Latest jumping cushion Tenders | Government jumping cushion Tenders

CTN :41278131

16 Aug, 2025 5.88 Lacs

Thiruvananthapuram - Kerala

Tender For one panchayath one playground - development of ground in sathyan nagar estate ward in nemom lac, thiruvananthapuram - supply and installation of outdoor gym equipment - retender

Corporations/Associations/Others

CTN :41206463

04 Aug, 2025 20.65 Lacs

Nagpur - Maharashtra

Tender For proposed estimate for providing and fixing playground equipment at open space at porkute layout

Corporations/Associations/Others

CTN :41206518

04 Aug, 2025 20.79 Lacs

Nagpur - Maharashtra

Tender For proposed estimate for providing and fixing playground equipment and benches at open space - yojana, proposed estimate for providing and fixing playground equipment and benches at open space at m.c.kalmeshwar-bramhni dist.-nagpur

State Government

CTN :41219129

02 Aug, 2025 12.68 Lacs

Delhi - Delhi

Tender For providing and installation /fixing of children play equipment at navkunj apartment in patparganj ac-57. - providing and fixing double arch swing of make kompan/ leo/koochie/hugo/arihant. the arch shaped side frame of the double arch swing is made up of 80 nb gi pipe and top pipe is made up of 50 nb gi pipe. the frame is powder coated to give an aesthetic look. seats-belt type seats made of synthetic rubberized material/fiber reinforced fabric materials of virgin reinforced material. the belt seat is suspended on 6 mm rubber coated gi chain. the ball bearings are mounted inside a specially designed nylon clamp. all complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, cc block 1:2:4 (1 cement:2 coarse sand :4 graded stone aggregate 20mm nominal size ) of required size as per department / manufacturers specifications and guidelines including maintenance cost for 1st year. for the laying of foundation of equipment cc work shall be paid separately., providing & fixing of animal mgr of make kompan/ leo/koochie/hugo/arihant.. bearing heavy duty ball bearing, capacity 4 child, center pipe 2 inch g.i. pipe, diameter 2.0 mtr. dia, handle2 5 mm od g.i pipe, outer frame 32mm od g.i pipe, size dia 2.0 mtr. , height-4 ft, usage/application outdoor playground. the center support of the is made up of 50 nb gi pipe. the pure polyester powder coating done on the pipes extends the life of equipment. all complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, c:c block 1:2:4 (1cement 2 coarse sand 4 graded stone aggregate 20mm nominal size) of required size as per department / manufacturers specifications. for the laying of foundation of equipment cc work shall be paid separately., providing and fixing of multi seater see saw of make kompan/ leo/koochie/hugo/arihant.. size (0.300 m 2.50 m product area) with plank fabricated from 76 mm od pipe and support stand from 58mm od galvanized-iron pipe, complete with roto molded seats and handles. the entire unit is securely anchored into a cement-concrete block foundation after deep excavation and earthwork, including all necessary fixing arrangements. the designated safe play zone measures 2.8 m 4 m, and the see-saw is designed for children aged 3 10 years, accommodating up to four friends riding simultaneously. all complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, c:c block 1:2:4 (1) cement :2 coarse sand:4 graded stone aggregate 20 mm nominal size) of required size as per department / manufacturers specifications. for the laying of foundation of equipment cc work shall be paid separately., providing & installing of a swing of make kompan/ leo/koochie/hugo/arihant.. size 3.10x 1.50mtr. main frame: - main cross bar made of round 76 o.d. pipe and legs made of 58 od pipe legs. t pipe will be required for the cross bar. all the pipes should be isi marked as per the is 1239/2004 ) & of reputed brand. ensuring the strength, durability, stability & pan long life to the kids. structure with safety as paramount. seats-belt type seats made of synthetic rubberized material/fiber reinforced fabric materials of virgin reinforced material & also duly with uv resistant colors, chain made of approx. 6mm thick gi chain with rubberized coating of with 3 mm minimum thickness, chrome plated supporting hook for belts hooks for convenience & height adjustment/ seat movement, self lubricated council type bush baring clamps provided with rubber coated chain to be hang the complete belt assembly. the complete structure double art swing should be powder coated with minimum powder coating thickness of 60-80 microns. accessories: nut bolts to be used all approved gi nut bolts

State Government

CTN :41255707

08 Aug, 2025 NA

Bharuch - Gujarat

Tender For supply of parallel bar - outdoor gym equipment (q3) , seesaw for playground (v2) (q3) , outdoor slide (v2) (q4)

corporations/Associations/Others

CTN :41177479

04 Aug, 2025 NA

Pune - Maharashtra

Tender For estimate for rescue purpose equipments - estimate of rescue purpose tool, round pneumatic lifting bag, jumping cushion 20 m jumping height, jumping cushion 30 m jumping height, positive pressure ventilator petrol engine driven having 33,000m3/h open air flow, positive pressure ventilator petrol engine driven having 52,000m3/h open air flow, positive pressure ventilator petrol engine driven having 68,000m3/h open air flow, positive pressure ventilator petrol engine driven having 29,000m3/h open air flow, hooligan tool with standard claw, percussive rescue tool kit

CTN :41150377

30 Jul, 2025 NA

East Champaran - Bihar

Tender For supply of twister - outdoor gym equipment (q3) , air walker / stroller - outdoor gym equipment (q3) , outdoor slide (v2) (q4) , parallel bar - outdoor gym equipment (q3) , surf board - outdoor gym equipment (q3) , sit up board - outdoor gym equipment (q3) , shoulder builder / arm wheel - outdoor gym equipment (q3) , leg press - outdoor gym equipments (q3) , garden swings (q3) , seesaw for playground (v2) (q3)

CTN :41136916

29 Jul, 2025 NA

East Champaran - Bihar

Tender For supply of twister - outdoor gym equipment,air walker / stroller - outdoor gym equipment,outdoor slide (v2),parallel bar - outdoor gym equipment,surf board - outdoor gym equipment,sit up board - outdoor gym equipment,shoulder builder / arm wheel - outdoor gym equipment,leg press - outdoor gym equipments,garden swings,seesaw for playground (v2),air walker / stroller - outdoor gym equipment,twister - outdoor gym equipment

CTN :41043092

28 Jul, 2025 5.88 Lacs

Thiruvananthapuram - Kerala

Tender For one panchayath one playground - development of ground in sathyan nagar estate ward in nemom lac, thiruvananthapuram - supply and installation of outdoor gym equipment - gym equipments (18% gst), od40855/2025-2026 : horse rider - supply and installation of horse rider having the following specifications: dimensions: (l x w x h) 1140 x 400 x 1400 mm. main frame - 114 mm od b class gi pipe. foundation plate m.s. round plate of 250 mm & 8 mm thick. foundation cover cap -dome shape of pp / nylon / hdpe material. remaining frame is made by 48 mm od b class gi pipe. seat frame is madeby 48 mm od b class gi pipe. seat position must be horizontal to 110 -120 degree. link - made up of 48 mm od b class g.i. pipe. angle between link and ground position is 10-20 degree. handle - 33 mm od b class gi pipe. paddle vertical support - 60 mm od b class gi pipe. handle frame- 42 mm od b class gi pipe dually bending design. foot pipe - 33 mm od b class gi pipe. support frame 10 mm thick ms flat is used. seat- dimension 320 x 270 x 100 mm blow moulded wall thickness 4mm material hdpe. bearing bush closing cap pp /nylon / hdpe material. foundation stool: made from main pipe 88 mm od m.s pipe and top support of m.s. round plate of 250 mm & 8 mm thickness is welded at top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing - use is 6005 permanent lubricated reputed brand. bearing bushes - 60mm od seamless pipe. pin made of 25 mm m.s. bright bar. grips - high quality rubber 46 mm od. circlips a 24 circlips are used for assembly. coating - best quality of powder coating 60 to 70 micron. safety instructions and exercise chart - start & finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing., od40856/2025-2026 : back extension - supply and installation of back extension having the following specifications: dimensions: (l x w x h) 1060 x 730 x 990 mm. main frame - made from 88 mm od b class g.i. pipe. foundation plate m.s. round plate of 250 mm & 8 mm thick. leg support - 42 mm od b g.i pipe. seat rest pipe 42 mm od b class g.i pipe. handle pipe 33 mm od b class g.i pipe. footrest - cast iron 124 x 296 x 5 mm thick and m.s plate of 3 mm thick used to support it. footrest pipe 42 mm od b class g.i pipe and 80 x 40 mm ms rectangular pipe. closing cap pp / nylon / hdpe material. seat 360 x 300 x 2 mm thick m.s. seat with corner fillet for safety. grips - high quality rubber 46 mm od. foundation stool: made from main pipe 88 mm od m.s pipe and top support of m.s. round plate of 250 mm & 8 mm thickness is welded top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. coating - best quality of powder coating 80-120 micron. safety instructions and exercise chart - start & finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing, od40857/2025-2026 : sky walker - supply and installation of sky walker having the following specifications: dimensions: (l x w x h) 1720 x 910 x 1700 mm. main frame - made of 88 mm od b class gi pipe dually bending design. foundation plate m.s. round plate of 250 mm & 8 mm thick. paddle vertical support - 42 mm od b class gi pipe. handle - 33 mm od b class gi pipe dually bending design. leg movement frame 50 mm x 50 mm x 2 mm thick square pipe. footrest - cast iron 124 x 296 x 5 mm thick and m.s. plate of 2 mm thick use for to support it. top closing cap dome shape made by pp / nylon / hdpe material. closing caps pp / nylon / hdpe material. foundation stool: made from main pipe 88 mm m.s pipe. and top support of m.s. round plate of 250 mm &a

Jumping Cushion Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Corporations/Associations/Others

Corporations/Associations/Others

State Government

State Government

corporations/Associations/Others