Latest lan module Tenders | Government lan module Tenders

Central Government/Public Sector

CTN :45044960

11 May, 2026 NA

Hanumangarh - Rajasthan

Tender For supply of digital queue management and customer flow control system procurement package : : - integrated queue management terminal unit , system installation and commissioning service , display and notification interface system , connectivity and network integration module , software configuration and control interface

corporations/Associations/Others

CTN :45024602

12 May, 2026 NA

Puruliya - West Bengal

Tender For supply of rtps d d - igbt heatsink mounted single module 600 amp 1200 v , pca operator logic board 1 phase 240 vac ups for hipulse 2x125 kva ups system , transformer sensing copper 3 phase 60 va 415 v380 v220 vby31.5 v class f for 2x125kva ups system , pca igbt driver board 7400 for 2x125kva hipulse ups system , pca unsync transfer board for hipulse 2x125 kva ups systemmodel7400m , thyristor heat sink mounted module 190 amp average 300 amp rms 1600 v for 2x125kva ups system , thyristor heat sink mounted module 540 amp average 850 amp rms 1400 v semipack 5 for 2x125kva ups system , fan axial 4 inch 230 vac 1 phase 50 hz 95 cfm 2600 rpmpart code 181000016000for 2x125kva ups system , pca high voltage interface board 1 phase 240 vacpart code100208011021for hipulse 2x 125 kva ups system , fan, centrifugal 230 vac 1 phase 50 hz 335 48 cfm 2500 rpmpart code0000000e5009 , transformer control copper 1 phase 60 va 220 230 240 vby17 0 17 v part code291606011001for 2x125kva ups system , pca ups logic board 1 phase 240 vacpart code100221021031for hipulse 2x125 kva ups system , pca rectifier driver board 7400m for 2x125kva hipulse ups system , current transformer bar primary sensing 100 1 5 va class 1 moulded resin with lug fitting , hall effect sensor 100 amp 0 to 300 amp 4 v open loop 15 v panel mounting hta , fan axial 8 inch 230 vac 1 phase 50 hz 530 cfm 2700 rpmpart code 181000084000 for 2x125 kva ups system , lcd display module for ups make db power electronics pvt ltd sunlike lcd 20x2 , pca dc dc power supply board 2811 03025401part code100204011023for hipulse 2x 125 kva ups systemmodel 400m , pca panel synoptic mimic board for 2x125 kva hipulse ups make emerson network power i pvt ltd ) /bid number : gem/2026/b/7483683 * /dated: 28-04-2026 & & / bid document 1 / 19

CTN :44992890

18 May, 2026 NA

Asansol - West Bengal

Tender For supply of network interface module(nim)interface card with compatible with existing pdmuxas per spec. no. irs-tc 68/2012 rev.0 with amendmentor latest. make: webfil or similar [ warranty period: 30 months after the date of delivery ]

CTN :44844547

25 Apr, 2026 NA

Goa - Goa

Tender For supply of time controller , start mic , push button , swimming touch pad , swimming touch pad cart , swimming lane module , waterproof adaptor , timer , harness , software , electronic score board

Corporations And Associations And Others

CTN :44771811

14 Apr, 2026 10.45 Lacs

Delhi - Delhi

Tender For supply and installation of children play equipments under mlalads funds in different parks under municipal corporation of delhi. - supply & installation of children play equipments under mlalads funds in different parks under municipal corporation of delhi., supply and fixing of arch swing. leg support : 80 mm nb pipe, seat- anti skid rubber belt. bearing : heavy duty ball bearing. area : 3.0 m x 2.5 m. height : 2.5 m. top bar : 60 mm nb pipe. suspension : 6 mm rubber coated chain. the topcoat is duly powder coated. in this one child can enjoy the swing at one time. the arch shaped side frame shall be made of 80mm nb b class gi pipe shall be made up of 50mm nb b class gi pipe. the frame shall be powder coated to give an aesthetic look. the swing shall be made up of 10mm thick anti skid rubber top the rubber belt seat / u shape swing seat with 2 eye bolt tyb-s06. made of polyurethane of size 53 x 20.5 x 20 shall be suspended on 6mm rubber coated gi chairn. the bail bearings shall be mounted inside a specially designed nylon clamp. coating with pure polymer powder with 7 tank treatment 60 to 70 micron thickness. the holding down/fixing of equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size) (as per direction of officer in charge.), supply and fixing of std. see sawhandle :-20 mm n b pipe. lever-32 mm n b pipe. colmun : 60 mm n b pipe. bearing : nylon bush press fitted. seats: frp seats with steel frame. the topcoat is duly powder coated. the level of see saw shall be made from 15, 20 and 25mm nb b class gi pipe. the seat of see saw shall be made from frp/lldpe. the stand and bush bearing made in 40mm nb b class gi pipe. see saw lever shall be welded to 5mm thickness ms plate for nut bolting with stand. all pipes flat shall be powder coated to avoid rusting. coating with pure polymer powder with 7 tank treatment 60 to 70 micron thickness. the holding down/fixing of equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size)c37c40c41c39 (as per direction of officer in charge.), supply and fixing of frp box slide.ladder-frame-25mm n b pipe. handdril-20 mm n b pipe. support-40 mm n b pipe. area : 4.8 m x 0.5 m. platform height : 2.1m. chute :4.0 mm thk f r p. chute length: 4 m. step-width- 75mm. thread 90mm. riser 250mm. the main frame of 2.1mtr height plat-form having pipes are of 40 mm nb b class gi pipe. the box slide is of material frp (fibre reinforced plastic) with attractive beauty colour and flat surface at end of slide for safe landing. the reeling made from 20 mm nb b which can be use like handle to get a grip while start sliding. -the staircase made from 25 mm nb b class g.i. pipe. coating with pure polymer powder with 7 tank treatment 60 to 70 micron thickness. the holding down/fixing of equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size) (as per direction of officer in charge.), supply and fixing of spiral slide. ladder-frame- 25m m n b pipe. handrail - 20 mm n b pipe. centre support- 50 mm n b pipe. area : 2.5 m x3.5 m. platform height : 2.1 m. chute f r p the topcoat is done using the best quality brand or duly powder coated. spiral slide shall be chute made of frp (fiber reinforced plastic / lldpe (low linear density poly ethyline) having thickness of 4mm slide center support shall be 80mm nb b lass gi pipe. landing module shall be supported by 20mm nb b class gi pipe. slide extension platform shall be made from frp / lldpe. the railing shall be made from 15mm nb and 20nn nb b class gi pipe. all pipes shall be coated with pure polymer powder with 7 tank treatment 60 to 70 micron thickness. the holding down/fixing of equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size) (as per direction of officer in charge.), supply and fixing o

Central Government/Public Sector

CTN :44322711

02 Apr, 2026 NA

Ropar - Punjab

Tender For corrigendum : supply of new / refurbished spare modules for abb symphony harmony dcs network processing module make: abb model: innpm22 firmware version: b4, new / refurbished spare modules for abb symphony harmony dcs network slave module make: abb model: innis21 firmware version: b7, infi-net interface cable (nis to ntcl) model: nkls01-10 make: abb 300v, 80 deg c, #24 awg for symphony harmony dcs, npm22 redundancy link cable model: pmkhrmbrc3000b make: abb for symphony harmony dcs

Lan Module Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

corporations/Associations/Others

Corporations And Associations And Others

Central Government/Public Sector