Get complete information related to latest Klystrone Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Klystrone Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Klystrone Tenders.
Tender For corrigendum : supply of deluge system equipment for msb unit for nrep - a. deluge water spray systems (mvws system + water curtain system + hvws system)cs deluge valve with dry pilot trim & electric release trim, horizontal inlet & horizontal outlet, without skid, ul/fm approved, complete with dry pilot trim with test, alarm & drain devices, local deluge valve control station (dvlcs) (1 no. per dv), pressure transmitters (02 nos per dv.), 3/3 way sil2 certified intrinsically safe solenoid valve-24v dc (1 no. per dv), pressure gauges (03 nos. per dv), air filetr regulator (afr)(1 no. per dv), air vessel of adequate capacity (1 no. per dv), etc. in compliance with the scheme shown in attached "technical data sheets for fire fighting & safety equipment (tk-1p21a-sa-dat-0001)".the deluge valves shall be supplied with the trim and associated instruments duly assemblied with the deluge valve and with suitable packaging to avoid damage during transportation. the upstream strainer, block valves and by-pass valve including the pipes connecting to these items are not in bidders scope of supply.all items shall be suitable and certified for zone 1,iic,t3 area classification. all electrical and instruments shall be certified for intrinsically safe (ex-ia) and solenoid valve shall be certified to explosion proof (ex-d). all instruments and enclosures (junction boxes/ cabinets/panels/ accessories) in field shall be dust proof and weather proof with ip-67., 200 mm nb, 150 mm nb, 100 mm nb, 80 mm nb, mvw spray nozzle with 1/2" mnpt end connection, moc - stainless steel, ul / fm listed, (with inbuilt strainer): size 15 nb, mvw spray nozzle with 1/2" mnpt end connection, k factor-18, spray angle 120 , moc - stainless steel with corrosion resistant coating, ul listed., mvw spray nozzle with 1/2" mnpt end connection, k factor-18, spray angle 110 , moc - stainless steel with corrosion resistant coating, ul listed., mvw spray nozzle with 1/2" mnpt end connection, k factor-18, spray angle 90 , moc - stainless steel with corrosion resistant coating, ul listed., mvw spray nozzle with 1/2" mnpt end connection, k factor-22, spray angle 110 , moc - stainless steel with corrosion resistant coating, ul listed., mvw spray nozzle with 1/2" mnpt end connection, k factor-22, spray angle 90 , moc - stainless steel with corrosion resistant coating, ul listed., mvw spray nozzle with 1/2" mnpt end connection, k factor-26, spray angle 120 , moc - stainless steel with corrosion resistant coating, ul listed., mvw spray nozzle with 1/2" mnpt end connection, k factor-26, spray angle 90 , moc - stainless steel with corrosion resistant coating, ul listed., mvw spray nozzle with 1/2" mnpt end connection, k factor-30, spray angle 120 , moc - stainless steel with corrosion resistant coating, ul listed., mvw spray nozzle with 1/2" mnpt end connection, k factor-30, spray angle 110 , moc - stainless steel with corrosion resistant coating, ul listed., mvw spray nozzle with 1/2" mnpt end connection, k factor-30, spray angle 90 , moc - stainless steel with corrosion resistant coating, ul listed., mvw spray nozzle with 1/2" mnpt end connection, k factor-35, spray angle 110 , moc - stainless steel with corrosion resistant coating, ul listed., mvw spray nozzle with 1/2" mnpt end connection, k factor-35, spray angle 90 , moc - stainless steel with corrosion resistant coating, ul listed., mvw spray nozzle with 1/2" mnpt end connection, k factor-41, spray angle 90 , moc - stainless steel with corrosion resistant coating, ul listed., mvw spray nozzle with 1/2" mnpt end connection, k factor-51, spray angle 110 , moc - stainless steel with corrosion resistant coating, ul listed., mvw spray nozzle with 1/2" mnpt end connection, k factor-51, spray angle 90 , moc - stainless steel with corrosion resistant coating, ul listed., mvw spray nozzle with 1/2" mnpt end connection, k factor-79, spray angle 90 , moc - stainless steel with corrosion resistant coating, ul listed., quartzo
Tender For providing and installation /fixing of children play equipment at navkunj apartment in patparganj ac-57. - providing and fixing double arch swing of make kompan/ leo/koochie/hugo/arihant. the arch shaped side frame of the double arch swing is made up of 80 nb gi pipe and top pipe is made up of 50 nb gi pipe. the frame is powder coated to give an aesthetic look. seats-belt type seats made of synthetic rubberized material/fiber reinforced fabric materials of virgin reinforced material. the belt seat is suspended on 6 mm rubber coated gi chain. the ball bearings are mounted inside a specially designed nylon clamp. all complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, cc block 1:2:4 (1 cement:2 coarse sand :4 graded stone aggregate 20mm nominal size ) of required size as per department / manufacturers specifications and guidelines including maintenance cost for 1st year. for the laying of foundation of equipment cc work shall be paid separately., providing & fixing of animal mgr of make kompan/ leo/koochie/hugo/arihant.. bearing heavy duty ball bearing, capacity 4 child, center pipe 2 inch g.i. pipe, diameter 2.0 mtr. dia, handle2 5 mm od g.i pipe, outer frame 32mm od g.i pipe, size dia 2.0 mtr. , height-4 ft, usage/application outdoor playground. the center support of the is made up of 50 nb gi pipe. the pure polyester powder coating done on the pipes extends the life of equipment. all complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, c:c block 1:2:4 (1cement 2 coarse sand 4 graded stone aggregate 20mm nominal size) of required size as per department / manufacturers specifications. for the laying of foundation of equipment cc work shall be paid separately., providing and fixing of multi seater see saw of make kompan/ leo/koochie/hugo/arihant.. size (0.300 m 2.50 m product area) with plank fabricated from 76 mm od pipe and support stand from 58mm od galvanized-iron pipe, complete with roto molded seats and handles. the entire unit is securely anchored into a cement-concrete block foundation after deep excavation and earthwork, including all necessary fixing arrangements. the designated safe play zone measures 2.8 m 4 m, and the see-saw is designed for children aged 3 10 years, accommodating up to four friends riding simultaneously. all complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, c:c block 1:2:4 (1) cement :2 coarse sand:4 graded stone aggregate 20 mm nominal size) of required size as per department / manufacturers specifications. for the laying of foundation of equipment cc work shall be paid separately., providing & installing of a swing of make kompan/ leo/koochie/hugo/arihant.. size 3.10x 1.50mtr. main frame: - main cross bar made of round 76 o.d. pipe and legs made of 58 od pipe legs. t pipe will be required for the cross bar. all the pipes should be isi marked as per the is 1239/2004 ) & of reputed brand. ensuring the strength, durability, stability & pan long life to the kids. structure with safety as paramount. seats-belt type seats made of synthetic rubberized material/fiber reinforced fabric materials of virgin reinforced material & also duly with uv resistant colors, chain made of approx. 6mm thick gi chain with rubberized coating of with 3 mm minimum thickness, chrome plated supporting hook for belts hooks for convenience & height adjustment/ seat movement, self lubricated council type bush baring clamps provided with rubber coated chain to be hang the complete belt assembly. the complete structure double art swing should be powder coated with minimum powder coating thickness of 60-80 microns. accessories: nut bolts to be used all approved gi nut bolts
Tender For supply of set of interlock washers for axle end equipment of vande bharat train set wheel (ver 2.0). 1. interlock washer suitable for m10 hex socket head cap screw qty- 352 nos., 2. interlock washer suitable for m8 hex. socket head cap screw, qty-288 nos., 3. interlock washer suitable for m16 hex. bolt, qty.- 2560 nos ., note: 1) interlock washer shall be supplied as pairs glued together to fasten as such, 2) interlock washe r should be zinc flake coating (geomet321 or equivalent) with top coat, without any hexavalent chromium, without any integrated or separately added lubricant, minimum salt spray test life of 1000 hours shall be e nsured [ warranty period: 30 months after the date of delivery ]
Tender For supply of set of hardware items containing fasteners and interlock washers for axle end equipment as per icf drg no 89102007 ts/tc wheel item no 3,4,5,6 & 7: 1.iso 4017 m20 x 80 10.9 grade is 1364 part 2 qty-336 nos., 2. iso 4017 m16 x 50 10.9 grade is 1364 part 2 qty-440 nos., 3.iso 4017 m20 x 65 10.9 grad e is 1364 part 2 qty-336 nos., 4.iso 4017 m16 x 45 10.9 grade is 1364 part 2 qty-440 nos., 5.interlock was her suitable for m16 hex bolt qty-2240 nos. as per icf drg no 89102007 ts/tc wheel under note 3: faste ners to be zinc electroplated to grade a3l of annexure e of is 1367 part 11, note 4 :4.1 interlock washers s hall be coated or plated with environment friendly coating 4.2 interlock washers shall be offered as pair glu ed together to fasten as such 4.3 interlock washers shall be of make/type : disc lock, durlok & gallock or si milar [ warranty period: 30 months after the date of delivery ]
Tender For corrigendum : purchase of football equipment - purchase of football equipment, football 4 no.pu) poly uritheen material international match standard (fifa,aiff) approved, football 5 no.pu) poly uritheen material international match standard (fifa,aiff) approved, goal post 11 x 115 inches circumference made of iron with height 2.44 meter and width 7.32 meters with white powder coating paint & wheel mounted portable., goal post 9 x 93 inches circumference made of iron with height 2.1 meter width 4.8 meter with white powder coating paint & wheel mounted portable., goal post 7 x 73 inches circumference made of iron with height 1.6 meters & width 3.6 meter with white powder coating paint & wheel mounted portable., shotting board woodenas per standard specification
Tender For supplying items for the new integrated high court complex at bandra government colony, cts no. 629/1234/a, bandra (east), mumbai. - all concrete should be admixed with integral hydrophilic crystalline admixture (16bars) reputed makes like bulwark. taskmek, grace or equivalent for reducin permeability by more than 85% when tested as per din 1048 part 5 (after applying cycles of hydrostatic pressure), for self-healing of cracks up to a width of 0.40 mm, for reduced sulphate attack and for high early strength of concrete etc. this should meet the requirements specified in the recommended dosage rate of 1% complete as per manufacturers specifications to the entire satisfaction of engineer-in-charge. hydrophilic crystalline admixture shall also have a corrosion inhibitant property and shall be compatible with any other water reducing concrete chemical admixtures added to concrete for workability purpose. crystalline formation shall be mix of cylindrical & circular in shape to have maximum filling of pores the admixture used shall have manufacturers test reports and approval mandatorily both from iits and irc (indian road congress). approved makes: pidilite/ technonicol/ myk/ mapei, providing & applying 2 components, solvent free, liquid applied elastomeric seamless hybrid polyurea polyurethane membrane, using high pressure plural component spray equipment, to form a minimum system thickness of 1.5 mm in two or more passes with a total consumption of 1.5-1.6 kg / m2. the membrane shall have 100% solids, voc free, tensile strength > 15 mpa as per astm d 412, elongation > 450% as per astm d 412, low temperature crack bridging ability of 3.2mm as per astm c 1305, shore a hardness > 85 astm d 2240, puncture resistance > 1000 n as per astm e 154, water head resistance > 7 bar as per astm d 5385.the coating should pass dynamic crack bridging as per en 1062-7, method b for 20,000 cycles at -20 degree temperature. the membrane shall exhibit 25 years of service life tested and complied in accordance with en 13251:2016 durability certification. apply primer coat of epoxy primer by roller/ airless spray guideline and coverage @ 5-6 m2/ltr depends on porosity of concrete. allow to cure for max 5-6 hours. broadcast anti slip grains of 200-300 micron (dried sand) on wet primer at coverage of 0.8-1 kg/m2 and allow to come to touch dry condition before application of membrane. approved makes: pidilite/ technonicol/ myk/ mapei, supplying and installing 1.5 mm composite thick fully bonded weldable hdpe membrane conforming to is 16471:2017 requirements of ug waterproofing structures, requirements to provide type a fully bonded protection of ug waterproofing structures. the membrane shall exhibit 25 years of service life tested and complied in accordance with en 13251:2016 durability certification. the membrane should be minimum 2.4 m wide comprising of an hdpe layer and a pressure sensitive adhesive layer which is covered by a weatherproof protective layer with lap joint strength at overlaps >15000 n/m astm d 6392:2012. the membrane shall have minimum of 100 mm side and end laps which shall be thermos fused with leister machines at all the joints for assuring watertightness and achieving monolithic membrane. end laps and side laps should be a minimum of 100 mm with double weld system, comprising of two parallel welds of 15 mm wide each with a 20 mm air channel gap in between the two weld lines. the size of the membrane should not be less than 2.4 mtr. x 20 mtr. to minimize the joints. this membrane shall be continued over the vertical surface but terminated minimum 100mm below the top edge of the raft slab/footings and fixed as per recommendation. the hdpe membrane should have the below mentioned technical properties- 1) lap joint(side and end lap) strength at overlaps 15000 n/m astm d 1876 2) resist hydrostatic pressure of 70 m head of water as per astm d5385 3) puncture resistance of 1000 n as per astm e1544) peel adhesion to concrete of 150
Tender For corrigendum : supply of ht motors spares for emd-1,wtps,gsecl. - skf make induction heater model no. tih 100m / 230v for bearing fitting work., hydraulic jack with pump & accesories capacity: 100 mt., hydraulic jack with pump & accesories capacity: 50 mt., greasing pipe for ht motors - r1 type hydraulic hose pipe ( rubber hose with single inner wire braiding), araldite 180 gram/tube, red insulating varnish-class f epoxy insulation & protection coating., dr. back make backtol red in 1 lit. tin varnish, digital multimeter 4.1/2 digit (true rms), digital clamp on meter lcd display with backlight, 3-3/4 digit., digital megger (insulation tester) dual voltage 500/1000 v 0 to 2000 megaohms resolution of 1 m? weght: 500 gm approx., analog multi range insulation tester.hand driven type,voltage range-250v/500v/1000v., brass connectors for pstb of ht motor, plastic dori (sutari) for binding of plastic ,0.5 thick &2mm width., insulating cable gland for pstb of ht motor, grease gun, fevicol sr 998 (200 ml/tin), self fusing rubber tape black , class b , 31 kv die electric strength , size 2.5 cm x 10 mtr., pvc tap roll, insulating box for pstb for ht motor, ht pvc insulation tape size 0.18 mm x25 mm x 65 mtr length, 6.6 kv busbar /cable couductor protection heat shrinkable sleeve dia .before shrink:50 mmdia. after shrink :20 mm, heat shrinkable sleeve,size:45mm/18 mm( for 240/300 sq.mm )for 11 kv, 6.6 kv busbar /cable couductor protection heat shrinkable sleeve dia .before shrink: 75 mm dia. after shrink : 28 mm for 11 kv ht cable, z 801 fast steel epoxy stick (1 stick - 114 grm), impact wrench power/battery operated, cordless screw driver power/battery operated, w963 play safe high voltage tape (50 mm x 0.76 mm x 9.1 mtr) roll, w963 play safe high voltage tape (25 mm x 0.76 mm x 9.1 mtr) roll, becktol gray varnish in 1 ltr tin dr.back make, electical saftey equipment tester taparia product no:814 voltage range:110v to 230v
Tender For one panchayath one playground - development of ground in sathyan nagar estate ward in nemom lac, thiruvananthapuram - supply and installation of outdoor gym equipment - gym equipments (18% gst), od40855/2025-2026 : horse rider - supply and installation of horse rider having the following specifications: dimensions: (l x w x h) 1140 x 400 x 1400 mm. main frame - 114 mm od b class gi pipe. foundation plate m.s. round plate of 250 mm & 8 mm thick. foundation cover cap -dome shape of pp / nylon / hdpe material. remaining frame is made by 48 mm od b class gi pipe. seat frame is madeby 48 mm od b class gi pipe. seat position must be horizontal to 110 -120 degree. link - made up of 48 mm od b class g.i. pipe. angle between link and ground position is 10-20 degree. handle - 33 mm od b class gi pipe. paddle vertical support - 60 mm od b class gi pipe. handle frame- 42 mm od b class gi pipe dually bending design. foot pipe - 33 mm od b class gi pipe. support frame 10 mm thick ms flat is used. seat- dimension 320 x 270 x 100 mm blow moulded wall thickness 4mm material hdpe. bearing bush closing cap pp /nylon / hdpe material. foundation stool: made from main pipe 88 mm od m.s pipe and top support of m.s. round plate of 250 mm & 8 mm thickness is welded at top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing - use is 6005 permanent lubricated reputed brand. bearing bushes - 60mm od seamless pipe. pin made of 25 mm m.s. bright bar. grips - high quality rubber 46 mm od. circlips a 24 circlips are used for assembly. coating - best quality of powder coating 60 to 70 micron. safety instructions and exercise chart - start & finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing., od40856/2025-2026 : back extension - supply and installation of back extension having the following specifications: dimensions: (l x w x h) 1060 x 730 x 990 mm. main frame - made from 88 mm od b class g.i. pipe. foundation plate m.s. round plate of 250 mm & 8 mm thick. leg support - 42 mm od b g.i pipe. seat rest pipe 42 mm od b class g.i pipe. handle pipe 33 mm od b class g.i pipe. footrest - cast iron 124 x 296 x 5 mm thick and m.s plate of 3 mm thick used to support it. footrest pipe 42 mm od b class g.i pipe and 80 x 40 mm ms rectangular pipe. closing cap pp / nylon / hdpe material. seat 360 x 300 x 2 mm thick m.s. seat with corner fillet for safety. grips - high quality rubber 46 mm od. foundation stool: made from main pipe 88 mm od m.s pipe and top support of m.s. round plate of 250 mm & 8 mm thickness is welded top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. coating - best quality of powder coating 80-120 micron. safety instructions and exercise chart - start & finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing, od40857/2025-2026 : sky walker - supply and installation of sky walker having the following specifications: dimensions: (l x w x h) 1720 x 910 x 1700 mm. main frame - made of 88 mm od b class gi pipe dually bending design. foundation plate m.s. round plate of 250 mm & 8 mm thick. paddle vertical support - 42 mm od b class gi pipe. handle - 33 mm od b class gi pipe dually bending design. leg movement frame 50 mm x 50 mm x 2 mm thick square pipe. footrest - cast iron 124 x 296 x 5 mm thick and m.s. plate of 2 mm thick use for to support it. top closing cap dome shape made by pp / nylon / hdpe material. closing caps pp / nylon / hdpe material. foundation stool: made from main pipe 88 mm m.s pipe. and top support of m.s. round plate of 250 mm &a