Latest laser target Tenders | Government laser target Tenders

CTN :41535680

12 Sep, 2025 NA

Vadodara - Gujarat

Tender For supply of laboratory equipment--, computer controlled servo hydraulic testing compression machine (capacity-3000kn) with flexure frame 500 kn capacity suitable for testing 3 mtr. beam testing (controlling in load/stress, displacement and strain control), mortar needle penetrometer, jolting apparatus with accessories, " hydraulic shrinkage determination ", rcc wall core cutting machine, cement mortar mixer, vibrating hammer for concrete mould u shape box apparatus, "l-box apparatus ", "fill box apparatuskajima test ", wheel borrow (deep), cement mortar mould-70.6 x 70.6 x 70.6, cement mortar mould-50 x 50x 50, cement mortar mould-100 x 100x 100, plastic curing tank for concrete moulds, accelerated curing tank (48 cubes), laboratory cement autoclave, muffle furnace, hand gloves for oven, all in one computer system with printer

CTN :41503612

30 Aug, 2025 NA

Gurdaspur - Punjab

Tender For supply of particle board 12mm , round up chemical for grass remover or cleaning , rubber packing for fixing glass alm door , sand course , sand fine , screw wood 25 by 6 200 per pkt , screw wood 35 by 8 200 per pkt , spun yarn for pipes , ss curtain rod 20mm dia 3.6m long as per specs docs , stainless steel peg set of six 450 x 38 x 3 mm in size , star screw 25 by 6 200 per pkt , steel hexa blade of size 1 inch pack of 20 nos , synthetic enamel smoke grey paintas per specs docs , synthetic enamel white paint make asian or burger orshalimar , syphon assy for geyser 25 ltrs 6 holes as per sample , tank nipple 25mm dia , teflon tape for plumber as per sample , thinner for synthetic enamel paint , vitrious china ewc s or p trap pedastal pattern as per specs docs , wall care putty make j k cement , white cement 5 kg packing , white cement based self curing mortar levelmax 25 kg pack jk cement , wpc self printed sheet 8 feet x 4feet x 18 mmas per specs docs , auto hinges set of 2 as per sample , ms clamp with 50 x 5 mm flat iron for 75mm bore pvc pipe , pre laminated gypsum ceiling board tile as per specs docs , pvc plain sheet 8 feet x 4feet x 18 mmas per specs docs , pvc plain sheet 8 feet x 4feet x 5 mm as per specs docs , pvc self printed sheet 8 feet x4 feet x 5 mmas per specs docs , pvc bend 75mm bore as per sample finolax supreme , pvc flush pipe 32mm dia as per sample , pvc laminated sheet 10 feetx 8 feet x 5 mm as per specs docs , pvc long bend 32mm bore for wc , pvc pipe single socketed 75mm bore as per specs docs , pvc self printed sheet 8 feet x4 feet x18 mm as per specs docs , pvc short bend 32mm , pvc socket for 110mm bore pipe , pvc socket for 75mm bore pipe , pvc syphon washer for cistern , pvc tee 75mm bore as per sample , brackets for stainless steel curtain rod , butt hinges steel 100 mm make crown , cane plastic 2mm , cane plastic 4mm , cement 43 grade opc 50 kgs in bag make ambuja or acc , ci grating 150 mm , ci stop cock 20 mm make hindustan , cloth baze green 48 inch width , cp cup 15mm dia , cp long bend 32mm , door seal 2 point 5 feet long make beeta , door seal 3 feet long make beeta , door seal 4 feet long make beeta , end caps for stainless steel curtain rod , fevicol make pidilite for mixing of distemper , fevicol sh for wooden furniture , figured glass of size 4 feet x 4 feet x 3 mm make modiguard , foam cushion size of 550 x 530 x 100mm make kurlon or sleepwell , gland dori 10 mm , gland dori 14 mm , helical door spring 150mm make crown , knob 20mm , lakh dana red , lead ring 100 mm , lead ring 80 mm , leather buffalo , machine screw full thread as per specs docs , malmal cloth , ms brackets for kitchen sink , ms brackets for whb , ms nails 75mm , m seal 100gm pack , nut and bolt 80mm long 10mm thick , nut and bolt 80mm long 12mm thick , nylon newar 50 or 55mm dia in white colour make usha , paint synthetic enamel or olive green , patch mate road repair 50kg bag , plain head lost ms nails 100mm , plain head lost ms nails 25mm , plain head lost ms nails 40mm , plain head lost ms nails 63mm , plain sheet glass 3mm thick size 1 point 2m x1 point 2m , plain sheet glass 5mm thick 1 point 2m x1 point 2m , plastic laminated sheet 8 feet x 4 feetx 12mm thick teak face , plastic laminated sheet 8 feet x 4 feet x 1mm white face , plastic laminated sheet 8 feet x 4 feet x 5mm white face , ply wood 8 feet x 4 feet x 4mm as per specs docs , plywood 8 feet x 4 feet x18mm bwr, make century or kitply , rubber flange 150mm bore , safety chain for door with locking system make alpha , shellac best quality gde i , sluice valve 150 mm make bvi , //bid details 2 / 107 stainless steel curtain rod 1 point 2m long , super mat oxide tarfelt bitumen size 10mtr make iwl , tank nipple with double check nut 15mm dia x 75mm length , tank nipple with double check nut 20mm dia x75mm length , touch wood wooden polishing , turpine oil , varnish gs make asian shalimar , welding rod of size 1 point 4mm in one as per specs docs , wooden b

Central Government/Public Sector

CTN :41485218

04 Sep, 2025 NA

Multi City - Telangana

Tender For ank of baroda, zonal office, hyderabad invites proposals/offers in two bid system from landlords/ builders/ developers having clear and marketable titles over land and built-up property, having carpet area of 1000-1330 sq ft for acquiring premises for opening of new brick and mortar branches

Central Government/Public Sector

CTN :41485219

04 Sep, 2025 NA

Ranga Reddy-T - Telangana

Tender For ank of baroda, zonal office, hyderabad invites proposals/offers in two bid system from landlords/ builders/ developers having clear and marketable titles over land and built-up property, having carpet area of 1800-2230 sq ft for acquiring premises for opening of new brick and mortar branches

Central Government/Public Sector

CTN :41485220

04 Sep, 2025 NA

Hyderabad - Telangana

Tender For bank of baroda, zonal office, hyderabad invites proposals/offers in two bid system from landlords/ builders/ developers having clear and marketable titles over land and built-up property, having carpet area as tabulated below for acquiring premises for opening of new brick and mortar branches

State Government

CTN :41333626

29 Aug, 2025 2.18 Crore

Udaipur - Rajasthan

Tender For corrigendum : purchase of various testing major apparatus (lab equipment) in quality control labs under zone ajmer, bikaner,udaipur-i and udaipur-ii - fully automatic servo controlled compression testing machine (ctm)-3000 kn capacity with additional load frame of 500 kn capacity & flexure frame of 100 kn capacity:- supplying, fixing and commissioning of fully automatic servo controlled compression testing machine (ctm) of 3000 kn capacity which should be capable of conducting compression test on concrete & mortar specimens and allied products as per is : 516 & is :4031 (part-6). the machine should be power operated with servo controlled motor capable to apply the load continuous by without shock and there shall be large enough space provided for test specimen to accommodate in a readable position. machine shall have good load control and capable of applying the load at the specified rate, uniformly with automatic control with percentage of error for load shall not exceed + 1.0% of the indicated load. the system shall have an arrangement for automatic placing system, which achieved by the combination of advance hydraulic and electronic system. the systems can be loaded in load, displacement or strain control basis. complete machine unit shall conform to is: 14858-2000 and is: 9399-1979 and as per direction of engineer in charge. the salient features and technical specification of the machine shall be as under :- i) ctm-3000 kn machine loading frame - four column high stiffness welded from with enough stabiility . - heavy duty mechanical platens with spherical seated block (vicker hardness > 550), bottom bearing, blocks, auxiliary plates (vh > 550) shall have flatness tolerance within 0.03 mm and squareness and parallelism tolerance within 0.06 mm wide.- base shall have fine finished servo controlled hydraulic cylinder with hardened and finest abraded piston. - frame with safety guard door and transparent fragment guard (both front & rear) (ii) hydraulic pumping system, it should be compact in design and suitable for the supply of required flow and pressure for the movement of the actuactor. it shall have oil tank of adequate capcity vane type pump powered by three phase motor. anti vibration mounting shall provided as standard along with the hps.iii) micro-processed (plc & hmi) based touch panel display & control system user friendly interface control system with application software shall provide the digital servo control, precise operation, ramp generation for the machine, data acquisition, storage, processing, analyzing and reporting etc for the continuous operation of the system.iv) technical specification of ctm (3000 kn) capacity -3000 kn, platen size 320 mm dia, ram dia 260 mm, ram travel 50 mm, vertical daylight clearance 350 mm, horizontal daylight clearance 370 mm, least count - 0.1 kn, pace rate controlling -1%, rate of loading 1.3 mm/min (when running idle), 0.14 to 032 mpa/sec (with specimen), motor capacity 3 hp (min), power supply (240v, 50-60hg, three phase.), capacity of oil tank 20 litre, max. operating pressure 210- 600 bars, flow of pump 2 & 4 lpm (duel speed) , auto stop & release of pressure when specimen failure, multi operation compression test up to 3000kn, up to 500 kn range and flexure test, accessories spacers- 4nos, controller unit auto pid operation with closed loop update rate of 10 khz to control pace rate automatically as programmed. start, stop & hold test system, load control 01kn/sec to 50 kn/sec., displacement control 0.01 mm/sec to 1mm/sec. load indication & control coloured touch screen display of suitable size, test report facility to print test report, export data to ms excel. auto internal calibration without proving ring, short circling protection overload safety cut off, piston over travel safety cut off- shall be made in addition to 3 kva 3 ph servo control stabilizer, technical specification of ctm (500 kn) load frame- capacity 500 kn, platen

CTN :40940020

25 Aug, 2025 NA

Dehradun - Uttarakhand

Tender For corrigendum : development of gimbaled laser target designator

Central Government And Public Sector

CTN :41291127

22 Aug, 2025 18.28 Lacs

Bellary - Karnataka

Tender For labour charges for removing the veneering wall etc. , after proper documentation bringing them down at a height of 2.50 mtr , stocking for reuse , erecting and removing of supports at down properly , etc. , complete , labour charges for removal of core filling in between stone masonry veneer wall and stacking the useful materials and conveyance of debris to a far away from the monument premises , etc.complete , labour charges for excavation/scientific clearance of earth deposit to retrieve fallen architectural stone elements and to expose the buried plinth and original floor & drainage system , including stacking useful stones and disposing of the excavated earth after proper screening outside the temple complex , etc.complete , labour charges for resetting the old available veneer stone and new stone in original position in lime mortar 1into2 ratio including necessary pointing the stone joints in same mortar with suitable colour oxides , curing , as per the standard specifications and as directed etc. complete (materials supplied by the department) , labour charges for construction of brick work for corefilling and in the edges with country bricks specially made as per requirement in lime mortar 1into2 ratio , curing etc. , complete (materials supplied by the department) , labour charges for providing apron and pathwaty using new stone flooring slabs of size 1.20m to 0.90m in length , 0.60m to 0.45m in breadth and 3 inch to 4inch thick properly dressing as per the old available clues setting in lime mortar 1into1.5 ratio above the foundation concerete and pointing the stone joints with lime mortar 1into2 ratio , curing etc.complete (materials supplied by the department) , labour charges for supplying and making of new veneer stone with good quality of new stones properly dressing all sides and architectural designs as per the available clues in the place of damaged and missing members(materials supplied by the department) , disposal of waste and unserviceable materials outsidetemplepremises , stacking the stone members and leveling the undulated area , etc.complete. 1.disposalofbuilding rubbish/malba/similar unserviceable , dismantled or waste materials-100 cum 2.removal and stacking of store members-75 cum 3.or leveling the area-creation of parking space approximately size of 80m x 6m x 0.50m-240 cum

Laser Target Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government And Public Sector