Tender For bid to ras supply of frequency shift keving modulation demodulation kit , amplitude shift keying modulation demodulation kit , phase shift keying modulation demodulation kit , pulse amplitude pulse width position modulation and demodulation kit , amplitude modulation transmitter kit , amplitude demodulation reciever kit , varactor diode trainer kit , four probe measurement , solar cell characteristics apparatus , scr characteristics apparatus with aluminum panel with square meters , ujt characteristics apparatus and ujt as relaxation oscillator with aluminum panel and square meters , hall measurement setup , led characteristics apparatus with aluminum panel and square meters , opto electronic devices characteristics led ldr photo diode with aluminum panel and digital panel meters , gate or base drive triggerign circuit , study various scr commutation circuit , variac 10 amps single phase , variac 10 amps three phase , kelvin bridge trainer kit , maxwell bridge trainer kit , hey bridge trainer kit , shearing bridge trainer kit , conversion of galvanometers into voltmeters and ammeters with aluminum panel and square meters , ohm law apparatus with aluminum panel two square meters and power supply , verification of kcl and kvl with aluminum panel and square meters , verification of superposition theorem , verification of thevenin and norton theorem , verification of maximum power transfer theorem , maximum power transfer theorem with bakelite panel and round meters , lcr resonance apparatus apparatus with builtin sine wave oscillator bid number/ & ( * ) : gem/2025/b/5838407 dated/ + : 23-01-2025 bid document/ 3 3 1 / 24
Tender For supply and installation of physics instruments - c.r.o. dual trace 40 mhz: 1. type of input channels- analog and digital (mixed signal)2. number of analog channels-3. bandwidth - 300 megahertz.4. display type -colour tft.5. minimum display size- 10 inch.6. time base accuracy- 2.5 parts per million.7. sampling rate per digital channel simultaneously: 1gs/sec.8.record length per digital channel simultaneously- 8m point., function generator 0.3 to 3 mhz (scientific 10 mhz to 25 mhz frequency 1 channel function generator) : 1. frequency bandwidth (sine wave ) 10 mhz to 25 mhz.2. sample rate of arbitrary waveform generator (mega samples/sec)3. amplitude range (at 50 ohm impedance),10mv to 10 v pp. , multiplexers and de-multiplexer with built in power supply :1. material- abs2. display- digital, verification of de-morgen s theorem with built in power supply : 1. type- digital2. consisting of built in power supply3. logic ics connected internally for 1st & 2nd theorem.4. 2 logic input switches with indcators.5. 1 logic output indicator.6. 3 patch chords to connect input and outputs., encoder and decoder circuit with built in power supply : 1. material- pvc2. equipment materials - glass epoxy front panel with pvc3. temperature range- -5 to 45 celsius4. output voltage(regulated) : 5vdc (internally connected) , half adder, full adder, half subtractor, full subtractor with built in power supply: 1. built-in power supply dc +5 v at 500 ma.2. 3 logic input switches with green led display.3. 3 logic output red led display.4. two and gates ( 7408 ), one or gate ( 7432 )two not gates ( 7404 ) & two ex-or gates ( 7486 ) on panel., hall probe method for measurement of resistivity, complete with hall effect setup, hall probes, digital gauss meter, electromagnet and constant current supply. (complete apparatus) : 1. hall probe (ge crystal);(b)hall probe (inas).2. hall effect set-up (digital), dhe-213. electromagnet,emu-75oremu-50v.4. constant current power supply, dps-175 or dps-50.5. digital gaussmeter, dgm-102.6. range- 0-20 ma, apparatus to study characteristics of tunnel diode : 1. instrument comprises of dc regulated power supply of 0-600mv.1. two round meter for voltage & current measurement.2. circuit diagram is printing on front panel & important connections brought out on front panel.3. with well illustrated instruction manual, photo diode characteristic apparatus : 1. material- ms2. frequency- 50hz, photo transistor characteristic apparatus : 1. instrument type- analog2. input voltage - 220 v3. frequency - 50-60 hz, solar cell characteristic apparatus (complete apparatus) : 1. analog voltmeter: 12. analog ammeter: 13. solar panel/photovoltaic cell/solar cell to study characteristics: 14. range of dc voltmeter (in volt): 305. range of dc ammeter (in milli ampere): 506. necessary patch cords for interconnection7. along with instruction manual and demonstration, apparatus to study charging and discharging of a capacitor : 1. built in power supply : +12v variable & -12v, variable dc2. mains : 230v ac , ldr characteristics apparatus. : 1. voltage- 220 v2. apparatus type- analog3. temperature range- 50-60degree, plancks constant using solar cell : 1. instrument type- digital 2. built in power supply : +12v variable & -12v3. necessary patch cords for interconnection
Tender For supply of programmable dc electronic load with custom load pattern as per the specifications item a , voltage signal conditioning module as per the specifications item b , current measurement probe as per the specification item c , data acquisition system as per the specification item d , portable embedded computation device for battery model and data acquisition as per the specification item e , cables and connecting accessories
Tender For corrigendum : design, supply, installation, commissioning, training of various type of equipments for esdm (electronic system design and manufacturing) of msme training centers located at greater noida, bengaluru, puducherry and idemi mumbai on turnkey basis - decade resistance box , ct/pt calibration system , multifunction calibrator , decade capacitance box , ct analyzer , standard resistors , standard weights (el class) , pippete calibration system , low temperature bath (-80 to ambient degree temperature) , frequency counter , energy meter test system (3 position) , precision temperature stabilised resistance standard (high) , decade inductor box , precision temperature stabilised resistance standard (low) , sound level calibrator , digital power analyser , decade resistance box (4 nos.) , process calibrator , hv divider , decade mega ohm box , standard weights (e2 class) , 6 and half dmm , temperature indicator , time interval meter , temperature indicator with compensation , standard weights (f1 class) , semi-micro balance (upto 200 gms) , tachometer calibrator , standard thermocouple (type s) without compensation , sound level analyzer , standard platinum resistance temperature (prt) detector , precision balance (upto 6.1 kg) , thermo-couple calibartion furnace (300 to 1100 degree temperature) , lcr bridge , humidity measurement probe , dry block calibrator (ambient to 600 degree temperature) , anechoic chamber with radiated susceptbility and radiated emission test system , alltitude test chamber , compact emc tester , environmental chamber , digital pressure controller (dead weight pressure tester) , line impedance stablizing network , harmonics/flicker measurement test system , impulse generator , rf shielded chamber , vibration plus environmental chamber , three phase regulated variable power source , humidity generator, relative humidity , bump/shock test system , heat deflection temperature test set , vibration test system , electronic load , conducted rf immunity simulator , rohs testing lab - inductively coupled plasma optical emission spectrometer (icp-oes) , thermal shock chamber , ac dc current source , ultra precision capacitance bridge , esd simulator , horizontaland verticlal flame chamber , rohs testing lab - energy dispersive x-ray fluorescence spectrometer (edxrf) , single phase regulated variable power source , precision energy standard , rohs testing lab - gas chromatograph mass spectrometer (gc-ms) , ingress of water test system - i set , rohs testing lab - ion- chromatograph (ic) , needle flametest chamber , salt spray chamber , dust chamber , digital storage oscilloscope , defibrillator proof test set , thermostat endurance test set , flexing test apparatus , electrical safety tester , winding resistance meter , temperature recorder , radiation meter , tracking test apparatus , gas detector , cord anchorage test set , digital multimeter (handheld/desktop) , glow wire test apparatus
Tender For state-of-art fully digital high end latest color doppler echo cardiology system for adult, paediatric and neonatal application with all quantification software's including contrast study, system must be offered with a minimum of 40 lakh digital processed channels. original technical data sheet should be enclosed in technical bid to support the number of channels on the systems. if not mentioned, please attach a letter from manufacturer along with the technical bid clearly stating the digital processed chan nels of the offered system, system should incorporate latest image acquisition & processing technology maintaining uniform spatial resolution, tissue uniformity through complete fov at high temporal resolution resulting high diagnostic confidence. please attach white paper on this technology, system should have broad band beam former capable of processing signals from 1-16 mhz, high resolution main display minimum size 21 inch with wide viewing angle. lnbuilt 12 inch high resolution touch screen user interface capable of image display and complete image processing & measurements, system, control panel, and monitors mounting should have continuous height and angle adjustment for operator comfort especially suitable for multiple -user depts. with high patient load., system should incorporate facility for high r~solution 2d, m mode, pw, cw doppler color flow imaging, color power angio imaging with high frame rate of min 1900fps for 2d & 200 fps for color imaging, system should have full spectrum imaging, speckle reduction filter, spatial compound imaging, phase inversion tissue hannonic imaging, trapezoidal imaging &contrast enhanced imaging(low-mi), system must be offered with speckle reduction imaging: image processing technique to remove speckles and clutter artifacts., system should have strain quantification imaging, including strain assessment for la, lv and rv, split screen view with independent cine loops & cfm. simultaneous b mode& b color mode., 2 d measurement should include calipers for distance/ depth, angle, areal circumference by ellipse/trace etc, integrated stress echo facility to perform stress echo exams., system should have real time triplex mode facility in 2d, color and doppler modes., system should have dynamic modes of 270db or higher, system should have high prf(mention rate-highest will be preferred), system should have scan depth of i to 40 cm or more. please specify through data sheet, system should have 256 shades of grey display, system should have facility for real time and frozen, pan or point zoom. cine loop as well as cine scroll facility in b mode., system should support single button to customize the workflow of doctor., system should have independent steering ofb mode and color on linear probe, system should have individual operator specific atomized workflow protocol which lets operator focus on patients, dedicated sdd of min 512gb for os for fast boot up and separate hdd for patient image storage min 1 tb, system should include anatomical mode, cardiac quantification software including auto ef, tdi, tdi quantification, and stress and strain., system should have contrast imaging with quantification for lvo study and myocardial analysis, system should include auto imt measurement and preferably based on real time data, possibility to modify/edit patient data during and after exam has been completed., system should min 8 point tgc and separately lgc dedicated cardiac applications, system should include integrated report generation sw included choice of embedded images, systems should have standard minimum 4 active probes connectors with electronic switch facility from key board. it should be provided with following transducers. a. adult single crystal phased array probe 1.5 to 4 mhz b. pediatric cardiac phased array probe 3 - 8mhz c. neonatal transthoracic transducer 4-12 mhz d. 3d tee transducer 2 - 7 mhz matrix! single crystal technology with biplane imaging and mini
Tender For shock pulse meter for bearing testing of traction motor with shock pulse measurement, vi bration measurement of all three parameters (displacement, acceleration & velocity), laser tachometer m easurement, stethoscope for easy location of machinery noise, lcd display, along with standard supply: sh ock pulse probe, head phone, vibration sensor, powerfull magnetic base, hand held probe rod, cable with c annectors, laser tachometer probe, charger, instrument manual. detailed specification as per specification no: clw/tm/4111/24-25/029 dated 15/01/2025. make/brand: spm/mcm/skf/fluke or similar. [ warranty period: 30 months after the date of delivery ]