Latest lamp charger rack Tenders | Government lamp charger rack Tenders

State Government

CTN :40947565

18 Jul, 2025 NA

Bankura - West Bengal

Tender For repair and renovation works of electrical installation of three phase electric power socket to run 3 phase machines, air conditioner and supply, installation, testing and commissioning of g plus 2 mrl lift at raipur government polytechnic, bankura-------electrical installation work, supply, installation, testing and commissioning.....

Central Government/Public Sector

CTN :40522900

07 Jul, 2025 NA

Raigarh - Chhattisgarh

Tender For corrigendum : supply of 3 x 2000 kva emergency dg set and accessories for lara stpp stage ii 2x800mw chhattisgarh - 2000 kvae 1500 rpm, 415v, 0.80 pf -lag-, prime power dg set with radiator on common base frame , fuel day tank of 990 litres capacity with accessories , 24v dc, 360 ah, minimum, lead acid automotive type battery , 24 v dc float cum boost battery charger , necessary fuel piping from day tank to engine , exhaust piping, with insulation and aluminium cladding upto 30 meters height with supports , galvanised pre-fabricated support structure for exhaust piping, common for two dg , galvanised prefabricated support structure for exhaust piping- for one dg , acoustic enclosure for one dg with ventilation fans, exhaust fans, if applicable, and lighting fixtures. , lt power, control and instrument cable including all accessories like lugs, glands, ties etc , b-check kit to be supplied at the time of commissioning , first fill of lube oil, coolant and coolant conditioner to be supplied at the time of commissioning , tools and tackles for offered dg set , alternator phase side and neutral side terminal box with ct , mandatory spares for dg sets and panel , amf panel , supervision of erection for one dg set , supervision of testing, commissioning and load trial of one dg set , total freight charges for all supplies including spares

CTN :40932489

21 Jul, 2025 NA

Jamshedpur - Jharkhand

Tender For supply of split air-conditioner of bee 5-star rating, suitable for cooling capacity for the whol e range of 5201 to 6860 2 ton w (2 ton) with the function of cooling only, with rotary compressor, invert er (variable speed) type, suitable for 230 v ac, 50 hz system, with 100% copper coil, eco friendly refriger ant, anti-freeze thermostat, with thermal protection for blower motor & condenser motor. conforming to bi s specification no. is:1391 (part-2) 2023. bee 5-star rating must comply to ministry of power notification no . s.o. 3897(e) dated 29th october 2019 for table 3.2(f) with minimum indian seasonal energy efficiency r atio of 5.0 (applicability date extended by notifications no. s.o. 4485(e) dated 10th december, 2020 and n o. s.o. 4634(e) dated 10th november, 2021). complying to ministry of power notification no.s.0. 2528(e) d ated 8th august 2017 for other requirements. refrigerant copper pipes (suction & return) of minimum 4-m eter length each, nitrile rubber tube with density 55 kg/cubic meter or more, fire performance class 1, ra te of burning class v-0, water vapour diffusion resistance factor (i) more than 12000, service temperature 10 to 105-degree c, surface flame spread class 1 & thickness of minimum 2 inch, relevant test certificates to be submitted. nitrile rubber tube shall be with suitable inner diameter to suit & to wrap the complete le ngth of refrigerant copper pipe and aluminium foil lamination of 0.2 mm thick to cover entire length of the copper refrigerant pipes will be supplied along with each air-conditioner. make- daikin/ lg/ carrier/ blue st ar/ godrej /hitachi/lloyd, voltas/samsung or similar. [ warranty period: 30 months after the date of deliv ery ]

CTN :39038230

18 Jul, 2025 12.13 Crore

Gandhinagar - Gujarat

Tender For corrigendum : supply of goods, tools & equipmentforan international standard itot in fitter tradeat iti tarsali, gujarat, india (package 4: fitter trade) - ss and sc center lathe (all geared) , design, supply, installation, commissioning, testing and training of hydraulic / electro-hydraulic/ analysis and control of hydraulics. , design, supply, installation, commissioning, testing and training of pneumatic / electro-pneumatic/ analysis and control of pneumatic. , design, supply, installation, commissioning, testing and training of advance factory automation training kits , application learning systems , hydraulic power saw machine , cnc turn centre , universal milling machine with minimum specification , vertical milling machine , cnc machining centre , cnc milling tools to suit above machine (sl. no. 187): to accommodate face cutter, shell end mill cutter, taper shank and parallel shank drills/cutters, reamers. taps with suitable tool holders. , surface grinding machine , universal tool and cutter grinding machine , interchangeable ratchet socket set , hand reamer adjustable cover , hand reamer taper , reamer parallel , set combination , micrometer (0-25) , micrometer (25-50) , micrometer (50-75) , micrometer inside (0-25) , vernier calliper (150mm) , vernier height gauges , vernier bevel protractor , drill twist taper shank , drill chuck , wheel dresser , machine vice (4 inch) , machine vice (6 inch) , sleeve drill morse , bench vice , leg vice , dial test indicator , lathe tools hss tipped set , lathe tools bit hss , counter boring and counter sinking tool , arm strong type bit holder rh , arm strong type bit holder lh , arm strong type bit holder straight , straight edge , surface plate , marking table , universal scribing block , v- block pair , square adjustable , angle plate , spirit level , portable hand drill (electric) , twist drill straight shank , twist drill straight shank , taps and dies complete set , taps and dies complete set , taps and dies complete set in box , pipe wrench , pipe wrench , pipe vice , adjustable pipe tap set bsp with die set cover pipe size , wheel dresser(1for4units) , machine vice , machine vice , sleeve drill (morse taper) , bench vice , leg vice , gauge slip as johnson metric set , carbide wear block , gauge snaps , gauge plug single ended , gauge telescopic , dial vernier caliper , vernier micrometer , depth micrometer , vernier caliper , comparators stand with dial indicator , surface roughness comparison plates , digital vernier caliper , digital outside micrometer , digital dial test indicator , hardness tester , flat tongs , round tongs , straight snips , bend snips , solder bit /soldering iron hatchet type , anvil , swage block , trammel , hand groover , portable forge with hand blower , gas cutting torch with different noses , arc welding table with positioner , gas welding table with fire bricks , grinding attachment for lathe , dial test indicator , sine bar , sine bar , micron suitable to measure minimum 300mm distance. (optional) , surface roughness tester , air conditioner , drilling machine pillar type with drill chuck & key. , pedestal grinder double end type. , power saw machine stroke length160 mm , fly press 4t capacity , arc welding transformer-single phase,200 amps. (with cable, electrode holder and all other accessories) , oxy-acetylene gas welding plant with all accessories , tig welding machine , co-ordinate measuring machine having accuracy of 5 , workbench , special tools and equipment , tool holder to suit the cnc machine (sl. no. 183) for turning, threading (external &internal), grooving (external &internal), parting off operations, drilling, boring, undercutting (with 20 inserts for each operation) , worktable to mount small machines , worktable to mount small machines , worktable to mount small machines , work benches with bench vices , dg set (power backup) , engineering drawing trainees tool kit , air conditioning for classroom , air conditio

CTN :39038234

18 Jul, 2025 13.98 Crore

Gandhinagar - Gujarat

Tender For corrigendum : supply of goods, tools & equipmentforan international standard itotin operator advanced machine tools (oamt) tradeat iti suart, gujarat, india (package 4: oamt trade) - surface grinding machine , cnc machining centre , cnc milling tools for above machine , cnc turn centre , edm , cnc simulator , vertical-spindle five-axis machining centres , cnc tool pre setter , ss and sc centre lathe (all geared) with having minimum specification , universal milling machine with minimum specification , horizontal milling machine with minimum specification , vertical milling machine , universal tool and cutter grinding machine , cnc lathe machine , tool holders to suit the cnc turn centre , jig boring , gear hubber , gear shaper machine , power saw machine-hydraulic feed system , cylindrical grinder , power saw machine , pedestal grinder double end type. , radial drill motorized with tapping attachment , drilling machine pillar type with drill chuck & key. , slotter , double column planer , shaping machine , shaping machine , co-ordinate measuring machine , cnc wire cut edm (electrical discharge machining) , special tools and equipment , involutes gear module , surface plate , marking table , scribing block universal , v-block , combination set , spanner double ended metric , adjustable spanner , reduction sleeve morse taper , angle plate adjustable , oil stone , number drill h.s.s(parallel shank) , drill (parallel shank) , twist drills , drill chuck , centre drill , grinding wheel dresser(diamond) , grinding wheel dresser hunting type , c- clamp , c-clamp , tap & die set inbox metric pitch , reamer , reamer adjustable , machine vice , machine vice , machine vice , universal machine vice , universal table angle plate , taper shank twist drill set , shaper tool holder turret type , knurling tools (set of 3) straight and diamond , carbide tipped tools of different sizes and shapes (through away tips) , micrometer outside , micrometer outside , micrometer outside , digital micrometer outside , digital micrometer outside , digital micrometer outside , digital vernier calliper , micrometer depth gauge , dial vernier calliper , vernier height gauge , vernier bevel protractor with blade , bevel gauge , telescopic gauge , sine bar , inside micrometer , inside micrometer , dial test indicator , slip gauge set (normal set) metric , plug gauges , ring gauges , snap gauge , vernier caliper , cylindrical cutter , cylindrical cutter , side and face cutter , side and face cutter , side and face cutter , side and face cutter , equal angle cutter , equal angle cutter , equal angle cutter , t" slot , t" slot cutter , t" slot cutter , t" slot cutter , single angle cutter , single angle cutter , single angle cutter , single angle cutter , double unequal angular cutter , double unequal angular cutter , end mill cutter , concave cutter , convex cutter , corner rounding cutter , corner rounding cutter , slotting cutter , slotting cutter , slitting saw cutter , slitting saw cutter , slitting saw cutter , dove tail milling cutter parallel shank , dove tail milling cutter parallel shank , dove tail milling cutter parallel shank , dove tail milling cutter parallel shank , shell & end mill cutter , shell &end mill cutter , face mill cutter with inserted tip , face mill cutter with inserted tip , face mill cutter with inserted tip , involutes gear module , air conditioner split , dg set , air conditioner , wall charts, transparencies and dvds , air conditioner , steel rule , divider , centre punch , hammer ball pane , combination plier , file flat bastard , file flat 2nd cut , engineers screwdriver , file flat smooth , cold chisel flat , try square , straight edge steel , steel tape , soft hammer , sprit level , hammer ball pein , screwdriver, heavy duty , hammer lead , screwdriver , allen hexagonal keys , angle plate , solid parallel sine pair (different size) in metric , oil can pressure feed , file flat 2nd cut , file flat smooth , fi

Central Government/Public Sector

CTN :40902619

22 Jul, 2025 NA

Nicobar Island - Andaman And Nicobar Islands

Tender For supply of materials for alhw guest and ae civil maintenance sub division - microwave oven 21 litre energy consumption- microwave- 1200 w, grill- 1100 w , convection- 1700 w , max- 2350 w , vaccum cleaner with nozzle, capacity-15 l, volume-10 lvolt-230v, input power-1100w, function- wet and dry cleaning, max vaccum pressure-270 mbar, filter surface area-2300 cm2, no of wheel-4 , aquaguard marvel nxt 8 stage uv uf active copper stainless steel tank water purifier, weight-6 kg, tds range-0-200 mg per l input water pressure- 0.3 to 2 kg per cm square , supply, installation, testing and commissioning of 2 ton cap 3-star and above rating non inverter air conditioner of split type with remote control including cost of voltage stabilizer 5 kva , double door refrigerator 200 ltr capacity reputed make , semi automatic washing machine -9.5 kg reputed make , electrical chain saw 24 inch speed-10500 rpm, motor type-copper, displacement-3000w, 1600 watt motor

Central Government/Public Sector

CTN :40870336

07 Jul, 2025 NA

Bhagalpur - Bihar

Tender For supply of 500 kva ,1500 rpm, 415v 0.80pf -lag dg with radiator and accessories on common base frame , 500 kva dg set - fuel day tank of 990 litres capacity with accessories and stand. , 500 kva dg set-24v dc, 360 ah ,minimum, lead acid type automotive battery with accessories and stand, to be supplied at the time of commissioning. , 500 kva dg set-float cum boost battery charger panel with stand for one dg , 500 kva dg set-necessary fuel piping, supports, accessories for one dg , 500 kva dg set-silencers, exhaust piping and stack, support structures support structure with foundation bolts and accessories, insulation and cladding and hardwares. height as per latest cpcb norms. , 500 kva dg set-acoustic enclosure for one dg with lighting fixtures. , 500 kva dg set-lt power, control, instrument and screened cable including all accessories like lugs, glands, ties etc. for one dg set. , 500 kva dg set-engine b-check kit for one dg, to be supplied at the time of commissioning. , 500 kva dg set-first fill of lube oil, coolant and coolant conditioner at site for one dg, to be supplied at the time of commissioning. , 500 kva dg set-tools and tackles specific to offered dg set. , 500 kva dg set-alternator terminal box with extension busbars , 500 kva dg set-amf panel for 500kva dg set , 500 kva dg set-mandatory spares for 500kva dg set and panels , 500 kva dg set- supervision of erection of one dg set with exhaust piping and structure, fuel piping, control panels and cabling , 500 kva dg set-supervision of testing, pre-commissioning checks, and commissioning and load trial of one dg set with control panels as per operating philosophy. , 750 kva ,1500 rpm, 415v 0.80pf -lag dg with radiator and accessories on common base frame , 750 kva dg set -fuel day tank of 990 liters capacity with accessories and stand. , 750 kva dg set -24v dc, 360 ah, minimum, lead acid type automotive battery with accessories and stand, to be supplied at the time of commissioning. , 750 kva dg set- float cum boost battery charger panel with stand for one dg , 750 kva dg set-necessary fuel piping, supports, accessories for one dg , 750 kva dg set-silencers, exhaust piping and stack, support structures support structure with foundation bolts and accessories, insulation and cladding and hardwares. height as per latest cpcb norms. , 750 kva dg setacoustic enclosure for one dg with lighting fixtures. , 750 kva dg set-lt power, control, instrument and screened cable including all accessories like lugs, glands, ties etc. for one dg set. , 750 kva dg set-engine b-check kit for one dg, to be supplied at the time of commissioning. , 750 kva dg set-first fill of lube oil, coolant and coolant conditioner at site for one dg, to be supplied at the time of commissioning. , 750 kva dg set-tools and tackles specific to offered dg set. , 750 kva dg set-alternator terminal box with extension busbars , 750 kva dg set-amf panel for 750kva dg set , 750 kva dg set-mandatory spares for 750kva dg set and panels , 750 kva dg set- supervision of erection of one dg set with exhaust piping and structure, fuel piping, control panels and cabling. , 750 kva dg set-supervision of testing, pre commissioning checks, and commissioning and load trial of one dg set with control panels as per operating philosophy. , freight

State Government

CTN :40756934

02 Jul, 2025 10.04 Lacs

Agartala - Tripura

Tender For supply and installation of some articles to the residential office of the honble deputy speaker, tripura legislative assembly, bardowali, agartala during the year 2025-26 - providing of split type high wall 2.00 tr (rated cooling capacity should not be less than 6,000 kcal/hr or 24000 btu/hr or 7000 kw) split a.c. machine with inverter compressor technology operating on non-cfc refrigerant (r-410a/r-32/equivalent refrigerants) suitable for wall mounting conforming to is:1391 (part-ii) specification (evaporator & condenser must be of pure copper) not less than 3 (three) star rating (latest standard), operates on single phase 230 volt, 50hz, ac supply maximum current drawn 11.0 ampere, including supply of 3.0 mtr copper pipe (both for suction & liquid line), 3.0 mtr 4 (four) core electrical connecting cable, remote control unit in/c batteries, 16 amps power top etc complete, capable of performing a) cooling b) dehumidifying c) air circulation d) filtering as per direction of the engineer-in-charge., standard installation of 1.5 tr/2.00 tr capacity high wall split air conditioner i/c providing of electrical plug top of required capacity, flling up/ repairing of drilled portions by cement mortar, painting etc. as per direction of the engineer-in-charge., fabrication of m.s. platform for placement of condensing unit by using m.s. angle of (50x50x5) mm size base plate, nuts & bolts or cradle of suitable sizes i/c painting, fitting, fixing grouting by cement mixer as per direction of the engineer-in-charge., providing hard pvc pipe of best quality of 25 mm diameter including necessary clamping and fitting for draining of condensate water from indoor unit as per direction of the engineer-in-charge., supply and installation of additional length of copper pipe of suitable diameter for suction and liquid line between indoor and outdoor units (for 1.5 tr & 2 tr ac) beyond the standard length as per direction of the engineer-in-charge. (if required), providing and connecting electric control cables between mcb to indoor/outdoor. 3c x 2.5 sq. mm copper cable., supplying & fixing of 1200 mm sweep white color ac ceiling fan capacitor type double ball bearing complete with 300 mm down rod, canopies, shackles, 3nos blades, including wiring the down rod with 2x1.5 sqmm pvc insulated copper conductor cable(fr) (isi marked, bee 1 star/minimum service value 4.0 m /min/w): -, supplying and fixing of 20 mm dia extra down rod (gi pipe medium guage) with necessary hole for installation of ceiling fan as required., wiring for light/fan/ exhaust fan/ call bell point with 2x1.5 sq. mm pvc insulated copper conductor cable (fr) in pvc conduit (medium gauge) recessed in slab/ walt complete with 6/10 amps modular type switch, cover plate, gl box including necessary connection etc. as required, supplying and fixing of the following modular accessories including necessary connection etc. as required 3/6 pin 16/20 amps socket outlet (2m), supplying and fixing of the following modular accessories including necessary connection etc. as required4 step fan regulator (1m), supplying and fixing of the following modular accessories including necessary connection etc. as required20/25 amps single phase motor starter switch (2m), wiring for circuit/sub-main with the following sizes pvc insulated copper conductor cable (fr) in pvc conduit (medium gauge) recessed in slab/ wall etc. as required, earthing with 40 mm dia g.i. earth pipe (medium gauge) 4.5 m. long complete with masonry enclosure on top cl cover plate size 12"x 12" having locking arrangement including cc work, holes on earth pipe etc. as required, proving and fixing/drawing of 4.06 mm dia (8 swg) g.i. 10 wire on surface or in existing g.j/pvc/ polythene pipe for loop earthing as required., executive desk with return unit, size: 2100(w)x 2250(d) x 750 (h) mm, executive revolving chair, visitor chair, godrej 4 door bookcase (1742 h x 914 wx 320 d) mm

Central Government/Public Sector

CTN :40792835

14 Jul, 2025 NA

Kota - Rajasthan

Tender For replacement and provision of power assets including cable, pump, air conditioner & air-cooling works etc.

Central Government/Public Sector

CTN :40743076

11 Jul, 2025 NA

Bundi - Rajasthan

Tender For provision of electrical power supply arrangement and air conditioner for proposed video surveilliance system (vss) at stations of kota division (name of work at irpsm- provision of integrated emergency response system (video surveillance system) at 05 railway station viz. bhawanimandi, ramganjmandi, bundi, gangapur city & hindaun.)

Lamp Charger Rack Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector