Web Analytics Made Easy - StatCounter

Jublee Clip Tenders

Get complete information related to latest Jublee Clip Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Jublee Clip Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Jublee Clip Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

Central Government/Public Sector

CTN :41640814 Due date: 27 Oct, 202527 Oct, 2025 NA
Tender For corrigendum : supply of water tank assembly (l.h.) (455 ltrs) & water tank assly.(455 liters) two piece r.h. and use high tensile fasteners for critical application as per design l. no. md46111 dated 06.08.2025.

State Government

CTN :41900544 Due date: 06 Oct, 202506 Oct, 2025 4.00 Crore
Tender For manufacture and supply of complete coal burner assembly with burner body, tilt tie rod and fasteners etc. for 2x660 mw ph ii sstpp dongalia

State Government

CTN :41904696 Due date: 06 Oct, 202506 Oct, 2025 87.13 Lacs
Tender For procurement of full round and half round screen plates with fasteners, lifting shelves and deflector shelves with fasteners for rotary breaker installed at 4x210mw chp i, sgtps, mppgcl, birsinghpur.

Central Government/Public Sector

CTN :41992621 Due date: 17 Oct, 202517 Oct, 2025 NA
Tender For corrigendum : retention tank for lhb coaches (without flushing arrangement). sticker for bio-tank to drg. no. icf/std-6-4-048 alt b item 1 is in the scope of supplier as per spec mdts 26001 rev-04. note: safety clause must be followed according to annexure-a of dy.cple-ii l.no.rcf/emp/1 dated 01.04.2025 and use high tensile fasteners for critical application as per design l.no. md46111 dated 06/08/2025, as per drawing no.mi006418 alt c and mtds 26001 rev-04 is applicable (flushing arrangement to clause 3.5 is not in scope of supply), installation & commissioning: inclusive, packing instruction no.pi100 ver1.0. [ warrantyperiod: 84 months after the date of delivery ]

State Government

CTN :42063454 Due date: 08 Oct, 202508 Oct, 2025 1.77 Crore
Tender For corrigendum : procurement of complete euroflex make coupling and its spares installed in boiler feed pump, hydro coupling and motor for unit no.1 and 2 at sgtps, birsinghpur - complete euroflex make coupling between motor & voith hydro coupling (including both side hubs, middle spacer , set of element assembly & set of fasteners) coupling model no. 8gbl-330-s, drg no. 41027-00, complete euroflex make coupling between hydraulic coupling & boiler feed pump (including both side hubs, middle spacer , set of element assembly & set of fasteners) coupling model no. hbs 1500-8, drg no. 31044-00, set of element assembly for coupling between motor & voith hydro coupling (01 set = 02 nos. element assembly) coupling model no. 8gbl-330-s, drg no. 41027-00, set of element assembly for coupling between hydraulic coupling & boiler feed pump (01 set = 02 nos. element assembly) coupling model no. hbs 1500-8, drg no. 31044-00, .

corporations/Associations/Others

CTN :42130656 Due date: 24 Oct, 202524 Oct, 2025 NA
Tender For supply of cutting edges end bits fasteners for track dozer wheel dozer : - 1600005486 bolt pn 5p8823 , 1600004998 nut pn 3k9770 , 1600005238 washer pn 4k0684 , 1600031507 bit end pn 8e4545 , 1600017058 bt end pn 8e4546 , 1600031508 edge cutting pn 9w4494 , 1600031509 edge cutting pn 9w4495 , 1600093044 cutting edge pn 452wa11954 , 1600008130 bolt pn 452wa11987 , 1600005186 nut pn 452wa11168 2347032290 452wa11168 , 1600006898 washer pn cfw0520060 cfw0520060 , 1600017369 cutting edge pn 41e7015221 , 1600017507 end bit pn 1757021126 , 1600025038 bit end rh 1757021136 , 1600002934 bolt pn 0209011485 , 1600027085 nut 1757111530 , 1600025037 washer 0164322245 , 1600034647 edge cutting , 1600025909 bit end lh 1957111173 , 1600025910 bit end rh 1957111183 , 1600002935 nut pn 0229011625 cfn4311625 , 1600031455 washer pn cfw0527080 , 1600006731 bolt pn bfb3511697

CTN :42131867 Due date: 24 Oct, 202524 Oct, 2025 NA
Tender For supply of dismantling of old worn out false ceiling material with frame structure of xtr hall and other technical area, shifting and disposal of dismantled debris material from outside of office premises , providing, fabrication and fixing of false ceiling in transmitter hall and other technical area at leh, ladakh as per respective drawings , providing and applying of 50mmx50mmx12mm wooden cornice as per approved profile at all around false ceiling in transmitter hall and other technical area at leh, ladakh , dismantling of old worn out wall paneling with frame structure of transmitter hall and other technical area, shifting and disposal of dismantled debris material from outside of office premises , providing, fabrication and fixing of wall paneling treatment in transmitter hall and technical area at leh ladakh as per respective drawings , providing, fabrication and fixing of cedar or teak wooden planks 75 mm x 15 mm in transmitter hall and other technical area at leh ladakh , providing, fabrication and fixing of cedar or teak wooden skirting 125mm x 15mm in transmitter hall and other technical area at leh ladakh , providing, fabrication, fixing and polishing of wooden table for transmitter hall with console table top 25mm thick wooden board or commercial ply with 1mm thick sunmica sheet , providing, fabrication, fixing and polishing of heavy duty wooden workshop table with top made up of 25mm thick wood plank on top and wooden batten frame with wooden beading and moulding , providing and applying of wall finish, putty and pop on walls to make smooth finish for premium emulsion paint at transmitter hall and technical area, after touching on corners etc , providing and applying 2 coats of wall primer and water based luxury emulsion paint on false ceiling and walls surface in xtr hall and technical area, after touching on corners, joints and screw heads , wooden surface to be cleaned and wooden putty to be applied and after rubbing with appropriate sand paper to smooth the surface two or more coat of wooden polish to be applied in wainscot and doors , fixing of 2ftx2ft recessed led light fixtures, as per respective drawings, supply of 1.5 sq.mm single core copper cable with laying and wiring of recessed mounted led light and make ready , fixing of 1ftx1ft recessed led light fixtures, as per respective drawings, supply of 1.5 sq.mm single core copper cable with laying and wiring of recessed mounted led light and make ready dismantling of old worn out false ceiling material with frame structure of transmitter hall & other technical area, shifting & disposal of dismantled debris material from the outside of the office premises., providing, fabrication and fixing of false ceiling in transmitter hall & other technical area at leh (ladakh) as per drawing sg-10150, 10178/4 and respective drawings. description of scope as per measurement taken at site: providing, fabrication and fixing of g.i metal 22 swg channel (size of channel in mm: 15 x 50 x 50 x15) frame structure base channel frame of transmission booth studio, control room, talk studio and other technical area. providing, fabrication and fixing of frame structure with gi metal sheet channel. for hanging arrangement wall to wall 40mm x 40mm x 2mm ms slotted angles with strap hangers shall be provide as per site requirements to support the gi frame structure. these slotted angles shall be further supported 8mm ms tie rods and 10mm ms fasteners from the real ceiling to make the entire structure in level and //bid details 2 / 24

corporations/Associations/Others

CTN :42132128 Due date: 09 Oct, 202509 Oct, 2025 5.04 Lacs
Tender For supply of fasteners for dtps, anpara

Central Government / Public Sector

CTN :42132921 Due date: 13 Oct, 202513 Oct, 2025 NA
Tender For procurement of spares for rim seal fire protection system - linear heat detector,adw-535-1,rim seal , sensor tube ss-316 (60 mtr coil, rim seal , junction box , shell plate , foam discharge nozzles, , rim seal auto actuation foam discharge valve , rim seal manual isolation valve , rim seal safety/over pressure relief valv , flame proof pressure switch , solenoid valve for rim seal fire protection system , pressure gauge , rim seal level gauge , fire call stations,manual in red colour , hooter , n2 charging manifold,rim seal fire protn , nozzle manifold,foam cplg , rim seal sensor tube start fittings , rim seal sensor tube end fittings , pressure transmitters , rubber grommet with frame & fasteners , annunciator unit , smps for rim seal fire protection system , digital input card+plug , plc,prefabricated cables , 16 channel relay , digital input barriers , rs232/ rs485 converter , central processing unit module , plc engg station with soe functionality

Central Government/Public Sector

CTN :42134190 Due date: 13 Oct, 202513 Oct, 2025 NA
Tender For supply of gal fasteners : - gal hex head scr gra 8.8 m10x40 is1364 , gal hex scr m10x50 gra8.8 is1364 , gal hex nut m10 gr 8 is 1364 , gal spring washer sc10 gr 4.6 is 3063 , gal plain punched washer a10 is 2016 , gal screw hex m20x60 b10.9 is 1363 , gal hex nut m20 gr 8 is1364 , gal spring washer sc20 is 3063 , gal punched washer a20 gr4.6 is 2016 , gal spring washer sc30 is 3063 , gal punched washer a30 gr 4.6 is 2016 , gal pln. washer-10.5idxod30x2.5-is5370 , gal pln.washer-10.5 idxod45x2.5 is5370
 Loading, Please wait...

Connect us via What's Up