Get complete information related to latest Laptop Charger Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Laptop Charger Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Laptop Charger Tenders.
Tender For supply, erection, testing and commissioning including comprehensive warranty maintenance for 10 years of 11 kw to 50 kw on-grid hybrid solar rooftop power plant with battery backup for captive use (capex mode) in various government buildings at various places in the state of uttar pradesh
Tender For supply of high capacity long range full duplex nlos wireless radio with uhf 50 mbps base radio - high capacity long range full duplex nlos wireless radio with uhf 50 mbps base radio , high capacity long range full duplex nlos wireless uhf 10 mbps p2p p2mp and self repeater , hi gain antenna for 360 degree omni , directional antenna yagi , low loss weather proof cable , fcbc 48 v with battery backup 8 hrs , regulated isolation transformer input 140-300 vac output 230-240vac , coaxial protection device for rf feeder , line protection unit 8 port , chemical earthing dual pit , ethernet surge protection , installation and commissioning
Tender For corrigendum : supply, installation, testing and commissioning of 5 kva online ups with battery backup time of 120 minutes having the following specifications : 1) switching technology: igbt-pwm with inbuilt isolation transformer 2) input power of single phase (160-260v), sinewave,50hz 3) output power of single ph ase 230v + or - 1%, sine wave 50hz 4) degree of protection of ip21 6) smf-vrla batteries confirm to jisc:8702(part.i ii &iii), 7) minimum warranty of 03 years for ups and 02 years for batteries 8) minimum number of batteries- 10 nos. 9) dc bus bar voltage: 120 v, 10) minimum amp hour of battaery: 150 ah 11) min imum guaranteed vah: 1600 x per kva x per hour of back up time. test report from central govt/nabl/ilac accredited lab covering all technical specification to be furnished at the time of supply. make required: hykon, legrand, apc, luminous, numeric, siemens, microtek, and schneider electric only. [ warranty p eriod: 36 months after the date of delivery ]
Tender For supply and installation of miscellaneous items - led notice display board height (min)(mm)-609.6, length(min)(mm)-1920, led pitch (max) (mm)-10, led display board type-single,led colour-red,led type-smd,language-english; regional,unicode support-utf-8,number of display lines]-2,type of displayed infornation-static + scrolling both,viewing angle-horizontal 160 deg or higher & vertical 130 deg or higher,viewing distance (meter)-15,automatic brightness control-yes,led brightness(cd/m2)--4001-5000,pixel pitch (mm)-10,minimum pixel density (dots/meter2)-5000,maintenance-rear,duty cycle-16x 7,life span (hours)-50000,construction-display system,it is consisting of led display board + embedded controller,cabinet-steel/alluminium box duly powder coated,type of installation-outdoor,wi fi connectivity-yes, if yes, type of wi fi connectivity,802.11 b/g/n,usb port-1,gsm connectivity-yes, if yes, cellular data support-4g/lte,input voltage (vac)-110-240,maximum power consumption (watt)-300,weight (kg)-50,on site oem warranty (year)-1, pa- audio sound system with trolly :- system type-1 way,built in uhf receiver-no,number of wireless microphones-2,bluetooth connectivity-avalilable,built in memory (gb)-0,number of channels-1,warranty (years)-1, sanitary napkins vending machine :- type of machine-automatic,operating features-coin operated/free,multiple coins accepted-yes,number of selection options-2,accessibility for free vending utility service-na,type of loading-spiral,maximum storage capacity (nos)(nos)-25-50,material of the outer body-mild steel(ms),built-in charger-no,mode of function-stand alone,operating power source-electronic,battery backup time (hrs)-na,thickness of ss/ms sheet (mm)-1.2,thickness of frp/plastic sheet (mm)-1.2, sanitary napkins incinetator machine with smoke control unit :- stand provided-yes, thickness of thermal insulation material (mm)-40 millimeter, thickness of ms/ss sheet of burning chamber (internal) (mm) (min)-3 millimeter, machine weight(kg)-51-250, thickness of door including insulation (mm)-40 millimeter, flexible emission outlet pipe dia (mm)-76 millimeter, material of housing cabinet (external)-mild steel(crca) sheet, material of burning chamber (internal)-stainless steel sheet of ss-304 grade, material of thermal insulation-high density ceramic board, temperature indicator provided-yes, minimum burning temperature (degree c)-800, burning capacity per day (number of napkins)-1000-1250, burning capacity at a time (number of napkins)-26-50, burning time of full capacity napkins/pads (minutes) (max)-35 minutes, automatic digital controller for time-yes, automatic digital controller for temperature-yes, type of scu (smoke control unit)-top mounted, material of housing of smoke control unit (scu)-mild steel(crca) cabinet, both carbon control and foul odour control chambers for filteration of smoke emission-yes, number of filters in carbon control chamber-one, type of filters in carbon control chamber-ceramic blanket as a filter, number of filters in odour control chamber-one, blower rpm-1800, warranty in years (option of comprehensive warranty is available through bidding only, which if opted will supersede normal warranty in the catalogue)-1, wall mounted automatic fire extinguisher:- extinguishing media-powder based (as per is 4308), expellant medium-n2 based, extinguishing agent of powder based fire extinguisher-abc map90, discharge mechanism-automatic, additional requirement (hint: select na if not applicable)-na, cylinder/vessel material-mild steel, valve material-stainless steel, internal coating-epoxy powder coating, external coating-epoxy polyester powder, powder based fire extinguisher capacity (in kg) (hint: select na if extinguishing media is not powder based)-6,7,8&9, clean agent based fire extinguisher capacity (in kg) (hint: select na if extinguishing media is not clean agent)-na, fitted with heat sensor quartzoid bulbs with sprinkler heads-2, class of fire for which fire extinguisher is
Tender For supply of online ups of rating 5.0kva with battery of backup time 60 minutes as per the specification enclosed. [ warranty period: 60 months after the date of delivery ]
Tender For supply of shunt safe device specification 1. the unit should be an audio visible alarm unit, to be u sed by the shunting staff for their own safety during shunting operations. 2. the unit should be made of at l east 1.2 mm thick ms sheet duly powder epoxy coasted. 3. the visible indication is to be provided with the help of a matrix of blue led?s of 5 mm diameter. the front size matrix should be have 4 rows and 4 column s and the matrices on either side should have 1 column of 4 led?s each. the led?s should be flashing with one second off and one second on times. the side led?s should be located at an angle of 32 to 35 degrees from the front matrix, with the objective is to disperse the light in the front, as well as on the two sides. 4. t he audio alarm should comprise of a loud speaker of such intensity as to be audible from a distance of at le ast 75 meters in a noisy environment. nominal audio power out put of the unit should be 10 watt, which sh ould be provided by the means of the sturdy horn type loud speaker. the horn should be protected with the help of ms bracket of suitable size duly powder coated. the sound to be intermittent to be decided in consu ltation with railways. 5. the unit should be provided with a battery backup of at least 4 to 5 hours. 6. batte r 12v 4.5 ah lithium-ion battery. 7. the unit shall be usable in all weather conditions in open areas. the de sign should be rainwater proof. 8. there should be hook for hanging the device with the coach/wagon. the hook should have a diameter of 2.5 inches and it should be possible to rotate the hook in any direction. hoo k should be strong enough tom sustain the regular used of the unit. 9. rubber lining or any other type of sh ock absorbers should be provided at the bottom and the back side. 10. the unit should be provided with a s uitable and sturdy on off switch, so located that it is not operated accidentally. a jack plug in arrangement should be provided to facilitate the changing of batter with an external charger. 11. the led?s should be pr otected with the help of an acrylic sheet. 12. battery on charge indication should be provided at suitable lo cation. 13. external smps charger to be provided for charging batteries. [ warranty period: 30 months af ter the date of delivery ]
Tender For supply, installation, testing and commissioning including comprehensive warranty maintenance for 5 years of 11 kw to 50 kw on-grid hybrid solar rooftop power plant with battery backup for captive use (capex mode) in various government buildings at various places in the state of uttar pradesh
Tender For corrigendum : supply of installation of it infrastructure for jca - core distribution switch with uplink ports , access switch with 4x 1g sfp uplink , optical transceiver module , compute machine for ad or av or wsus applications , unified threat mangemant device , programming console with i5 processor , 6 kva online ups with 30 min backup , battery bank for 6kva ups , 12 port liu fully loaded , ofc 3 mtr patch cord , 42u network rack , 6u network rack , 2 mtr cat6 patch cord , 305 mtr cat6 utp , io box with face plate and gang box , ic of network equipments