Latest laser imaging system Tenders | Government laser imaging system Tenders

Central Government / Public Sector

CTN :40248116

14 May, 2025 NA

Bhubaneswar - Odisha

Tender For supply & installation of set of items for bio toilet testing lab consist of seven items:- (1) ph meter qty. 01 no. (2) lab equipment for testing cod test consisting one no. (chemical oxygen demand (co d) digester for bio toilet) (3) set of lab equipment for testing focal coli form count test consisting two items (a) auto clave vertical - 01 no. (b) laminar air flow - 01 no. (4) chemicals and reagents for chemical oxyg en demand testing in bio-toilet consisting of 07 items (mercuric sulphate (hgso4), conc. sulphuric acid (h 2so4), potassium dichromate (k2cr2o7), silver sulphate (ag2so4), ferroin indicator solution, ferrous am monium sulphate (nh4)2fe(so4)2.6h2o and chemstone). (5) laboratory reagents & lab ware for fecal c oliform count test in bio- toilet consisting of 04 items (durham tubes neutral glass, autoclavable, centrifu gal tubes, conical bottom, micro lip sterile and hi a-1 broth / medium culture). (6) lab utensils for testing fecal coli form count and cod test consisting eight items (micro tip stand, test tube stand (12 blocks), te st tube stand (40 blocks), plastic basket, beaker, conical tube (made of borosilicate), spirit and digital bur ette). (7) lab accessories for testing fecal coli form count and cod test consisting four items (fixed volum e micro pipettes, autoclavable bottle top dispensers, vortex shaker and incubator). [ warranty period: 30 months after the date of delivery ]

CTN :40228947

26 May, 2025 NA

Ernakulam - Kerala

Tender For tender for supply of fuse 10a 250v , rudder angle indicator , digital gyro repeaters with casing , fuse t 1a 250v , supporting liquid & dist water , bearing sight , 143 021 , supporting liquid , follow up amplifier , bearing repeater compass , terminal strip w temperature sensor , operator unit , power supply pcb , anschutz digital repeater(wall mounting , ip 44) , repeater compass

corporations/Associations/Others

CTN :40229296

26 May, 2025 NA

Luckwada - Chhattisgarh

Tender For supply of automatic burette , glasswares burette pipette volumetric flask measuring cylinder etc , hot air oven digital thermal indicator , glass thermometer incubator , hot plate analog thermal indicator , muffle furnace digital temp controller , analytical digital balances , weight box , loose weight , ph analyzer digital display , de mineralized water unit digital conductivity meter , compressor for icp instrument pressure gauge and switch , argon gas regulators pressure gauge and switch , reactor block digital temperature controller

CTN :40241221

27 May, 2025 NA

Kolkata - West Bengal

Tender For supply of wire type iqi - 13 - iso - 19 - fe, cu, al , duplex wire type image quality indicator , digital lux meters - illuminometer , lpt reference block - 30 and 50 micron , film densitometer

Central Government/Public Sector

CTN :40119697

12 May, 2025 NA

Bhopal - Madhya Pradesh

Tender For corrigendum : supply of e4253002 tpi 01-bp9048106680-digital tap position indicator with dual 4-20ma output, bezel dim. 96 m

CTN :39991725

13 May, 2025 NA

Ratnagiri - Maharashtra

Tender For corrigendum : supply of furazolidine 25mg per 5 ml , syp.pheniramine maleate each 5ml , syp. calcuim with phosphate 200 ml , syp. iron folic acid 50 ml , syp.metronidazole , syp.ondansetron , syp. paracetamol 125 mg , syp.zinc sulphate or gluconate 50 ml , vitamin a concetrated solution 100 ml , hydrogen peroxide 500 ml , surgical spirit , gel diclofenac , absorbant cotton wool 100 gm roll , absorbant cotton wool 500 gm roll , absorbent surgical gauze 50cmx18 m , adhesive plaster 10 cm x 5 mtr , adhesive plaster 7.5 cm x 5 mtr , auto clave indicator tape label size 6 cm x 2.5 cm , bandage cloth 100 cm x 20 mtr , chromic catgut size 1 0 , chromic catgut with needle size 1 , disposable examination gloves , disposable non traumatic razors , disposable sterile cotton swab , disposable syringes 10 ml with needle , disposable syringes 2ml with needle , disposable syringes 5ml with needle , disposable umbilical cord clamp , elastic adhesive bandage roll of 10 cm x 4 mtr , infusion set , plastic apron , pricking lancet , rolled bandages 10 cm x 4 mtr , rolled bandages 7.5 cm x 4 mtr , scalp vein sets no.18, 21, 22, 23, 24 , kit leptospira , rapid pregnancy testing kit , dengue kit , malaria kit , hbsag kit , rpr test kit , n 10 hydochloric acid , acetic acid solution , reagents - benedicts solution , dipsticks for urine test for protein and sugar , dipsticks for urine test for 10 p , whole blood finger prick hiv rapid test , stains field a composition typically contains a combination of dyes eg eosin and methylene blue or romanowsky-type stains , stains field b typically contains a combination of basic and acidic dyes eg a mixture of eosin, methylene blue, and other romanowsky-type stains , anti abd kit , barium chloride , micropipette , yellow tips for micropipette , specimen collection bottles , plastic dropper , digital hemoglobino meter , digital hemoglobino strips , glucometer , glucometer testing strips , pre- sterilewide mouth plastic container with screw cap 20ml with label , pre- sterilewide mouth plastic container with screw cap 100ml plastic container , tourniquet , wooden spatula , slide drying rack , test tubes glass , glass rods , glass slide box of 25 slides , curtain , blood lipid test strip dry chemistry , glycohemoglobin test kit , rapid test for qualitative detection of antibodies to s typhi igm igg , buckets big plastic , bucket small plastic , dustbin blue , red , black , spirit lamp , test tube holding clamp , test tube rack , wash basin with elbow tap , cusco speculam , examination table with lithotomy position arrangement , table top centrifuge , pathological microscope binacular , lamp with stand spot examination light , sponge holding forcep 6inch , beak forcep , edta tube collection bulbs , plain tube collection bulbs , cover slip , biodegradable biomedical waste bag, yellow, colour , biodegradable biomedical waste bag, white colour , biodegradable biomedical waste bag, blue colour , biodegradable biomedical waste bag, red colour , metoprolol tablet (q2) capsule (q2) , clobazam tablets (v2) (q2) tablet (q2) , ondansetron tablet (q2) , pantoprazole injection (q2) injection (q2) , donepezil tablet (q2) , amiodarone tablets (v2) (q2) (q2)

CTN :40218946

13 May, 2025 58.87 Lacs

Tumkur - Karnataka

Tender For procurement of lab equipments for quality control lab of no.29, q.c subdivision tumkur - supply, installation, testing and commissioning laboratory electric oven with digital indicator cum controller with safety alarm, range 50deg to 250 deg c +/-1 deg c with air circulating fan, s.s. inside size 600 x 900 x 450mm item code aim-9109 with all lead and lift complete as per specifications and directions of the engineer-in-charge of work., supply, installation, testing and commissioning of sieve shaker, motorised, with built-in digital timer and 20cm and 30cm dia adaptor suitable for operation on 220v, 50hz, single phase, ac supply with all lead and lift complete as per specifications and directions of the engineer-in-charge of work., supply of mould, steel, for 70.6mm cube-for preparation of mortar and lime cubes, item code aim-414 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning core cutter machine with all accesories including generator with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning digital compression testing machine, capacity 1000kn, range 1000kn, least count 0.1kn, max.clearance between platens 390mm, max.distance between side plates 260mm, platen size 222.0 dia, piston dia 157mm, piston stroke 50mm, item code aim-314e-dg-1 with all lead and lift complete as per directions of the engineer-in-charge of work., supply of sieve brass frame 20cm dia x 90 microns with all lead and lift complete as per directions of the engineer-in-charge of work., supply of heating gloves with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning swell test apparatus as per is2720 (part 16).capacity 5kn, aim-11001-mould 100mm dia x 1276.3mm height (1000ml volume) with base plate and collar, aim-265 - proving ring, 2.5kn capacity, aim-072 dial gauge 25mm travel, 0.01mm least count, aim-13201, item code aim-132 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning centrifuge extractor, capacity 1500g electrically operated. the new design of centrifuge extractor is compact with inbuilt dimmerstat for speed veration from 0 rpm to 3600 rpm. suitable for operation on 220 v, 50 hz, single phase, ac supply. each unit is supplied complete with a set of 25 filter paper discs with all lead and lift complete as per specifications and directions of the engineer-in-charge of work., supply, installation, testing and commissioning thermometer ip 16c range 90c to +370c with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning thermometer ip 15c range 5c to +110c with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning ball valve 4mm item code aim-53302 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning cup 4mm item code aim-53301 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning thermometer, ip 61c item code aim-56111 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning thermometer, ip 60c item code aim-56110 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning ring and ball apparatus. the ring and ball apparatus is a compact user friendly apparatus. it has magnetic stirrer with heating facility and digital display of temperature, the heating can be adjusted through knob in aim 561-1 and can be controlled through the integral pid controlled in aim 561-2. suitable for ope

CTN :40218961

13 May, 2025 31.06 Lacs

Multi City - Karnataka

Tender For procurement of lab equipments for quality control lab of no.2 q c subdivision gorur - supply, installation, testing and commissioning digital thermometer range -50 to 280 deg c , item code aim-9622 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning specific gravity bottle- 50ml, item code mis-401 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning environmental test chamber eco friendly with cooling temperature range-10c to 60c +-1c, humidity-50% to 95% + -4%, double walled, inner chamber ss 304, digital controller cum indicator, size - 610x610x610mm, item codeaim-9878 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning mould, steel, for 70.6mm cube-for preparation of mortar and lime cubes, item code aim-414 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning vibration machine, with built-in digital timer, nabl calibrated - as per is4031, machine is supplied with one cube mould with isi certification mark and poking rod. suitable for operation on 220v, 50hz, single phase, ac supply. item codeaim-418-2 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning core cutter - ref. standard is2720 (part 29) , core cutterof known volume is driven into the soil by a rammer. the core cutter is dug out, trimmed and the soil inside weighed and dried for moisture and density check. the equipment consists of the following replaceable partsrammer, with steel rod item codeaim-161 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning core cutter - ref. standard is2720 (part 29) , core cutterof known volume is driven into the soil by a rammer. the core cutter is dug out, trimmed and the soil inside weighed and dried for moisture and density check. the equipment consists of the following replaceable parts steel dolly, 25mm high and 100mm dia item code aim-161 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning compaction test apparatus, manual light compaction made of mild steel- as per is 2720 (part 7) the construction quality control is essentially to check the density of compacted soil achieved in the field, thereby checking its strength. item code aim-110-ms with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning laboratory electric oven, with digital indicator cum controller with safety alarm, range 50 deg to 250 deg c +/-1 deg c with air circulating fan, s.s. inside size 600 x 900 x 450mm conforming to is 2720 item code aim-9109 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning specific gravity bottle-50ml conforming to is2386 item code mis-401 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning sieves as per is 2720 (part 4) sieve brass frame 20cm dia x 150 microns, item code aim-05322 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning sieves as per is 2720 (part 4) sieve brass frame 20cm dia x 160 microns, item codeaim-05339 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning sieves as per is 2720 (part 4) sieve brass frame 20cm dia x 180 microns, item code aim-05321 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testi

CTN :40218965

13 May, 2025 52.49 Lacs

Multi City - Karnataka

Tender For procurement of lab equipments for quality control lab of no 1 qc subdivision kibbanahalli - supply, instalation, testing and comissioning speedy moisture meter, as per is2720 (part 2), is12175 range 0-25% (gauge div.0.5percent) with digital weighing balance. item code aim-036-1 with all lead and lift complete as per specification and directions of the engineer-in-charge of work., suply, instalation, testing and comissioning laboratory electric oven with digital indicator cum controller with safety alarm, range 50deg to 250 deg c +/-1 deg c item code aim-9109 with all lead and lift complete as per specification and direction of the engineer-in-charge of work., suply, installation, testing and comisioning specific gravity bottle-100ml item code aim-401-1 with all lead and lift complete as per specification and direction of the engineer-in-charge of work., suply, instalation, testing and comissioning specific gravity bottle-50ml item code aim-401 with all lead and lift complete as per specification and direction of the engineer-in-charge of work., suply, instalation, testing and comissioning of sieve shaker, motorised, with built-in digital timer and 20cm and 30cm dia adaptor suitable for operation on 220v, 50hz, single phase, item code aim-054-1 with all lead and lift complete as per specification and direction of the engineer-in-charge of work., suply, installation, testing and comissioning sieves as per is 2720 (part 4) sieve bras frame 20cm dia x 10mm , item code aim-05337 with all lead and lift complete as per directions of the engineer-in-charge of work., suply, installation, testing and comissioning 20cm dia bras frame sieves with all lead and lift complete as per directions of the engineer-in-charge of work., suply, installation, testing and comissioning lechatelier flask - used for the determination of specific gravity of hydraulic cements as specified in is4031-ii, aim-401 with all lead and lift complete as per directions of the engineer-in-charge of work., suply, installation, testing and comissioning digital thermometer range-50 to 280 deg c , aim-9622 with all lead and lift complete as per directions of the engineer-in-charge of work., suply, instalation, testing and comissioning specific gravity bottle-50ml with all lead and lift complete as per specifications and directions of the engineer-in-charge of work., suply, instalation, testing and commissioning environmental test chamber eco friendly with cooling temperature range-10c to 60c +-1c, humidity-50% to 95% + -4%, double walled, inner chamber ss 304, digital controller cum indicator, size - 610x610x610mm, aim-9878 with all lead and lift complete as per directions of the engineer-in-charge of work., suply of mould, steel, for 70.6mm cube-for preparation of mortar and lime cubes, aim-414 with all lead and lift complete as per direction of the engineer-in-charge of work., spply, instalation, testing and comisioning vicat apparatus with isi certification mark is5513 fitted in aluminium box. item code aim-394 with all lead and lift complete as per specifiations and directions of the engineer-in-charge of work., suply, installation, testing and commisioning le-chatelier mould, with isi certification mark is 5514, each (resistance of mould test apparatus). supplied complete with over weight 300g +/- 1 g item code aim-400 with all lead and lift complete as per direction of the engineer-in-charge of work., suply, instalation, testing and commisioning vibration machine, with built-in digital timer, nabl calibrated - as per is4031, machine is supplied with one cube mould with isi certification mark and poking rod. suitable for operation on 220v, 50hz, single phase, ac supply. item code aim-418-2 with all lead and lift complete as per direction of the engineer-in-charge of work., suply of heating glove with all lead and lift complete as per direction of the engineer-in-charge of work., suply, installation, testing and comissioning swell test apparatus as per is2720 (part 16

CTN :40218968

13 May, 2025 53.37 Lacs

Multi City - Karnataka

Tender For procurement of lab equipments for quality control lab of no 3 qc subdivision yediyur - supply, instalation, testing and commisioning core cutter - ref. standard is 2720 (part 29) , core cutter of known volume is driven into the soil by a rammer. the core cutter is dug out, trimmed and the soil inside weighed and dried for moisture and density check. aim-161 with all lead and lift complete as per direction of the engineer-in-charge of work., supply, installation, testing and commissioning sample tray (enamel tray), size 200x150x30mm with all lead and lift complete as per specification and direction of the engineer-in-charge of work., supply, installation, testing and commisioning sample tray (enamel tray), size 300x250x40mm with all lead and lift complete as per specification and direction of the engineer-in-charge of work., suply, installation, testing and commisioning sample tray (enamel tray), size 450x300x40mm with all lead and lift complete as per specification and direction of the engineer-in-charge of work., supply, instalation, testing and commisioning sample tray (enamel tray), size 600x450x50mm with all lead and lift complete as per specification and direction of the engineer-in-charge of work., suply of sample tray (enamel tray), size 50x500x50mm with all lead and lift complete as per specification and direction of the engineer-in-charge of work., supply, instalation, testing and commissioning compaction test apparatus, manual light compaction made of mild steel-as per is 2720 (part 7) the construction quality control is essentially to check the density of compacted soil achieved in the field, there by checking its strength. aim-110-ms with all lead and lift complete as per specification and direction of the engineer-in-charge of work., supply, instalation, testing and comissioning speedy moisture meter, as per is2720 (part 2), is12175 range 0-25% (gauge div.0.5percent) with digital weighing balance. calcium carbide reagent, moisture gauge, 0-25% x 0.5%, digital balance, 50g, steel balls, 12.7mm dia and 25mm dia, scoop, cleaning brush, aluminum dish. item code aim-036-1 with all lead and lift complete as per specification and directions of the engineer-in-charge of work., suply, instalation, testing and comissioning micro oven with all lead and lift complete as per specification and direction of the engineer-in-charge of work., suply, instalation, testing and comissioning laboratory electric oven with digital indicator cum controller with safety alarm, range 50deg to 250 deg c +/-1 deg c with air circulating fan, s.s. inside size 600 x 900 x 450mm item code aim-9109 with all lead and lift complete as per specification and direction of the engineer-in-charge of work., supply, installation, testing and comisioning specific gravity bottle-100ml item code aim-401-1 with all lead and lift complete as per specification and direction of the engineer-in-charge of work., suply, installation, testing and comissioning specific gravity bottle-50ml item code aim-401 with all lead and lift complete as per specification and directions of the engineer-in-charge of work., suply, installation, testing and commissioning of sieve shaker, motorised, with built-in digital timer and 20cm and 30cm dia adaptor suitable for operation on 220v, 50hz, single phase, ac supply item code aim-054-1 with all lead and lift complete as per specification and direction of the engineer-in-charge of work., suply, installation, testing and comissioning sieves as per is 2720 (part 4) sieve brass frame 20cm dia x 1.6mm, item codeaim-05338 with all lead and lift complete as per directions of the engineer-in-charge of work., suply, installation, testing and comissioning sieves as per is 2720 (part 4) sieve brass frame 20cm dia x 1.70mm, item codeaim-05308 with all lead and lift complete as per directions of the engineer-in-charge of work., suply, installation, testing and comissioning sieves as per is 2720 (part 4) sieve brass frame 20cm dia x 2.00mm , item cod

Laser Imaging System Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

corporations/Associations/Others

Central Government/Public Sector