Latest laboratory glass ware Tenders | Government laboratory glass ware Tenders

Central Government/Public Sector

CTN :45486641

26 Jun, 2026 NA

Mumbai - Maharashtra

Tender For m.s.plate structural quality 5mm thickness x std width x std length to specification no.is:2062/2011, e 250 gr a. material test certificate required from nabl accredited lab along with manufacturer's test certificate. party to submit oem / autherization with warranty. sample to be get approved before bulk supply(shop no.03) [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45197749

16 Jun, 2026 NA

Koraput - Odisha

Tender For corrigendum : tender for supply of tools from hal provided technology - secondary master reference - pt 2 d , secondary master impeller stage-1 , laby.root measure tool , inspection tool , inspection tool , inspection tool , high frequency pin + equipment , handling box , tightening pedastal , pin , dn12 pipe , multi purpose flange blank , exp extractor , support connectors , blanking plate , immobilizer , blanking cover , flat seal , test fixture , assembly tool , raising device , support of assembly , support , tool circlip fitting , errection support , removal tool , handling tool , immobilizer pin , adaptation link , assembly fitting , balancing tool , milling fixture , rectification tool , flow check tool , fr plr assy tool , base casting , sleeve fitting tool , marking block , inspection fixture , errection tool , seal assembly cone , rotating plate , hydraulic pressure generating tool , variseal setting , measuring tool , measuring tool , measuring tool , assembly spacer , extractor , seal setting tool , test adaptation , test tool (for tm0073g001) , support tool (for tm0073g001) , special tightening tip , checking tool , control tool , control tool , ring removal/installation , assembly tap cylinder , test interference , grinding fixture for pt1 blade , grinding fixture pt stg 2 , plate cutting tool , handling tool , segment clue tool , handling tool , set of guides , det 2 of tm2689 g101 , lifting tool , engine support mount , setting & removal tool , balancing tool , blank , withdrawal tool , rear bearing seal removal tool , errection support , errection support , orientation tool , adaptation without target , adaptation with target , sheath , sheath , protector , removal tool , assembly support , fuel leak drain check tool , wrench & immobilizer , erection support , handling tool , adaptor fitting , adaptor fitting , wedge height , extractor , air intake cover , shuttle box , key , flow check tool , erosion / impact check tool , erosion / impact check tool , graduating rule , boroscope positioning support kit

State Government

CTN :45505911

25 Jun, 2026 NA

Bhopal - Madhya Pradesh

Tender For supply of exhibit packing bag 10kg , exhibit packing bag 15kg , forensic exhibit packing enveloped lxw 21x29 7 cm or a4 size , forensic exhibit packing enveloped lxw 420x29 7 cm or a3 size , forensic exhibit packing enveloped lxw 216x35 6 cm or legal size , forensic exhibit packing enveloped lxw 11x5 cm or equivalent , printed selfsealing cloth for exhibit packing bag 5x11 inch , printed selfsealing cloth exhibit packing bag 10x12 inch , packing tape as for user requirement 0 5inches transparent , packing tape as for user requirement 1inches transparent , packing tape as for user requirement 2inches transparent , packing tape as for user requirement 0 5inches broun , packing tape as for user requirement 1inches broun , packing tape as for user requirement 2inches broun , glass cleaner collin 500ml or higher , handwash 200ml , handwash 175ml , sanitizer 200ml , tissue two plies 200pulls per pack , tissue one plies 50pulls per pack , high quality tissue box , mask , gloves size m , surgical blade 20 no , surgical blade 22 no , scissor plastic thickness 1 7mm , zipper pouch , cotton roll , sand paper , exhibit tray , apron , garbage bin with lid , high density plastic container 20ltr , high density plastic container 10ltr , measuring tape , plastic wash bottle 1ltr , mug , all out with refill , test tube brash , bottle washing brush , anti blue light and anti galve screen guard , dropper 6 inch , aluminum foil paper , air gas cylinder refiling , nitrogen gas cylinder refiling , argon gas cylinder , helium gas cylinder , hydrogen gas cylinder , esd slippers 10 number , esd slippers 7number , sens room freshener ocean mist spray , 20ml vial , 2ml vial , water jug , water glass , water battle hdpe high density polyethylene , water cattle , thermosteel water bottle , tea cup , tea tray , domestic plate bone china , disposable white plate , water glass disposable , bisleri 250ml water bottle pack of 24 , bisleri 500ml water bottle pack of 24 , coil heater , heatingcoil 1500 watts , cotton hand white towel , towel big , cleaning duster , computer cleaning clothes , latta clothes , basta clothes , door mat 45cm x 75 cm , door mat 60cm x 90 cm , lock medium , nescafe coffee , 2 in 1 telephone , landline phone , led bulb 5 volt , led bulb 9 volt , led bulb 15 volt , tube light 20 watts , pipe 1 inch , hdmi adopter , 3 pin tops , 2 core multi standard wired , mcb 16 ampere , mcb 20 ampere , mcb 4 way , fan regulator , surface ceiling light , power cable , floor cleaner phenol , toilet cleaner liquid harpic , detergent powder surf 1kg or higher , scrub pad polyester , toilet cleaner brush , finish surface mounted door closer , table top , first aid box , soft bristle swiping gross broom normal jadoo , drain pipe multipurpose water drain pipe , axe , pick axe genti , garden rake datal as for user requirement , khurpi as for user requirement , aluminium ladder , water tabe , celling fan , wall fan , exhaust fan , cpvc plumbing pipe 2 inches , pen for conference training seminar , genuine artificial leather conference , synthetic leather bag , file folder , diary spiral , high tea , tea , hardbound diary , veg lunch packet , veg buffet lunch , mementos small , mementos large , plants medium , printed certificate , certificate folder , flowers bouquet photo copy paper 80 gsm a4 size, photo copy paper bond paper a4 100gsm, photo copy paper a3 size 80gsm, photo copy paper 80gsm legal size, tags less for files length 175mm, tags for files length 125mm, desktop calculator lcd led, file folder clear bag folder legal size, highlighter pen multicolour , stapler 24 6, stapler 10 4 , stapler 23 24, marker slim, marker slim, marker slim, gel pen blue uniball, //bid details 2 / 140

CTN :45404122

19 Jun, 2026 NA

Palacode - Tamil Nadu

Tender For corrigendum : supply of equipment for mechanical engineering department - supply of equipment for mechanical engineering department, lathe machine :specification :bed: 2v & 2 flat, induction hardened and ground minimum bed length: 1375 mm bed width: 240 mm capacity: height of centre: 165 mm swing over bed: 320 mm swing over gap: 510 mm swing over cross slide: 180 mm distance between centres: 650 mm slides: cross slide travel: 200 mm compound slide travel: 115 mm spindle: spindle bore: 40 mm spindle nose: thread type, 62 mm spindle taper: mt-3 tail stock: quill diameter: 38.1 mm taper: mt-3 travel: 120 mm speed: no. of speeds: minimum 8 range: (40 800 )rpm threading: metric: (1 6 )mm (min 13 steps) english: (2 24 )tpi (min 19 steps) lead screw: (1 4) tpi electrical: motor: 1.5 hp, 230v/415v, 50 hz drive: v-belt structure: bed: close-grained cast iron (fg 260) gears: hardened steel base: rigid cast iron stand , open cup apparatus :specification :standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 6 c per minute (as per standard) temperature range: -6 to 400 c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valvebody: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hz safety: overheat protection heat insulation , closed cup apparatus :specification :standard compliance: astm d93 / is 1448 (part 21) test cup:brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustable ignition: pilot flame with automatic shutter mechanism temperature measurement: thermometer or digital sensor(ip-28c or astm) display: digital temperature display power supply: 230v ac, 50 hz safety:over-temperature cut-off flame safety control , tail stock assembly :specification :medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, slip gauge :specification :set size: m87 (87 pieces) or equivalent range: 1.001 mm to 100 mm step sizes: 0.001 mm 0.005 mm 0.01 mm material: high-grade alloy steel / tungsten carbide (preferred) hardness: hrc 63 65 accuracy: grade: grade 1 or grade 2 flatne flatness / parallelism: 0.5 m stored in protective wooden boxes to prevent wear; calibration grades include charts for exact sizes , dc motor:specification :type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steel calibration grades include charts for exact sizes supply: mounted on training base suitable for dismantling and inspection , hydraulic operated directional control valves (dcv):specification :type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study , bearing with shaft assembly :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply:mounted on training base suitable for dismantling and inspection , coupling unit using

CTN :45476978

22 Jun, 2026 NA

Uthangarai - Tamil Nadu

Tender For supply of civil lab equipments - list of equipments, slump cone apparatus 300mm ht, bottom dia 200mm,top dia 100mm with base plate and tamping rod material. for specifications refer nit, sieve for fine aggregate-complete set type: is standard test sieves for fine aggregate material: brass frame with woven wire mesh diameter:200mm height : as per is specification aperture sizes (completeset)4.75mm,2.36mm,1.18mm,600 m,300 m, 150 m,pan & lid standards :is 2386(part i) /is 460 finish: smooth, corrosion-resistant accessories:lid and bottom pan included . for specifications refer nit

CTN :45098812

11 Jun, 2026 2.65 Lacs

East Khasi Hills - Meghalaya

Tender For bid to ras supply of mobilization charges of tools and plants alongwith accessories , standard penetration test for bore hole no 1 , standard penetration test for bore hole no 2 , standard penetration test for bore hole no 3 , plate load test

CTN :45475184

22 Jun, 2026 NA

Hyderabad-T - Telangana

Tender For item description: m3 test canister raw material - ss 316l plate (10mmx1250x2500), ss 316l plate (16mmx500xl000), ss 316l plate (20mmx1250x2500), ss 316l plate (25mmx500x1000), ss 316l plate (50mmx500x1000), ss 316l plate (120mmx500x1000), ss 316l plate ring (od 720xid 650xthick 80), ss 316l plate ring (od 720xid 650xthick100), ss 316l pipe (od 12xid 8xl 1000), ss 316l rod (od 50xl 10000), pure aluminium plate/ bar (l60xw30xthk30)

Central Government/Public Sector

CTN :45472795

26 Jun, 2026 NA

Mumbai - Maharashtra

Tender For m.s.plate ( sheet ) 20mm thick, size of plate shall be 2500 x 1250 x 20mm , grade 'a', is 2062 / 1999 .material test certificate required from nabl accredited lab.along with manufacturer's test certificate. party to submit oem/authorization with warranty. sample to be get approved before bulk supply.(shopno.03) [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45479556

19 Jun, 2026 NA

Kota - Rajasthan

Tender For tapered stationary plate for mk-50 draft gear (item to be supplied with work test certificate) drg.no.besco fig 20; item no.4 or equal". specification as per rdso str no. 49-bd-08. warranty period : 30 month from the date of supply [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variationpermitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45475154

30 Jun, 2026 30.00 Lacs

Gwalior - Madhya Pradesh

Tender For repair / replacement and maint of lt external electric supply works and other connected items at east & west wing in tech area under ge (af) tech area gwalior - s&f in repair mccb, 4 pole, 630 amps current rating and ultimate breaking capacity ics=icu =100% 36 ka with adjustable overload setting and having thermal magnetic release and to be fixed in distribution board, complete all as specified and directed., all as per item here-in-before but mccb, 4 pole, 400 amps current rating and ultimate breaking capacity 36 ka. ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 315 amps current rating and ultimate breaking capacity 36 ka. ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 250 amps current rating and ultimate breaking capacity 36 ka. ics = 100% of icu, all as per item here-in-before but mccb, 4 pole, 160 amps current rating and ultimate breaking capacity 36 ka . ics = 100 % of icu, all as per item hereinafter but mccb, 4 pole, 125 amps current rating and ultimate breaking capacity .16 ka . ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 100 amps current rating and ultimate breaking capacity. 16 ka. ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 63 amps current rating and ultimate breaking capacity .16 ka . ics = 100 % of icu, m&l for earthing complete with galvanised steel plate electrode 600x600x6mm thick buried directly in ground (top edge of the plate should not be less than 1.50mtrs below ground level) connected to gi strip 25 4mm by means of bolts, nuts check nuts and washers of galvanised iron or steel connected to earthing test point all as specified incl 20 mm gi tubing medium grade and necessary fitting for protection of gi strip incl laying of charcoal dust and common salt in alternate layers of 150mm th, pcc chamber using pcc(1:3:6) type c-1 using 20mm graded stone aggregate, rcc cover 40mm thick (1:2:4) type b-0 using 12.5mm graded stone aggregate reinforced with 6mm dia round bar @ 75mm c/c both ways with ms handle 8mm dia, plastering 15mm thick cm (1:6) externally up to 150mm below ground level, gi funnel with 20mm dia medium grade gi pipe for watering and wire mesh incl excavation and earth work and disposal of surplus soil complete all as specified and shown on electrical plate no.3 of ssr part-i (2009) and connected to earth test point incl testing and marking bldg nos and writing test results (in white) on a black painted m.s. plate (size 300x300x3mm th) duly welded with angle iron of size 40x40x5mm, 60cm long, fixed with the earth pit chamber by grouting complete all as specified and directed.note :- (i) gi strip 25 4mm and gi pipe medium grade, up to 7.5mtr shall be deemed to be included in the rates quoted for earthing.(ii) excavation and earth work in any type of soil strata shall be deemed to be included in rates quoted for earthing. (iii) the rates quoted by the contractor are deemed to be included for pcc chamber and pcc cover as per ssr part-1.-, m&l for preparation of old painted surfaces of lt steel tubular pole/strut, of any description and in any position 9.00/8.50 mtr height and scrapping of pole with emery paper and applying one coat of aluminium paint on all the metallic surfaces including protection pipe, cross arms, clamps, gi pipe bracket of street/security light, anti climbing devices etc and providing three nos radium band strips complete all as specified and directed., supplying ,laying, jointing and testing xlpe insulated, armoured, heavy duty, aluminum conductor cable 1100 volts grade ,laid in trenches/ducts, floors, fixed to walls etc. complete all as specified and directed for the following sizes.note: the cost of taking down of lt ug cable is deemed to be included in the quoted rate, 35 sqmm 3 core, 50 sqmm 3 core, 70 sqmm 3 core, 185 sqmm 3 core, 240 sqmm 3 core, excavation in trenches n exc 1.5 mtr wide and n exc 1.5 mtr depth for foundation and laying of cable and getting out in an

Laboratory Glass Ware Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector