing and laying cement concrete in retaining walls, return walls, walls any thickness including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing a 1 ratio 3 ration 6 1 cement 3 coarse sand 6 20 mm stone aggregate nominal size , reinforced cement concrete work in beam,suspended floors,roofs, having slope up to 15 landings balconies, shelves,chajja,lintel,band,plain window sills,stsiarcase and spiral stair case above plinth level upto floor five level execluding the cost of centering,shuttering,finishing and reinforced with 1 ratio 1.5 ratio 3 1 cement 1.5 coarse sand 3 graded stone aggregate., centering and shuttering including strutting, propping etc. and removal of form for a) suspended floors, roofs, landing, balconies and access platform , steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level. a) thermo-mechanically treated bars of grade fe-500d or more. , brick work with common burnt clay f.p.s. non modular bricks of class designation 7.5 in superstructure above plinth level up to floor v level in all shapes and sizes in a cement mortar 1 ratio 6 1 cement 6 coarse sand , brick work with common burnt clay f.p.s non modular brick of class designation 7.5 m superstures above plinth level up to floor v level in all shape and size in cement mortar 1 ratio 6 1 cement 6 coarse sand , half brick masonary with common burnt clay f.p.s non modular bricks of class designation 7.5 in superstures above plinth level up to floor v level cement mortar 1 ratio 4 1 cement 4 coarse sand, 12 mm cement plaster of mix 1 ratio 6 1 cement 6 fine sand rate for external plastic are for height upto 10 from grond level in less otherwise stated., repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq.mt and under incldingcutting the patches in proper shape raking out joints and preparing and plastering the surface of the walls complete as per directions of engineer-in -charge., neat cement punning. , providing and fixing 1st quality ceramic glazed floor tiles conforming to is 15622 thickness to be specified by the manufacturer of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by engineer in charge in skirting, risers of steps and dados over 12 mm thick bed or cement mortar 1 ratio 3 1 cement 3 coarse sand and jointing with grey cement slurry at the rate 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. , white washing with lime to give an even shade a) satna lime wash on walls with one coat. , white washing with lime to give an even shade old work one or more coats, finishing walls with water proofing cement paint of required shade new work two or more coats applied at the rate 3.84 kg per 10 sqm , distempering with 1st quality acrylic distemper ready made having voc content less than 50 gm per ltr. of approved manufacturer and of required shade and colour complete as per manufacturers specification. one or more coats on old work , painting with synthetic enamel paint of approved brand and manufacture of req

Corporations/Associations/Others

CTN :41964516

03 Oct, 2025 10.97 Lacs

Multi City - Karnataka

Tender For supplying and installation of solar light in shedbal tp limit for year 2020-21 rs. 2.00 lakhs , 2023-24 year rs. 6.32 lakhs and 2024-25 year rs. 3.00 lakhs scsp fund. - providing and fixing of house hold solar lights 12v/40ah tb.battery voltage 12v, battery 40ah, cycle charge voltage max 14.7v. cycle charge min 14.4v, standby charge voltage max 14. iv, standby charge voltage min 13.8v, terminal type bpit operating temp min 20 c 6ams charge controller including 2. nos of 7w led bulbs with wiring incasing patti fitting including all materials and labour charges.

Corporations/Associations/Others

CTN :41964517

03 Oct, 2025 2.83 Lacs

Multi City - Karnataka

Tender For supplying and installation of solar light in shedbal tp limit for year 2023-24 rs. 1.72 lakhs and 2024-25 year rs. 1.40 lakhs. sfc 7.25 fund - providing and fixing of house hold solar lights 12v/40ah tb.battery voltage 12v, battery 40ah, cycle charge voltage max 14.7v. cycle charge min 14.4v, standby charge voltage max 14. iv, standby charge voltage min 13.8v, terminal type bpit operating temp min 20 c 6ams charge controller including 2. nos of 7w led bulbs with wiring incasing patti fitting including all materials and labour charges.

Iv Stand Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors