Latest kitchen equipments Tenders | Government kitchen equipments Tenders

CTN :39760544

28 Mar, 2025 9.28 Lacs

Multi City - Multi State

Tender For upgradation of infrastructural facilities for regional training institute chennaisubwork/packages:sitc of kitchen equipments and exhaust and fresh air system to the rti cpwd kk nagar

CTN :39742846

26 Mar, 2025 18.40 Lacs

Multi City - Multi State

Tender For maintenance of e&m services at supreme court of india new delhisubwork/packages:comprehensive annual maintenance of kitchen equipments

State Government

CTN :39746829

26 Mar, 2025 8.49 Lacs

Pondicherry - Pondicherry

Tender For supplying and installation for kitchen equipments at rggwch, puducherry.

corporations/Associations/Others

CTN :39730913

08 Apr, 2025 2.25 Lacs

Delhi - Delhi

Tender For tender for supply of camc of kitchen equipments and png pipeline - 02 nos dough kneading machine , 05 nos food service trolley , 01 nos pulvanizer , 02 nos mixer grinder , 01 nos potato peeler , 02 nos refrigerator , 01 nos exhaust hood with centrifugal blower , 01 nos chapatti plate cum puffer , 01 nos six burner cooking range , 03 nos digital weighing machine , 01 nos internal png pipeline and spares with paint

CTN :39713929

07 Apr, 2025 67.54 Lacs

Thiruvarur - Tamil Nadu

Tender For providing kitchen equipments and its accessories for two mess block of boys hostel and girls hostel cutn thiruvarursubwork/packages:providing kitchen equipments and its accessories for two mess block of boys hostel and girls hostel cutn thiruvarur-supplying, installation, testing, and commissioning of 100 kg/hr gas-operated steam boiler for kitchen application including all accessories etc., as required.a) gas-operated steam boiler.design: coil type, forced circulation typemaximum steam output (@100deg c): 100 kg/hroutlet steam condition: dry, saturatedmax. working pressure: 10 kg/cm2max. operating pressure: 3 kg/cm2safety valve set pressure: 10 kg/cm2thermal efficiency: 90% +/- 2%power supply: ac, 3 ph, 415v, 50 hz, 4-wire systemb) mountings & fittings detailsmain steam stop valve- 25 mm nb-1 no.safety valve - 15 mm nb-2 nos.shell blow down valve 25 mm nb-1 no.air vent valve - 15 mm nb-1 no.isolation valve along with pressure guage - 1 no.c) feed water pump and tank. type: reciprocating, piston typepump capacity: 100 lphhead: 115 mwcoutlet steam condition: dry, saturatedd) burnerfuel: lpgtype: monoblockfuel consumption: 5.5 kg/hre) m.s. straight chimney, with ladder, base plate, nuts & bolts, template for foundation, foundation bolts, including painted with heat resistant aluminium paint and foundation etc., as required.diameter: 150 mmheight - 6 m (vertical) + 3m (horizontal connecting pipe from boiler to chimney)sheet thickness - 5 mmf) feed water tankpvc water tank capacity- 500 litretank having valves, strainer, drain pipe & level indicator, with ms structure (height-2m)tank thickness - 3 mmf) pressure reducing stationnon-ibr prs - steam pressure reducing station for upstream pressure of 10 kg/cm2, downstream pressure of upto 3 kg/cm2, complete with valves, safety valve, pressure gauges, steam trap assembly, prv, inter-connecting pipeline etc.g) softner plant along with interconnecting pipe and its accessories.capacity: 1.5 m3/hroutlet design hardness: < 5 ppmvessel moc: frppiping moc: upvcoperating pressure: 3.5 kg/cm2capacity of brine tank: 80 litremoc of brine tank: lldpeh) softener feed water pump with electrical starterflow rate - 1 m3/hrhead: 35 meteroperating voltage: 3 phase, 415 volts(make: thermax/ thermodye /southern boilers)supplying, laying/ fixing, testing and commissioning of following nominal sizes of seamless c-class heavy duty ms non - ibr steam piping plumbing inside the building (with necessary clamps, vibration isolators and fittings including valves, and flexible steam pipe for connecting to steam vessel etc.) duly insulated with fire retardant quality expanded thermal mineral wool and finally applying 0.63mm aluminium sheet cladding complete, repairing of damage to building etc. as per specifications and as required complete in all respect.40 mm (32 mm thick insulation)25 mm (19 mm thick insulation)20 mm (19 mm thick insulation)supplying, installation, testing and commissioning of tiltable steam operated double jacket rice vessel with lid of 25 kg capacity etc., as required.it is made out of a 14 swg 304-grade ss sheet with a bottom perforation plate and funnel at the bottom drain kanji. the lid is made out of 20 swg sheets. this unit has a drainage valve, ss handle, and ss stand made out of 14 swg 304 grade ss sheet with bottom.supplying, installation, testing and commissioning of tiltable steam operated double jacket dhall steam vessel with lid of 75 litre capacity etc., as required.it is made out of a 14swg 304-grade ss sheet with a bottom perforation plate and funnel at the bottom drain kanji. the lid is made out of 16 swg sheets. this unit has a drainage valve, ss handle, and ss stand made out of 14 swg 304 grade ss sheet with bottom.supplying, installation, testing and commissioning of tiltable steam operated double jacket milk steam vessel with lid - 100 litre capacity etc., as required.it is made out of a 14swg 304-grade ss sheet with a bottom perforation plate and funnel at the

CTN :39750114

29 Mar, 2025 NA

Trivandrum - Kerala

Tender For setting up of three star beach resort at muzhuppilangad, kannur _ civil and electrical works (furniture, main gate, landscape, kitchen equipments vcb and television)

Co-operative

CTN :39603779

21 Mar, 2025 24.83 Lacs

Bengaluru - Karnataka

Tender For supply erection testing installation of kitchen equipments for cattle feed plant at rajanukunte-, rice vessel with stand, a) vessel shall be of 16g ss of inner size 23" diax23" deep., b) stand frame structure shall be of 16g 50mm dia ss pipe., c) 18g ss lid shall be fitted with frame structure for vessel., d) 25mm diass pipe handle shall be provided for tilting the vessel., e) 16g ss perforated sheet shall be provided for vessel as a strainer., f) cross supports shall be provided on 3 sides with front open., g) 25mm dia drain outlet shall be provided for vessel., h) ss grouting plate shall be provided for grouting., i) steam inlet shall be provided on right hand side of the unit., samber vessel with stand, a) vessel shall be of 16g ss of inner size 20" diax20" deep., b) stand frame structure shall be of 16g 50mm dia ss pipe., c) 18g ss lid shall be fitted with frame structure for vessel., d) 25mm diass pipe handle shall be provided for tilting the vessel., e) 16g ss perforated sheet shall be provided for vessel as a strainer., f) cross supports shall be provided on 3 sides with front open., g) 25mm dia drain outlet shall be provided for vessel., h) ss grouting plate shall be provided for grouting., i) steam inlet shall be provided on right hand side of the unit., idli box with stand and also with idli side table with 2 under shelves (600 x 600 x 850+150) & splash back, a) 16g ss 304 quality double layered chamber., b) 3 nos. idli chamber decks of 3 trays per deck. each tray shall be 20 idlis capacity., c) 12 nos. 20g ss 304 quality idli trays with perforation., d) 12 nos ss drip trays below idli tray., e) front water collection tray for idli stand., f) 38mm dia 16swg ss 304 quality pipe uprights with 3 sides 25mm dia 16swg ss 304 quality cross supports with nylon bullet feet., g) ss door with rubber gaskets shall be provided., h) unit shall be provided with independent steam control valve., i) steam inlet shall be provided on right hand side of the unit., plate rack of five shelves, a) the verticals shall be in ss 38mm dia 16g 304 quality pipes with adjustable nylon bullet feets, b) the shelves of 18g 304 grade shall be down beeded 38mm on all sides and 12mm towards inside., c) bottom shelf shall be provided 150mm above & remaining spaced equally., two burner cooking range, a) the frame work of gas range shall be 32x32x3mm thick ss angle., b) cast iron grid of size 400x400mm shall be provided over the burner., c) 20g ss 304 quality sheet with performance shall be provided on 3 sides & removable front control panel shall be of 20g ss 304 quality steel., d) 20g ss 304 quality sheet handle with ss 22 g 304 grade spillage tray below the burner wil be provided., e) bottom cross supports shall be of 25mm dia 16swg ss 304 quality pipes., f) top shall be of 16 swg ss 304 quality sheet with the cutout to receive 1 no cast iron grid., g) vertical supports shall be of 38mm dia ss pipes 16swg 304 quality with adjustable nylon bullet feet., h) gas inlets on both sides shall be given., i) two high pressure gas burner., dosa plate, a) the frame work of gas range shall be 32x32x3m thick ss angle., b) vertical supports shall be of 50mm dia ss pipes 16swg 304 quality with adjustable nylon bullet feet., c) four side drain channel shall be given with 16swg ss 304 quality splash on 3 sides., d) one piece polished 25mm thick ms dosa plate with 2 handles on either sides of size 1200x600mm., e) 2 nos. ribbon type "v" shaped burners equally placed under the ms plate to get uniform heat., f) bottom cross supports shall be 25mm dia 16swg ss 304 quality pipes., g) suitable windows with cover shall be made in the front control panel for ignition., h) gas inlets on both sides shall be given., i) 20g ss 304 quality sheet with performance shall be provided on 3 sides & removable front control panel shall be of 20g ss 304 quality steel., j) 150mm high 16g ss 304 grade splash on length side. 304 grade pipe upright with adjustable bullet feet, f

Co-operative

CTN :39603969

21 Mar, 2025 16.77 Lacs

Bengaluru - Karnataka

Tender For supply, erection, testing & installation of kitchen equipments for cattle feed plant at dharwad

Private Sector

CTN :39632750

22 Mar, 2025 NA

Gurgaon - Haryana

Tender For providing of (a) vegetables & fruits indian & imported (b) dairy products and milk (c) indian & imported cheese (d) fresh mutton (e) sea food-fresh & frozen (f) egg (g) french fries, frozen green peas, corn & other frozen items (h) ice-creams & kulfi (1) frozen pork & meat- indian & imported (j) indian provision / groceries (k) imported grocery (l) bakery products (m) cold cuts (n) soft baverage a) office printing & stationery (b) lpg, charcoal, gel fuel (c) cleaning supplies, garbage bags & carry bags (d) engineering items including hardware, sanitary ware & plywood items etc. (e) general supply (f) staff uniform (g) chemical supply (h) guest & paper supplies. (i) plants & pots (j) electrical items (a) upholstery work (b) tentage rental (c) transport services (d) paint & polishing services (e) annual maintenance contract related to hotel (f) it products (g) cartrige refilling (h) dry catering for outdoor caterings (1) housekeeping services including glass cleaning/marble polishing / horticulture services (j) fire extinguisher & refilling (k) motor rewinding. (l) annual maintenance contract of kitchen equipments

Central Government/Public Sector

CTN :39600802

31 Mar, 2025 NA

Bengaluru - Karnataka

Tender For supply and installation of kitchen equipments for hostel mess at indian institute of science, bengaluru - dry store, ss platform digital weighing scale.ss platform of size 600 x 600mm, power supply - 230v ac, 50 hz, display colour/digit - red/ green/ 6 digits, display size - 0.56" (14.22 mm), number of keys - 5 keys, battery - 6v / 4ah,, mobile ingredient bin mobile ingredient bin with slant top, sliding lid, castors & scoop.37 gal. (140 l) slant top, with scoop, a hygienic clear sliding lid, bins should made of nsf-listed, fda-accepted material, bins has to be designed with a slanted top to easily access product., ss low height platform rack (dunnage rack).38 x 38mm pipe frame structure, 38 x 38mm pipe cross support with a spacing of 70mm, 6 nos leg of 38mm sq. ss legs fitted with adjustable nylon bullet feet., ss storage rack with 4 shelves.18swg ss shelves double beaded on all sides, reinforced with 25 x 100 x 25mm hat channels, dia 38mm ss round legs fitted with adjustable nylon bullet feet., walk in cooler, walk-in cooler, +2 deg c to +8 deg c.unit should be made from 60 mm thick prefab rigid puf sandwich panels with 1mm thick ss 304 grade sheet outside and inside, the cold room should be with ceiling and wall panels interlocked through a cam lock mechanism, fitted with a hermetic sealed compressor. the condensing unit should be split type, which is air cooled. swing type and insulated door having magnetic gasket, safety latch, lock and heavy duty hinges. the room should maintain a temperature of +2 c to +8 c. all accessories like light, light switch, emergency switch, door heater, vacuum release, temperature indicator to be provided with the unit. the refrigerant used should be r 134a. flooring inside the cold room is kottah stone flooring (flooring in client scope)., perforated storage rack with 4 shelves.16swg ss shelves double beaded on all sides with perforation in entire length and width, 50 x 5 mm perforation with a spacing of 15mm, stiffed with 25 x 100 x 25mm hat channels, 38mm ss round legs fitted with adjustable nylon bullet feet., veg prep area, ss work table with 2 sink unit & 1 u/s.16swg ss sunken top double beaded on all sides, reinforced with 25x25mm ss pipe frame structure, 2 nos sink of size 450 x 450 x 300mm deep, radius corners, fitted with 38mm waste coupling, 150mm splash guard on rear and (left/right) sides, 18swg ss under shelf reinforced with ss channel with 150mm clear gap from ffl, properly soundeadned, 38x38mm sq ss legs fitted with adjustable nylon bullet feet., mixer faucet, single hole, deck mount mixing faucet.single hole deck mount mixing faucet with polished chrome plated brass body, 10 1/8" swing nozzle with full flow laminar flow device, quarter-turn ceramic cartridges, lever handles, 18" flexible stainless steel supply hoses with 1/2" npsm / 5/8" o.d. compression connections. certified to asme a112.18.1\csa b125.1, nsf 61-section 9 and nsf 372. meets ada ansi\icc a117.1 requirements., single hole single temperature deck mount faucet for ro watersingle hole single temperature deck mount faucet with polished chrome plated brass body, 5 7/8" swivel gooseneck, 2.2 gpm aerator, ceramic cartridge, lever handle and 1/2" npsm male inlet. certified to asme a112.18.1\csa b125.1, nsf 61-section 9 and nsf 372. meets ada ansi\icc a117.1 requirements., chopping table with 1 u/s.full length and full width 40mm food grade nylon chopping board supported by ss angle frame, 150mm rear splash on rear side, 18swg ss under shelf reinforced with ss channel with 150mm clear gap from ffl, properly soundeadned, 38x38mm sq ss legs fitted with adjustable nylon bullet feet., ss work table with 2 u/s.16swg ss top double beaded on all sides, reinforced with 25x25mm ss pipe frame structure, 150mm splash guard on rear side, 18swg ss under shelf reinforced with ss channel with 150mm clear gap from ffl, properly soundeadned, 38x38mm sq ss legs fitted with adjustable nylon bullet feet., commercial knife sterilize

Kitchen Equipments Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

Co-operative

Co-operative

Private Sector

Central Government/Public Sector