Latest lazy tongs Tenders | Government lazy tongs Tenders

State Government

CTN :41235196

11 Aug, 2025 2.06 Lacs

Raichur - Karnataka

Tender For procurement of tools & tackles required for chp of rtps - hydraulic jack-100 ton, hyd.jack 50(low height), hydraulic jack - 30 tonne, chain pulley block(5tx10 mtrs) lift -5 x 10mtr, chain pulley block(3tx10mtrs), chainpullyblock 2tx10m, prceision dial gauge, vernier caliper 0-300mm series no. 532

Central Government/Public Sector

CTN :41200187

14 Aug, 2025 NA

Koraput - Odisha

Tender For supply of 42-500-hand-drill-machine , 42-501-abrasive-cutting- machine , 42-502-hydraulic-crimping-tools , 42-503-digital- vernier , 42-505-box-spanner , 42-506-l-n-key-set , 42-507- l-n-key-set , 42-508-screw-driver , 42-509-start-screw- driver , 42-511-spring-nose-plier , 42-512-cutting-plier , 42- 513-pipe-spanner , 42-514-wire-cutter-stripper , 42-515- hammer , 42-516-measurment-tap , 42-517-ball-pin- hammer , 42-519-neon-tester , 42-521-round-file , 42-522- flat-file , 42-523-1-by-2-round-file , 42-524-adjustable- spanner , 42-525-spanner-d-type , 42-526-spanner-ring- type , 42-527-sprit-level , 42-532-welding-screen

CTN :41232146

07 Aug, 2025 NA

Kannur - Kerala

Tender For supply of project components - broadcom / avago compact 650-nm transceiver with versatile, link connector, |singlemode-media convertor (tp link), raspberry pi4computer,model b,4gb ram, fabrication of pcb, waterproof transparent enclosure box, arduino uno board with dip atmega328p, voltage regulator -7808, leds-red, leds-green, electrolytic capacitor-220ufi25v, ckios 20w solar pannel-12v, resistor-1 k, 5v,10apower bank with cable, wifi modulefor raspberry pi, heat sink for voltage regulator, mounting brackets and consumables, chasing m2 s 200m underwater drone rov, mini height bright submersible torch, polyform a-5 buoy 27"diameter -black tms-89923, 1m rvsp cable 17awg 2468 core rs485 signal control, line twisted shielded insulation pvc copperwire audio, cable, gmt neodymium magnet silver round 6x3mm size -, |multipurpose office magnets, |arvikasales copper pipeltube coil length 10 feet width -24, swg 14 inch, hanture acrylic round tube 30cm length clear acrylic, plexiglass lucite tube (id 80mm x od 90 mm), anchor advance fr 6 sg mm 90m fr pvc insulated wire, |lalitharesistor kit box all value, 40values, 1/4 watt, 5%, tolerance,, zero watts led bulb for projects (plastic) standard b22, base, l/r switch, 63amp mcb, adjusting rod pin, ubolt with locknut, lion ev e-rickshaw jhula, 63.5hole plate, e rickshaw kamani bush 1.5 inch, hand brake with wire, andersonconnector, brake paddle, led lights for headlight,tail, indicators, completeev wiring kit connectors, assembly tools:basic tools -wrenches screwdrivers etc, ir sensors, arduino uno at mega 2560, singlechannel 5v relay control with opto coupler, breadboard, 75.led, lcd display, |modaxe red color spst on-off toqgle safety cover switch with aircrafit, clubics v3 steering wheel and pedals setracing controller |motioncontroller, thrustmaster tcaquadrant airbus edition throttle, boat aavantebar groove, 16w, connectivity modes, 6hrs signature sound, multiple soundbarspeaker playtime, bluetooth sound bar,, bu0836a joy stickcontroller board, 10k machinedrotary, precision variable resipsottaenncteiometer with free knob -, holybropixhawk 6x pro standard setv2b, tds sensor- waterconductivity sensor module board kit raspberry pi5-8gb, mpx5010 pressure sensor, 87. mcp 3008adc, 88.sht-31-d temperature sensor, amicismart 1200w dc to dc converter, 20a step-up boost converter 8-60v to 12-80v adjustable power supply , puly bridge rectifier mdq-100a 100a 1600v full wave diode module one phase with radiator , dive flag mounting kit-tools needed to tie flag to a buoy , 48v lithium ion battery for electric scooter - battery capacity: 30-50ah+ battery management system , 48v 1.2 kw bldc hub or mid drive motor , 48v 60-70 bldc controller , 35"or 33" rear axle differential , hall effect throttle with forward/reverse switch , 48v/60v/72v speedometer with key hole , brushless motor tester , universal motorcycle ignition switch waterproof electric start key , xt60 connectors (male female) pair , step down converter module 60-72v to 12v, 20 a output with fuse , dc-dc converter 48v-12v, 10 a dc converter , 48v 10a lithium battery charger with charging port , 48v 100a fuse with fuse holder , 48v 100a circuit breaker , 48v 100a contactor , hydraulic disk brakes for front and rear , front and rear shock absorbers , tubeless tyres with alloy rims (10-12 inch) , 13mm tee set , 43mm kaan set , 30205 bearing , 15mm front axle with bogali , 15mm brake hub , handle bar , 45mm kamaani , 3.75/12 front mudguard , 20 amp converter , harness wiring w16 , mm 7600 ei 4g lte gps/gnss module , cacestar br2205 2300kv bldc motors , syringes 500 ml , macrc b3 pro compact charger , towerpro mg90s servo motor , maxbotix mb1240high performance ultrasonic sensor , waveshare imx 462-99ir cut camera fixed focus 2mp , stax 5.8ghz fpv video transmitter (25-600mw) , dual diversity diy rx5808 5.8 ghz receiver , ujeavette under water propeller engine thruster , hobbyocean underwater thruster 12-16860kv 300 w reverse brushless motor + 40a

CTN :41251309

20 Aug, 2025 NA

Gonda - Uttar Pradesh

Tender For supply & installation of 10 head hydrote , pneumatic testing bench 10-head , valve screwing/unscrweing machine , air compressor for pneumatic testing , vacuum cleaning machine for internal cleaning , hydraulic punching machine for lpg cylinders , rubber insulating safety mats (size: 25 mm) , supporting/testing tools for dpt facility , flameproof pedestal fan 24" (single phase) , flameproof wall-mounted fan 24" (single phase) , flameproof selector switch (on/off switch) , flameproof junction box size: 250 mm x 250 mm

CTN :41203469

25 Aug, 2025 1.50 Crore

West Tripura - Tripura

Tender For supply of different machineries - supply of different machineries., automatic knife sharpening paper cutting blade grinding machine machine size: --grinding length 1600 to 1800mm, grinding width 150/160mm.width of the machine table 200 plus mm, grinding motor 4to6kw, cast iron/welded modular construction, smooth/ss inner area to drain out the cooling water drainage, hardened and ground steel bands for main & side guides, easily exchangeable, cast iron table with t slots & clamps, cast iron swiveling table for bevel grinding in one setting swiveling 360 degrees. additional clamping sides with t slots & clamps, *grinding heads should be smooth to move on carriage ways of the bed, branded grinding motor should be used like siemens/abb/kirloskar etc.,mounted with electro coolant pump, accessories required.:a) herded grounded strip. one set., b) grinding stone., c) honing stones.d). stone desser.,e). spl. tools in any, 43 fully automatic heavy duty hydraulic paper cutting machine-- front table length 680 mm.,front table height 900 mm., minimum (hydraulic) clamp pressure 400 kg.,max. (hydraulic) clamp pressure 4000 kg., smallest cut without false clamp 25 mm., smallest cut with false clamp 25 mm., cutting width 1070 mm., clamp opening 130 mm., weight of the machine 2800 kg or above., back gauge speed (normal) 50 mm. per second., back gauge speed (exp) 200 mm. per second or above., operative power supply 350-500v3 phase., max power within 4.5 kw.,machine height within 1700 mm., operative temperature 10 to 55 degree., hydraulic valve and clutch, operative brake system., multi-layer photo electric safety., double stroke prevention/two hand cutting cycle switch., mechanical overload prevention., air table with 8.8 coating.,the machine should be supply with future provision to incorporate programming system od bear minimum expenses., back gauge positional accuracy 0.03 mm., servo motor driver back gauge mechanism., bhartiya cutter hammer makes control gear., perfect binder machine ----4four) clamp, production speed 2500 per hour., book block size, book width 100 to 270 mm., book length 150mm to 440 mm., book thickness 3 mm. to 50 mm., dimension and weight , length x width x height 3200 mm x 1400 mm x 1220 mm, weight - 2700 kg approx., power supply 415 v, 50 hz 3 phase., damper roller washing machine----machine size: 30 width, 70 length,36 height, machine operation:, forward/reverse switch, max roller replacement: 4(four), max roller size :60 , roller wash tray: stainless steel with m.s fabrication, p.s plate processor- dimension (l x w x h)-1170 x 1260 x 860 mm, plate size- 700 x 970mm, developer tank capacity-40 liters., electric voltage-220 volt., speed-300-600mm / min. automatic double side flip top palte exposure-exposing area -960 x 1200 mm, power supply -220 v single phase, exposure uniformity-85-95%, light source should be from bottom of the exposure machine, metal halide lamp with 3kw capacity with instant start, arrangement for exposing from both sides.

CTN :41211620

29 Aug, 2025 NA

Kanchrapara - West Bengal

Tender For supply of hydraulic crimping tools (10000 psi)make jainson crimping from 6mm sg - 300 mm s gcable socket with pressure guage along including psi valve. make jainson crimping or similar. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :41179665

18 Aug, 2025 NA

Mumbai - Maharashtra

Tender For testing and certification of lifting machines & tools and testing and certification of air reservoir tank of various capacities by hydraulic testing, visual, uti inspection at emu carshed mumbai central/kile for a period of 2 years.

CTN :41166641

29 Jul, 2025 11.42 Crore

Patna - Bihar

Tender For rrsmp/25-26 masaurhi/03 - nh-83 belpatra nagar to bakarpur tak path, clearing and grubbing road land (by manual means) including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification clause 201.1 and direction of e/i, excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross-sections, and transporting to the embankment location with a lift upto 1.5 m and lead upto 1000 m as per technical specification clause 302.3, construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification clause 303.1. for 1000 m lead @ 20 %, construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification clause 303.1. for 100 m lead @ 80 %, dismantling of cement concrete pavements by mechanical means using pneumatic tools breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials upto a lead of 1000 m, stacking serviceable and unserviceable materials separately, granular sub-base with well graded material(grade 2) : construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401., water bound macadam gr iii : providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405., providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400.11 & 400.12 and technical specification clause 406., providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.0 kg/sqm using mechanical means as per technical specification clause 502., providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface tretaed with primer and clened with hydriloc broom as per technical specification aclouse 503., providing and laying semi dense bituminous concrete with 100-120 tph batch type hmp producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting t

CTN :41166610

29 Jul, 2025 25.77 Crore

Purnea - Bihar

Tender For rrsmp/25-26 purnea/03 - pmgsy path diyari to harijan tola diyari via sarpanch tola naya tola, clearing and grubbing road land (by manual means)clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per technical specification clause 201., scarifying existing bituminous surfacescarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per technical specification clause 301.4., dismantling of cement concrete pavements by mechanical means using pneumatic tools breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials upto a lead of 1000 m, stacking serviceable and unserviceable materials separately, excavation in soil using hydraulic excavator and tippers with disposal upto 1000 mexcavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross-sections, and transporting to the embankment location with a lift upto 1.5 m and lead upto 1000 m as per technical specification clause 302.3, construction of subgrade & earthen shoulderconstruction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification clause 303.1., granular sub-base with well graded material (table 400.1)construction of granular sub-base by providing well graded material (crushed stone aggregates and local sand), spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with three wheel 80-100 kn static roller capacity to achieve the desired density, complete as per technical specification clause 401, ( by mix in place method ) for grading ii material, wbm grading 3providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405., a (by manual means ), prime coat (low porosity)providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0kg/sqm using mechanical means as per technical specification clause 502, tack coatproviding and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.25-0.30kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per technical specification clause 503., tack coatproviding and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with hydraulic broom as per technical specification clause 503., patch work over wbm using mix seal surface for bituminous and existing cc pavementproviding, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 13.2 mm to 0.9 mm (type-a) or 13.2 mm to 0.9 mm (type-b) aggregates using penetration grade bitumen (i.e. 92% of standard bitumen and 8% waste processsed plastic by weight s

CTN :41147324

11 Aug, 2025 NA

Kolkata - West Bengal

Tender For supply of lifeboat with davit for grse yard no 3041 orv project : : - self- propelled lifeboat , repair kit for life boat , onboard spare for life boat , tools and test equipment for maintenance , install tools, eqpt. and mtls for lifeboat , commissioning toolsandspares for lifeboat , service for engineers , training , documantation hard copy , documantation soft copy , hydraulic pivoting davit for lifeboat , automatic release hook - arh for davit. , control panel - davit mounted , hand operated portable rc for davit. , onboard spare for life boat davit , installation tools and materials for davit , commissioning tools and spares for davit , documantation soft copy in pen-drive

Lazy Tongs Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector