Latest leather cloth scrap Tenders | Government leather cloth scrap Tenders

State Government

CTN :39787014

01 Apr, 2025 34.27 Lacs

Jaipur - Rajasthan

Tender For budget announcement 2023-24 57(1) (f) institute of dermatology for centre of excellence in charak bhawan at sms hospital, jaipur civil work (234.00 lacs) at p.w.d. sub dn.-sms hospital-ii, jaipur. (supply of furniture) - conference table: supply of conference table size 7680x3050x750mm made of white oak wood, oak veneer and ss 304 frame. top thickness 30mm made of bwp plywood with white oak veneer pasting on both sides and edges covered with 30x23mm thick white oak wood with miter joints, modesty panel inner and outer shall be made of 18mm thick bwp plywood with white oak veneer pasting. the legs (08 nos.) shall be made of ss 304 grade with pvd coating. table top shall be supported with 02 nos. 40x25mm ms hollow pipe black powder coated which are connected to ss legs. all wood surfaces shall be polished with water based nontoxic pu polish. electrical pop-up box/cable cubby (16 nos.) with built in sockets as per requirement along with wire management system shall be provided. wood should be of superior quality kiln dried white oak having moisture content not more than 10% and processed with anti-termite treatment in a pressurized chamber to be used. plywood /veneer should be of approved make greenply, century ply, duro or equivalent. laminate should be of approved make greenply, century ply or equivalent. polish of all wood surface shall be finished in approved shade with 03 coats of water based polish in satin finish with prior sanding, sealing with fillers and water based sealer. all complete as per drawing and approved by engineer in-charge., high back chair cushioned : supply of high back chair size 650x580x1200 mm with cushioned seat and back rest. the seating height of the chair ranges from 425mm to 545mm from floor. the seat and back are made up single piece l-plywood and upholstered with leatherette and molded polyurethane foam of density 40 kg/m3. the cushioned armrests are injection molded from polypropylene. the mechanism is designed with features such as knee tilt, 360 degree revolving type, upright position locking back, seat / back tilt adjustment. the chair shall have pneumatic height adjustment of 100mm & class 3 gas lift. ss finish base fitted with 05 nos. of twin wheel castors which are injection molded in black nylon. foam of approved brand sleep well, feather foam, kurlon or equivalent. all complete as per approved by engineer in-charge, chair :supply of chair size 500x500x900mm. the seat and back is made up of 12mm thick hot pressed plywood and upholstered with leatherette and polyurethane foam of density 40 kg/m3. the one piece armrests are injection molded from black polypropylene. the frame is made of dia 19mm x 2mm thick m.s. tube with ss finish. foam of approved brand sleep well, feather foam, kurlon or equivalent. all complete as per approved by engineer in-charge, storage cabinet : supply of storage cabinet size 900x450x750mm made of white oak wood & oak veneer. the cabinet frame section 35x23mm & legs section 33x33 shall be made of solid white oak wood. side panels / shutters / drawers made of 18mm thick bwp plywood with white oak veneer pasting. stone top 20mm thick shall be provided which is pasted on 18mm thick bwp plywood. all wood surfaces shall be polished with water based nontoxic pu polish. good quality telescopic channel/hinges/locks etc. shall be provided. wood should be of superior quality kiln dried white oak having moisture content not more than 10% and processed with anti-termite treatment in a pressurized chamber to be used. plywood /veneer should be of approved make greenply, century ply, duro or equivalent. laminate should be of approved make greenply, century ply or equivalent. polish of all wood surface shall be finished in approved shade with 03 coats of water based polish in satin finish with prior sanding, sealing with fillers and water based sealer. all complete as per drawing and approved by engineer in-charge., computer table : supply of computer table size 1200x

State Government

CTN :39833809

03 Apr, 2025 8.12 Lacs

Gandhinagar - Gujarat

Tender For annual rate contract for the enhancement and its allied work for boards vehicles based at gandhinagar. - providing, supplying, making and fitting of seat covers from high quality pu leatherette uv-resistant, dustproof, waterproof, heat and tear-resistant and antiskid materials by opening and dismantling all seats from vehicle measuring all seat sizes, cutting, applying 12mm to 20 mm high-density soft foam and stitching such seats looks good and accurate finishing and perfect bucket fitting seat covers. after fitting the seat covers into seats, open and dismantle seats to be fitted into vehicle as per original. all above works including all materials, hardwares, consumables and all labour charges. complete in all respect., item no.01b: providing, supplying, making and fitting of seat covers from rich-elegant velvet fabric uv-resistant, dustproof, heat and tear-resistant and antiskid materials by opening and dismantling all seats from vehicle measuring all seat sizes, cutting, applying 12mm to 20 mm high-density soft foam and stitching such seats looks good and accurate finishing and perfect bucket fitting seat covers. after fitting the seat covers into seats, open and dismantle seats to be fitted into vehicle as per original. all above works including all materials, hardwares, consumables and all labour charges. complete in all respect., item no.01c: providing, supplying, making and fitting of cotton loose-type seat covers from 100 percent pure cotton towel fabric uv-resistant, dustproof and tear-resistant, bacteria-resistant and antifungal super soft material by opening and dismantling all seats from vehicle measuring all seat sizes, cutting and stitching such seats looks good and accurate finishing and loose fitting seat covers. after fitting the seat covers into seats, open and dismantle seats to be fitted into vehicle as per original. all above works including all materials, hardwares, consumables and all labour charges. complete in all respect., item no.02: floor carpet: providing, supplying, making and fitting of floor carpet full flooring from high quality pu leatherette of appropriate thickness, uv-resistant, dustproof, waterproof, heat and tear-resistant and antiskid materials by opening and dismantling all seats from vehicle measuring the floor sizes, making floor carpet by cutting, shaping, sticking leather material a such floor carpet flooring looks good and accurate finishing and perfect fitting floor carpet. after fitting the floor carpet flooring open and dismantle seats to be fitted into vehicle as per original. all above works including all materials, hardwares, consumables and all labour charges. complete in all respect., item no.03a: providing and supplying of standard high quality soft cotton and cushion infused material non slip seat galicha, item no.03b: providing and supplying of non-slip seat galicha made from 100 percent high quality polyester yarn super-soft and machine washable material, item no.04 seat back pocket organizer: providing and supplying of pu-leather back seat organizer with foldable dining table tray, multi pocket storage tablet, bottle and tissue paper holder beige (with tray) inside, item no.05a: providing and supplying and fitting of standard make foldable sunshade uv protection window curtains made from high quality polyester cloth including all fitting accessories like spring, hooks, screws, stick bands. all above with material and fitting charges, item no.05b: providing and supplying and fitting of standard make retractable automatic roller sun shades uv protection window curtains made from high quality polyester cloth including all fitting accessories like spring, buckles, screws, metal hooks and roller stick. all above with material and fitting charges, item no.06a: providing and supplying of removable 7d/8d floor matting of any made from engineered thermoplastic/finest quality leatherette 100 percent waterproof and dust-proof and easily foldable, item no.06b: providing and suppl

Central Government And Public Sector

CTN :39817789

01 Apr, 2025 NA

Jalpaiguri - West Bengal

Tender For stripping of pvc tiles and supply and fitment of main bed room, guest room, drawing room, i nspections room, and passing area and kitchen area, supply of all bathroom matt, door matt, floor matt ma ke florina/ soffy, removing of floor tiles and 12mm compreg board and ceramic tiles of 10mm thick with white cement, for guest and main bathroom, provision for fitment of wash basin with pedestal along with al l other accessories. make: - jaquar/parry ware/hindware, provision for fitment of commode best qualit y make. jaquar, parry ware/hindware, supply and fitment of hydraulic door closer make jyoti / godr ej, provision of deluxe chair arm type- fixed arms, color- black, seat material-leather, legs material- stain less steel, make/godrej/ neelkamal, provision for folding tank cover, supply of deluxe cushioned sofa set consisting of (i) 3-seater=01 nos. (ii) single seater=02 nos.make godrej/neel kamal/kurlon, supply of almir ah lock make jyoti/ godrej, supply of door lockmake jyoti/ godrej, supply and fitment of steno room almira h, supply and fitment of ladder in guest room, supply and fitment of shower blind made of heavy-duty pre mium polyester fabric water proof size: w70 inch x l 72 inch. make versha, stripping of old curtain, suppl y and fitment of tape/ring stitched best quality blinds. qty.=42 nos. make: new home decor lite, complete polish item for wooden pelmet, door beats, wooden bed, dining table with chair and floor tiles and all wall and ceiling of laminated sheet etc, supply and fitment of leatherette for seat and berth. make/brand: tulip . (size quantity and specifications are detailed in enclosed annexure). [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :39818522

07 Apr, 2025 NA

Palghat - Kerala

Tender For chair type-non revolving and non tilting chair with arm rest , chair frame type-cantilever, armres t type-continuous armrest, arm rest front side-curved, seat type-padded, backrest type-padded, frame materia l configuration-one piece. (sankaarpremium chair 661 or similar) seat fitted -over flat size in depth wise of the frame on both side with minimum three screws, back rest fitted -by round head screws three seat fitted ov er flat size in depth-wise of the frame on both sides with minimum 3 screws backrest fitted by round head screw s 3 nos. (minimum) on each side armrest fitted n.a frame material configuration one piece frame material sta inless steel (ss 304) the shape of tubular section of frame square section size (diameter/sides) of frame 25 m m frame section wall thickness 1.2 mm the armrest material cushion pad fixed on frame material armrest pad ded with foam armrest upholstered with leatherette armrest material thickness 12 mm seat material single pi ece of cold reduced carbon steel sheet confmg. to grade cr0 of is:513 part 1 (with latest amendment) seat m aterial thickness 12 mm seat padded- yes density of polyurethane foam used in seat (2 kg/cub meter)- 35 seat upholstered with- leatherette gsm of seat cover ( 3 gsm) -220 gsm polyurethane foam thickness (for seat) -35 mm color of seat cover -brown backrest material -single piece of cold reduced carbon steel sheet confmg. to grade cr0 of is:513 part 1 (with latest amendment) backrest material thickness -12 mm backrest padded- yes density of polyurethane foam used in backrest ( 2 kg/cub meter)- 35 backrest upholstered with -leatherette gs m of backrest cover ( 3 gsm)- 220 gsm polyurethane foam thickness (for backrest) -25 mm colour of backrest c over -brown seat depth ( 5 mm) -390 mm seat width ( 5 mm) -440 mm seat height from floor surface ( 5 mm) - 435 mm backrest width ( 5 mm) -350 mm backrest height from seat ( 5 mm) -320 mm arm length ( 5 mm)- 25 0 mm arm width ( 2 mm) -30 mm colour and finish paint type -chrome paint polish type -n.a colour of pai nt -gray warranty period: 6 month(s) from the date of supply [ warranty period: 12 months after the date of d elivery ]

Central Government/Public Sector

CTN :39702515

04 Apr, 2025 NA

Chennai - Tamil Nadu

Tender For corrigendum : supply of driver seat complete assembly to drg no 726-6-1-001 alt n col-i (item no.16) f or train 18 spare to be used in wap-7 locomotives. note: (1) all the crew friendly features of train-18 driv er seat like head rest, arm support, front and back seat movement, reclining back support, vertical height a djustment, leatherette seat cover with comfortable cushion to be identical to train-18 driver seat of make: f. i. s. a. srl (italy)/ vijayjyot /volvo / medha servo drives / jain'm' or similar (2) suitable structural modific ation as necessitated by wap7 loco cab base to windshield viewing height to be done by firm only without any additional cost. [ warranty period: 60 months after the date of delivery ]

CTN :39622535

29 Mar, 2025 NA

Papumpare - Arunachal Pradesh

Tender For tender for supply of wooden coffee table , executive back unit , executive suite , premium back unit , premium main desk , premium two seater sofa , premium three seater sofa , executive single seater sofa , executive three seater sofa , wooden corner table , filing cabinet four door , glass door almirah , executive mesh chair with headrest , pure leather high back chair , pure leather visitor chair , modular conference table , mesh back mid back chair , mesh back visitor chair , glass top center table , glass top corner table , premium reception table , leatherite one seater , leatherite three seater , executive visitor chair , full heigh steel almirah , executive l shape table with hdu , cushion leatherette high back chair , cushion visitor fabric chair , full back chair cushion l , mesh full back chair , mesh plus chair with headrest , bifma level two workstation with keyboard tray pedestal and cpu trolley , metal single bed , single bed mattress , canteen ms chair , dining table eight seater

Central Government/Public Sector

CTN :39614180

28 Mar, 2025 24.99 Lacs

Delhi - Delhi

Tender For supply of provision of furniture and misc items at bahadurgarh railway station under amrit stations scheme--providing and placing of 2 seater sofa. overall size of 2 seater sofa: 1460mm(w) x 905mm(d) x 855mm(h) x450mm(sh). the seat shall be made of pu foam with density 28 2 kg/cu.mtr having an additional top layer ofsupersoft pu foam with density 32 2 kg/cu. seat shall be upholstered with fabric or leatherette. back foam: theback shall be made of pu foam with density 28 2 kg/cu. mtr with two additional top layer of supersoft foam ofdensity 322 kg/cu. mtr, upholstered with fabric or leatherette. understructure shall be made up of 1.20.1 cm.thick hot pressed plywood (which also shall be resistance and termite proof as per is:303.) and pinewood of crosssection deviod of major knots and surface defects 6 nos. per seat and 3.8mm dia. zigzag spring assembly ismounted over understrucrure for cushioning effect. it shall be a welded assembly made in stainless steel (grade ss202) tube & plate with plastic endcap. certification: the company should be iso-9001, 14001, 45001, bifmamembership and aiota certified. the item should be as per certifications and specifications as per the directionof engineer-in-chargeproviding and placing of 3 seater sofa. overall size of 3 seater sofa: 2060mm(w) x 905mm(d) x 855mm(h) x450mm(sh). the seat shall be made of pu foam with density 28 2 kg/cu.mtr having an additional top layer ofsupersoft pu foam with density 32 2 kg/cu. seat shall be upholstered with fabric or leatherette. back foam: theback shall be made of pu foam with density 28 2 kg/cu. mtr with two additional top layer of supersoft foam ofdensity 322 kg/cu. mtr, upholstered with fabric or leatherette. understructure shall be made up of 1.20.1 cm.thick hot pressed plywood (which also shall be resistance and termite proof as per is:303.) and pinewood of crosssection deviod of major knots and surface defects 6 nos. per seat and 3.8mm dia. zigzag spring assembly ismounted over understrucrure for cushioning effect. it shall be a welded assembly made in stainless steel (grade ss202) tube & plate with plastic endcap. certification: the company should be iso-9001, 14001, 45001, bifmamembership and aiota certified. the item should be as per certifications and specifications as per the directionof engineer-in-charge.6 each3providing and placing in position of center table. the top shall be made of which shall be 12+/-0.3mm thick blacktinted toughened glass uv glued with bushes made in ss 202 grade for fixing with understructure. it shall be awelded assembly made in ss202 grade having dia. 12+/-0.04 as per is:1762. overall dimensions of table shall bewidth of table- 1120 mm, depth-600 mm, height-351 mm. certification: the company should be iso-9001,14001, 45001, bifma membership and aiota certified. the item should be as per certifications andspecifications as per the direction of engineer-in-charge.4 each4providing and placing in positon of corner table. the glass shall be 12+/-0.3mm thick black tinted toughened glassuv glued with bushes made in ss 202 grade for fixing with understructure. it shall be a welded assemblymade in ss202 grade having dia. 12+/-0.04 as per is:1762. overall dimensions of table shall be width of table=60.0 cm, depth=60.0 cm, height=35.1 cm. certification: the company should be iso-9001, 14001, 45001, bifmamembership and aiota certified. the item should be as per certifications and specifications as per the directionof engineer-in-charge.3 each5providing and placing overall size of the table shall be 1800mm(w) x 900mm(d) x 750mm(h) & side table1200mm(l) x 500mm(d) x 750mm(h). the table is made of 25 mm thick mdf one side pre-laminate boardconfirming to is-14587:1998 with 0.4 mm pvc membrane pressed on to top. soft closing access flap within-buildpower box are provided on work surface for wire management. the eru top is made of 25 mm thick mdf oneside pre-laminate board confirming to is-14587:1998 with 0.4mm pvc m

CTN :39606139

28 Mar, 2025 NA

Jaipur - Rajasthan

Tender For supply of lock for file compcter , books , keyboard , mouse , adopter for pc , hdmi cable , hdmi switch poart , updating name on appt board , do pad , coffee mug , glass large , white envelope , cup saucer , dustibin plastic , spanner de , adjustable spanner , water tub , envelope , appreciation certificate , cable network , dsc token , electric kettle , table centre with glass top overall dimension 4 feet x 2 feet made of first class hard teak wood with 10mm glass bevelled at all around with double itching line design , leatherette chesterfield 5 seater bracket 3 plus 2 seater sofa in olive green finish , flag stand made of first class teak wood size 760mm x 760mm x 150mm with 25mm 03 brass pipe 25mm of standard length duly polished. flag stand should be melamine polish with dark walnut shade , chair writing of size 22 inch length 21 inch depth 38 inch height made of first class teak wood frame with curved armrest upholstered with olive green leatherette seat and back , peg table with glass top 18 inch x 18 inch made of first class hard teak wood with 10mm glass bevelled at all around with double itching line design qty

Central Government/Public Sector

CTN :39594967

27 Mar, 2025 NA

Kamrup - Assam

Tender For procurement of offcie furnitures - 3 seater premium sofa , 1 seater premium sofa , leatherette mid back chair , glass round coffee table , mesh visitor chair , premium table(main desk+eru+pedestal) , leatherette high back chair , premium bookcase , l shaped office table , computer table

Leather Cloth Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector