Latest lateral pipe Tenders | Government lateral pipe Tenders

Central Government/Public Sector

CTN :40726579

07 Jul, 2025 NA

Mysore - Karnataka

Tender For supply of diesel operated de-watering pump 8.5 hp . specifications: engine capacity 8.5 horsepower, starting : hand start with ignition start, net positive suction head (npsh): 100 meter minimum, minimum s ubmerge: 25 meter, suction and delivery pipe ,dimensions ( 50mm x 50mm) and (50mm x 50mm), 12 v st arting system complete with starter motor charging alternator and cutout, type of pump: back pull out, ca pacity, rate of flow (cubic meter/hr): 50, speed in rpm (rpm): 3000, fuel tank capacity: 15 liters or above , mounted on four wheeled trolley with towing bar. note: availability of type test report for conformity is a s is: 10,001 latest/is 11170 latest/is: 7347 latest for engines, to is:11501 latest and is:9137 latest for pum ps and other parameters to specification from any ilac/nabl accredited/central govt lab. make: kirloskar/ honda/atlas copco /crompton/ rexroth pumps [ warranty period: 12 months after the date of delivery ]

State Government

CTN :40698938

03 Jul, 2025 4.53 Lacs

Korba - Chhattisgarh

Tender For work contract for anticorrosive glass flake epoxy coating on circulating water pump (cw pump) & raw water pump spares i.e suction casing, discharge casing, impeller liner casing, column pipe elements etc. of 2x250 mw, dspm, tps korba (east)

Central Government/Public Sector

CTN :40717439

05 Jul, 2025 19.07 Lacs

Ganjam - Odisha

Tender For supply of hdpe pipes and hdpe suction piece or short piece - hdpe pipe as per is - 4984-1995, 381 mm id, 450 mm od, 3000 mm long with long neck pipe end and gi slip on flange 20 mm thick at both ends as per is - 2062 as per technical specification , hdpe pipe as per is - 4984-1995, 381 mm id, 450 mm od, 1320 mm long with long neck pipe end and gi slip on flange 20 mm thick at both ends as per is - 2062 as per technical specification , hdpe suction piece for smp scavanging pump, 225 mm od hdpe fabricated 90 deg bend, pe 80 pn 6 welded with hdpe stub end and gi slip on flange at one end as per drg no. op-04-m-362 , hdpe suction piece for output bin for smp, 180 mm od hdpe fabricated 90 deg bend, pe 80 pn 6 welded with hdpe stub end and gi slip on flange at one end as per drg no. op-04- m-363, item sl. no. 1 , hdpe suction piece for output bin for smp, 180 mm od hdpe fabricated 90 deg bend, pe 80 pn 6 welded with hdpe stub end and gi slip on flange at one end as per drg no. op-04-m-363, item sl. no. 2 , hdpe suction piece for output bin for smp, 180 mm od hdpe fabricated 90 deg bend, pe 80 pn 6 welded with hdpe stub end and gi slip on flange at one end as per drg no. op-04-m-363, item sl. no. 3 , hdpe suction piece for tails pump for smp, 225 mm od hdpe fabricated 90 deg bend, pe 80 pn 6 welded with hdpe stub end and gi slip on flange at one end as per drg no. op-04-m-364, item no. 1 , hdpe suction piece for tails pump for smp, 225 x 180 mm od hdpe fabricated unequal tee, pe 80 pn 6 welded with hdpe stub as per technical specification , hdpe short piece for tails pump for smp, 225 mm od, 590 mm long hdpe fabricated pe 80 pn 6 welded with hdpe stub end and gi slip on flange at both ends as per drg no. op-04-m-364, item no. 3 , hdpe suction piece for tails pump for smp, 180 mm od hdpe fabricated 90 deg bend, pe 80 pn 6 welded with hdpe stub end and gi slip on flange at both ends as per drg no. op-04-m-364, item no. 4 , hdpe suction piece for secondary rougher for smp, 280 mm od hdpe fabricated pe 80 pn 6 as per drg no. op-04-m-627, item no. 1 , hdpe short piece for secondary rougher for smp, 280 mm od, 290 mm long hdpe fabricated pe 80 pn 6 welded with hdpe stub end and gi slip on flange at both ends as per drg no- op-04-m-627, item no - 2

Corporations And Associations And Others

CTN :40718530

23 Jun, 2025 17.08 Lacs

Delhi - Delhi

Tender For repairing and procurement of various accessories i.e control panel ,cables and delivery/suction pipe for existing sewage/dewatering submersible pump sets and diesel engine pump sets for eandm department under rohini zone

CTN :40717055

05 Jul, 2025 NA

Lucknow - Uttar Pradesh

Tender For supply of water pump assy , reverse light switch , ac turbo pipe , discharge pipe , assy suction pipe , tube suction

CTN :40726037

28 Jul, 2025 NA

Rourkela - Odisha

Tender For supply of submersible dewatering pump set, pump type: self priming motor coupled pump, , motor ty pe: ac motor, single, phase , 230 v ? 10%, 50hz, motor rating :1.8 kw, class of insulation: f class (motor co upled only), degree of protection: ip 55, speed in rpm: 2760, size (dia) of solids in liquid to be handled: 40 millimeter, suction pipe size (nominal): 40 millimeter, delivery pipe size (nominal):63 millimeter, pump sh aft: stainless steel, impeller material bronze, discharge capacity in litres/second (lps): 11, total head: 12 meter, impeller diameter: 40 millimeter, impeller key: yes, impeller nut: yes, mechanical seal, rotating ele ment: yes, mechanical seal, stationary element: yes, non return valve housing: yes, warranty period: 2 ye ar, accepted make/brand: kirloskar, crompton or similar. [ warranty period: 24 months after the date of delivery ]

CTN :40725684

23 Jun, 2025 5.47 Lacs

Kajora - West Bengal

Tender For making of delivery range casing for submersible pumps, removal of the old delivery range casing, fitting of submersible pump motor pipe complete set, ht turbine pump maintenance, delivery pipeline repairing in highwalls, suction, delivery pipeline work at turbine pumps of jambad ocp.

CTN :40709837

23 Jun, 2025 5.47 Lacs

Kajora - West Bengal

Tender For making of delivery range casing for submersible pumps, removal of the old delivery range casing, fitting of submersible pump motor pipe complete set, ht turbine pump maintenance, delivery pipeline repairing in highwalls, suction, delivery pipeline wo

CTN :40684709

04 Jul, 2025 NA

South Andaman - Andaman And Nicobar Islands

Tender For supply of spares for 11 mtr works boat for three boats of fdn 1 e e - rubber mat , drain pipe , fire hydrant coupling , lifebuoy stand screw , bollard base plate , canvas cover , lifeline ring , pumping out arrangement , rubber coaming hatches , wiper system , anchor chain cable , life buoy , drainage stainer , boat hook , manual pumping out arrangement , mcb 32 amps , fuse 10 amps , battery switch , togle switch , dc volymeter , dc ameter 24 v dc led , dc led for indication , wipermotor toggle , nv light red , nv light green , nav light white , nav light anchor , deck light , search light , switch and socket , solar charge controller , boat battery , mini wall mounted fan , horn 24 dc , portable charger , cabib light , shaft gland packing , fuel supply anf return hose , shaft coupling , engine room light , engine vent blower , wiper blades , fuse case , fuse hrc , gasket pump , foot mounting , seat , impeller , sensor , switch of pressure , filter assy fuel , solenoid stop , gasket nozzle , washer seat , seal water pump impeller , shaft aft bearing , rubber bearing set , sea chest valve , non return valve , breather hose , duel fuel suction filter , swivel type shackle , d shackle , ss cabin handholds , canopy cloth , pneumatic rubber fender , cabin light , ss propeller , packing charges , transport charges

CTN :40703337

04 Jul, 2025 NA

Pune - Maharashtra

Tender For supply of and clamping screw and rawel plug 5 mm , fly proof wire mesh steel wire dia 24 swg 15 m long 4 ft width , floor door stopper small , wooden ply cutting blade , fevicol sr 998 , araldite 180 gms , vinyl flooring sheet 1mm thickness , pbs roll 1.5 mm thick 01 mtr width 20 mtr length make shalimar , oil stone 6inch x 2inch x 1inch , glass cutter mechanical , tinted toilet window glass pan 6ft x 4ft x 3 mm , glass pan 6ft x 4ft x 4 mm , glass putty , looking mirror 2ft x 4ft aluminium beeding , looking mirror 2ft x 1.5ft aluminium beeding , ravel plug pvc 4mm or 6mm , door handle aluminium 4inch , haxsaw blade 0.50inch high speed 1ft long appx , haxsaw blade 1inchhigh speed 1ft long appx , m seal 100 gm , suction pump for clearing blockage bath or toilet 3inch dia , tower bolt aluminium 6inch , tower bolt aluminium 8inch , tower bolt aluminium 10inch , door closer helical , door closer hydraulic , sliding bolt 12inch , sliding bolt 8inch , handle consealed 4inch , handle folding 3inch , plastic bush 2 inch length and thick 12 mm , ss screw 0.50inch , ss screw 0.75inch , butt hinges ss0.75inch x 0.75inch x 3inch , tower bolt 4 inch , curtain socket one side 1 inch matki , ss handle 6inch , ss handle 4inch , mortec lock , auto cut hinges , furniture pvc edge band tape 0.75inch ivory 50 mtrs , furniture pvc edge band tape 0.75inch wooden 50 mtrs , sand paper , ceramic tiles 0.30 m x 0.30m x 6 mm , ceramic non skid tiles 0.30 m x 0.30m x 6 mm , vertified tiles 0.60 m x 0.60m x 8 mm , vetrified tiles 0.30 x 0.30x 6 mm thick white colour , wall tiles 0.45 x 0.30x 8 mm thick white colour , wall clading tiles 240mm x 60mm x 9mm d colour , j hook 6inch half threaded with nut and washers 8 mm , dr fix it , fevicol sh for wood work , dha iron appx weight of 01 kg , spade appx 1 kg wt , showel with handle make tata or eqvt appx 1 kg wt , pick axe appx 2.50 to 3 kg wt , crow bar 5ft long , tasla 24inch pan mortar plastic appx 18inch to 24inch dia , plumb bob , mason thread plastic , spirit level size 12inch , stabila spirit level type 70 mm or equivalent , mason hammer 1 kg mbt riveting hammer head , mason hammer 1.5 kg , mason trovel small size , mason trovel iron big size , water level pipe 8 mm dia , 3 m cate eye indicator , road sign boards , right angle 12inch , cutting wheel 4inch dia for angle grinder , multipurpose non slip rubber reusable gardening dishwashing scrubbing cleaning gloves size 9 inch , construction black safety gumboots black size 9 , psh 02 rachet type safety helmet with nape strap white colour , psh 02 rachet type safety helmet with nape strap yellow colour , safet jackets white , safet jackets yellow , demolition hammer 5 kgs 1500w , marbel moulding grinder 4 inch dw801 850 w angle grinder , dustless chalks white 100 no per pkt , tile cutting blade , carbon bush for tile cutting machine , tile cutting machine gdc 120 mm professional , ms square pipe 70mm x 70mmx2.6mm th 6mtr length , ms square pipe 50mm x 50mmx2.6mm th 6mtr length , ms square pipe 20mm x 20mmx2.6mm th 6mtr length , ms pipe 40 mm dia 6 mtr length , ms pipe 50 mm dia 6 mtr length , ms angle 50mm x 50mm x 5mm , agnle iron d size , ms flat 1inch x 3mm x 10 mtr length , cast iron weldind road of size 200 , ms arc welding electrode e6013 2.5 mm dia , ms arc welding electrode e 6013 3.15 mm dia , arc welding hand shield screen , arc welding heavy duty copper cable 600 amp 70 sqm , arc welding black glass 11 a1 din , protection glass for arc welding white glass , chipping hammer , tongs 1ft 6inch size , grinding goggles white , hand safe syn 021 welding safety goggles , esab buddy arc 200 inverter //bid details 2 / 98 welding machine , hand gloves , heavy duty arc welding holder 600 amp , heavy duty arc welding earth clamp , angular grinder 800 amps , 355 mm metal cut off grinder , metal cutting blade size 355 x 2.8 x 25.4 mm , welding helmet auto darkening , welding helmet normal , transparent polycarbonate corrugated sheet 10 ft

Lateral Pipe Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government/Public Sector

Corporations And Associations And Others