Latest landmark board Tenders | Government landmark board Tenders

CTN :41511742

12 Sep, 2025 NA

Sealdah - West Bengal

Tender For corrigendum : [i] provision of improvement and renovation work at lc gates including all other ancillary works under sr. divisional engineer/i/sealdah section and [ii] provision for various type road indication board at various level crossing gate over sealdah division.

CTN :41678387

16 Sep, 2025 NA

Kanchipuram - Tamil Nadu

Tender For corrigendum : rectification of electrical safety defects - supply and installation of electrical danger notice boards conforming to is 2551 1982 and the indian electricity rules, 1956. each board shall be fabricated from mild steel plate not less than 1.6 mm thick, vitreous-enamelled in visible red finish, with lettering, figures, and skull-and-crossbones emblem in signal white. plate size 200 150 mm with rounded corners, suitable for 415 v medium-voltage installations, bearing bilingual wording (english and tamil) centrally spaced as per the standard. fixing holes of suitable diameter for rivets shall be provided at the corners. boards shall be permanently affixed in conspicuous positions on distribution boards and panels using corrosion-resistant rivets or equivalent fasteners. the rate shall be quoted per piece inclusive of supply of board, rivets, and complete affixing, inspection, testing, cleaning, recommissioning, and submission of the test report for the lightning protection system installed on a 30 metre-high ms wireless tower, including the removal and replacement of all associated fasteners on the downcomer gi plate, ensuring full compliance with applicable standards and operational safety requirements. , inspection and testing of earth electrodes; reconditioning and refilling of earth pits; removal of corrosion from contact plates; replacement of fasteners; cleaning of earth pit troughs; correction of wall separators for earth pits; painting with yellow colour; fixing of durable identification labels with red-coloured text in the respective troughs; provision of closure slabs; and submission of test reports along with photographic evidence. walls to be provided newly: 5- earth pits with existing walls: 22, refilling of silica gel in 11 kv/415 v step-down transformer breather, ensuring proper colour indication and complete replacement of exhausted, dehydrated, or saturated silica gel., insulation and safety covering of exposed live terminals in the 125 kva dg set and of the outer surface of the tneb ht meter box using pvc/acrylic insulation sheets of adequate thickness, rating, and appropriate size suitable for the respective voltage levels, ensuring full electrical insulation and compliance with safety standards. size; 30x20 inches-1 no. 12x24 inches-1 no.

CTN :41803035

12 Sep, 2025 NA

Sealdah - West Bengal

Tender For [i] provision of improvement and renovation work at lc gates including all other ancillary works under sr. divisional engineer/i/sealdah section and [ii] provision for various type road indication board at various level crossing gate over sealdah division.

CTN :41734802

11 Sep, 2025 49.90 Lacs

Kishangarh - Rajasthan

Tender For providing of street light providing and fixing - providing & fixing of ik08, ip 66 protected led street lightluminaire on existing bracket/pole. fixture made of powder coatedsingle piece pressure die cast aluminum material with heatdissipation fins on housing with uv stabilized pc (uv stablizationreport submitted for uv cover ) /toughened glass cover andsecondary lens on each led & should be smd type of 3 to 5 watteach . the system efficacy >=125 lm/ wt and potted driver & has aunique bis r number with input voltage ac 120 to 270 v ac withhigh voltage cutoff @>=300 v ac and auto resetting safety ,power factor >0.95 driver efficiency >85% ,thd(i) 10% humidity10% to 90% rh working temp -5c to 45c . driver current 750ma.the luminaire shall be bis certified and trade mark certified. lifeexpectancy equal or more than 50000 burning hrs with minimum70% lumen maintened , cri >70 and cct 5700k +355k. surgeprotection shall be min 4 kv internal and min 10 kv external insidedriver compartment. driver should be phase to phase protection of440 v for 4 hrs. manufactures word mark/nameengraved/embossing on die cast housing to allowtraceability/authenticity. fixture shall be as per is 10322complianced.oem must have its own in house nabl lab setup forall testing facilities for led fixtures. (lm79/lm80) certificate/report with liable warranty of product/accessories from oem shall besubmitted. all as per pre approved by engineer in-charge. foradditional technical parameters of products/ work , refer annexure"a" attached with this bsr .led street light fixture with minimum lumen output 3700 lm, led street light fixture with minimum lumen output 5600 lm, providing & fixing of street light bracket made out from following size of b class , medium class g.i. pipe confirming to is : 1239 p - 1 ( 2004 ) with heavy duty pole clamp, saddles suitable fastners etc. as required. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., supply & drawing wiring for sub mains isi marked (is:694) 1100 volts grade pvc insulated flat twin core sheathed solid aluminium conductor with 10 swg g.i. support wire duly clipped etc. asrequired. for additional technical parameters of product / work refer annexure a attached with this bsr 4.0 sq.mm, providing & fixing of mechanical / digital time switch having following day / week programme and minimum 100 hours reserve and ac1 rating of 16-20 amperes including making connection,programming conforming to iec 60730-1 and 60730-2-7 etc. as required. all as per pre approved by engineer in-charge. foradditional technical parameters of products/ work , refer annexure"a" attached with this bsr . one day reserve (analog type ), providing & fixing of 240/415 v ac mcb with positive isolation of 10ka breaking capacity (b/ c/d tripping characteristic as per type ofload and site requirement) 4 kv impulse withstand voltage, isimarked is 8828(1996) / conforming to iec 60898-1 2002, iec60947-2, low watt losses, trip free mechanisum , energy limiting ofclass 3 as per iec, minimum phase termination capacity of35sq.mm. , conductor line load reversibility , ip 20 contact protectionand fitted in existing distribution board/sheets, minimum electricaloperation 20,000 upto 20 a rating and 10,000 upto 63 a, 5000 for 80a & above rating including making connections, testing etc. asrequired. oem shall have submit nabl / cpri / erda accrediatedlab type test reports & all as per pre approved by engineer incharge. for additional technical parameters of product / work referannexure a attached with this bsr single pole mcb (with b/c curve tripping characteristics) 6 a to 32 a rating, providing & fixing of 240/415 v isolator isi marked is:13947-iii/conforming to iec 60947-3, suitable for ac22a utilizationcategory, 4kv impulse withstand voltage, true contact indication,red colour dolly / lever shall have single mould covering ove

Central Government/Public Sector

CTN :41725998

20 Sep, 2025 5.57 Lacs

Dhanbad - Jharkhand

Tender For supply and fitting of safety equipment in six (06) nos. of ece make ocb for compliance of dgms-violation in compressor section of moonidih project, wj area. sl.no. comp no. 2,4,18,11,12,15 - digital earth leakage relay, 30ma-30a, auxiliary supply:110- 240v ac/dc, highly sensitive cbct using nanocrystalline core, id-120mm, electronic motor protection relay (multi protection functions), auxillary contactor/relay, 220v ac, fiber/bakelite board, 6mm (15”x12”), channel connector, led indicator multi voltage, manufacturing and providing of moulded heavy ct with 500/5 a ratio for both protection and metering, manufacturing and providing of pt 550v/220v/110v, push switch with element, kit kat fuse with carrier, make-bussmann/eation, tripping coil 220vac with plunger set, no volt coil, copper wiring wire, ferule, tie & lugs etc., technical charge/labour charge for wiring, armoured cable connection dismantling & fitting, 3 phase voltmeter, size -96mmx96mm, 3 phase digital ampere meter, size -96mmx96mm, buzzer with led indication 220v, painting of switch, testing transformer

CTN :41727143

10 Sep, 2025 NA

Multi City - Multi State

Tender For supply of customize extension board with 3 meter cord with top with the accessories.1)6 amp p/switch-03 nos.2) 6 amp p/socket -3 nos, 3) 16 amp p/switch -01 nos. 4) 16 amp p/socket -01 nos,5) indication lamp - 01 nos,6) mcb 16amp sp c type 10 ka (all switch socket mcb and indicator are anchor or similar make)p/switch and p/socket make- anchor or similar. [ warranty period: 30 months after the date of delivery ]

CTN :41455950

13 Sep, 2025 NA

Panaji - Goa

Tender For corrigendum : supply installation and commissioning of lab. equipment for electrical engg dept - low power factor wattmeter portable electrodynamometer type single phase,0.5/1a62.5/125/250v, wattmeter portable electrodynamometer type single phase, 1/2a, 75/150/300v, wattmeter portable electrodynamometer type single phase, 2.5/5a, 125/250/500v, wattmeterportable electrodynamometer type single phase, 5/10a, 150/300/600v, wattmeter portable electrodynamometer type single phase, 10/20a,150/300/600v, wattmeterportable electrodynamometer type single phase, 15/30a,150/300/600v, power factor meter portable electrodynamometer type single phase, 1/2a, 75/150/300v, power factor meter portable electrodynamometer type single phase, 5/10a, 150/300/600v, digital laboratory trainerbreadboard- solder-less large size, spring loaded breadboard consisting of two terminal strips with 1280 tie points and 4 distribution strips with 100 tie points eachregulated dc power supply - +5v at 1amp, -5v at 500 ma, 3 to +15v at 500ma, and -3 to -15v at 500 mapulse generator : 1 hz to 1 mhz in 6 steps. variable in between steps- amplitude : 3-15v (cmos), 5v (ttl)- duty cycle : 50% ttl/ cmos outputpulsar switches : 2 independent buffered bounce free manual pulser (useful for freezing the action of each stage of the counter after every clock pulse)data switches : 12 nos. independent buffered logic level inputs to select high / low ttl levels, each with a bi-color led to indicate high / low status and termination.logic indicators : 12 nos. independent buffered logic level indicators for high / low status indication with bi-color led for digital outputsseven segment display : 2 nos. bcd to seven segment decoder / driver ic with terminalslogic probe : logic level indicator for ttl/ cmospower : 230 v 10%, 50 hzto be provided : ics-4001/1, 4049/1,4069/1, .7400/1, 7402/1, 7404/1, 7406/1, 7408/2, 7410/2, 7411/3, 7420/2,7432/3, 7474/2,7476/2,7486/1.resistors-330e/1,1k/2, 1k8/1,,15k/1, 47k/1.1m/2, capacitors- 0.01mf/1, 0.1mf/1, 0.22 mf/1,crystal-32.768mhz/1. main cords, operating and experimental manual, red & black patch cords with pin 10 each, red & black patch cord (pin to pin) 10 each. wire 24/25 swg. 1meter each, 5 colour instructiondetailed operating manual along with instructional details. experiment to be conducted01. to verify logic gates operation02. to verify de-morgan s theorem with boolean logic equations03. to perform binary to gray code conversion04. to perform gray code to binary conversion05. performance of binary adder and subtractor06. performance of johnson counter07. performance of of flip-flops rs, jk, d&t08. performance of multiplexer and demultiplexer09. performance of 4 bit binary up and down counter10. performance of shift register (sipo), analog lab trainerbread board: solder-less large size, spring loaded breadboard consisting of two terminal strips with 1280 tie points and 4 distribution strips with 100 tie points each, totaling to 1680 tie points.regulated dc power supply : +5v at 1amp, -5v at 1amp, +12v/0 to 20v at 500ma, and -12 v/0 to -20v at 500 maac supply : 5-0-5v, 10-0-10v at 100ma. can be used as 5v,10v,15v,20v and also as center tapfunction generator : sine / square / triangular waveforms frequency 1 hz to 110 khz in 5 steps. variable in between steps.sine / square / triangular waveform output 50mv ~10vpp variablemodulation generator : sine / square / triangular wave forms frequency 1 hz to 110 khz in 5 steps. variable in between (100khz ) steps. sine / square / triangular waveform output 50mv ~ 10vpp variable with 100 khz modulationdigital meter (3 digit) : dual range dc voltmeter 0-20 v /ammeter 0-200macontinuity tester : for testing the continuity. provided with beeper soundpotentiometers : 3 potentiometers (1k, 100k and 100k) with terminalson board switches : 2 switches single pole double throughpower : 230 v 10%, 50 hzaccessories / components / manual to be provided : resistance 5% 1w 100e/1, w 47e/2,100e/1, 220e/1,

CTN :41689344

26 Sep, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For tender for supply of 25vk1c901 automatic voltage regulator : - automatic voltage regulator - ekm , dc insulation measuring and monitoring system (dcims) , power supply card (ps1) , diode (d1) , controller card with associate wire hardness ( con , controller board (cont-1) , display board (lcd-1) , power supply board (ps) , switch board (swb) , indication lamp (h1) , indication lamp (h2) , dc voltmeter (v1 , v2) , dc ammeter (a1) , hrc fuse (f1) , dc shunt (sh1) , dc-dc converter module , socket (sk1) , plug (pl1) , power supply module (ps1) , cooling fan (fan5-fan6) , cooling fan (fan7-fan9) , capacitor (c1 , c2) , timer (tm) , contactor (k1) , contactor (k2) , inductor (l1) , resistor (r1) , rs 485 comm board (rs485) , o/p lamp , emi emc fitter (fl1) , cooling fan (fan1-fan4) , indication lamp (h1 , h2) , isolation transformers (t1 , t2) , dcims signal conditioning card (scc card) , buzzer (bz1) , lcd module (lcd1) , start push button 4a , 250v green , man machine interface (mmi1) , rs232 to rs485 converter (rs232-485) , control cable (w1) , training charges as per para 1(y) of atc , type testing charges (if any)

Central Government And Public Sector

CTN :41710419

15 Sep, 2025 NA

Bongaigaon - Assam

Tender For supply & fitment materials (as mentioned in annexure) for doing the modification works in 200nos. of eog type lhb-ac coaches for the provision of indication on-board for 4.5kw urebc in sbc for lhb ac coaches as per rdso?s modification sheet no. rdso/pe/ms/ac/0095-2024(rev.0).

Central Government / Public Sector

CTN :41590697

09 Sep, 2025 NA

Vijayawada - Andhra Pradesh

Tender For supply of automatic star delta starter control panel board suitable for 7.5hp pump set made with 19swg crca sheet steel comprising of 1 no. of fully automatic star & delta contractors, suitable capacity of 1 no. of single phasing preventer, motor protection circuit breaker, 50a analog meter, 0- 500volts analog meter, phase indication lamp, selector switch, etc., with suitable wiring with locking arrangements and painting the control panel board with one coat of red-oxide and two coats of gray color paint.make: abb, l&t, c&s, schneider, havells, siemens, bch on

Landmark Board Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government And Public Sector

Central Government / Public Sector