Get complete information related to latest Lead Powder Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Lead Powder Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Lead Powder Tenders.
Tender For tender for supply of equipment materail design erection testing and commisioning for providing sop to jsv by providing aug of existing 25 kva sstn singnahar to 63 kva aw providing 1phase ld system to jsv main storage in es pukhri under esd koti - 1-ph lt line on st poles with acsr conductor (0.545 km) -supply part, steel tubular poles 8 mtr. long, muff for steel tubular pole with concrete filling, acsr conductor 6/1/2.59, 30 sq.mm, gi wire 8 swg, lt stay set complete, egg insulator (lt), shackle insulator (16kn) (recd-3/761)(iss no 1445/1977), d-iron (u-clamp), nuts and bolts offsizes, aluminium paint, red oxide paint, full clamp, earth knob, lt earthing set complete, spiral pvc spacer (1-phase, 1-ph lt line on st poles with acsr conductor (0.545 km) -erection part, steel tubular poles 8 mtr. long, muff for steel tubular pole with concrete filling, acsr conductor 6/1/2.59, 30 sq.mm, gi wire 8 swg, lt stay set, egg insulator (lt), stay wire (7/10 swg), shackle insulator (16kn) (recd-3/761)(iss no 1445/1977), d-iron (u-clamp), nuts and bolts offsizes, aluminium paint, red oxide paint, full clamp, earth knob, lt earthing set complete, spiral pvc spacer (1-phase, transportation charges ( mechanical transportation+manual carriage for avg lead 2 km), augmentation of existing 11/0.4 kv 25 kva s/stn singnahar to 63 kva in section pukhri-supply part, 11/0.4 kv, 63 kva distribution transformer ( outdoor type) from approved vendor of hpsebl, acsr conductor 6/1/3.35, 50 sq.mm, pipe earthing set i/c coal, charcoal, salt, surge arrester, 9 kv station class (porcelain type), muffs with concrete filling for existing poles in structire, lt distribution panel box with mccb for 63 kva dtr, aluminium paint, lt pvc cable 3.5 core 120 sq. mm, prov. hp make aiq desktop model hp 200 g4 with intell core 3-10110u-10 gen, processor, 8 gb ddr ram expendable up to 16 gb, itb, hdo(t2qorpm)2st antiglare led display with fhd (1920x1060) integrated hd graphics & webcam, 2xusb, 3.0 2xusb, 2.0 cardreader. audio part vgnhdmi/dp port10x100, 1000mcomdilant lan usb keyboard & mouse internalspl. connectivity bo2 11b/g/n/ac pl windows etec. with three years onsite warranty (ii) 650va offline ups system with 12vx7ahx2nos. 158vah/smf battery to provide 20 min. battery backup with three year warranty on ups and battery (iii) cannon/hp laser printer preferably lbp 2900b or hp mfp 1126nw, augmentation of existing 11/0.4 kv 25 kva s/stn singnahar to 63 kva in section pukhri-erection part, 11/0.4 kv, 63 kva distribution transformer ( outdoor type) from approved vendor of hpsebl, acsr conductor 6/1/3.35, 50 sq.mm, pipe earthing set i/c coal, charcoal, salt, surge arrester, 9 kv station class (porcelain type), muffs with concrete filling for existing poles in structire, lt distribution panel box with mccb for 63 kva dtr, aluminium paint, lt pvc cable 3.5 core 120 sq. mm, transportation of distribution transformer ( new capacity dtr from road site to site of work & dismanteled from site of work to road site) a/w mechanical transportation to and from final location
Tender For supply of main switchboard , emergency switchboard , distribution board , 24v dc system with trans rectifier cum battery charger , compact and maintenance free lead acid batteries with battery box , battery charger for main engine starting batteries , battery charge over switch for main engine starting battery , battery charger for dg starting batteries
Tender For corrigendum : supply of plain copier paper (v3) isi marked to is 14490,plain copier paper (v3) isi marked to is 14490,highlighter pen,highlighter pen,permanent marker pen,gel pen (v3),gel pen (v3),gel pen (v3),permanent marker pen,markers for white board (v2),register (v2),register (v2),eraser,pencil box,black lead pencils (v2) as per is 1375,staplers (v2),pin cushions,stapler pin / staples (v2),stapler pin / staples (v2),stapler pin / staples (v2),black lead pencils (v2) as per is 1375
Tender For supply of silastic sheet 1x1x0 point 005inch , hemostatic gelatin sponge gelfoam oblique sponge stan , shah ventilation tubes , bismuth iodoform paraffin paste bipp , kurz ttp variac system total , kurz ttp variac system partial , steristrip 1 inch x 5 inch , 1oblique2 inch x 4 inch , 1oblique4 inch x 4inch , 1oblique4 inch x 3 inch , 1oblique4 inch x 1, 1oblique2 inch box of 12 packs , tracheostomy tube double lumen with cuff fenestrated size 7 point 0 mm , tracheostomy tube double lumen with cuff fenestrated size 8 point 0 mm , trachidress large , trachihold large , sterilized comprehensive ent drapes pack , disposable ent drape with assorted 8 towels, trolly cover, side drape- 2, main drape-1 with cautery and suctionobliquedrill bag with adhesive , customised head and neck surgery pack contains usfda approved sterile split drape self adhesive tape size 175 cm x 300 cm and split 10 cmx100, 4 integrated tube holder reinforced , spray for lubrication of instruments , disposable micro ear suction tips set of 7 , disposable nasal suction cannula , ambu a scope 4 flexible broncho regular 5 point 0oblique2 point 2mm , ambu a scope 4 flexible broncho slim 3 point 8oblique1 point 2mm , ambu a scope 4 flexible rhino laryngo intervention , lina skin hook small, sharp, dual pack, pre sterilised contains 5 hook , mouldable aluminium external nasal splint , thermoplastic external nasal splint, size- large , bipolar cautery lead disposable erbe , pva nasal packing 10 cm , pva nasal packing 4 point 5cm , pva nasal packing 8cm , coblator wand adenoidectomyobliquetonsillectomy , absorbable fibrillar regenerated cellulose hemostatic pack surgical , lacrimal stent , tisseel kit 2 ml , bone granules 5 cc , bte digital hearing aid
Tender For pump motor repair - guide vane, oil seal steel bush(oil seal sleeve), oil seal(pump oil seal), intermediate piece (i.p.) with i.p. leaded bronze bush, pump bowls, rewinding of motor of 20 hp, rewinding of motor of 17.5 hp, rewinding of motor of 15 hp, rewinding of motor of 12.5 hp, rewinding of motor of 10 hp, rewinding of motor of 7.5 hp, rewinding of motor of 5 hp, rewinding of motor upto 3 hp, transportation of pumping machinaries, motor base with pin, circlips(small), bearing (gun metal bush) centrifugal cost aluminium bronze bearing bush, studs and nuts, tip carbon/ferrode padding, thrust bearing block assembly (tb bottom), carbon housing(tb plate), lock ring(circlip big), lower housing, upper housing, lower flange, upper flange, labour charges (overhauling of pump only), brass filter, strainer, cable guard, pump coupling (stainless), pump key (stainless steel) upto 8 stages, pump shaft (stainless steel) counter less ground with key way upto 8 stages, allen screw, steel bush (i.d.o. ss sleeve), d.o. bearing( i.d.o lb bush), discharge outlet (d.o.) bearing(lb bush) and d.o steel bush(ss sleeve), impeller shell moulded with aluminium & bronze, supply and fixing of voltmeter, supply and fixing of ammeter, supply and fixing of led indicator, supply and fixing of wiring kit(sd upto 25hp), supply and fixing of wiring kit(dol upto 7.5hp)(mr), supply and fixing of no-volt (nv) coil, supply and fixing of terminal plate (connector 60a), supply and fixing of terminal plate (connector 30a)(mr), supply and fixing of ryb rotary switch(volt selector), supply and fixing of single phase preventer(20 to 30 hp), supply and fixing of single phase preventer(7.5 to 15 hp) (mr), supply and fixing of 15 amps relay (mr), supply and fixing of 23 amps relay (mr), supply and fixing of 33 amps relay, supply and fixing of 25 amps contactor, supply and fixing of 16 amps contactor(mr), erection of panel board & ms box (outdoor type) (gulbarga pred, pg.no.57, lt.no.12.2), supplying and fixing angle iron frame work fabricated out of m.s. angle iron and m.s. flat with bolt, washer etc and painted with 2 coats of red oxide and then two coats of approved paint 75x75x6mm (pwd ele sr 2014-15, pg.no.49, lt.no.6.39.3), refilling available earth around pipe lines, cable in layers not exceeding 20cms in depth, compacting each deposited layer by ramming after watering with lead upto 50m and lift upto 1.5m including cost of all labour complete as per specification pre sr 2011-12, p-3,1-6., labour charges for laying u.g. cable upto 3.5 core 25 sq.mm as per pwd electrical sr 2010-11, p-68,1-1, class a pvc cable, lifting of struck up submersible pump set above 300 ft (bwssb sr 2017-18/o150g/sl no.27), lifting of struck up submersible pump set upto 300 ft (bwssb sr 2017-18/o150g/sl no.26), labour charges overhauling, lifting of submersible pumpsets, re-errection charges of pumping machinery including overhauling and painting, cable joint, g.l. pipe threading including transportation, labour charges (for over hauling), supply and fixing of ct coil 50/5 & 75/5, supply and fixing of blade set 25a, supply and fixing of blade set 16a(mr), supply and fixing of hylum brand hand plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc and fixing of exciting wood or metal box using nf screw , supplying and fixing polished wood board made out of not less than 15mm thick planks at both sides with planks made out of not more than 2 pieces and fixing the same to the wall using tapered wooden plugs screws etc, fabricating, supplying and mounting ms box made out 14 swg suitable for foor/wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front over equipped with temper proof locking arrangements with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enamelled metal paint etc., com
Tender For procurement of lab equipments for quality control lab of no 1 qc subdivision kibbanahalli - supply, instalation, testing and comissioning speedy moisture meter, as per is2720 (part 2), is12175 range 0-25% (gauge div.0.5percent) with digital weighing balance. item code aim-036-1 with all lead and lift complete as per specification and directions of the engineer-in-charge of work., suply, instalation, testing and comissioning laboratory electric oven with digital indicator cum controller with safety alarm, range 50deg to 250 deg c +/-1 deg c item code aim-9109 with all lead and lift complete as per specification and direction of the engineer-in-charge of work., suply, installation, testing and comisioning specific gravity bottle-100ml item code aim-401-1 with all lead and lift complete as per specification and direction of the engineer-in-charge of work., suply, instalation, testing and comissioning specific gravity bottle-50ml item code aim-401 with all lead and lift complete as per specification and direction of the engineer-in-charge of work., suply, instalation, testing and comissioning of sieve shaker, motorised, with built-in digital timer and 20cm and 30cm dia adaptor suitable for operation on 220v, 50hz, single phase, item code aim-054-1 with all lead and lift complete as per specification and direction of the engineer-in-charge of work., suply, installation, testing and comissioning sieves as per is 2720 (part 4) sieve bras frame 20cm dia x 10mm , item code aim-05337 with all lead and lift complete as per directions of the engineer-in-charge of work., suply, installation, testing and comissioning 20cm dia bras frame sieves with all lead and lift complete as per directions of the engineer-in-charge of work., suply, installation, testing and comissioning lechatelier flask - used for the determination of specific gravity of hydraulic cements as specified in is4031-ii, aim-401 with all lead and lift complete as per directions of the engineer-in-charge of work., suply, installation, testing and comissioning digital thermometer range-50 to 280 deg c , aim-9622 with all lead and lift complete as per directions of the engineer-in-charge of work., suply, instalation, testing and comissioning specific gravity bottle-50ml with all lead and lift complete as per specifications and directions of the engineer-in-charge of work., suply, instalation, testing and commissioning environmental test chamber eco friendly with cooling temperature range-10c to 60c +-1c, humidity-50% to 95% + -4%, double walled, inner chamber ss 304, digital controller cum indicator, size - 610x610x610mm, aim-9878 with all lead and lift complete as per directions of the engineer-in-charge of work., suply of mould, steel, for 70.6mm cube-for preparation of mortar and lime cubes, aim-414 with all lead and lift complete as per direction of the engineer-in-charge of work., spply, instalation, testing and comisioning vicat apparatus with isi certification mark is5513 fitted in aluminium box. item code aim-394 with all lead and lift complete as per specifiations and directions of the engineer-in-charge of work., suply, installation, testing and commisioning le-chatelier mould, with isi certification mark is 5514, each (resistance of mould test apparatus). supplied complete with over weight 300g +/- 1 g item code aim-400 with all lead and lift complete as per direction of the engineer-in-charge of work., suply, instalation, testing and commisioning vibration machine, with built-in digital timer, nabl calibrated - as per is4031, machine is supplied with one cube mould with isi certification mark and poking rod. suitable for operation on 220v, 50hz, single phase, ac supply. item code aim-418-2 with all lead and lift complete as per direction of the engineer-in-charge of work., suply of heating glove with all lead and lift complete as per direction of the engineer-in-charge of work., suply, installation, testing and comissioning swell test apparatus as per is2720 (part 16