Latest kitchen repair Tenders | Government kitchen repair Tenders

Central Government And Public Sector

CTN :42123508

21 Oct, 2025 46.28 Lacs

Muzaffarnagar - Uttar Pradesh

Tender For supply of material and complete items of works for under the work of special repair to conservation and restoration of collapsed boundary walls of tomb of diwan saiyed mohammad khan majhera muzaffarnagar - items to be executed, u/s lime, surkhi, coarse sand, brick aggregate 20 mm-25 mm, belgiri, gum, gur, mud, modern bricks 2nd class, kail wood sleeper (3.05x 2.05x0.10 m), r.r. stone, c.r. stone, careful dismantling of roof in random rubble masonry over bhurji in lime concrete, executed manually to preserve adjacent architectural features and reusable stone material. the work shall be carried out under direction of engineer in- charge, ensuring minimal vibration and no damage to adjoining historic fabric., earth work in excavation by mechanical means (hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed,, providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia m.s. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with m.s. tubes, m.s. tube challies, m.s. clamps and m.s. staircase system in the scaffolding for working for the required duration as approved and removing it there after. the scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of engineerin- charge. the elevational area of the scaffolding shall be measured for payment purpose. the payment will be made once irrespective of duration of scaffolding., surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m, provision for removal of malba for cleaning the sites including collecting, staking and disposal of the rubbish /malba upto 100 meter lead including all the labour and transportation etc complete. out of the monuments premises and further, filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift, layer by ramming and watering, lead up to 50 and for all

Central Government/Public Sector

CTN :42128071

24 Oct, 2025 NA

Bhusawal - Maharashtra

Tender For sch. a: electrification work in connection with kherwadi - 1)provision of cover over platform i.e. (1) home hl pf & another island pf end to end at kherwadi railway station. (2) development of circulating area by providing vdc concrete surface etc. towards pf no 01 and 03 (2000 sqm) at kherwadi station. & (3) provision of boundary wall in connection with kumbh mela 2027. ; sch. b: electrification work in connection with kasbe-sukene - cop, all existing toilets to be improved. development of 8 new toilets block including divyangjan, circulating area by providing vdc.; sch. c: electrification work in connection with devlali- (1) provision of cover over platform including additional platform and old goods loops. (2) provision of approach road to be connected to extension old goods loop bsl end. (3) provision of boundary wall towards bsl end and csmt end at pf no. 01 and 02 approaches.

Central Government/Public Sector

CTN :41799867

10 Oct, 2025 NA

Raigad - Maharashtra

Tender For corrigendum : tender for supply of crc 2-26, 300 gms self spraying aerosal for elec maintainence., nexus (germany) make, two leg puller model no. 100-1.5,, dia. 25-130mm, leg: 100mm, torque: 80nm, spindle measurements:, m14 x 1.5 x 130., residual current circuit breaker [rccb], 63a 440v rating, three phase and nuetral, sensitivity 100 milliamp trip free mechanism, touch proof terminals ip20, resistance against unwanted tripping, conforming to relevant iec/bis standard, make: siemens/l and t/ legrand/havells/ge/abb/ schneider., plug top suitable for 16 amp. flameproof. weatherproof switch socket, 3 pin (2p+1e), in lm6 (cast a1) construction for single phase switch so cket. cat.no.ss/oa/1011, make: sudhir switchgear for urea plant., black ink ribbon part no lm ir508 for ferrule printing machine model lm-550a2/pc, make max co ltd. japan, reversible 2 way screw driver, magnetic hex shank, size: 6 inch, head type: one side flat/ slotted head and one side, phillips head, holder material: plastic, blade material: steel, make: taparia 905 h/jhalani/equivalent, industrial metal clad ap20 plug top 20 amp., 250 volts, cast aluminium 3 pin, crompton make, industrial metal clad ap10 plug top 10 amp 250 volts, cast aluminium 3 pin, crompton make, battery flat 9 volt of make duracell/energizer, insulation tape type p 101 frlt tape, size: 1.9 cm x 20me roll, fire retardant type, breake down voltage 2kv make permacel., battery pencil cell 1.5 volt heavy duty everedy model no.: 1015 r6/aa/um3 guaranted upto 0.6cv eveready make, battery cell 1.5volt, make: novino national neo type-r03 nt aaa, masonary (concrete) drill bit straight shank size: 4mm., masonary (concrete) drill bit straight shank size 6mm., masonary(concrete) drill bit straight shank, size: bmm, masonary (concrete) drill bit straight shank, size: 10mm, box spanner set-24 piece socket wrench set: 1/2" square, drive set-consisting of: 1-250 reversible ratchet handle, 1-250 slidin gt-bar, 1- universal joint, 1-420 mm speeder handle, 2 extension, box spanner set gadre or equivalent reputed make containing complete set of box spanner sockets, rachets, handles and other adoptors size: 6 mm to36 mm., ink ribbon case part no lm-rc500 for ferrule printing machine model lm-550a2/pc,make max co ltd. japan, heating element zero bend type. rating-2kw, 230vac, 50hz., mocnickel chromium steel complete with 1/2" bsp fixing nut. length 1350mm, suitable for surface load 3.2/cm2. as per attached drawing., motor fan for 0.75kw, 1500 rpm, 805 frame motor., coating: the fan shall be powder coated, cooling fan moc-ms., sheet thickness shall be minimum 3 mm., motor fan for 30hp (22kw)/1500 rpm 180 1 frame motor, motor fan for 75 kw, 1500 rpm (motor of ie2 class) 280 m & 280 s motors, motor fan for 75 kw, 3000 rpm, 280 s & 280 m frame size motor, motor fan for 3.7 kw,3000 rpm, motor of iez class) 132 s frame motors, moc: cast iron, motor fan for 60hp (45kw)/3000 rpm 225 s frame motor, motor fan cover for 7.5 kw, 1500 rpm, 132 m frame size motor (motor of ie2 class), moc: ms

State Government

CTN :42128435

22 Oct, 2025 73.5 Thousand

Bankura - West Bengal

Tender For toilet repairing and kitchen repairing of khejurbedya primary school

Central Government/Public Sector

CTN :41489566

13 Oct, 2025 1.00 Crore

Noida - Uttar Pradesh

Tender For corrigendum : open tender document for e-procurement of laboratory equipment (soil, aggregates, cement, reinforcing bar, concrete test equipment, water, geo-textile and geogrid) for material testing laboratory of iahe - soil, unconfined compressive strengthcompression device with digital load frame: hydraulic proving ring, dial gauge vernier callipers, timer, oven, weighing balance, shear strength vane shear apparatus, grain size analysis as per is:2720 (part- iv)pipette apparatus (i) sampling pipette (ii) glass sedimentation tubes (iii) weighing bottles (iv) deleted (v) stirring apparatus (vi) sieves -2mm, 425umm , 75umm is sieves (vii) deleted, specific gravityhydrometer apparatus: two 1000 ml graduated cylinders, dispersing agent solution containing sodiumhexa-metaphosphate, dessicator and centimetre scale., shrinkage limit testfull set of equipments 1.) evaporating dish of porcelain, 2.) spatula and straight edge, 3.) balance-sensitive to 0.01 g minimum.4.) shrinkage dish. circular, porcelain or non-corroding metal dish, 5.) glass cup. 50-55 mm in diameter and 25 mm in height,6.) glass plates. two, 75x75 mm one plate of plain glass and the other prongs, 7.) thermostatically controlled oven,8.) wash bottle containing distilled water, 9.) graduate-glass, with capacity of 25 ml. 10.) mercury., sand equivalent value(i) graduated cylinder (ii) irrigator tube (iii) siphon assembly (iv) weighted foot assembly (v) measuring can (vi) sieve -4.75mm (vii) funnel (viii) 4- litre bottle (ix) flat pan (x) timing device (xi) sand equivalent shaker, ph test -electronic method(i) ph meter (ii) digital balance 300 gm capacity-sensitive 0.001gm (iii) 100ml glass beaker -3nos. (iv) volumetric flask-500ml -nos. (v) wash bottle-100 ml (vi) mortar with rubber covered pestle, aggregates, polished stone value (i) accelerated polish machine mounted on firm ,level and non resilient base of stone or concrete (ii) road wheel (iii) means for rotating road wheel (iv) means for bringing the surface of a rubber-tyred wheel of 20 cm diameter and 5 cm breadth to bear on the stone surface of the road wheel with a total load of 40 kg. (v) means to feed the sand and water at a uniform rate (vi ) means to feed the emery powder and water at uniform rate (vii) friction tester: is: 2386 part 4 as per specification of rrl uk (viii) 25 kg hard siliceous sand (ix) emery powder 5 kg, alkali aggregate reactivitymortar bar method: scales, weights, sieves, glass graduates, specimen moulds, mixing bowl, tamper, trowel, containers, length comparator, alkali aggregate reactivity chemical method:1. electronic balance2. pulveriser3. reaction container, reagents, glassware, petrographic examination 1. geological hammer2. petrographic microscope3. screen confirming to is sieve4. digital balance5. portable handheld cutting machine6. hand lens7. glass sides etc., deleterious material & organic impuritiessedimentation pipette: a watertight screw-topped glass jar, 1000 ml measuring cylinder, chemicals, containers, sieves, cement, soundness (autoclave apparatus)graduated glass cylinders, moulds, autoclave, length comparator, compaction (mortar cube vibrator), fineness (blaine air permeability apparatus), ph meter ( 2 in nos.), reinforcing bar (steel), reinforcing bar (steel) universal testing machine,to determine unit weight, yield strength,, proof stress, ultimate tensile strength, % elongation, bend and re-bend test, concrete test equipment, vibrating table 1mx1m(full set of equipments), needle vibrator ( 2 in nos.), permeability, dry shrinkage (shrinkage apparatus) ( 2 in nos.)(full set of equipments), air content (air entrainment meter apparatus)(full set of equipments), durability (rapid chloride ion permissibility apparatus), depth of penetration (water permeability apparatus) ( 2 in nos.)(full set of equipments), water, physical analysis of water, geo textile and geogrid, pull-out resistance of geotextile /geogrid

Central Government/Public Sector

CTN :42107579

20 Oct, 2025 57.54 Lacs

East Singhbhum - Jharkhand

Tender For supply of annual civil maintenance works at ucil narwapahar township for one year - earth work in excavation by mechanical means hydraulic excavator manual means over areas exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth lead up to 50 m and lift up to 1.5 m, as directed by engineer-in-charge. all kind of soil , filling available excavated earth excluding rock in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. , providing and laying cement concrete in retaining walls, return walls, walls any thickness including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing a 1 ratio 3 ration 6 1 cement 3 coarse sand 6 20 mm stone aggregate nominal size , reinforced cement concrete work in beam,suspended floors,roofs, having slope up to 15 landings balconies, shelves,chajja,lintel,band,plain window sills,stsiarcase and spiral stair case above plinth level upto floor five level execluding the cost of centering,shuttering,finishing and reinforced with 1 ratio 1.5 ratio 3 1 cement 1.5 coarse sand 3 graded stone aggregate., centering and shuttering including strutting, propping etc. and removal of form for a) suspended floors, roofs, landing, balconies and access platform , steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level. a) thermo-mechanically treated bars of grade fe-500d or more. , brick work with common burnt clay f.p.s. non modular bricks of class designation 7.5 in superstructure above plinth level up to floor v level in all shapes and sizes in a cement mortar 1 ratio 6 1 cement 6 coarse sand , brick work with common burnt clay f.p.s non modular brick of class designation 7.5 m superstures above plinth level up to floor v level in all shape and size in cement mortar 1 ratio 6 1 cement 6 coarse sand , half brick masonary with common burnt clay f.p.s non modular bricks of class designation 7.5 in superstures above plinth level up to floor v level cement mortar 1 ratio 4 1 cement 4 coarse sand, 12 mm cement plaster of mix 1 ratio 6 1 cement 6 fine sand rate for external plastic are for height upto 10 from grond level in less otherwise stated., repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq.mt and under incldingcutting the patches in proper shape raking out joints and preparing and plastering the surface of the walls complete as per directions of engineer-in -charge., neat cement punning. , providing and fixing 1st quality ceramic glazed floor tiles conforming to is 15622 thickness to be specified by the manufacturer of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by engineer in charge in skirting, risers of steps and dados over 12 mm thick bed or cement mortar 1 ratio 3 1 cement 3 coarse sand and jointing with grey cement slurry at the rate 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. , white washing with lime to give an even shade a) satna lime wash on walls with one coat. , white washing with lime to give an even shade old work one or more coats, finishing walls with water proofing cement paint of required shade new work two or more coats applied at the rate 3.84 kg per 10 sqm , distempering with 1st quality acrylic distemper ready made having voc content less than 50 gm per ltr. of approved manufacturer and of required shade and colour complete as per manufacturers specification. one or more coats on old work , painting with synthetic enamel paint of approved brand and manufacture of req

CTN :42103388

10 Oct, 2025 2.80 Crore

Baramulla - Jammu And Kashmir

Tender For supply of ug ops room at div hq c c - hand shower 140mm round shape single flow with air effect abs body and face plate chrome plated with rubit cleaning system make jaquar cat hsh 1727 , tumbler holder complete fixed at site fully functional incl all necessary fitting and fixtures other than mentioned make jaquar cat can 1141n , towel rack 600mm long without lower hangers but with 3 hooks stainless steel , toilet roll holder make jaquar cat can 1151n , corner glass shelf with bracket make jaquar cat can 1173 , swivel mirror complete fixed at site fully functional incl all necessary fitting and fixtures other than mentioned make jaquar cat can 1195n , corner shower basket make jaquar cat can 1175n , towel ring square make jaquar cat akp 35721p , soap dish holder make jaquar cat akp 35731p , waste coupling 32mm size half thread with 80mm height incl waste pipe complete fixed at site fully functional incl all necessary fitting and fixtures other than mentioned , 600mm long braided hose with m10x1 nipple15mm nut o ring and rubber washer make jaquar cat ald 801b , angular stop cock with wall flange make jaquar cat flp 5053pm , 2 way bib cock with wall flange make jaquar cat flp 5041pm , versa horizontal manual geyser complete fixed at site fully functional incl all necessary fitting and fixtures other than mentioned make jaquar cat vrm wht hd070 , walk in panel framed in standard dimension glass 10mm finish black h 2000 w 1200 , tubes light grad galvanised as in sleeves , sand cast cast iron soil 100 mm bore waste and vent pipes in any length with or without ears with cement joints laid in trenches or in floors , 100mm cast iron sanitary connection bend 92 5 with arms 380 to 450mm excluding joint , 100 mm bore cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type b 1 1 2 4 , wrought second class hard wood in scantlings timber framed and fixed , 1 5mm thick decorative laminate type 1 of surface finish colour and pattern as approved fixed with approved adhesive as per manufacturers , glass 5 5 mm thick supplied only , 2nd class hard wood wrought bullnosed splayed chamfered or rounded on one edge or face secured with nails or brads area exc 6 but n exc 13 sqcm , 2nd class hardwood clean sawn battens at 35 cm centres area of each batten exc 15 and nexc 25 sqcm , 6mm thick 5 ply veneered decorative plywood grade 1 with bwr resin with decorative face veneerson one faces fixed with nails to timberframe work , vista wooden flooring vintage style 12 mm thick wooden floors ac5 rating or equivalent colour , vista wooden flooring vintage style 12 mm thick wooden floors ac5 rating or equivalent colour and pattern as aproved , cement opc 43 grade packed in hdpe bag each 50 kg wt , quick setting compound make acclerex rapidite , natural m sand free from moisture and organic matter confirming to is 383 1970 and is 2386 part vi , agg 20mm the size and grading of aggregate shall be as specified in is 456 200 rev , agg 40mm the size and grading of aggregate shall be as specified in is 456 200 rev , agg 63mm the size and grading of aggregate shall be as specified in is 456 200 rev , tmt bar 10mm , tmt bar 12mm , tmt bar 16mm , tmt bar 20mm , tmt bar 25mm , tmt bar 28mm , tmt bar 32mm , brickwork with subclass b bricks straight or curved on plan exc 6m mean radius built in cm 1 4 , supply and laying jointing and testing xlpe insulated pvc sheathed armoured heavy duty electric cable with stranded aluminium conductor 1100 volts grade , excavation in trenches in soft loose soil n exc 1 5 mtr wide and not exc 1 5 //bid details 3 / 112 m deep and getting out including forming bottom surface for laying of pipes complete all as specified and directed , returning filling in including spreading leveling watering and well ramming in layers not exc 25 mm thick complete all as specified and directed , removal of excavated material to a distance not exc 50 meter and depositing where directed at a level not exc 1 5 m above

State Government

CTN :42099229

06 Oct, 2025 2.18 Crore

Mandi - Himachal Pradesh

Tender For p/l built-up-spray grout, tack coat, bituminous concrete 25mm thick and thermoplastic strip const.of earthen shoulders, unlined surface drains, 600mm dia pipe, road marking in km 0/0 to 11/510 and five year routine maintenance in km 0/0 to 11/510

CTN :41381473

01 Oct, 2025 NA

Sangrur - Punjab

Tender For bid to ras laying of basketball court synthetic surface and allied accessories : : - concrete base , all weather acrylic synthetic surfacing eight layer ultra cushion , court line marking , led lighting installation , basketball court accessories complete with supply and fixing

State Government

CTN :42084119

06 Oct, 2025 9.68 Lacs

Parganas - West Bengal

Tender For construction of proposed concrete slab over existing surface high drain at new k.b roy garden at booth no.-173 of ward no.-29 under rajpur - sonarpur municipality.

Kitchen Repair Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors