Get complete information related to latest Jersey Sale Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Jersey Sale Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Jersey Sale Tenders.
Tender For supply of excavating conveyor belt for frm-85 machine plasser part no. re-20.725.500mm nylon 31 5/3 (3 ply hd) cleats type 19500mm long open end with 5 mm top and 1.5 mm bottom rubber cover 10m m thick approx. with cleats placed 75 mm away from the ends as per attached specification no. tm/hm/1/ fb-001 [ make plasser, dunlop, nirlon, mrf, mr, virshubh, biswas & jagriti ]
Tender For tender for supply of pin cotter split ms 5mm 30mm long , pin 12mm dia x 75mm long , rope , manila h by l 3 strand gr-3 - 8mm dia , spike , bolt csk m10 x 35mm , cap valve , pin eccentric m16x75mm long , bolt csk head m16x65mm long , clamp , hose , screew driver 6 inch , pin 41.774mmx90mm long , v belt a-51 , scissors 8 in , bolt hex head m16 x 70mm long , brush steel wire scratch 64mm , ring coupling , clamp wire bolted double throat 12mm , clamp , hose with cheese headed bolt , pin locking , hammer , sledge double face , 3 kg , spike bridging , ring retaining nylon m8 , gauge , nut coupling , rope manila h by l 3 strands gr-3 , 64mm dia , patch fabric nylon kk200 , 150x600mm , sleeves flexible below type , abrasibe cloth emery or corundum is grit no 80 , strap saddle assy , gauge pressure 0 kpa to 49 kpa , clamp wire rope bolt double throated 16mm dia , wrench valve , pressure gauge , jacket life 92 cm , jackets life 102 cm , bag , repair (14-246) , crank , hand folding , connecting hose 10 mtr long , handle carrying with hook , slings rope swr 32 mm dia 9.1 m long , valve charging , wrench , special , hose connector polyvinyl chloride 25mm id x 31 mm od x 10 m long , packing case for float , machine pulling & lifting universal 3 tonne 1a , pedestal assembly(lifting jack) , rope , drum padestal , paulin assembly float , paulin assy launching roller
Tender For providing and installation of children play equipments in municipal park near h.no.ru-335, ru block pitampura, ward no.57 under keshavpuram zone - providing and installation of children play equipments in municipal park near h.no.ru-335, ru block pitampura, ward no.57 under keshavpuram zone, supply and fixing of double arch swing.leg support :80 mm nb pipe. seat- anti skid rubber belt. bearing : heavy duty ball bearing. area : 6.0 m x 1.5 m. height : 2.6 m. top bar :50 mm nb pipe. suspension: 6 mm rubber coated chain. in this one child can enjoy the swing at one time. the arch shaped side frame shall be made of 80mm nb b class gi pipe shall be made up of 50mm nb b class gi pipe. the frame shall be powder coated to give an aesthetic look. the swing shall be made up of 10mm thick anti skid rubber top the rubber belt seat/ u shape swing seat with 2 eye bolt tyb-s06. made of polyurethane of size 53 x 20.5 x 20 shall be suspended on 6mm rubber coated gi chair. the bail bearings shall be mounted inside a specially designed nylon clamp. powder coating with pure polymer powder with 7 tank treatment 60 to 70 micron thickness. the holding down/fixing of equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size) (as per direction of officer in charge.), supply and fixing of toddler swing.the area :- 2.8m x 1.0m . in this toddler swing the center support shall be made up of 80 mm nb b class g.i. pipe. the horizontal bars shall be made up of 50 mm nb b class g.i. pipe. all gi pipes shall be powder coated. between the two horizontal bars there shall be a heavy-duty metal clamp attached to it. the bucket seats of the toddler swing shall be made of rubber with anti skid. the ball bearings shall be mounted inside specially designed nylon balls. the rubber seat shall be affixed on 8 mm thick gi chain. the seats shall be made with full care so that the child does not fall from it while swinging. powder coating with pure polymer powder with 7 tank treatment 60 to 70 micron thickness. the holding down/fixing of equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size) (as per direction of officer in charge.), supply and fixing of spiral slide. ladder-frame- 25m m n b pipe. handrail - 20 mm n b pipe. centre support- 50 mm n b pipe. area : 2.5 m x3.5 m. platform height : 2.1 m. chute f r p the topcoat is done using the best quality brand or duly powder coated. spiral slide shall be chute made of frp (fiber reinforced plastic / lldpe (low linear density poly ethyline) having thickness of 4mm slide center support shall be 80mm nb b lass gi pipe. landing module shall be supported by 20mm nb b class gi pipe. slide extension platform shall be made from frp / lldpe. the railing shall be made from 15mm nb and 20nn nb b class gi pipe. all pipes shall be coated with pure polymer powder with 7 tank treatment 60 to 70 micron thickness. the holding down/fixing of equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size) (as per direction of officer in charge.), supply and fixing of std. see sawhandle :-20 mm n b pipe. lever-32 mm n b pipe. colmun : 60 mm n b pipe. bearing : nylon bush press fitted. seats: frp seats with steel frame. the topcoat is duly powder coated. the level of see saw shall be made from 15, 20 and 25mm nb b class gi pipe. the seat of see saw shall be made from frp/lldpe. the stand and bush bearing made in 40mm nb b class gi pipe. see saw lever shall be welded to 5mm thickness ms plate for nut bolting with stand. all pipes flat shall be powder coated to avoid rusting. coating with pure polymer powder with 7 tank treatment 60 to 70 micron thickness. the holding down/fixing of equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size)c37c40c41c39 (as per direction of officer
Tender For providing and installation /fixing of children play equipment at navkunj apartment in patparganj ac-57. - providing and fixing double arch swing of make kompan/ leo/koochie/hugo/arihant. the arch shaped side frame of the double arch swing is made up of 80 nb gi pipe and top pipe is made up of 50 nb gi pipe. the frame is powder coated to give an aesthetic look. seats-belt type seats made of synthetic rubberized material/fiber reinforced fabric materials of virgin reinforced material. the belt seat is suspended on 6 mm rubber coated gi chain. the ball bearings are mounted inside a specially designed nylon clamp. all complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, cc block 1:2:4 (1 cement:2 coarse sand :4 graded stone aggregate 20mm nominal size ) of required size as per department / manufacturers specifications and guidelines including maintenance cost for 1st year. for the laying of foundation of equipment cc work shall be paid separately., providing & fixing of animal mgr of make kompan/ leo/koochie/hugo/arihant.. bearing heavy duty ball bearing, capacity 4 child, center pipe 2 inch g.i. pipe, diameter 2.0 mtr. dia, handle2 5 mm od g.i pipe, outer frame 32mm od g.i pipe, size dia 2.0 mtr. , height-4 ft, usage/application outdoor playground. the center support of the is made up of 50 nb gi pipe. the pure polyester powder coating done on the pipes extends the life of equipment. all complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, c:c block 1:2:4 (1cement 2 coarse sand 4 graded stone aggregate 20mm nominal size) of required size as per department / manufacturers specifications. for the laying of foundation of equipment cc work shall be paid separately., providing and fixing of multi seater see saw of make kompan/ leo/koochie/hugo/arihant.. size (0.300 m 2.50 m product area) with plank fabricated from 76 mm od pipe and support stand from 58mm od galvanized-iron pipe, complete with roto molded seats and handles. the entire unit is securely anchored into a cement-concrete block foundation after deep excavation and earthwork, including all necessary fixing arrangements. the designated safe play zone measures 2.8 m 4 m, and the see-saw is designed for children aged 3 10 years, accommodating up to four friends riding simultaneously. all complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, c:c block 1:2:4 (1) cement :2 coarse sand:4 graded stone aggregate 20 mm nominal size) of required size as per department / manufacturers specifications. for the laying of foundation of equipment cc work shall be paid separately., providing & installing of a swing of make kompan/ leo/koochie/hugo/arihant.. size 3.10x 1.50mtr. main frame: - main cross bar made of round 76 o.d. pipe and legs made of 58 od pipe legs. t pipe will be required for the cross bar. all the pipes should be isi marked as per the is 1239/2004 ) & of reputed brand. ensuring the strength, durability, stability & pan long life to the kids. structure with safety as paramount. seats-belt type seats made of synthetic rubberized material/fiber reinforced fabric materials of virgin reinforced material & also duly with uv resistant colors, chain made of approx. 6mm thick gi chain with rubberized coating of with 3 mm minimum thickness, chrome plated supporting hook for belts hooks for convenience & height adjustment/ seat movement, self lubricated council type bush baring clamps provided with rubber coated chain to be hang the complete belt assembly. the complete structure double art swing should be powder coated with minimum powder coating thickness of 60-80 microns. accessories: nut bolts to be used all approved gi nut bolts
Tender For echp-ii- loading and transporting of 305 mtrs. sh belt two drum at central stores ttps with specification of 1800mm bw, 5 ply 5,3, 1800 kn n nyon nylon and unloading to conveyor -61 and erected of 305 mtrs. in the conveyor-61.
Tender For echp-ii- loading of 300 mtrs. sh belt at conveyor-65 with specification of 1800mm bw 5 ply, 5 3, 1800kn n, nylon nylon and transported to conveyor-48a b and erected in the conveyor 48a b for replacing the damaged belt.