Latest lifting pump Tenders | Government lifting pump Tenders

CTN :40021395

23 Apr, 2025 5.00 Crore

Thane - Maharashtra

Tender For appointment of contractors who participated in the tender for installation of open gym and play equipment in the garden in mira bhainder municipal corporation area under basic amenities on the panel (rate contract). (basic amenities fund) - part (a) play equipment, item no. 1providing & fixing deluxe slide 1.5 mtr( rate approved by garden dpt ), item no. 2providing & fixing deluxe slide 2.1 mtr( rate approved by garden dpt ), item no. 3providing & fixing double arc swing( rate approved by garden dpt ), item no. 4providing & fixing a to b scrambler( rate approved by garden dpt ), item no. 5providing & fixing multi seater see-saw( rate approved by garden dpt ), item no. 6providing & fixing satellite scrambler( rate approved by garden dpt ), item no. 7providing & fixing criss cross scrambler( rate approved by garden dpt ), item no. 8providing & fixing s bridge ladder scrambler( rate approved by garden dpt ), item no. 9providing & fixing maps 6( rate approved by garden dpt ), item no. 10providing & fixing podium bench( rate approved by garden dpt ), item no. 11providing & fixing )loop rung( rate approved by garden dpt, item no. 12providing & fixing hexa climber( rate approved by garden dpt ), part (b) outdoor fitness equipment, item no. 13providing & fixing aero rider ( rate approved by garden dpt ), item no. 14providing & fixing leg lift post( rate approved by garden dpt ), item no. 15providing & fixing abs board single( rate approved by garden dpt ), item no. 16providing & fixing chest & shoulder combination( rate approved by garden dpt ), item no. 17providing & fixing pull up station( rate approved by garden dpt ), item no. 18providing & fixing uneven bar( rate approved by garden dpt ), item no. 19providing & fixing forearm twirl( rate approved by garden dpt ), item no. 20providing & fixing sky walker double( rate approved by garden dpt ), item no. 21providing & fixing sky 3 in 1 ( aerial stroller + leg press + shoulder twirl)( rate approved by garden dpt ), item no. 22providing & fixing back extention( rate approved by garden dpt ), item no. 23providing & fixing standing seating twister( rate approved by garden dpt ), item no. 24providing & fixing single bar( rate approved by garden dpt ), item no. 25providing & fixing leg stretch( rate approved by garden dpt ), artificial grass without pcc 4 tone pe (crown shape) + pp curl 35 mm + 1 mm 3/816 stitches / 10 cm + 3% 7600 detexdensity: 16800 per sqmbacking: pp cloth + mesh + sbr latex, providing and laying cast in situ/ready mix cement concrete in m20 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. the cement mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (wooden centering will not be allowed.), with fully automatic micro processor based plc with scada enabled reversible drum type mixer/ concrete batch mix plant (pan mixer) etc. complete. with fine aggregate (crushed sand vsi grade) (pwd ssr 24.10)

corporations/Associations/Others

CTN :40024926

02 May, 2025 4.22 Crore

Bhanvad - Gujarat

Tender For bid documents for proposed sewerage network of newly developed area & replacement network, 372 nos. house service connections, 744 nos. property connections, rising main, pump house at 3 lifting pumpingstation, electro-mechanical work, with all allied work and o & m for 2 years for bhanvad nagarpalika, bhanvad, dist. - devbhumi dwarka. _ 2nd call

CTN :40025836

05 May, 2025 NA

Gurdaspur - Punjab

Tender For supply of brush cord , switch 16 , speedo cable , rpm gauge , fuel gauge m93 , fuel pipe , door beading , clutch main cyl , air dryer , clutch booster assy , cabin lifting pump rep kit , pump r kit , hold coil assy , switch , switch ignition , switch of head lamps , eng brake switch , indicator switch , push button switch , cabin mtg pad , fuel feed pump , gear lever end , selector switch

CTN :40004775

05 May, 2025 NA

Ajmer - Rajasthan

Tender For supply of main leaf with bushing lh , motor electric 24v 3kw , ram rep kit , cabin lifting pump rep kit , coller bearing od , oil seal , rear gate shocker , assy oil filter , self clutch assy , brg tapper roller , adjusting screw , lock , dumper assy steering , propeller shaft , flasher change over switch , clutch plate , fan beltdimesnional details oc length , assy auto tensioner

CTN :40005571

28 Apr, 2025 NA

Vapi - Gujarat

Tender For supply, installation, testing and commissioning of electro mechanical works of pumping machinery with associated mechanical and electrical equipments, instruments & accessories etc for different head works of vapi municipal corporation area. - item no.1: submersible type pump setsupply, installation, testing and commissioning of submerged submersible pump sets with suitable for working on three phase, 50 hz3percentage ,415v10percentage ac supply, suitable rpm with 3 core flat copper cable from pump to starter panel with cable end terminations, all supports, clamp, pipe fittings, mechanical seal, bearing bush, strainer, pump sensors and other protection, pump control unit etc. suitable construction of foundation/ installation device with cable length from pumps to panels and of following material of construction:m.o.c :- casing : ci, impeller : ss cf8m, wearing ring and bearing bush : bronze, tc mechanical seal, cs/ss bearing, ss shaft with sleeve, ss strainer and ms motor body fasteners : ss 316l, guide rail : ss 316, lifting chain : ss 316capacity of pump - 833 lpm and 35 m. head (15 kw/ 20 hp) - 1 working + 1 standby. the price should include water in oil sensor and io 113 for mechanical seal and motor protections suitable for each pumps., capacity of pump - 1667 lpm and 35 m. head (18.5 kw/ 25 hp) - 1 working + 1 standby, capacity of pump - 2083 lpm and 35 m. head (22 kw/ 30 hp) - 1 working + 1 standby, capacity of pump - 2500 lpm and 35 m. head (22 kw/ 30 hp) -(only supply of pump set - without installation), capacity of pump - 3333 lpm and 35 m. head (30 kw/ 40 hp) - 1 working + 1 standby, capacity of pump - 5833 lpm and 35 m. head (48.75 kw/ 65 hp) - 1 working + 1 standby, capacity of pump - 8333 lpm and 35 m. head (75 kw/ 100 hp) - 1 working + 1 standby, capacity of pump - 7333 lpm and 45 m. head (82.5 kw/ 110 hp) - 1 working + 1 standby, capacity of pump - 11111 lpm and 35 m. head (90 kw/ 120 hp) - 1 working + 0 standby, capacity of pump - 11111 lpm and 35 m. head (90 kw/ 120 hp (only supply of pump set - without installation), capacity of pump - 14286 lpm and 35 m. head (110 kw/ 150 hp) - 1 working + 1 standby, capacity of pump - 16667 lpm and 35 m. head (132 kw/ 180 hp) - 2 working + 1 standby, capacity of pump - 25000 lpm and 26 m. head (150 kw/ 200 hp) - 1 working + 1 standby, item no.2: submersible non-clog vertical pumpsupply, installation, testing and commissioning of sewage submersible, non clog type suitable for working on three phase, 50 hz 3percentage , 415 v 10percentage , ac supply, 1450 rpm synchronous speed with 3 core flat copper cable from pump to starter panel with cable end terminations, all supports, clamps, pipe fittings along with mechanical seal, bearing bush, strainer etc. complete set and following m.o.c: casing: ci, impeller: ss cf8m, wearing ring and bearing bush: bronze, tc mechanical seal, cs / ss bearing, ss shaft with sleeve, ss strainer and ms motor body.capacity of pump - 15 kw/ 20 hp - 2 working the price should include water in oil sensor and io 113 for mechanical seal and motor protections., item no.3: manufacture, supply, lowering, laying, jointing, welding and delivery of electric resistance welded (up to 400mm)/submerged arc welded(above 400mm) m.s.pipe having bevelled ends plate or coil conforming to is-3589-2001 or its latest revision/ amendment for following thickness outside diameter at gwssb store or site anywhere in gujarat state including all taxes, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading conveyance to departmental stores, stacking etc. all complete charwada 2 - jalaram mandir - 219.1 mm dia. (4.5 mm thick)- delivery pipe, balitha 1 - near kabrsthan - 273 mm dia. (5 mm thick)- delivery pipebalitha 2 - bhandarwada - 273 mm dia. (5 mm thick)- delivery pipechhiri 1 vallabh nagar - 273 mm dia. (5 mm thick)- delivery pipe, dungra - azad nagar - 323.9 mm dia. (5.6 mm thick)- delivery pipe vapi - naikwad tanki - 323.9 mm dia.

CTN :40013256

05 May, 2025 NA

Delhi - Delhi

Tender For supply of foot valve pvc 50 mm , gate valve gi brasso 2 inch , pvc pipe end cap male and female 1 2 3 4 1 1 1 2 and 2 inch , gi pipe end cap male and female 1 2 3 4 1 1 1 2 and 2 inch , water test strip , fuel filling pipe , super fix pvc solvent , dosing pump pipe , sand media , activated carbon , star screw bit , rubber gloves , 1 sq mm electric cable , insulation tape , sp mcb 6amp , sp mcb 16amp , dp mcb 32amp , salt lc , pvc l bend 4 inch , pvc t 4 inch , pvc socket 4 inch , fevicol , gi nipple 1 2 inch , upvc 1 2 inch socket , upvc t 1 2 inch , upvc l bend 1 2 inch , upvc union 1 2 inch , taflon tape , upvc solvent , m seal , s s jally round , tile cutter blade , iron cutter blade , nails 1 2 inch , nails 3 4 inch , self thread screw 1 2 inch , self thread screw 1 inch , self thread screw 1 1 2 inch , self thread screw 2 inch , drilling socket 18mm , hinges medium , head light assy rh and lh , air filter , auto tensioner water pump , auto tensioner steering pump , auto tensioner alternator pump , clutch master cyl assy , concertic sleeve cyl , clutch bundy tube , clutch flexible hose joint , hand brake cable , hand brake lever arms , brake caliper pad , kit ball joint front , hand brake assy , pitman arm bush l and s , igination switch , fuel lifting pump bid number/ & ( * ) : gem/2025/b/6138154 dated/ + : 14-04-2025 bid document/ 3 3 1 / 42

State Government

CTN :39495121

19 Apr, 2025 8.42 Lacs

Surendranagar - Gujarat

Tender For corrigendum : procurement of various types of v-belts & rubber item for pumping station, surendranagar.

CTN :39855682

21 Apr, 2025 2.03 Lacs

Mohali - Punjab

Tender For supply of water lifting pump set

State Government

CTN :39704286

22 Apr, 2025 NA

Murshidabad - West Bengal

Tender For corrigendum : supply of essential items for water supply department at the office of kandi municipality. - water supply items at kandi municipality, condensor for 1 hp submersible pump, condensor for 2 hp submersible pump, bi metalic thermal o/l relay 13a-19a with mounting kit, magnet coil for 1 hp submersible pump, magnet coil for 2 hp submersible pump, mcb dp (20a), normal push button switch 10a (red/green), power contactor, 3p (main) with 1 no. aux, coil set for 1 hp submersible pump, coil set for 2 hp submersible pump, preventer for 1 hp submersible pump, preventer for 2 hp submersible pump, cable 6 sqmm cu, power contactor 3p for start cap, supply and delivery of clear water vertical wet type submersible pump suitable for bore well conforming to is : 8034 ( and as amended thereaiter ) with standard moc for potable clear cold water and bee 3 star rated capable of discharging noted m3/h. against head of water column. the pump shall be directly coupled with a continuous rated2- pole suitable wet type vertical squinel cage induction motor. conforming to is : 9283 (and as amended thereafter ), suitable for operation in a-c single phases, 220v,50hz (category b motor),minimum bore well dia 100 mm, hp-2, no of stage-40 , head in mtr. -170, discharge(q) in m3/hr-1.1, nrv size in mm-32, supply and delivery of clear water vertical wet type submersible pump suitable for bore well conforming to is : 8034 ( and as amended thereaiter ) with standard moc for potable clear cold water and bee 3 star rated capable of discharging noted m3/h. against head of water column. the pump shall be directly coupled with a continuous rated2- pole suitable wet type vertical squinel cage induction motor. conforming to is : 9283 (and as amended thereafter ), suitable for operation in a-c single phases220v,50hz (category b motor) minimum bore well dia 100 mm, hp-1, no of stage-40 , head in mtr. -170, discharge(q) in m3/hr-1.1, nrv size in mm-32 , new motor (2 hp), new motor (1 hp), charges of motor winding for 1 hp submersible pump, charges of lowering & lifting pump for 2 hp submersible pump, pump repairing charges for 1 hp, 2 hp submersible pump, pump repairing charges for 2 hp submersible pump, volt meter 96 sqmm digital (0-300v), amp. meter 96 sqmm digital (0-60a), labour:- labour for fitting , fixing & commissioning the submersible pump (each set for 1 hp), labour:- labour for fitting , fixing & commissioning the submersible pump (each set for 2 hp), pvc pipes 25 mm. dia, pvc socket 25 mm. dia, elbow 25mm. dia, tee 25 mm dia, ball valve 25 mm dia, 1" mpa, 1" fta, 3" pvc pipe, 3" pvc elbow, 3" pvc socket, 3" pvc tee, 3" pvc ball valve, 1.5" pvc pipe, 1.5" pvc elbow, 1.5" pvc socket, 1.5" pvc tee, 1.5" pvc ball valve, 1.5" mpa, 1.5" fta, 3/4 pvc pipe, 3/4 pvc elbow, 3/4 pvc socket, 3/4 pvc tee, 3/4 pvc ball valve, 3/4 mpa, 3/4 fta, 3/4 1/2 brass elbow, 3/4 1/2 brass socket, 3/4 1/2 brass tee, 1/2" pvc pipe, 1/2" pvc elbow, 1/2"pvc socket, 1/2" pvc tee, 1/2" pvc ball valve, 1/2"mpa, 1/2" fta, 1/2" brass elbow, 1/2" brass socket, 1/2" brass tee, 1/2" pvc call, 1/2" pillar cock (basin), stand basin, pvc tank (750 ltr), pvc tank (1000 ltr), trunk joint, pvc starter box, labour for fitting and fixing 25mm. dia pvc pipes for above ground work i/c. cost of jonting materials etc. fitting and fixing all necessary specials , cutting pipes, making threads cutting holes in walls of r.c. floor, 4" g.i. pipe, 4" g.i. elbow, 4" g.i. socket, 4" g.i. tee, 4" g.i. switch valve, 3" g.i. pipe, 3" g.i. elbow, 3" g.i. socket, 3" g.i. tee, 3" g.i. switch valve, 3" df bend, 3" dt joint, 3" coupling, 3" flantch, 1 1/2" g.i. pipe, 1 1/2" g.i. elbow, 1 1/2" g.i. socket, 1 1/2" g.i. tee, 1 1/2" g.i. ball valve brass, 1 1/2" union, 1" g.i. pipe, 1" g.i. elbow, 1" g.i. socket, 1" g.i. tee, 1" g.i. ball valve brass, 1" union, 3/4 g.i. pipe, 3/4 g.i. elbow, 3/4 g.i. socket, 3/4 g.i. tee, 3/4 g.i. ball valve brass, 3/4 union, 1/2" g.i. pipe, 1/2" g.i. elbow, 1/2" g.i. socke