Latest leaf area meter Tenders | Government leaf area meter Tenders

CTN :39387314

25 Feb, 2025 10.00 Crore

Muzaffarpur - Bihar

Tender For rrsmp-24-25 muzaffarpur east -1 -01 - t02 - bargaw to shankarpur, clearing and grubbing road land (by manual means) including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification clause 201.1 and direction of e/i, scarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per technical specification clause 301.4., construction of subgrade and earthen shoulders :-construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification clause 303.1., granular sub-base with well graded material (table 400.1) :- construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401., wbm grading 3 (by mechanical means ) :- providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405., wet mix macadam:- providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400.11 & 400.12 and technical specification clause 406., prime coat (low porosity) :- providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.0 kg/sqm using mechanical means as per technical specification clause 502., tack coat :- providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface tretaed with primer and clened with hydriloc broom as per technical specification aclouse 503., bituminous macadam -providing and laying bituminous macadam with 100-120 tph hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over apreviously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction., tack coat :- providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface tretaed with primer and clened with hydriloc broom as per technical specification aclouse 503., semi-dense bituminous concrete :- providing and laying semi dense bituminous concrete with 100-120 tph batch type hmp producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 p

CTN :39387315

25 Feb, 2025 25.82 Crore

Muzaffarpur - Bihar

Tender For rrsmp/24-25 muzaffarpur east-1/02 - t03 - mansurpur to beruadih (odr2), clearing and grubbing road land (by manual means) including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification clause 201.1 and direction of e/i, scarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per technical specification clause 301.4., dismantling of existing structures, like culverts, bridge,retaining wall and other structures comprising of brick masonary including unserviceable material and stacking the serviceable material with all lift and lead of 1000m as per technical specification clause 202., dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including t&p and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per technical specification clause 202., construction of subgrade and earthen shoulders :-construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification clause 303.1., excavation for roadway in soil using manual means for carrying of cut earth to embankment site with a lift upto 1.5 m and lead upto 50 m as per technical specification clause 302.3, granular sub-base with well graded material (table 400.1) :- construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401., wbm grading 3 (by mechanical means ) :- providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405., wet mix macadam:- providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400.11 & 400.12 and technical specification clause 406., prime coat (low porosity) :- providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.0 kg/sqm using mechanical means as per technical specification clause 502., tack coat :- providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface tretaed with primer and clened with hydriloc broom as per technical specification aclouse 503., bituminous macadam -providing and laying bituminous macadam with 100-120 tph hot mix plant produci

CTN :39364445

28 Feb, 2025 32.00 Lacs

Jaipur - Rajasthan

Tender For ebid for supply and installation lab items- stereo zoom binocular microscope with dual light stand with camera. , binocular slide microscope with dual light stand and photographic camera. , stereo zoom binocular microscope with dual light stand , basic binocular slide microscope with dual light stand , dissecting microscope , student compound microscope , analytical electric weighing balance , semi micro balance , electronic balance , electronic weighing balance , top pan balance , bacteriological incubator , insect collection box , insect collection nets (hand nets) , ocular and stage micrometer , knapsack sprayer , soil & plant sample grinder machine , hot plate assembly , hot plate , dietary fiber analysis system , scrubber system for existing six sample automatic nitrogen analyzer. , seed analysis kit , hand moisture meter , 5000/6500 feed and forage analyzer , willy mill grinder , milk analyzer (automatic) , micro kjeldahl n digestion & distillation apparatus , egg candling machine , debeaker , lactometer , burdizzo castrator , electric dehorner , artificial vagina , milk pipette (10.75 ml) , single channel glass abdos micro pipette (100ml) , bull nose ring , trocar cannula , hot branding iron set (0 to 9) , livestock tattoo kit with ear release pliers, green ink, nitrile gloves - 0-9 & a-z digits , animal ear tag applicator , vaginal speculum for goat , california mastitis test kit (cmt) including paddle -500ml , milk feeding bottle for calf with nipple , cow grooming brush , water bath , leaf area meter , ph meter , ec meter , double distillation assembly , refrigerator , acid dispenser , soil saturation paste extraction assembly (6 place) with all accessories , stereoscopic microscope with photographic attachment , compound microscope with photographic attachment , oostenbrink elutriator , sieve set (16, 60, 100, 200, 400 no.) , magnetic stirrers , spectrophotometer , cuvette

Central Government / Public Sector

CTN :38965046

25 Feb, 2025 NA

Murshidabad - West Bengal

Tender For corrigendum : providing of repair and overhauling service - leaf area meter; licor bioscience; yes; buyer premises

State Government

CTN :39242391

20 Feb, 2025 15.85 Lacs

Pondicherry - Pondicherry

Tender For corrigendum : supply of material for the work of construction of post harvesting facilility structure and pucca storage facilities at sembiapalayam village panchayat in nettapakkam commune of ariyankuppam block, puducherry. - hire and running charge of loader, hydraulic excavator (3d) with driver and fuel, (psr code no.0983 pdy) fine sand (zone iv), hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of vibrator ( needle type 40mm), supply of portland cement, (psr code no0295 pdy) supply of stone aggregate (single size) : 20mm nominal size, (psr code no.0982 pdy)supply of coarse sand (zone iii), (psr code no.0293 pdy) supply of stone aggregate : 40mm nominal size, hire charges of diesel road roller- 8 to 10 tonne, (psr code no.0810a pdy) supply of gravel, (psr code no.0297 pdy)supply of stone aggregate (single size) : 100 mm nominal size, hire charges of wall form panel 1250 x 500 mm for centering, hire charges ofdouble clip (bridge clip) for centering, hire charges of single clip for centering, common burnt clay f.p.s (non modular) brick class designation 7.5, supply of twisted steel / deformed bars, (9999a) supply of m30 grade cover block, hire charges of welding by electric plant, supply of mild steel tubes finshed welded type, supply of red oxide zinc chromate primer, supply of precoated glavanished iron profile sheet 0.50 mm tct, supply of galvanished steel j or l hooks 8mm dia, hire and running charges of hydraulic pilling with power unil etc. inclduing complete accessories and shifting at site, hire and running charges of light crane, production cost of concrete by batch mix plant, pumping charges of concrete including hire charges of pump piping work and accessories, supply of c.i pile shoe, supply of m.s clamps for pile shoe, supply of plasticizer / super plasticizer, supply of bitumen hot sealing compound grade a, supply of flame relardant face inslulating impregnated fibre board 12 mm thick, supply of mild steel sheets for tanks, supply of structural steel such as tees, angles, channels and r.s joists, supply of iron pintels including welded pin, supply of mild steel sheets with bolts and nuts to rest on pintels, supply of deharadun white lime, supply of synthetic enamel paint in black or chocolate shade, providing one number of citizen information board of size 0.90 x 1.20m for community work as per the standard drawing of mord. mgnrega (r.c.c. precast), 100mm channel shoulder 2.50m long, m.s tube 40mm dia

Central Government/Public Sector

CTN :39324259

05 Mar, 2025 NA

Delhi - Delhi

Tender For supply of leaf area meter (q3)

State Government

CTN :39230408

21 Feb, 2025 47.20 Lacs

Jaipur - Rajasthan

Tender For package-15 - earth work in excavation in foundation, trenches etc. including dressing of sides and ramming of bottoms, including getting out the excavated material, refilling after laying pipe/ foundation and disposal of surplus excavated material at a lead upto 50m suitable site as per direction of engineer for following depths, below natural ground / road top level.depth upto 1.5 m, providing, laying, spreading and compacting of granular sub-base by providing close graded material (table 400-1), spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with vibratory roller to achieve the desired density, complete as per mort&h specification clause - 401 including all material, labour, machinery, lighting, guarding and maintenance of diversion.grading - iii material, providing and laying lean cement concrete 1:4:8 in sub- base over a prepared sub-grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in concrete mixer, laid manualy, compacted with surface vibrator, finishing and curing complete as per clause 601, 112 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion., providing and laying un-reinforced, dowel jointed, plain cement concrete mix in pavement over a prepared sub base with 43 grade cement, coarse and fine aggregate conforming to is: 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to linesand grades complete as per drawing and as per clause 602, 112 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion.pcc m-20 -base of drain work, reinforcement for r.c.c. work at all levels including straightening, cutting, bending, placing in position and binding all complete.mild steel and medium tensile steel bars., centring and shuttering with plywood or steel sheet upto two stories or height upto 7.5 metre above plinth level including strutting, propping etc. and removal of form for :foundations, footings, bases of columns, etc. for mass concrete.

CTN :39155904

03 Mar, 2025 7.12 Lacs

Channagiri - Karnataka

Tender For tender for construction of godamu in yakkegondi village siddanamath gp davanagere - name board (gdmsidgp01), red oxide (gdmsidgp01), broken granite metal 10 mm (gdmsidgp01), broken granite metal 12.5 mm (gdmsidgp01), corbon electrodes (gdmsidgp01), rms gusset plate (gdmsidgp01), ms pipes of 80 mm to 100 mm dia (gdmsidgp01), unit cost as per the specification (gdmsidgp01), formwork, centering & scaffolding for chejjas, canopy & other architectural projections of minor sections (gdmsidgp01), formwork, centering & scaffolding for beams & lintels of building (gdmsidgp01), formwork, centering & scaffolding for columns & piers (gdmsidgp01), water proofing cement paint (gdmsidgp01), add brush, putty, sand paper, roller at 5% on cost of paint (gdmsidgp01), plastic emulsion paint (gdmsidgp01), gauge18 75 mm ms laths of 2.8 m length (gdmsidgp01), enamel metal paint (gdmsidgp01), m.s rods (gdmsidgp01), binding wire (gdmsidgp01), tmt bars fe 500 (gdmsidgp01), rubber beading for shutters beading (gdmsidgp01), nylon rollers (gdmsidgp01), aluminium window frame section 1.20 mm thick (gdmsidgp01), mixer (concrete small used in culvert) (gdmsidgp01), boulders (gdmsidgp01), bond stone 20 x 20 x 45 cm (gdmsidgp01), size stone 20 x 20 x 25 cms (gdmsidgp01), hom of vibrator 0.71 days (gdmsidgp01), mixer (concrete) - 1 cum capacity (gdmsidgp01), portland cement (gdmsidgp01), coarse sand (zone iii) (gdmsidgp01), broken stone aggregate 12 mm to 10 mm size (gdmsidgp01), broken stone aggregate 20 mm size (gdmsidgp01)

CTN :39155907

03 Mar, 2025 5.46 Lacs

Channagiri - Karnataka

Tender For tender for construction of yakkegondi village govt, primary school compound in siddanamath gp davanagere - name board (sidgp001), vibratory roller 8 tonne (sidgp001), water tanker (sidgp001), gravel 2.36 mm/murrum (sidgp001), water (sidgp001), painter class i (sidgp001), water proofing cement paint (sidgp001), mixer (concrete) - 1 cum capacity (sidgp001), broken stone aggregate 12 mm to 10 mm size (sidgp001), broken stone aggregate 20 mm size (sidgp001), add watering charges at 1 % on material (sidgp001), solid concrete blocks (40 x 20 x 20 cms)4.00 n/sqmm (sidgp001), binding wire (sidgp001), tmt bars fe 500 (sidgp001), add formwork and staging at 20% for height upto 5 m (sidgp001), over head & other miscellaneous charges (sidgp001), mason class i (with tools) (sidgp001), broken granite metal 10 mm(sidgp001), granite metal 20 mm(sidgp001), granite metal 40 mm (sidgp001), coarse sand (zone iii) (sidgp001), portland cement (sidgp001)

State Government

CTN :36800624

25 Jul, 2024 1.30 Crore

Nagaur - Rajasthan

Tender For matarial supply for nrega scheme and other - p.p.c., white cement, fine prechiger, rail/gravel, gravel local, ballast stone brick for other than road work, 400mm measurement hand broken sit boids cart 1/11), 400mm stone broken boids cart 1/11, amin stone broken boids cart 12/10/6 tikesher, samyo for road work, 63-40mm stone broken boids cart 1/11, 63-40mm hand broken stone road boil cut 1/11, 90-45mm. hand broken stone aggregate, kori ravish boyce cart 1/6), yevla boids cut 1/6), binding samayi 14-6) (dal cut 1/, brick (22.5117.50 cm), first class (stassi, second class, solin khareja chilai stone, masonry bera (, masonry ratha (chi, baranja soling (for digging work upto 15cm height), baranja soling (for road paving work 23cm height), arch width of sheet 10-12 length 2-3 morai 2.5-357, stone sheet (flaky materia(3-4" thick & length, 1-2" width, sandstina dpc, sl, coping lintel, tand almira et, 250mm thickness upto 25-40mm thickness, upto 40-50mm thickness, upto 2300 sq. cm, polished kota stone one side side, upto 1000 sq. cm, upto 901 to 2300 sq. cm, upto 2300 sq. cm, marble stone carving mirror 20mm thick, upto 900 sq. cm, upto 901 to 2300 sq. cm, upto 2300 sq. cm, marble chips, marble powder, marble stone (rajasthani 20mm thick), upto 900 sq. cm, upto 901 to 2300 sq. cm, upto 2300 sq. cm, stone grate, single pail 100 x 75 mm, double pail 125 x 75 mm., stone pail, upto 1.5 m length, minimum 40mm thick , 1.5 m to 2.40 m length, minimum 50mm thick , 2.4 m to 3.0 m length, minimum 65mm thick , above 3.0 in length, minimum 75mm thick , precast tiles/rocks , glazed su-30x45 cm , verified size-60x60 cm , interlock tiles/b rick/block for road work , cement interlocking block m-30grade, 80mm thick , fittings with local cash. for doors, windows and furniture), others / teak, factory made doors (30 mm thick, solid and single sheet), structural steel, iron (tor steel fo-415/500 for reinforcement, widing via 18 gauge, iron girders, conia iron square green/leaf angle aman, jage wine and 14 quaestrad/34 jani, barbed iron lar size 12 guage wire and 12 guage strad/12, iron mesh (24 gauge, 14 mesh, module gi box, 2 for soil, 3 for module, module base and cover plate, 2 for module, 3 for module, modular swaying in, 15 marked, sp 5/6 ampere, sp 15/16 ampere, modular circuit outlet, marked, 6 pin 15/16 amp, steel fastener 5 mm 75 mm, scb db, 2+2 way, spn, single door, 2-4 in, spn, single door, 2+6 in, spn, single door, gi pipe (medium thickness., 15.00 mm dia, 40.00 mm dia, copper wire 8 swg (4.00 mm dia) (0.117 kya/m), ci/ms cover plate attached to frame with locking arrangement, pvc water tank body cover (as per 15:12701-1989, diesel road roller 8 to 10 ton, tractor (25-40 hp), tractor trolley, tractor water tanker samta 4000 liter weight, cement ket mixer 5-7 cubic feet, pumping set 15 hp, niddle/plate better mm operator, -grinding machine with operator big, motor i.e.), compressor, hydraulic excavater/cb (bucket capacity 0.4cum), scraper, shuttering ply with beam and other material, shuttering ply with batti and other material, shuttering nohe plate with batti and other material

Leaf Area Meter Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

State Government

Central Government/Public Sector

State Government

State Government