Latest leather harness Tenders | Government leather harness Tenders

State Government

CTN :42452772

11 Nov, 2025 NA

Godhra - Gujarat

Tender For supply of rope ladder,walkie talkie set,inflatable rescue boat,safety goggles,safety gloves,tft branch,hosed pipe,floating stretcher,portable emergency lighting system,safety shoes

Central Government/Public Sector

CTN :42149128

31 Oct, 2025 NA

Lakhimpur - Assam

Tender For corrigendum : tender for supply of acetone 2.5 l , ammonium acetate a.r. 500 g , buffer solution ph 4.00 pluse minus 0.02 500ml , buffer solution ph 7.00 pluse minus 0.02 500ml , buffer solution ph 9.20 pluse minus 0.02 500ml , sodium hydroxide pellets 500 g , sulphuric acid 500 ml , hydrochloric acid 500 ml , methylene blue 500 ml , n-butanol 500 ml , ethylacetate 2.5 l , n-hexane 2.5 l , dichloromethane (dcm) 2.5 l , chloroform 2 l , acetonitrile 2.5 l , florisil (6-100 mesh) 250 g , toluene 2 l , diethyl ether 1 l , ethanol 10 l , methanol , a.r. 2.5 l , anhydrous sodium sulphate 200g , petroleum ether 2.5 l , hydrogen peroxide 500 ml , bromocresol green 125ml , boric acid 500ml , copper (ii) sulphate anhydrous 500g , diethyl ether 2.5l , ethanol , folin-ciocalteau reagent (1n) 500ml , sulphuric acid 500ml , hydrochloric acid 500ml , methanol , a.r. 2.5l , methyl red indicator 125ml , n-hexane 1l , dpph (2 , 2-diphenyl-1-picrylhydrazyl) 1g , potassium sulphate 500g , sodium bicarbonate 500g , sodium carbonate 500g , toluene 2.5l , phenol reagent 500ml , sodium hydroxide pellets 2.5l , sodium benzoate 500g , citric acid 500g , pectin 500g , bee wax 250g , vitamin c 100g , iodine 100g , potassium iodide 250g , potassium metabisulphite 500g , potassium hydroxide 500g , lead (ii) acetate anhydrous 500g , chloroform 500ml , acetic acid 1l , ferric chloride 500g , sodium acetate 500g , potassium chloride 500g , glacial acetic acid 2.5l , ferric chloride 500g , tptz (2 , 4 , 6-tris (2-pyridyl)-s-triazine) 1g , aluminium chloride 100g , sodium alginate 500g , hydrogen peroxide 500ml , potassium chloride , edta , ammonium chloride , eriochrome black t , manganese sulphate , potassium iodide , sodium azide , sodium thiosulfate , starch , potassium dichromate , silver sulfate , mercuric sulfate , ferroin indicator , methyl orange , arsenic trioxide , phenophthalein indicator , triphenyl tetrazolium chloride 25 gm , glucose solution 100 gm , triphenyl formazan 5 gm , desiccator (sigma-aldrich) n/a , tham -(tris- 500 gm , p-nitrophenol 25 gm , p-nitrophenyl phosphate disodium salt hexahydrate 25 gm , maleic acid 500 gm , hydrocloric acid 2.5 lt , nitic acid 2.5 lt , ethanol (absolute alcohol) 500 ml , calgon solution 500g , sodium dihydrogen phosphate 500g , ferrous ammonium sulphate 500g , magnesium carbonate 500g , paraffin liquid 500g , potassium dihydrogen phosphate 500g , activated charcoal 500g , dtpa 500g , tea 250g , mono calcium phosphate 25g , azomethin-h 15mg , isoamyl acetate 500ml , methyl organge 25ml , manganous sulphate 500g , ammonium hydroxide 500ml , aspirator bottle with stopcock , wash bottle , burette clamp , draining tray , measuring beaker with handle , measuring beaker with handle , measuring beaker with handle , utility tray , self-standing centrifuge tube , tough tags , uv safety goggles , polypropylene bottles (50 ml) , sample vial (10 ml) ml , separating funnel , pear shape with stand ml , burettes ml , reagent bottles ml , low form beaker with spout ml , low form beaker with spout ml , low form beaker with spout ml , low form beaker with spout ml , low form beaker with spout ml , reagent bottles narrow mouth with screw caps ml , reagent bottles narrow mouth with i/c glass stopper ml , reagent bottles narrow mouth with i/c glass stopper ml , reagent bottles narrow mouth with screw caps , amber ml , ldpe plastic wash bottles ml , desiccator mm , desiccator mm , petridishes 100 x 15 mm mm , petridishes 150 x 25 mm mm , petridishes mm , flat bottle flask ml , erlenmeyer (conical) flask ml , erlenmeyer (conical) flask ml , erlenmeyer (conical) flask amber ml , erlenmeyer (conical) flask , narrow mouth with i/c glass stopper ml , filter paper circles pack , filter paper circles pack , thimbles pack , spatula , spatula , volumetric flasks ml , volumetric flasks ml , cylinders ml , cylinders ml , cylinders ml , cylinders ml , burettes ml , burettes ml , biological oxygen demand bottles (bod bottles) amber colored 3

CTN :42162957

28 Oct, 2025 NA

Pune - Maharashtra

Tender For corrigendum : supply of tile cutting machine gdc 120 mm professional,ms square pipe 70mm x 70mmx2.6mm th 6mtr length,ms square pipe 50mm x 50mmx2.6mm th 6mtr length,ms square pipe 20mm x 20mmx2.6mm th 6mtr length,ms pipe 40 mm dia 6 mtr length,ms pipe 50 mm dia 6 mtr length,ms angle 50mm x 50mm x 5mm,agnle iron d size,ms flat 1inch x 3mm x 10 mtr length,cast iron weldind road of size 200,ms annual rate contract welding electrode e6013 2.5 mm dia,ms annual rate contract welding electrode e 6013 3.15 mm dia,arc welding hand shield screen,arc welding heavy duty copper cable 600 amp 70 sqm,arc welding black glass 11 a1 din,protection glass for annual rate contract welding white glass,chipping hammer,tongs 1ft 6inch size,grinding goggles white,hand safe syn 021 welding safety goggles,esab buddy annual rate contract 200 inverter welding machine,hand gloves,heavy duty annual rate contract welding holder 600 amp,heavy duty annual rate contract welding earth clamp,angular grinder 800 amps,355 mm metal cut off grinder,metal cutting blade size 355 x 2.8 x 25.4 mm,welding helmet auto darkening,welding helmet normal,arc welding black glass 11 a1

Central Government/Public Sector

CTN :42449309

17 Nov, 2025 7.37 Lacs

Sonbhadra - Uttar Pradesh

Tender For supply of shackle,d,50ton , sling web,6m,20t,polystr,rnd,twin pth , sling web,10m,12t,polystr,rnd,twin pth , ladder,30ft,fbr , helmet,sfty,plyprln,540mm,w lamp,30lmn , whistle,mouth , ladder,frp,extended 12m,f electrical use , cplg hose,mxf,f fire fghtng hose 63mm , suit fire protective,fre fighting , extinguisher fire,abc,5kg , extinguisher fire,dcp,5kg , extinguisher fire,mech foam,9l , flodlight,led 350 w,110 to 270v, long range , life buoy,ring,uv prf nylon,is mmd aprvd , jacket safety,life,l , helmet,sfty,hdpe,is 2925,540 to 590mm,white , glv,hnd,canvas,free sz,f hndlng iron , extinguisher fire,co2,5kg , jacket safety,flurscnt,l , kit,sfty,harness,full body , angl grinder,1200w,230v,100mm,10000rpm , gas,da,w cylinder , cyl compressed gas,o2 99.99 pct,7cum , torch cutting,gas,w nozzle 250x450mm , shovel,rnd nose,13x10 1 by 4in , shovel,hnd,sq nose,300 x 230,thk 1.52mm , shackle,d,80ton , shackle,d,10mt , shackle,d,4mt , shackle,d, scrw,frgd stl,25ton , shackle,d, scrw,frgd stl,05ton , shovel,300mm,4 prongs , crowbar,1680mm,11 kg , jack,mech,50ton , crowbar,150mm,31 mm , shackle,d,3ton , shackle,d,1ton , crowbar,octgnl,1650mm,wd 29 mm , block tackle,chn plly,1.5ton , block tackle,chn plly,3ton , block tackle,chn plly,10ton , regulator pressure,dbl stge,f oxygen , regulator, pressure,d.a.gas dbl stage , arrester,da,to be fitted at regulator , arrester,o2,to be fitted at regulator , divider,dngr pyramid,fbr gls,f rd , glv elec,hnd,33kv,w isi spcifcatn , wrench set,bx,8 to 32mm,w spanner rached , frame hand hacksaw,w blade 12 inch , socket wrench set,8 to 32mm,1by 2in , apron,lthr,wldng , glv,hnd,full,lthr,f wldg , welding screen,helmet,slbt , goggles,pln,wht , belt safety,3m,10mm,2000kg,is 3521 , sling web,2m,1000kg,polystr,rnd endless , sling web,4m,30ton,polystr,eye , sling web,5m,2000kgs,polystr , sling web,8m,10000kgs,polystr , sling web,5m,8ton,nyln,plystr , sling web,10m,5ton,nyln,plystr,endless , sling web,6m,25t,polystr,rnd,twin pth , sling web,6m,16ton,polystr,dbl ply

CTN :42363187

27 Oct, 2025 99.9 Thousand

Ananthnag - Jammu And Kashmir

Tender For supply of bid items e e - dash camera two channel with display screen and 256 gb sd card , drill bit set 6 to 12 mm , wire cutter taparia , heavy duty vice bench 150 mm , welding gloves , welding gloves plastic , wire 4 core 2 point 5 sqmm , mcb 63 amp with box , transparent goggles white for welding safety

Central Government/Public Sector

CTN :42377006

08 Nov, 2025 8.97 Lacs

Pondicherry - Pondicherry

Tender For custom bid for services -calibration services; annual maintenance contract (amc) for ground support equipment (gse) and electrical equipment held with icgae puducherry and 848 sqn (cg) shall cover the following salient features: - 1. to maintain all the gse in good working /serviceable condition at all times as per appendix a , b & c 2. one supervisor (diploma equivalent) along with 01 labor technicians to be placed at coast guard air enclave for the daily routine/ monitoring of amc jobs on gse. 3. replacement of all consumables including various graded oil, seals, filters, belts, pneumatic hose, wheels & rubber beading etc. at seller cost as per scope of work / scheduled of requirements. the consumables and oil should be oem specified wherever applicable and for other cases locally available standard quality item which has been checked and cleared for use by station qa cell. 4. painting of gse twice a year in yellow colour paint (two times in entire contract) as per cgae directives after complete removal of old paint to the bare metal and application of new paint up to 50 m on appendix- a s/l-40, 41 and appendix- b s/l 01-04 & 8. painting is not to be undertaken on nuts, bolts, screws and it is to be applied with only approved grease. 5. recharging of nitrogen cylinder (max. 3000 psi with 99.9% purity n2) as mentioned below from central/state govt certified local agency/govt agency with documentary proof for records post n2 charging. hst of cylinder & lp compressor are also to be carried out whenever due with documentary proof. 5.1 appendix- a s/l-02:- 5-6 times per year, max. 3000 psi with 99.9% purity n2 as and when cylinder pressure is less than 500 psi. 5.2 appendix- a s/l-17:- (portable tyre charging rig) 4 times per year. 6. calibration of gauges fitted on gse to be carried out from nabl certified labs as mentioned in appendix a , b & c and certificate to be provided. 7. the scope of works shall include the repairs/ servicing of all the component/equipment of gse including consumables/spares (required for repairing/servicing) the amc firm will bear the cost of repairs of equipment limited to 10% cost of contracted value . 8. in case unit is not satisfied by the service provided by the firm, amc will be terminated after giving warning letter/ notice of one month. it is to be clearly understood that during the grace period of one month, firm will continue to provide services. 9. if the defect / fault is not rectified within 72 hours of its occurrence, this unit deliberate will reserve the right to deduct the proportionate amount for the unserviceability period. 2 10. all the personnel employed for maintenance duty are to be in possession of the following: 10.1 aadhar card and company identity card. 10.2 no police case/vigilance case certificate. 10.3 two sets of uniforms with name of firm embossed/ embroidered on uniform for ease of identification. 10.4 safety shoes, safety gloves, safety helmet, safety goggles of standard quality to be provided to all persons. 11. safety and security of the personnel employed is the responsibility of the firm and any minor or major injury occurring to the individual is not the responsibility of the cgae puducherry or 848 squadron personnel. 12. working hours of the personnel are from 0900-1730 hrs (06 days in week) and they are to provide their contact number to the respective section in charge of gse for contact.

CTN :42408149

12 Nov, 2025 20.30 Lacs

Bardhaman - West Bengal

Tender For supply of mask dst,plug ear,safety goggles,detoneter box,canister,whistle,belt,hand gloves,safety hand gloves,rain gauge,safety belt,safety jacket,retro reflective tape,barricades tape,d6 methanmtr probe,dry cell battery,air sampling bag,aspirator

CTN :42298598

31 Oct, 2025 NA

Mumbai - Maharashtra

Tender For corrigendum : providing of custom bid for services - custom bid for services - valce salvaging job; f work covers salvaging of defective sc valves and restoring them for reuse as per standard procedures and instructions of the officer-in-charge. the contractor shall carry out the following activities in a safe, systematic, and accountable manner: 1. salvaging operations salvaging of defective sc valves shall be carried out as per laid-down procedures using the valve test bench and/or any other equipment or method advised by the officer-incharge. the contractor shall collect defective sc valves from the store after obtaining necessary approvals. 2. cleaning & preparation clean all defective sc valves in the ultrasonic valve cleaning machine and/or other approved valve cleaning systems. ensure all valves are thoroughly cleaned to remove dirt, oil, or contaminants before testing. segregate cleaned valves properly for further inspection and testing. 3. segregation & testing segregate valves based on their source (e.g. hot repair, defective, pin leak, scrapable cylinders, etc.). perform low pressure and high pressure testing of the valves as per laid-down procedures and test parameters. identify valves that are fit for reuse and those that are defective/rejects. 4. salvaging & assembly replace the old o -ring washer of all good salvaged valves with new o -ring washers (to be provided by hpcl). fit safety caps and back covers on the salvaged valves to protect them from dust and contamination. ensure salvaged valves are clean, properly assembled, and ready for storage. 5. storage & documentation arrange salvaged valves type-wise in a countable and organized manner and deposit them in the stores. ensure proper handling to avoid damage or mixing of valve categories. maintain shift-wise records of: o number of valves received, o number of valves cleaned, tested and salvaged, o number of valves rejected. 6. manpower & productivity contractor shall provide minimum one manpower per shift. a minimum target of 400 sc valves shall be salvaged per manpower per shift. inventory of defective valves pending salvaging shall not exceed one day s generation. 7. materials & consumables hpcl shall provide o -ring washers, safety caps, back covers, and other reusable fittings. kerosene and other cleaning consumables shall be supplied by the vendor. contractor shall ensure availability of all tools and accessories required for smooth execution. 8. certification & payment the shift officer shall certify the salvaged quantity at the end of each shift. payment shall be made strictly on actual quantity salvaged and accepted by hpcl. any deviation or failure to meet daily targets may attract penalty as per tender terms. 9. safety & compliance all activities shall be carried out in compliance with hpcl safety norms and oisd guidelines. personnel shall wear required ppe (gloves, goggles, shoes, helmet) during operations. all salvaging and testing activities shall be conducted under the supervision of hpcl personnel.

Central Government/Public Sector

CTN :42390704

10 Nov, 2025 NA

Chennai - Tamil Nadu

Tender For supply of safety goggles (spectacle type) to provide protection against impact andflying particles as per icf specn.no.icf/safety/spec/17.

Central Government/Public Sector

CTN :42395168

05 Nov, 2025 NA

Multi City - Multi State

Tender For supply of safety goggles with ir protection for welders and gas cutters. spec: lens material should be made of polycarbonate with thickness 1.8 to 2.0 mm and filter shade 5 with anti-fog and anti-scratch coating on both sides. it should protect eyes from ultraviolet rays. goggles should have indirect ventilators for air movement. it should be provided with adjustable elastic head band. the frame material should be mechanically strong and weight of goggles not more than 100 gm. it should have a universal fit soft nose bridge to ensure a comfortable fit. the lens should have marking for uv filtration, shade no, anti-fog and anti-scratch. the goggle lens should be tested and certified to class-i as per en166.

Leather Harness Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector