Latest lifting tackle Tenders | Government lifting tackle Tenders

Central Government/Public Sector

CTN :40974810

15 Jul, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For providing of custom bid for services - service contract for a) annual thorough examination of lifting machines and lifting tackles, b) annual thorough examination of air receivers, lpg lines, full body harness safety belts and material stackers of bhel-hpvp, v..

CTN :40984712

17 Jul, 2025 9.04 Lacs

Kalpakkam - Tamil Nadu

Tender For annual load testing, preventive maintenance of eot cranes, monorails, mobile cranes, forklift and lifting tackles and auxiliaries systems of emergency diesel generators at pfbr site

CTN :40957448

28 Jul, 2025 NA

Asansol - West Bengal

Tender For supply & fitting of shoulder support bracket (shoe) for 30 ton capacity memu lifting tackle a s per drg. no. mw/157/trs/asn sheet 4 [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40935832

14 Jul, 2025 NA

Bangalore - Karnataka

Tender For annual maintenance contract for servicing and load testing of cranes hoists lifts and lifting tackles at bel bangalore

Central Government And Public Sector

CTN :40945098

28 Jul, 2025 NA

Bilaspur - Chhattisgarh

Tender For inspection, testing & certification of cranes, lifting machines, lifting tackles and pressure vessels of mechanical department over bilaspur division for a period of five years on open tender basis.

CTN :40946928

18 Jul, 2025 NA

Kharagpur - West Bengal

Tender For supply of wheel disc lifting tackle as per drg. no. g/sd8 308 with safe working load of 01 ton with load test certificate and material test certificate from nabl approved test lab.

CTN :40931911

10 Jul, 2025 NA

Howrah - West Bengal

Tender For supply of lifting tackle for b.g. wheel sets as per rdso drg. no: - wdiia-8513/s-1 & rdso drg. no. wdiia8513/s-2 . with load test certificate from govt. approved lab. [ warranty period: 30 mont hs after the date of delivery ]

CTN :40908075

24 Jul, 2025 NA

Mumbai - Maharashtra

Tender For supply and installation of training items for mechanic electric vehicle trade under craftsman training scheme (cts)at consignee locations - steel rule - 300 mm, graduated both in metric and english unit, steel rule - 600 mm, graduated both in metric and english unit, gloves - rubber, industrial/ safety shoes, industrial helmet, v block - 75 x 75 x 50 mm with clamp, v block - 150 x 100 x 75 mm with clamp, micrometer - outside, 0 mm to 25 mm, lc = 0.01 mm, micrometer - outside, 25 mm to 50 mm, lc = 0.01 mm, vernier caliper - 0 mm to 180 mm, lc = 0.02 mm with fine adjustment, micrometer: inside, 5 mm to 30 mm, engineer s square - 150 mm blade, engineer s square - 300 mm blade, angle plate - adjustable - 250 x 250 x 300 mm, spirit level - 150 mm, file - warding, smooth, 150 mm with handle, file - knife edge, 150 mm with handle, file - cant saw, smooth, 150 mm with handle, file - feather edge, 150 mm, file - triangular, smooth, 150 mm with handle, file - round, second cut, 200 mm with handle, file - square, second cut, 150 mm with handle, file - square, second cut, 250 mm with handle, file - triangular, second cut, 200 mm with handle, file - flat, second cut, 250 mm with handle, file - flat, bastard, 200 mm with handle, file - flat, bastard, 300 mm with handle, file set - needle, 160 mm, set of 12, file - half round, second cut, 250 mm with handle, file - flat, bastard, 250 mm with handle, file - round, bastard, 250 mm with handle, file - flat, second cut, 150 mm with handle, file - car body, bastard cut without tang, 300 mm with handle, oil stone - 150 mm x 50 mm x 25 mm, plier - combination, 200 mm, blow lamp - 0.5 liter, spanner set - double ended, 6 mm to 32 mm, set of 12, spanner - adjustable, 150 mm, spanner set - box type, 6 mm to 32 mm, set of 12, magnifying glass - 75 mm, clamp - toolmaker, 50 mm, clamp - toolmaker, 75 mm, clamp - c, 50 mm, clamp - c, 100 mm, scraper set - 200 mm, triangular, half round and flat, chisel - diamond point, 9 mm x 150 mm, chisel - cold, 20 mm x 150 mm, chisel - cold, round nose, 9 mm x 100 mm, motorized tenon saw, hammer - ball peen, 800 grams with handle, hacksaw frame - adjustable, 250 mm to 300 mm, hacksaw blade - length = 300 mm, width = 12.5 mm, thickness = 0.63 mm, tpi = 18, low alloy, packet of 100 blades, hammer - nylon, 30 mm with handle, precision screw driver - set of 6, screw driver - insulated, 10 x 250 mm, screw driver - insulated, 4 x 150 mm, screw driver - insulated, 6 x 150 mm, screw driver - insulated, 8 x 200 mm, screw driver - insulated, 8 x 300 mm, screw driver - philips, set of 5, neon tester - 500 v, portable electric impact drill machine, metal cut-off circular saw: floor standing, portable electric hand grinder: straight, portable electric air blower, portable electric jigsaw, portable electric random orbital sander, digital torque wrench - 20 nm to 280 nm, lifting tackle/ sling: 1 ton, 2 meters, air impact wrench with impact sockets, laser light pen: green, surface plate - cast iron, 600 x 600 mm with stand and cover, screw pitch gauge set - metric and british, 0.25 to 6 mm, 21 leaves, laser distance measuring instrument, palm scale: table top, 1000gm, allen key set - hexagonal, 1.5 mm to 10 mm, set of 9, universal quick adjustable multi-function wrench spanner set, 1/2 inch socket set, two post car lift - capacity 4 ton, electric operated, two wheeler scooter assembly set, transmission gearbox trainer, demonstration board: electric vehicle cooling system, mini commercial electric vehicle chassis, engine and transmission system for electric vehicle, cut section of electric vehicle motors, hvac trainer, multifunction installation tester, electric vehicle service equipment test adapter kit, ac ev charger setup, battery tester with inbuilt printer, lighting and wiring system for electric vehicle, instructor/ office chair - non-revolving, mid back, mesh, instructor/ office table, green board - 4 x 6 feet, stool - height 600 mm, working table - 8 (l) x 4 (w) x 3 (h) feets,

Central Government/Public Sector

CTN :40699744

12 Jul, 2025 NA

Jalpaiguri - West Bengal

Tender For supply, installation and commissioning of lifting tackle assembly for icf & lhb coaches cap acity-30 ton as per drawing no. j&t/judw/13-593, material test certificate, ultrasonic & die penetration te st certificate from nabl approved testing agency, one set consist of item no 01 to 14 ( qty described ) me ntioned on sheet 02 of attached drawing. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40754113

02 Jul, 2025 NA

Tiruchirappalli - Tamil Nadu

Tender For corrigendum : custom bid for services - non-core maintenance activities in m&s-1. the scope of work includes carrying out the following non-core activities of maintenance and services department at bhelpppu, thirumayam as per instructions of maintenance in-charge. as per bhel estimate, it requires indicative 2 no. of unskilled labours daily to complete all the below activities. 1. cleaning of machines, components, oil spilled area during and after maintenance. 2. movement of spares, components and consumables for maintenance. 3. maintenance assistance for heavy works. 4. handling of lubricants, hydraulic oil, gas cylinders and diesel. contractor's scope: aa) cleaning of machines, components and oil spilled areas during and after maintenance: 1. cleaning of sub-assemblies and dismantled components while attending the break-down of machines. 2. cleaning of machine bottom floor, facility bottom floor and hydraulic power pack surrounding area as and when required. 3. cleaning of the machine surface and other accessories & fixtures of the machines for trouble shooting and to access the machine components during maintenance. 4. cleaning of the machine, floor area after attending the breakdown. all the spillage oil, oil soaked cotton waste, refractory wastes and other scrap wastes generated during maintenance to be removed from the surroundings of the machine and moved to the waste bins. 5. cleaning of oil, chips and dust inside and outside machine pit and intricate areas of machines while attending maintenance. 6. cleaning of machine components, filters and stand-by sub-assemblies with suitable cleaning agents. 7. cleaning of machines under shifting and assisting the fitters & electricians for dismantling, shifting and re-erection activities. 8. cleaning of crane parts at the top of the cranes and at the floor level are to be done as per instruction of maintenance in-charge. bb) movement of spares, components and consumables for maintenance: 1. movement of machine components from machine area to work bench and vice versa. 2. movement of raw materials for spares manufacturing to the respective machine shop. 3. movement of spares, consumables, raw materials, gas cylinders, etc., from stores to respective maintenance sections/areas and vice versa. 4. movement of heavy duty cables and cable drums from storage area to work place and vice versa. 5. movement of waste / scrap material to the respective disposal area. 6. movement of crane parts and lifting tackles during maintenance and for testing. 7. movement of furnace castings, refractory bricks, castables, refractory cement, ceramic wool, etc. for furnace maintenance. cc) maintenance assistance for heavy works: 1. assistance in activities like cable laying, dragging, winding, etc. 2. loading & unloading of lpg cylinders, refractory materials, machine parts, etc. from transport vehicles. 3. assisting in loading & unloading of machines / machine parts during erection and shifting of machines as and when required. 4. assistance in various maintenance activities involving heavy works like tightening / loosening of heavy duty fasteners, removal & assembly of heavy bearings, etc. 5. handling of heavy parts of the machine during maintenance. dd) handling of lubricants, hydraulic oil, gas cylinders and diesel: 1. cleaning of lubrication and hydraulic system of machines fairly without any oil traces. 2. assisting fitters for changing the worn out/damaged parts such as hoses, valves, high pressure pipe fittings, filters, etc., while doing maintenance of the systems. 3. assisting in oil top up/replacement with proper grade of oil in the respective hydraulic / lube oil tanks and gear boxes in the machines / equipments. 4. assisting in greasing of machines, cranes and facility items at pppu. all greasing points in the plummer blocks, pillow blocks, guide ways, machines greasing points are to be filled with necessary grade of grease manually or using grease gun wherever possib

Lifting Tackle Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector