Latest laminates sheet Tenders | Government laminates sheet Tenders

State Government

CTN :39718596

07 Apr, 2025 NA

Udyogamandal - Kerala

Tender For corrigendum : supply of fep/pfa with frp (vinyl ester structure) dual laminate-reactor bottom header for sodium chlorate plant

State Government

CTN :39787014

01 Apr, 2025 34.27 Lacs

Jaipur - Rajasthan

Tender For budget announcement 2023-24 57(1) (f) institute of dermatology for centre of excellence in charak bhawan at sms hospital, jaipur civil work (234.00 lacs) at p.w.d. sub dn.-sms hospital-ii, jaipur. (supply of furniture) - conference table: supply of conference table size 7680x3050x750mm made of white oak wood, oak veneer and ss 304 frame. top thickness 30mm made of bwp plywood with white oak veneer pasting on both sides and edges covered with 30x23mm thick white oak wood with miter joints, modesty panel inner and outer shall be made of 18mm thick bwp plywood with white oak veneer pasting. the legs (08 nos.) shall be made of ss 304 grade with pvd coating. table top shall be supported with 02 nos. 40x25mm ms hollow pipe black powder coated which are connected to ss legs. all wood surfaces shall be polished with water based nontoxic pu polish. electrical pop-up box/cable cubby (16 nos.) with built in sockets as per requirement along with wire management system shall be provided. wood should be of superior quality kiln dried white oak having moisture content not more than 10% and processed with anti-termite treatment in a pressurized chamber to be used. plywood /veneer should be of approved make greenply, century ply, duro or equivalent. laminate should be of approved make greenply, century ply or equivalent. polish of all wood surface shall be finished in approved shade with 03 coats of water based polish in satin finish with prior sanding, sealing with fillers and water based sealer. all complete as per drawing and approved by engineer in-charge., high back chair cushioned : supply of high back chair size 650x580x1200 mm with cushioned seat and back rest. the seating height of the chair ranges from 425mm to 545mm from floor. the seat and back are made up single piece l-plywood and upholstered with leatherette and molded polyurethane foam of density 40 kg/m3. the cushioned armrests are injection molded from polypropylene. the mechanism is designed with features such as knee tilt, 360 degree revolving type, upright position locking back, seat / back tilt adjustment. the chair shall have pneumatic height adjustment of 100mm & class 3 gas lift. ss finish base fitted with 05 nos. of twin wheel castors which are injection molded in black nylon. foam of approved brand sleep well, feather foam, kurlon or equivalent. all complete as per approved by engineer in-charge, chair :supply of chair size 500x500x900mm. the seat and back is made up of 12mm thick hot pressed plywood and upholstered with leatherette and polyurethane foam of density 40 kg/m3. the one piece armrests are injection molded from black polypropylene. the frame is made of dia 19mm x 2mm thick m.s. tube with ss finish. foam of approved brand sleep well, feather foam, kurlon or equivalent. all complete as per approved by engineer in-charge, storage cabinet : supply of storage cabinet size 900x450x750mm made of white oak wood & oak veneer. the cabinet frame section 35x23mm & legs section 33x33 shall be made of solid white oak wood. side panels / shutters / drawers made of 18mm thick bwp plywood with white oak veneer pasting. stone top 20mm thick shall be provided which is pasted on 18mm thick bwp plywood. all wood surfaces shall be polished with water based nontoxic pu polish. good quality telescopic channel/hinges/locks etc. shall be provided. wood should be of superior quality kiln dried white oak having moisture content not more than 10% and processed with anti-termite treatment in a pressurized chamber to be used. plywood /veneer should be of approved make greenply, century ply, duro or equivalent. laminate should be of approved make greenply, century ply or equivalent. polish of all wood surface shall be finished in approved shade with 03 coats of water based polish in satin finish with prior sanding, sealing with fillers and water based sealer. all complete as per drawing and approved by engineer in-charge., computer table : supply of computer table size 1200x

State Government

CTN :39827512

04 Apr, 2025 NA

Delhi - Delhi

Tender For providing and installation of furniture and miscellaneous related works in east study centre, tahirpur, sol, university of delhi - ws3 - workstation with front divider between tables - 900x550 x 750mm table - 25mm thick pre -laminated particle board of approved shade. the working and non working edges shallbe finished with machine pressed pvc edge banding. the table top shall be supported with ms powder coated "c" shaped leg (50 mm x 50mm thickness) with connectors. provision of wire tray for wire raceway passingwith ends legs cover 18mm thick plpb. laminate shades to be approved by client before execution, ws 6 - workstation table for director/ dy.director/ principal - similar to exisiting at sol north 2400x900x750 , including side credenza and back credenza main table - 2400x900x750supplying desk with main table of size 2400mm x 900 x 750mm(h) and drawer box consisting three drawers lockable. the worktops shall be made of superior quality 25mm thick ply board of grade ii, type ii confirming to is: 12823 of approved shade. the top and side panels will be claded with s laminate of thickness 1mm, one no. of modesty panel and sides shall be provided made of 18-25mm thick laminated ply board of, confirming to is: 12823 of length as per design. wire managers and computer tray shall be provided on table top with 55-60mm dia to hold wires. all exposed edges of table shall have 2mm thick hot melt pvc banding.side credenza - 1200x450x600mmside rack 1200 x 450 x 600mm (h) (ply board)supplying of top shall be made of superior quality 25mm thick particle board of grade ii, type ii confirming to is: 12823 of approved shade. the top and side panels will be claded with laminate of thickness 1mm and 18mm thick and back closed with 9mm thick pre laminated plyboard and with sliding or openable door lockable including lockable drawers and as required nos of shelves shall be provided made of 18mm thick laminated particle board of grade ii, type ii, confirming to is: 12823 of length as per design. all exposed edges of table shall have 2mm thick hot melt pvc banding.back credenza - 2400x450x600mmsupplying of swing door storage unit- the carcass is made out of 18mm thick plyboard top, sides, door, shelves and 12mm thick ply board with both side laminate. the doors are made up of 18mm thick plyboard with prelaminate with hinges, handles & locks . the storage unit is provided with levellors for height adjustment with the help of levellors .laminate shade as per selection, storage- 900x450x850mm supplying and placing in position of wooden storages of size 900mm(w) x 450mm(d) x 850mm(h) metalstorage consisting of swing door, side panels, top panel, back & shelves including base/skirting. the storage is made up of 25mm thick and 18mm thick pre-laminated particle board with 0.8mm thick crca sheet (as per is:513)cladding on both sides and top is made up of 11mm thick bent metal tops made up of 0.8mm thick crca sheets (as per is:513). metal cladding and top are powder coated with epoxy polyester powder of 50 +/- 10 microns thickness. the storage unit is provided with 2 hinge doors made up of 18mm thick pre-laminated particle board with decorative laminate on front side and backing laminate on backside. opening door of the storage to have aesthetically appealing recess handle of aluminium extrusion. the storage unit is provided with two nos of adjustable shelves to be supported adequately by specified hardware. uniformly distributed load carrying capacity of each shelf shall be 40kg. metal storage to be with 3 point central locking arrangement. each storage unit shall be provided with a metal skirting of 15omm(h) along the width of the unit made up of 0.8mm the skirting is powder coated with epoxy polyester powder of 50 +/- 10 microns thickness. storage unit to be provided with 4nos screw type adjustable leveler with plastic base with 10mm adjustment. laminate shades to be approved by client before execution, centre table- 1000x1000x425mm providing

Central Government/Public Sector

CTN :39837989

07 Apr, 2025 NA

Erode - Tamil Nadu

Tender For supply of lead supporter for hitachi tm consisting of 06 items to hitachi drg. no. 10s-813-538 alteration-k, one set consists of 2 nos each of drg. item 1,2,3,5 6 and 4 nos of drg. item no.4 with material glass mat epoxy laminate (fire retardant) as per is: 10192 grade ep 2 in addition to is: 3513 part-i, type-vi

CTN :39824452

07 Apr, 2025 8.00 Lacs

Jhunjhunu - Rajasthan

Tender For stationery goods supply work rate contract year 2025-26 - 1. photo stat ream photo stat ream a-4, 500 sheets a photo stat ream - fs 500 sheets legal a photo stat ream a-3 500 sheets a carbon packet single 100 carbons per packet a white paper ream 16x26 oriental 500 sheets a glue bottle 700 m.l. glue stick 25 gm pencil packet a glue stick 50 gm pencil packet alpin packet brand 400 gm per packet file pad cloth strip file cover laminate baya company with lace size 14x9.5 a cardboard file cover high quality cloth binding with lace size 14x9.5 a stamp pad blue ink 160x97mm a stamp pad blue ink 110x69mm a slip pad 50 pages slip pad 100 1. ball point pen medium quality 0.5 point, ball point pen high quality 0.5 point, gel pen medium quality 0.5 point, gel pen high quality 0.5 point, file with cloth strip, file with postage pad, vehicle log book 80 pages, vehicle log book 160 pages, vehicle log book 240 pages, letter dispatch register 160 pages, pages in red permanent, letter dispatch register 320 pages, pages in red permanent, letter receipt register 160 pages, pages in red permanent, letter receipt register 320 pages, pages in red permanent, envelope 9x4 size, envelope 10x12 size, envelope 10x16 size ka envelope 5x11 size ka attendance register for one year daily dual signature 33 name a attendance register for one year daily dual signature 66 name a attendance register for one year daily dual signature 88 name a stapler small size stapler small size stapler pin big general book 200 pages marked in red ink general-1, see paragraph 4.1 a income-expenditure combined should be considered as one page. size 19x14 post a general book 300 pages marked in red ink general-1, see paragraph 4.1 a income-expenditure combined should be considered as one page. size 19x14 word b a marker pen cd marker a marker pen room top a stock register permanent stock book 200 pages permanent stock register authorised for municipal councils a stock register permanent stock book 400 pages permanent stock register authorised for municipal councils a stock register temporary stock book 200 pages marked in red ink a stock register temporary stock book 400 pages marked in red ink a plastic folder ordinary, plastic folder high quality with buttons, locks high quality small 65-75 mma poker iron high quality, measurement book d high quality, punching size a4 total 50 pages punching at one time a punching size a4 total 100 pages punching at one time a stamp register 80 pages, stamp register 160 pages, letter receipt register 100 pages a pay posting register marked in red ink 100 pages bill register marked in red ink a pay posting register 200 pages bill register marked in red ink a file leg high quality, calculator high quality 12 digit, fibre plastic measurement tape 30 meter, fibre plastic measurement tape 50 meter, scale scale measure in steel 12 centimetre, scale scale measure plastic/fibre 12 centimetre, eraser pencil high quality, pencil sharpener high quality, pencil eraser rubber high quality, classified account register 100 pages high quality, classified account register 200 pages high quality, classified account register 300 pages high quality, deposit deposit register 200 pages high quality, deposit deposit register 300 pages high quality, momento big fold 8x10 word handwriting, momento toffee sap 10c5 padmavati with writing, momento golden plate 5c7 padmavati with writing, momento y sap 4c9 padmavati with writing, momento round sap 6c3 padmavati with writing

Central Government/Public Sector

CTN :39816404

15 Apr, 2025 15.50 Crore

Chandigarh - Chandigarh

Tender For tender for supply of vitrified tiles , italian marble , granite , wooden acoustic wall panelling , polyster fiber acoustic wall panelling , wooden fibre false ceiling , plaster of paris false ceiling , roller blinds , laminated flush door , aluminium slim profile partitions with clear glass , premium acrylic emulsion wall paint , wpc panelling/ deck tiles , europeanwatercloset , 4 restroom cubicle partitions , wash basin , sensor based urinal , polyvinyl chloride pipes , metal false ceiling , looking mirror , sanitary fixtures for disabled friendly toilet , artificial green grass , structural steel , stainless steel , polycarbonate sheet , frameless sliding door with sensor , kota stone flooring , wall paneling , toilet water proofing , laminate ceiling , laminated ceiling rafters , foamshield waterproofing , logo , 25mm medium class steel conduit , 2.5 sqmm frls copper wire , modular accessories , modular base & cover plate , utp cat 6 cable , 15u wall network rack mount , 2 mtr cat 6 patch cord , 24 port l3 network switch , sfp module , 3.0 mtr optic fiber patch cord , cat 6 information outlet , 24 port loaded jack panel , face plate for single jack , gi underfloor raceways , led profile light , led downlighter/spot light , 2 x 2 led ceiing light , led linear lights , lighting automation , desking module , bollard lights , spike light , outdoor fountain , reception table , sofa , centre table , corner table , meeting table , u shaped conference table , dias table , high back executive chair , staff chairs /visitors revolving chair , c-section chair with writing pad , extended return unit , modular workstation s for contractual staff , digital podium , 86 inch display system , 65 inch display system , video conference system with recording , cable management , wireless presentation , 15.6 inch retractable led display , logic card , 32 display with digital signage , thin client pc , video switching system , microphone system , audio reinforcement system , speaker system , control system , networking , racking system , cables and accessories , video wall , operation resource

Central Government / Public Sector

CTN :39817847

16 Apr, 2025 NA

Kazipet - Telangana

Tender For supply of hylam terminal board with frps sheets fibreglass epoxy electrical insulation, good electrical characteristic, industrial laminate wear resistance , grade 44, size: length 75cm x width 15 cm x 10 mm thi ckness tensile strength 8 kg as per is60981 part-2 -2005. [ warranty period: 30 months after the date of delivery ]

Central Government / Public Sector

CTN :39817849

16 Apr, 2025 NA

Kazipet - Telangana

Tender For supply of hylam terminal board with frps sheets fiberglass epoxy electrical insulation, good electrical characteristics, industrial laminate wear resistance, grade 44,size: length 700 mm x width 280mm x 16mm thickness tensile strength 16 kg as per is60981 part-2 -2005. [ warranty period: 30 months after the dat e of delivery ]

Central Government / Public Sector

CTN :39818769

16 Apr, 2025 NA

Kazipet - Telangana

Tender For supply of hylam terminal board with frps sheets for blocking diodes fitment, brown colour( without fib reglass epoxy) with electrical insulation, good electrical characteristics, industrial laminate wear resistance, grade 44,size: length 300 mm x width 150 mm x 6 mm thickness tensile strength 8 kg as per is60981 part- 2 -2005. [ warranty period: 30 months after the date of delivery ]

CTN :39792081

27 Mar, 2025 2.51 Lacs

Delhi - Delhi

Tender For supply of material for day to day maintenance services under the jurisdiction of postal civil enquiry , sarojini nagar , new delhi. =- acrylic emulsion paint, premium acrylic smooth exterior paint, aluminium composite panel, aluminium extrusions, aluminum sections, board & plywood, ceramic/rectified tiles, cp fittings, cpvc pipes, designer coloured cement concrete floor tiles for external used / concrete paver blocks., epoxy primer & paints, float glass, flush doors (isi mark only), galvanized/stainless steel anchor, fasteners, gun metal gate valve, gypsum board false ceiling, hardner, hydraulic door closer, hydraulic floor spring, laminate, melamine polish, m. s. pipe, marine plywood / bwp ply, oil bound distemper, sanitary fittings, plastic connection pipe, ply wood, pre-coated gi sheet for roofing, polymer modified cementitious grout, pre-laminated particle board is :, 12823 (gr-i, type-ii), primer, pvc rain water pipe & fitting, is:13592 type a, pvc shutter, pvc tank (isi marked), r. c. c. pipes (np-2), solid plastic seat cover for ewc, stainless steel, stainless steel sink with or without draining board., structural silicon sealant, structural steel section, synthetic enamel paints, textured exterior wall paint, towel ring/towel rod/towel, rack., tubular section windows, tmt bars, vitrified tiles, waste pipe, water proofing compound, (liquid), wire mesh, white cement, wall putty, work stations/ modular furniture, stoneware pipe and gully trap, pvc flushing system, tactile tiles, plastic emulsion paint, supply at site of g.i. pipes (15mm dia. nominal bore), supply of u-pvc (working pressure 4kg/cm2) single socketed pipe 110mm diameter, supply of gi union 15mm nominal bore, supply of putty for glass panes., supply of u-pvc bend 110mm bend, supply of u-pvc pipe clip 110mm, providing at site of ptmt waste coupling for wash basin and sink, of approved quality and colour.a) waste coupling 40mm of 79mm length and 62mm breadth weighing not less than 45gms., supply at site of float/froasted glass sheet of nominal thickness 4 mm (weight not less than 10kg/sqm), supply at site of flexible (coil shaped) pvc waste pipe for sink and washbasin having length not less than 700 mm i/c pvc waste fittings, 32mm nominal diameter, 40mm nominal diameter, supply at site of ptmt bib cock 15 mm nominal bore, 86 mm long, weighing not less than 88 gms, supply at site of ptmt stop cock of approved quality and colour., 15 mm nominal bore, 86mm long. weighing not less than 88 gms., galvanised wire mesh of average width of aperture 1.4 mm and nominal dia of wire 0.63 mm, supply at site of ptmt ball cock 15mm complete with epoxy coated aluminium rod & h.d. ball, supply at site of ptmt pillar cock of approved quality and colour., a) 15 mm nominal bore, 107 mm long, weighing not less than 110 gms, supply at site of vitreous china flat back wash basin 450x300 mm, supply of oxidised mild steel handles 100 mm, supply of oxidised mild steel tower bolt (barrel type) 200x10mm, supply of bright fininshed or black enameled mild steel bolts and nuts 50x6 mm, supply at site of polyethylene water storage tank with cover and suitable locking arrangement, supply at site of white vitreous china orissa pattern w.c. pan of size 580x440 mm, supply at site of 100 mm s.c.i. trap with vent heel for w.c, supply at site of flushing cistern p.v.c 10 lts capacity ( low level ) (white) ( with fittings, accessories and flush pipe), supply at site of pvc connection pipe 450 mm with brass unions and collar bush, supply of coarse sand, supply of stone aggregate (single size) : 20 mm nominal size, providing at site of bright fininshed or black enameled mild steel screws 50 mm, providing at site of bright fininshed or black enameled mild steel screws 40 mm, providing at site of bright fininshed or black enameled mild steel screws 25 mm, providing at site of bright fininshed or black enameled mild steel screws 20 mm, supply of cp brass bib cock 15 mm nominal bore, supply

Laminates Sheet Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors