Latest land survey Tenders | Government land survey Tenders

State Government

CTN :40238032

20 May, 2025 NA

Rishikesh - Uttarakhand

Tender For consultancy services of survey work, soil testing, design, drawing, preparation of dpr, vat, forest land and land acquisition file for conversion of road from two lanes to four lanes from km. 02 to 23 of km 16 of rishikesh bhaniyawala marg to airport

State Government

CTN :40226955

12 May, 2025 10.71 Lacs

Nandyal - Andhra Pradesh

Tender For soil investigation for the proposed work drilling of bore holes and extraction of ud soil samples also testing of ud soil samples in earth dam of alaganuru balancing reservoir near alaganur (v), midthur (m), nandyal district.

CTN :40241122

28 May, 2025 NA

Hooghly - West Bengal

Tender For supply of disconnecting and taking out defective under ground lt cable from trenches pole pipe floor wall etc , supply laying testing and connecting xlpe sheathed cable heavy duty with stranded aluminium conductor 1100 volt grade of size 4.0 core 10 sqmm. , all as per boq item no 2.00 here in before but of size 3.5 core 70 sqmm. complete all as specified , all as per boq item no 2.00 here in before but of size 3.5 core 120 sqmm. complete all as specified , excavating in trenches n.exc 1.5 m wide and n.exc 1.5 m depth for foundation etc or for shafts wells cesspits manhole pier hole taking out and laying of cable etc , returning filling in including spreading levelling watering and well ramming in layers not exc. 250mm in soft loose soil complete all as specified and as directed. , removing excavated materials soils not exc. 50.00 mtr and depositing where directed at a level not exc. 1.50 mtr above the starting point in soil complete all as specified and as directed. , m and l sand cushioning dry in trenches for protec tion of ug cables below above and around the ug cable , m and l for fly ash bricks locally available laid dry width wise across the line of cable in trenches for protection of ug cable , supplying and fixing galvanised mild steel pipe tubing light grade complete with all fittings of 80 mm bore dia laid in trenches under roads fixed to poles , supplying and fixing galvanised mild steel pipe tubing light grade complete with all fittings of 50 mm bore dia laid in trenches under roads fixed to poles , supplying and fixing galvanised mild steel pipe tubing light grade complete with all fittings of 100 mm bore dia laid in trenches under roads fixed to poles , m and l for boring of horizontal hole under road pavement hardstanding suitable for passing through up to 80 mm bore complete all as specified. , s and fix hdpe dwc double wall corrugated of dia 25 mm incl disconenction and connection to cable near oh for pipe fixing incl joints complete , s and fix hdpe dwc double wall corrugated of dia 40 mm incl disconenction and connection to cable near oh for pipe fixing incl joints complete , s and fix hdpe dwc double wall corrugated of dia 50 mm incl disconenction and connection to cable near oh for pipe fixing incl joints complete , material and labour for earthing complete with galvanised steel earth plate electrode 600x600x6 mm mm buried directly in ground earth pit not less than 2.25m below ground level , supply and fix metal cable route indicator of height 750 mm ms flat of 40 mm x 4 mm with circular 100 mm diameter ms sheet of minimun thickness 3mm , taking down dismantling of unserviceable lt panels complete all as specified and directed by engineer in charge. , supply designing install testing commission 3 phase and neutral 415 volts outdoor type cpri type tested having certification , all as per boq item no 57.00 here in before but of size 1.00m x 0.45m x 1.00m with the following incoming and outgoing , wrecking crow bar or claw bar as per is 706 (q3)

CTN :40141116

08 May, 2025 NA

Almora - Uttarakhand

Tender For corrigendum : providing of selection of laboratories for testing of products/material - soil; soil testing complete all as specified computation of bearing capacity for bldgs; meter; civil

CTN :40245321

13 May, 2025 50.7 Thousand

Shimla - Himachal Pradesh

Tender For construction of ocr complex for ib post kasauli (h.p.) sh: enabling works as digital survey and soil testing of land

CTN :40227717

13 May, 2025 50.7 Thousand

Shimla - Himachal Pradesh

Tender For construction of ocr complex for ib post solan (h.p.) sh: enabling works as digital survey and soil testing of land

CTN :40111283

14 May, 2025 NA

Nadia - West Bengal

Tender For corrigendum : empanelment of agencies for soil exploration testing and preparation of report for different engineering works at different locations under irrigation and waterways department govt of wb for a period of three years

CTN :40218961

13 May, 2025 31.06 Lacs

Multi City - Karnataka

Tender For procurement of lab equipments for quality control lab of no.2 q c subdivision gorur - supply, installation, testing and commissioning digital thermometer range -50 to 280 deg c , item code aim-9622 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning specific gravity bottle- 50ml, item code mis-401 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning environmental test chamber eco friendly with cooling temperature range-10c to 60c +-1c, humidity-50% to 95% + -4%, double walled, inner chamber ss 304, digital controller cum indicator, size - 610x610x610mm, item codeaim-9878 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning mould, steel, for 70.6mm cube-for preparation of mortar and lime cubes, item code aim-414 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning vibration machine, with built-in digital timer, nabl calibrated - as per is4031, machine is supplied with one cube mould with isi certification mark and poking rod. suitable for operation on 220v, 50hz, single phase, ac supply. item codeaim-418-2 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning core cutter - ref. standard is2720 (part 29) , core cutterof known volume is driven into the soil by a rammer. the core cutter is dug out, trimmed and the soil inside weighed and dried for moisture and density check. the equipment consists of the following replaceable partsrammer, with steel rod item codeaim-161 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning core cutter - ref. standard is2720 (part 29) , core cutterof known volume is driven into the soil by a rammer. the core cutter is dug out, trimmed and the soil inside weighed and dried for moisture and density check. the equipment consists of the following replaceable parts steel dolly, 25mm high and 100mm dia item code aim-161 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning compaction test apparatus, manual light compaction made of mild steel- as per is 2720 (part 7) the construction quality control is essentially to check the density of compacted soil achieved in the field, thereby checking its strength. item code aim-110-ms with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning laboratory electric oven, with digital indicator cum controller with safety alarm, range 50 deg to 250 deg c +/-1 deg c with air circulating fan, s.s. inside size 600 x 900 x 450mm conforming to is 2720 item code aim-9109 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning specific gravity bottle-50ml conforming to is2386 item code mis-401 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning sieves as per is 2720 (part 4) sieve brass frame 20cm dia x 150 microns, item code aim-05322 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning sieves as per is 2720 (part 4) sieve brass frame 20cm dia x 160 microns, item codeaim-05339 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning sieves as per is 2720 (part 4) sieve brass frame 20cm dia x 180 microns, item code aim-05321 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testi

CTN :40218968

13 May, 2025 53.37 Lacs

Multi City - Karnataka

Tender For procurement of lab equipments for quality control lab of no 3 qc subdivision yediyur - supply, instalation, testing and commisioning core cutter - ref. standard is 2720 (part 29) , core cutter of known volume is driven into the soil by a rammer. the core cutter is dug out, trimmed and the soil inside weighed and dried for moisture and density check. aim-161 with all lead and lift complete as per direction of the engineer-in-charge of work., supply, installation, testing and commissioning sample tray (enamel tray), size 200x150x30mm with all lead and lift complete as per specification and direction of the engineer-in-charge of work., supply, installation, testing and commisioning sample tray (enamel tray), size 300x250x40mm with all lead and lift complete as per specification and direction of the engineer-in-charge of work., suply, installation, testing and commisioning sample tray (enamel tray), size 450x300x40mm with all lead and lift complete as per specification and direction of the engineer-in-charge of work., supply, instalation, testing and commisioning sample tray (enamel tray), size 600x450x50mm with all lead and lift complete as per specification and direction of the engineer-in-charge of work., suply of sample tray (enamel tray), size 50x500x50mm with all lead and lift complete as per specification and direction of the engineer-in-charge of work., supply, instalation, testing and commissioning compaction test apparatus, manual light compaction made of mild steel-as per is 2720 (part 7) the construction quality control is essentially to check the density of compacted soil achieved in the field, there by checking its strength. aim-110-ms with all lead and lift complete as per specification and direction of the engineer-in-charge of work., supply, instalation, testing and comissioning speedy moisture meter, as per is2720 (part 2), is12175 range 0-25% (gauge div.0.5percent) with digital weighing balance. calcium carbide reagent, moisture gauge, 0-25% x 0.5%, digital balance, 50g, steel balls, 12.7mm dia and 25mm dia, scoop, cleaning brush, aluminum dish. item code aim-036-1 with all lead and lift complete as per specification and directions of the engineer-in-charge of work., suply, instalation, testing and comissioning micro oven with all lead and lift complete as per specification and direction of the engineer-in-charge of work., suply, instalation, testing and comissioning laboratory electric oven with digital indicator cum controller with safety alarm, range 50deg to 250 deg c +/-1 deg c with air circulating fan, s.s. inside size 600 x 900 x 450mm item code aim-9109 with all lead and lift complete as per specification and direction of the engineer-in-charge of work., supply, installation, testing and comisioning specific gravity bottle-100ml item code aim-401-1 with all lead and lift complete as per specification and direction of the engineer-in-charge of work., suply, installation, testing and comissioning specific gravity bottle-50ml item code aim-401 with all lead and lift complete as per specification and directions of the engineer-in-charge of work., suply, installation, testing and commissioning of sieve shaker, motorised, with built-in digital timer and 20cm and 30cm dia adaptor suitable for operation on 220v, 50hz, single phase, ac supply item code aim-054-1 with all lead and lift complete as per specification and direction of the engineer-in-charge of work., suply, installation, testing and comissioning sieves as per is 2720 (part 4) sieve brass frame 20cm dia x 1.6mm, item codeaim-05338 with all lead and lift complete as per directions of the engineer-in-charge of work., suply, installation, testing and comissioning sieves as per is 2720 (part 4) sieve brass frame 20cm dia x 1.70mm, item codeaim-05308 with all lead and lift complete as per directions of the engineer-in-charge of work., suply, installation, testing and comissioning sieves as per is 2720 (part 4) sieve brass frame 20cm dia x 2.00mm , item cod

CTN :40218973

13 May, 2025 34.46 Lacs

Channarayapatna - Karnataka

Tender For procurement of lab equipments for quality control lab of no.1 hrbhlc subdivision q.c channarayapatna - supply, installation, testing and commissioning specific gravity bottle-100ml conforming to is2386 mis-401-1 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning sieves as per is 2720 (part 4) sieve brass frame 20cm dia x 3.35mm , item code aim-05304 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning sieves as per is 2720 (part 4) sieve brass frame 20cm dia x 10mm , item code aim-05337 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning environmental test chamber eco friendly with cooling temperature range-10c to 60c +-1c, humidity-50% to 95% + -4%, double walled, inner chamber ss 304, digital controller cum indicator, size - 610x610x610mm, item code aim-9878 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning digital compression testing machine, capacity 1000kn, range 1000kn, least count 0.1kn, max.clearance between platens 390mm, 260mm, platen size 222.0 dia, piston dia 157mm, piston stroke 50mm, specimen size 100mm & 150mm cube, 100mm dia x 150mm dia cylinder, one electric motor, single phase 220v, 50hz, ac supply digital display, item code aim-314e-dg-1 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning vibration machine, with built-in digital timer, nabl calibrated - as per is4031, machine is supplied with one cube mould with isi certification mark and poking rod. suitable for operation on 220v, 50hz, single phase, ac supply. item code aim-418-2 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning sieves as per is 2720 (part 4) sieve brass frame 20cm dia x 90 microns, item code aim-05325 with all lead and lift complete as per directions of the engineer-in-charge of work. , supply, installation, testing and commissioning heating gloves item code aim-132 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation,testing and universal automatic compactor aim-11001-ms ,compaction mould 100mm id, 127.3mm height 1000ml volume,complete with collar and base plate, made of mild steel and aim-11101-ms - compaction mould 150mm id, 127.3mm height 2250ml volume, rammer - circular faced 50mm dia adjustable to 2.6kg or 4.9kg weight, drop - adjustable to 310mm or 450mm.with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation,testing and commissioning digital laboratory california bearing ratio test apparatus , as per is2720 (part xvi). suitable for operation on 220v, 50hz, single phase, ac supply,digital indicator. no of channels - 2 nos, load cell , capacity - 50 kn compression type, maximum overload -110% of the rated capacity, item code aim-121-4-ms with all lead and lift complete as per directions of the engineer-in-charge of work, supply, installation, testing and commissioning core cutter - ref. standard is2720 (part 29) , core cutterof known volume is driven into the soil by a rammer. the core cutter is dug out, trimmed and the soil inside weighed and dried for moisture and density check. replaceable parts steel dolly, 25mm high and 100mm dia item code aim-161 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning core cutter - ref. standard is 2720 (part 29) , core cutter of known volume is driven into the soil by a rammer. cylindrical core cutter, made of steel 100mm dia x 130mm long, steel dolly, 25mm high and 100mm dia rammer with steel rod item code aim-161 with al

Land Survey Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government