Latest lab item Tenders | Government lab item Tenders

corporations/Associations/Others

CTN :45434436

26 Jun, 2026 NA

Delhi - Delhi

Tender For providing of selection of laboratories for testing of products/material - as per technical specification of laboratory items; as per technical specification of laboratory items; as per specification; na

Central Government/Public Sector

CTN :45431866

20 Jun, 2026 NA

Mehsana - Gujarat

Tender For supply of laboratory items /reagents

Central Government / Public Sector

CTN :45411806

08 Jun, 2026 64.09 Lacs

Chandrapur - Maharashtra

Tender For procurement of laboratory item opening date extension from 03 jun 26 to 08 jun 2026

CTN :45413730

09 Jun, 2026 NA

Tiruvallur - Tamil Nadu

Tender For supply of civil department lab apparatus - lab items, auger boring machine (motorised) engine type: 4-stroke, air-cooled, single-cylinder petrol engine displacement: 196 cc power output: minimum 6.5 7 hp ( 3.5 kw) maximum engine speed: ~3600 4000 rpm starting system: recoil (manual) start fuel type: pure petrol fuel tank capacity: minimum 1.5 1.6 l supported auger bit sizes: 4 , 6 , 8 , 10 , 12 , 14 (100 350 mm) bit material: heavy-duty mild steel with powder coating typical drilling depth: minimum 3.5 4 ft per bit (800 mm 1.2 m) bit coupling: quick-coupling system for easy bit replacements frame: robust tubular steel frame with ergonomic handles and vibration absorbers weight: minimum 20 22 kg (without auger bit) , flow table apparatus for concrete with accessories dimensions and specifications as per is 9103, table top made from flat metal plate, minimum thickness 1.5 mm. table top size: 700 mm 700 mm, with flatness tolerance of 1.5 mm. table top marked with: scribed cross at centre, lines parallel to table edges and central circle of 200 mm diameter underside of table top reinforced to prevent distortion. total mass of table top: 16 1 kg. table top, base frame front and upper stops provided as per is 9103. lower front edge fitted with two rigid stops to transfer load directly to base frame. base frame designed to transfer impact load directly to supporting surface, minimizing bounce. stop watch digital - 2 nos scale 1 mtr 2 nos mounting wooden platform 300 mm height amc for 3 years inclusive.

CTN :45417602

10 Jun, 2026 NA

Tiruvallur - Tamil Nadu

Tender For supply of lab items for eee and mechanical - eee and mechanical lab items, single phase transformer rating: 1 kva, 50 hz input: 230 v ac output: 115 v ac type: air-cooled, single-phase step-down transformer properly insulated input and output terminals brought out for safe operation, three phase transformer type: three phase transformer rating: 3 kva input voltage: 415 v ac, 3-phase output voltage: 230 v ac, 3-phase frequency: 50 hz winding material: copper wound insulation class: class b or higher duty: continuous duty suitable for laboratory use bench/floormounted suitable for laboratory operation. all winding terminals shall be brought out to insulated terminals and enclosed within a protective outer cover for safe laboratory operation , on / off control of lamp using solid state relay kit type : solid state relay (ssr) trainer kit control/input voltage : 12 v / 24 v dc or up to 30 v dc output load voltage : 230 v ac, single phase load control : on/off control of ac lamp load solid state relay based switching circuit opto-isolated input control built-in ac lamp load manual on/off switching arrangement led indication for input and output status , mcb elcb trainer kit 1 phase/3 phase, 2/3/4 pole, 3a-16a single pole mcb 2-5amps two pole elcb 30ma lamp load single phase 5amps panel enclosure and terminal outlets , single phase induction motor kit for load test by speed control of vfd (variable frequency drive) 2 hp single phase 230v complete load test experimental setup(with brake drum/pulley) induction motor -1 no work bench setup with digital meter -1 no motor stand with ant vibration bush 1 set loading arrangement with spring balance non-vibrating brake arrangement with stand and electrical work bench , 3 phase induction motor kit three phase squirrel cage induction motor with rope brake arrangement non-vibrating brake arrangement with stand and electrical work bench three phase squirrel cage induction motor 5 hp, 440 v, 1440 rpm, foot mounted type, frame size 132 mm, core length 110 mm, mechanical rope loading set up with 1" screw rods 2 nos, 6" adjustable wheels 6" 2 nos, back support frame, 9" aluminium drum, 0 50 kg spring balances 2 nos , dc shunt motor kit for load test dc shunt motor rope brake arrangement non-vibrating brake arrangement with stand and electrical work bench d.c. shunt motor 5hp, 220v, 1500 rpm, foot mounted type, frame size 132 mm, core length 110 mm, field current 0.5a, armature current 11a, 4 pole with inter poles, mechanical rope loading set up with 1" screw rods 2 nos, 6" adjusting wheels 6" 2 nos, back support frame 9" aluminum drum, 0 50 kg spring balances 2 nos. , bldc motor kit with electrical work bench *36v 400w bldc pro motor 1 no inbuilt volt and ammeter and rpm meter inbuilt power supply input 230v ac

CTN :45417603

09 Jun, 2026 NA

Tiruvallur - Tamil Nadu

Tender For supply of mechanical department lab items - mechanical department lab items, 3d printing machine build volume(wxdxh) 256 x 256 x 256 mm shell enclosed (plastic & glass) hot end all-metal nozzle 0.4 mm stainless steel included max hot end temperature 300 nozzle diameter 0.4 mm (included) 0.2 mm, 0.6 mm, 0.8 mm build plate compatibility textured pei plate, cool plate, engineering plate, high temperature plate max build plate temperature 100 max speed of tool head 500 mm/s max acceleration of tool head 20 m/s supported filament pla, petg, tpu, pva, pet, abs, asa chamber monitoring camera low rate camera 1280 x 720/0.5fps time lapse supported filament run out sensor :yes control board fan closed loop control auxiliary part cooling fan closed loop control air filter activated carbon filter

CTN :45346458

10 Jun, 2026 NA

Vellore - Tamil Nadu

Tender For corrigendum : supply of i year physics, chemistry lab items dept use - digital balanceweight 500g, accuracy 0.01g, top pan. tare function,caliberation- automatic external display type: led, digital tds meter range 0-9990 ppm, resolution 1ppm, digital lcd display, atc feature., heating mantlecapacity: 500ml rating 200w with energy regulator, joule calorimetercopper vessel, battery eliminator-3a, (2,4,6,8,10,12 v), tubular rheostat 20-3.3a, one way plug key, analog type dc ammeter (0-2a), voltmeter (0-5v), thermometer (alcohol), stop clock, hotplateplate size:25 x 30 cm (10 x 12 inch) with adjustable thermostate controlup to 350 degree temprature controlheating element: nichrome heating elementpower supply: 220 240 v ac, 50 hz, electric bunsen burnermaximum temperature up to 800 degree c, power supply 220 to 240 v, power 350 w, water distillation unitoutput capacity: 2 4 liters per hourmaterial: stainless steel boiler and condenserheater: built-in electric heating elementpower supply: 220 240 v ac, 50 hzcooling: water-cooled condensersafety: automatic low water cut-off, ohms law verification kitbattery eliminator-3a, (2,4,6,8,10,12 v), tubular rheostat 20-3.3a, one way plug key, analog type dc ammeter (0-2a), voltmeter (0-5v), standard resistance coil of 1, 2 ohm (2-set) wound on a wooden bobbin, boyles law apparatusthe apparatus includes the quill tube, a retort stand, a clamp, and a mounted meter scale.quill tube specifications:length: approximately 50 cm.bore diameter: uniform bore, roughly 1 mm to 2 mm.construction: glass tube with one end sealed.trapped substance: a mercury pellet (or thread) of length 10 to 15 cm is introduced to enclose a column of air. mounting: attached to a half-meter or meter scale., helical spring apparatusstructure: a rigid support mounted on a heavy metal base, typically cast iron, to ensure stability during tests.springs: high-tensile steel spiral springs, typically (approx 25 mm) diameter, (100 mm) long.measurement scale: a vertical steel meter scale, usually with (1mm) graduations, for precise deflection measurement. loading mechanism: a, typically (50g), hook-attached weight hanger at the bottom. pointer: a fine pointer attached to the bottom of the spring moves along the scale.accessories: includes a set of slotted weights (e.g., (6times 50g) or similar sets) for incremental loading.

CTN :45384493

06 Jun, 2026 NA

Vellore - Tamil Nadu

Tender For supply of dmt lab items dept use - robotic arm controller with software supportdegrees of freedom: 6 dof payload: minimum 250 g at full reach reach: minimum 350 mm repeatability: 0.2 mm or better controller: industrial-grade controller (arm cortex-m4 or higher / equivalent architecture) programming: supports guibased and programming (python / c++ / equivalent) vision system: integrated camera with ai-based object detection capability communication: usb and serial communicationsoftware: licensed software compatible with windows os end effectors: minimum 3 (gripper, suction cup, pen holder) safety: emergency stop, limit protection power supply: 100 240 v ac, 50 60 hz, optical digital microscopemagnification: 40x to 400x digital camera: minimum 5 mp resolution display: pc/monitor via usb/hdmi or built-in display illumination: adjustable led illumination focus: coarse and fine focusing mechanism optics: coated lenses with wide field view stage: mechanical stage with slide holder software: image capture, measurement, and analysis software included connectivity: usb / hdmi /ethernetpower supply: 110 240 v ac, 50 hz, digital height gage with driving wheel (300)measuring range: 0 300 mm resolution: 0.01 mm accuracy: 0.03 mm construction: hardened stainless steel column base: ground and lapped base suitable for surface plate measuring tip: carbide tipped scriber movement: smooth slider with fine adjustment wheel display: digital lcd power: battery operated, portable surface roughness testerparameters: ra, rz, rq, rt measuring range: ra: 0.005 16 m rz: 0.02 200 m resolution: 0.01 m accuracy: 5% or better stylus: diamond tip ( 5 m radius) cut-off lengths: 0.25 mm, 0.8 mm, 2.5 mm display: digital lcd output: usb interface for pc connection standards: iso 4287 / din / ansi compliant power: rechargeable battery, ultrasonic flaw detectortest range: 2.5 mm to 10 meter in steel velocity range: 1000 15000 m/s gain: minimum 100 db with calibrated steps frequency range: 0.5 15 mhz display: a-scan display (lcd) modes: pulse echo and transmit/receive linearity: vertical: 3% horizontal: 0.5% probes: minimum 2 (straight and angle) connectors: standard (size 00 or equivalent) power: rechargeable battery + ac supply

CTN :45384495

06 Jun, 2026 NA

Vellore - Tamil Nadu

Tender For mech dept lab items dept use - 3d printing machine build volume(wxdxh) 256 x 256 x 256 mm shell enclosed (plastic & glass) hot end all-metal nozzle 0.4 mm stainless steel included max hot end temperature 300 nozzle diameter 0.4 mm (included) 0.2 mm, 0.6 mm, 0.8 mm build plate compatibility textured pei plate, cool plate, engineering plate, high temperature plate max build plate temperature 100 max speed of tool head 500 mm/s max acceleration of tool head 20 m/s supported filament pla, petg, tpu, pva, pet, abs, asa chamber monitoring camera low rate camera 1280 x 720/0.5fps no 90000 timelapse supported filament run out sensor :yes control board fan closed loop control auxiliary part cooling fan closed loop control air filter activated carbon filter

CTN :45386616

06 Jun, 2026 NA

Vellore - Tamil Nadu

Tender For supply of civil dept lab items - auger boring machine (motorised) engine type: 4-stroke, air-cooled, single-cylinder petrol engine displacement: 196 cc power output: minimum 6.5 7 hp ( 3.5 kw) maximum engine speed: ~3600 4000 rpm starting system: recoil (manual) start fuel type: pure petrol fuel tank capacity: minimum 1.5 1.6 l supported auger bit sizes: 4 , 6 , 8 , 10 , 12 , 14 (100 350 mm) bit material: heavy-duty mild steel with powder coating typical drilling depth: minimum 3.5 4 ft per bit (800 mm 1.2 m) bit coupling: quick-coupling system for easy bit replacements frame: robust tubular steel frame with ergonomic handles and vibration absorbers weight: minimum 20 22 kg (without auger bit)

Lab Item Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government/Public Sector

Central Government / Public Sector