Laser Tracker System Tenders

Get complete information related to latest Laser Tracker System Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Laser Tracker System Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Laser Tracker System Tenders .

Filter

Loading....

Get Tender in Email

CTN :36270119

28 Jun, 2024 NA

Nagpur - Maharashtra

Tender For nit of procurement for supply of non-consumable items for ivf lab for obstetrics and gynaecology department - syms iii sealer for cbs high security straws and tubes. the syms iii sealer is a benchtop thermal sealer unit that is e used under a laminar flow hood to weld cbs high security straws, high security tubes, and hsv high security vitrification straws. it uses an automatic detection system (it uses pre- set specific combinations of seal temperature, time and jaw position for each cbs device). the syms iii sealer is designed to heat seal cbs high security 0.3 ml, 0.5 ml and cbs high security vitrification straws, and the cbs high security tube, for optimal cryopreservation of biological samples. color touch screen should be compatible with the use of laboratory gloves should display machine cycle display: pre-heating, ready status and sealing in progress should have two sealing modes: automatic detection or operator-controlled via the touch screen should display fault signal with messages and alarms should be able to display and tracking of maintenance modes should be easy to clean and service. dimensions (l x w x h): 335 x 250 x 105 mm with 5 years warranty., hsv straw cutter opening device for hsv vitrification straws hold the straw partly immersed in liquid nitrogen and gently remove the top of the outer straw using the straw cutter, with no risk of damaging the inner straw. with the top of the outer straw cut, the inner straw can be removed and placed in the warming solution immediately. 9.5 in h x 4.5 in w x 2.5 in d, portable label printer portable benchtop printer. the entire label should be visible on the display. the printer should be easily used as a stand-alone printer. use for barcode labeling 9.5 in h x 4.5 in w x 2.5 in d display type: monocolor lcd screen keyboard type: abc, cyrillic memory: 16 mb (2 mb available for storage, stores 12 labels) mode of operation: stand- alone mode device connectivity: stand- alone number of printers in kit: 1 number of symbols :104 auto shut off: 10 minutes recharge time: 2.5 hours barcode capability: barcode capable color printing capability: single color font sizes: 6-40 pt maximum print speed: 0.4/s print resolution: 203 dpi print technology: thermal transfer catridge printer series: m21 series (m21-) label material types: heat- shrink polyolefin, nylon cloth, paper, polyester, polypropylene, self- laminating polyester, self- laminating vinyl, vinyl should include: 1) printer 2) nylon cloth patch panel 3) wire and cable labels 4) quick start guide, liquid nitrogen transportation trolly this trolley should be made of mild steel, should have a capacity of more than 30 liters, and can carry up to 150 kilograms. its used to handle cryogenic containers and has a color coated finish., denudation and handling pipettes micropipettes designed for manipulation and transfer of oocytes and embryos during ivf procedures. non-breakable plastic tips that will not scratch the dishes should be compatible with all pipettors. should have medical grade plastic tip fitted with a flexible bulb for a reliable seal and simpler set-up. should have an autoclavable squeeze handle which is designed to offer ease of handling and a comfortable working position. single-use denudation and handling system has been developed for exacting laboratory sterility standards minimising any risk of cross contamination. are designed for manipulation and transfer of oocytes and embryos during ivf procedures. features. precise - adjustable aspiration volumes., partical count and voc meter this product gives information about the air quality present in the ivf lab. usage: measuring and control voc level in the room theory: measure and control iaq level with relay output output: relay out to control a ventilator or air-purifier brand: voc monitor and controller voltage-supply: 230v ac operating temperature: - 20 c~60 c (-4 f~140 f) mounting type: wall-mounting (optional) resolution (bits): 0.1ppm measuring range: 0~30p

Central Government/Public Sector

CTN :36260005

10 Jun, 2024 NA

Multi City - Multi State

Tender For supply of vibration and temperature sensor, mod bus slave device via rs-485, 150 mm (6 in) cable with a 5-pin m12 male quick disconnect (qd), 2.09 m (6.9 ft.) m12 pigtail qd, supply voltage 3.6 v dc to 5.5 v dc, al uminum housing ip:67 measuring range: detects dual-axis (x-axis and z-axis) vibration 0 to 46 mm/sec or 0 t o 1.8 in/sec rms frequency range: 10 hz to 4 khz accuracy: plus minus 10% at 25 degree c sampling frequ ency: 20 khz (default) temperature sensor measuring range: minus 40 degree c to +105 degree c (minus 40 d egree f to +221 degree f) [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :36255333

07 Jun, 2024 NA

Bhopal - Madhya Pradesh

Tender For wheel diameter gauge model wd-2 (e) with digital display for measurement of wheel diameter in b oth mounted (in situ) and un mounted wheels of locos carriage and wagons. the gauge gives direct diameter rea dings on digital display with working manual. specification:- measuring range:- 650 to 1250 mm accuracy: +/- 0.2 mm applicability:- b g wheels resolutions:- 0.1 mm/0.01 mm /0.001 mm (selectable) measurement at distance of edge:- 63.5 mm distance between axes of ball base:- 250+/-0.5 mm display:- wireless display on android 7 se gment led/lcd power supply:- inbuilt rechargeable battery operating temperature: -10 degree celsius to 60 deg ree celsius operating humidity:- 15-85% (no condensation) storage of data:- wireless data transmission with unli mited data storage measurement scheme:- 3 point measurement of curve using linear encoder carrying case:- p added ruggedized pvc carrying case functionability:- measurement of wheel diameter is possible for loose whe el set as well as without dismantling wheel set from wagon , carriage or locos. recording of readings:- optional f acility on android/device data transfer:- through wireless bluetooth weight:- approx 750 gms make: pie/jyothi/ ganapathi/electronica or equivalent [ warranty period: 30 months after the date of delivery ]

CTN :36177991

30 May, 2024 NA

Netanar - Chhattisgarh

Tender For corrigendum : supply of spares for siemens make mv drives of sms of nmdc steel limited - bimetal switch for anticondensation part no 6sl39956lx800aa0 , midpoint diode power card part no 6sl39120ep412aa0 , fiber optic cable set part no 6sl39166sx040aa0 , precharging transformer part no 6sl39146ux010aa0 , sinamics operator panel part no 6sl30550aa004ca5 , terminal module part no 6sl30550aa003la0 , cliq cable part no 6sl30604af100aa0 , voltage sensing module part no 6sl30530aa003aa1 , sinamics control unit part no 6sl30401ma000aa0 , sinamics terminal module part no 6sl30550aa003aa1 , sinamics terminal module part no 6sl30550aa003fa0 , temperature sensor pt100 part no 6sc84736aa000aa0 , sinamics drivecliq cable part no 6sl30604aj200aa0 , filter mats part no 6sl39166sx020aa0 , filter mats part no 6sl39166sx030aa0 , measuring insturment electr part no 6sl39986sc000aa0 , filter mats part no 6sl39166sx010aa0 , crowbar resistor part no 6sl39846px230aa0 , measuring instrument electr part no 6sl39986sc010aa0 , coupling device for insulation monitor part no 6sl39856px310aa0 , avt combination part no 6sl39956lx000aa0 , thyristor part no 6sl39585tx040aa0 , surge arrester part no 6sl39446px010aa0 , diagnostics module part no 6sl39956ac000aa0 , surge arrester valvems part no 6sl39446px000aa0 , lifting solenoid part no 6sl39986px000aa0 , power supply unit part no 6sl39855hx010aa0 , emc filter auxiliary part no 6sl39856hc010aa0 , wire resistor part no 6sb20731ch000aa0 , isolating transformer part no 6sl39156ux010aa0 , rectifier diode power card part no 6sl39120bp428ca0 , power stack adapter part no 6sl39956ax000ba0 , rectifier diode power card part no 6sl39120bp428aa0 , rectifier. diode power card part no 6sl39120bp428ba0 , compact flash card part no 6sl38535eg000aa0 , diode module part no 6sl39846dx100aa0 , isolating transformer part no 6sl39156ux000aa0 , axial fan for control filter part no 9ld90000af030aa0 , fan power unit part no 6sl39140fx030aa0 , dc link capacitor part no 6sl39146kp000aa0

CTN :36109955

24 May, 2024 NA

Lucknow - Uttar Pradesh

Tender For invitation of e-bid for rate contract of "veterinary equipments/ machineries & instruments etc for a.i., surgical, pathological, laboratory & hospital use " for department of animal husbandry, up government of uttar pradesh for financial year 2022-23 - a.i. kit - artificial insemination gun universal autolocking type with container 02 pcs, insulated cover for keeping a.i. gun warmer at required temp-2 , a.i. sheath universal 2000pc, clinical thermometer dual scaleflat body-1pcs, long stem thermometer 0-50 0 c in plastic case 1 pcs., a.i. sheath container plastic with one end closed and other with screw cap for 50 sheath 2pcs, straw cutter for cutting straw uniform 2 pcs, thawing kidney tray 12 ss 1 pcs, straw tweezer minimum 8 straw grooved edges for holding the without crushing made up of ss 1pcs, straw tweezer minimum 8 straw grooved edges for holding the without crushing made up of ss 1 pcs, a.i. apron washable with cotton bidding stitched on all corner it should provided with neck and waist ties with one pocket on front 1 pcs, a.i. disposable gloves 100 pcs in a pkt 1 pkt, hand gel with moisturiser containing ethanol and tricllosan 50 ml.- 1 pcs , disposable boot cover ldpe made with elastic 100 pair , long forceps for holding /lifting the material 450 mm. -1 pcs , dipstick for measuring the level of nitrogen 0-100 folding b type in a sutiable cover 1 pcs , wide mouth flask ss inside an outside 500 ml. capacity screw cap - 1 pcs , dial thermometer 0-110oc steel make -1 pcs , instant accurate unbreakable thaw monitor 35-37oc with different colour indication-01 pcs, autoclavable unbreakable reusable plastic syringe made of p.p. material facility for leur mount needle individually packed. 5 ml, should bear autoclaving at 121 c for 30 minutes without changing its shape., autoclavable unbreakable reusable plastic syringe made of p.p. material facility for leur mount needle individually packed. 10 ml, should bear autoclaving at 121 c for 30 minutes without changing its shape., a.i. gun universal technical specification for universal a.i. gun for bovine for 0.25ml and 0.5ml straws type: universal for a.i. gun for mini and medium straws comptibility : suitable for 0.25ml straw for split and unsplit sheaths iso certifications : manufactured under iso 9001:2000 standerds length of gun : total length of gun 444-447 mm, length of gun without mandairn/ stylet 436-437mm diameter : internal = 3.18 mm external = 3.62 to 3.65mm composition of gun, adherence : stainless type 304h with 0.04 to 0.08% carbon physical quality : rust proof, even after sterlization at high temperature, automatic vaccinator bottle and vial attachment, pressure dose adjustment from 0.5ml to 5ml, luer lock needle nozzle with spare service kit., calf pullerss 316/304. the main body of the device should be attached to the front end by a hinge to ensure convenient up and down movement with operational length 1200mm approx. main body dimension 30x30mm, front end of device u shaped and detachable from body. coparsises a circular tube with a diameter of 25mm, fexbility provision of the device should be 275mm to 400mm approx. the device should have a provision to connect with an obstetric chain. seperate detachable handle of 200mm with twin lock mechanism. ce approved, california mastitis test kit complete kit made of polypropylene with 4 mixing chambers and full grip handle including reagent, reagent dispenser and test colour standard chart, cattle crush tubular, made of g.i. pipe with outside diameter 60mm, height of front & back pillar 1980 mm, length & breadth of cattle crush be 1830 x 877 mm respectively. all four pillars should be provided holes at 75mm distance from bottom and be provided with round bars of 12mm diameter & 300 mm long, side pillars be joined by 2 tubular beams having 60 mm outside diameter, the insided distance between the two beams being 477 mm. the two sides of beams should be supported by two g.i. pipers of 48 mm diameter. low

Loading, Please wait...

Laser Tracker System Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector