Get complete information related to latest Line Connector Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Line Connector Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Line Connector Tenders.
Tender For supply of copper tubular in-lineconnectors (heavy duty long barrel) for cable size 25 sq mm, id-6.8 mm, od:8.8mm, length:35mm to ascon cat. no. acih-6. [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ]
Tender For supply of switch disconnector fuse unit, capacity 200 amps, three pole with neutral link, double break, front operated handle with ss sheet enclosure, as per is:13947 [pt1 ]
Tender For quotation for rate of c/f pump (clear water) and its accessories at saraswatipur rwss - supplying ,installation and commissioning of multi stage/ horizontal split casing/multi stage centrifugal pump (make: kirloskar / wpil/jyoti/ mather & platt) rating-15 kw/20hp as per is:5120, capable for discharging 72 m3/hr against a head of 40 m , consisting of bronze impellers, stainless steel pump shaft, etc. with all accessories coupled with energy efficient (ie3) tefc squirrel cage induction motor confirming to is:325 and is:12615, having 15% more bhp than that of pump, operating on 1500rpm, 415v, 3 ph, 50 hz [make: kirloskar /abb/cgl/bhel] all complete with required size of sluice valve and cidf non- return valve standard fitting, strainers, reducer, foot valve, pressure gauge, nuts & bolts, packings, fitting & fixing, labour & technician, etc. all complete job as per site requirement and direction of e/i. discharging -72 m3/hr and head - 40m (1w + 1s) 20 hp, cost towards making new foundation base for pump -motor set and panel including providing new ms base plate as per sample suitable for 20 hp pump- motor set, cutting and welding where necessary, nuts, bolts, flange etc with all labour, tools and materials all complete job., cost towards making suitable suction line by suppling of ms pipe, bend, flange, nut, bolt rubber insertion, including making hole for suction, cutting, welding etc all complete., cost towards making suitable delivery line by suppling of ms pipe, bend, flange, nut, bolt rubber insertion including joining the new suction line to the existing header by means of cutting, welding etc all complete., providing , erecting and commissioning lt motor control panel board fabricated with ms sheet and painted, dust-vermin proof. floor mounted cubical panel board shall be consisting of proper power distribution 100 a copper busbar- 4 pole, 1 no. 100 a mccb as incoming feeder and 2 nos. 63a mccb as outgoing feeders for motors, 1 no. 63 a mccb as spare feeder (for motor), 2 no. 32a mcb for lighting and other loads. including selector switches, switch disconnector isolator, voltmeters, ampere meters, mfm, indicator lamps, internal wiring, danger board, protection units & relay, capacitor banks/apfc and 02 nos suitable fasd starter, etc. all complete and as per is and direction of e/i .), supplying and erecting 16 sqmm 3 core xlpe / pvc insulated, 1100 v grade un-armoured copper cable with isi mark stranded / solid copper conductor complete erected on wall / panel or in provided trench in an approved manner. (from panel to motors), providing and erecting chemical earthing with all required materials etc all complete., cost of 3t triple type chain pully block suitable as below with 6m lift complete with laoad chain and hand chain suitable for avove lift, tested 50% over load as per is 3832 carry isi etc. all complete job as per the site requirement and indian standard., cost towards dismanteling of old pump set and foundation and making arrangements for removal of debries from the pump house., construction of chamber for 100mm sluices valve.
Tender For quotation for rate of vt pump (raw water) and its accessories at saraswatipur rwss - supplying , installation and commissioning of single/multi stage vertical turbine pump sets (make: kirloskar /wpil/ mather & platt), rating-22kw/30hp approx as per is 1710, capable of discharging 94.56 m3/hr against a head of 50 m, consisting of bowl assemblies, bronze impellers, column assembly, stainless steel pump shaft, line shaft, etc. with all accessories coupled with squirrel cage induction motor confirming to is:325 and is:12615, having 20% more bhp than that of pump, operating on 1500rpm, 415v, 3 ph, 50 hz [make: kirloskar, jyoti, abb, cgl, bhel, jsl] all complete with required size of sluice valve and cidf non- return valve standard fitting, strainers, reducer, pressure gauge, etc. all complete job as per site requirement and direction of e/i. discharging -94.56 m3/hr and head - 50m (1w + 1s) 30 hp, cost towards making new foundation base for pump -motor set and panel including providing new ms base plate as per sample suitable for 30 hp pump- motor set, cutting and welding where necessary, nuts, bolts, flange etc with all labour, tools and materials all complete job for raw water vt pump set., cost towards jointing newly installed pump motor set to the existing header at raw water p/p., providing , erecting and commissioning lt motor control panel board fabricated with ms sheet and painted, dust-vermin proof. floor mounted cubical panel board shall be consisting of proper power distribution 160 a copper busbar- 4 pole, 1 no. 160 a mccb as incoming feeder and 2 nos. 100a mccb as outgoing feeders for motors, 1 no. 100 a mccb as spare feeder (for motor), 2 no. 32a mcb for lighting and other loads. including selector switches, switch disconnector isolator, voltmeters, ampere meters, mfm, indicator lamps, internal wiring, danger board, protection units & relay, capacitor banks/apfc and 02 nos suitable fasd starter, etc. all complete and as per is and direction of e/i ., supplying and erecting 16 sqmm 3 core xlpe / pvc insulated, 1100 v grade un-armoured copper cable with isi mark stranded / solid copper conductor complete erected on wall / panel or in provided trench in an approved manner. (from panel to motors)., providing and erecting chemical earthing with all required materials etc all complete., cost of 3t triple type chain pully block suitable as below with 6m lift complete with laoad chain and hand chain suitable for avove lift, tested 50% over load as per is 3832 carry isi etc. all complete job as per the site requirement and indian standard., cost towards dismantling of old pump set and foundation and making arrangements for removal of debries from the pump house.
Tender For quotation for rate of items of vt pump (raw water) and accessories at gumuria rwss - supplying , installation and commissioning of single/multi stage vertical turbine pump sets (make: kirloskar /wpil/ mather & platt), rating-7.5 hp approx as per is 1710, capable of discharging 24.5 m3/hr against a head of 30 m, consisting of bowl assemblies, bronze impellers, column assembly, stainless steel pump shaft, line shaft, etc. with all accessories coupled with squirrel cage induction motor confirming to is:325 and is:12615, having 20% more bhp than that of pump, operating on 1500rpm, 415v, 3 ph, 50 hz [make: kirloskar, jyoti, abb, cgl, bhel, jsl] all complete with required size of sluice valve and cidf non- return valve standard fitting, strainers, foot valve, reducer, pressure gauge, etc. all complete job as per site requirement and direction of e/i. discharging -24.5 m3/hr and head - 30m (1w + 1s) 7.5 hp, cost towards making new foundation base for pump -motor set and panel including providing new ms base plate as per sample suitable for 7.5 hp pump- motor set, cutting and welding where necessary, nuts, bolts, flange etc with all labour, tools and materials all complete job., cost towards jointing newly installed pump motor set to the existing header., providing , erecting and commissioning lt motor control panel board fabricated with ms sheet and painted, dust-vermin proof. floor mounted cubical panel board shall be consisting of proper power distribution 100 a copper busbar- 4 pole, 1 no. 100 a mccb as incoming feeder and 2 nos. 63 a mccb as outgoing feeders for motors, 1 no. 63 a mccb as spare feeder (for motor), 2 no. 32a mcb for lighting and other loads. including selector switches, switch disconnector isolator, voltmeters, ampere meters, phase indicator lamps, internal wiring, danger board, protection units & relay, capacitor banks/apfc and 02 nos suitable fasd starter, etc. all complete and as per is and direction of e/i .), supplying and erecting 6 sqmm xlpe / pvc insulated, 1100 v grade un-armoured copper cable with isi mark stranded / solid copper conductor complete erected on wall / panel or in provided trench in an approved manner. (from panel to motors)., providing and erecting chemical earthing with all required materials etc all complete., cost of 3t triple type chain pully block suitable as below with 6m lift complete with laoad chain and hand chain suitable for avove lift, tested 50% over load as per is 3832 carry isi etc. all complete job as per the site requirement and indian standard., cost towards dismanteling of old pump set and foundation and making arrangements for removal of debries from the pump house.
Tender For quotation for rate of items of c/f pump(clear water) and its accessories at gumuria rwss - supplying ,installation and commissioning of multi stage/ horizontal split casing/multi stage centrifugal pump (make: kirloskar / wpil/jyoti/ mather & platt) rating-40hp as per is:5120, capable for discharging 30 m3/hr against a head of 101 m , consisting of bronze impellers, stainless steel pump shaft, etc. with all accessories coupled with energy efficient (ie3) tefc squirrel cage induction motor confirming to is:325 and is:12615, having 15% more bhp than that of pump, operating on 1500rpm, 415v, 3 ph, 50 hz [make: kirloskar /abb/cgl/bhel] all complete with required size of sluice valve and cidf non- return valve standard fitting, strainers, reducer, foot valve, pressure gauge, ms delivery & suction pipe, common header, nuts & bolts, packings, fitting & fixing, labour & technician, etc. all complete job as per site requirement and direction of e/i. discharging -30 m3/hr and head - 101 m (1w + 1s) 40 hp, cost towards making new foundation base for pump -motor set and panel including providing new ms base plate as per sample suitable for 40 hp pump- motor set, cutting and welding where necessary, nuts, bolts, flange etc with all labour, tools and materials all complete job., cost towards making suitable suction line by suppling of ms pipe, bend, flange, nut, bolt rubber insertion, including making hole for suction, cutting, welding etc all complete., cost towards making suitable delivery line by suppling of ms pipe, bend, flange, nut, bolt rubber insertion including joining the new suction line to the existing header by means of cutting, welding etc all complete., providing , erecting and commissioning lt motor control panel board fabricated with ms sheet and painted, dust-vermin proof. floor mounted cubical panel board shall be consisting of proper power distribution 200 a copper busbar- 4 pole, 1 no. 160 a mccb as incoming feeder and 2 nos. 100 a mccb as outgoing feeders for motors, 1 no. 100 a mccb as spare feeder (for motor), 2 no. 32a mcb for lighting and other loads. including selector switches, switch disconnector isolator, voltmeters, ampere meters, mfm, indicator lamps, internal wiring, danger board, protection units & relay, capacitor banks/apfc and 02 nos suitable fasd starter, etc. all complete and as per is and direction of e/i ., supplying and erecting 25 sqmm xlpe / pvc insulated, 1100 v grade un-armoured copper cable with isi mark stranded / solid copper conductor complete erected on wall / panel or in provided trench in an approved manner. (from panel to motors)., providing and erecting chemical earthing with all required materials etc all complete., cost of 3t triple type chain pully block suitable as below with 6m lift complete with laoad chain and hand chain suitable for avove lift, tested 50% over load as per is 3832 carry isi etc. all complete job as per the site requirement and indian standard., cost towards dismanteling of old pump set and foundation and making arrangements for removal of debries from the pump house.
Tender For purchase of electrical items - l & t fn 160 tpn open execution type switch disconnector fuse unit sk95713, din type fuse links fn (160 a) (suitable for fn160 tpn switch) make: l & t, din type fuse links (125 a) suitable for fn160 tpn switch) make: l & t, make: l & t fn switch disconnector fuse 63a, tpn/fp open exection din type 415v (sk95421), make: l & t direct on line starter 7.5 hp relay range (9-14 a) model mk1 dol (ss96210), l & t make direct on line starter (5hp) relay range (6-10a) modal mk1 dol, led steet light make- crompton light type - led wattage - 25 watts model - led street light optistar part no : ldstr25cdl volt - 230 v, tube bulb 230v 40 watts philips make, 100 w bc bulb 230 v philips make, tube light chock 230v, 40w, tube light starter 230v, 40w, tube light side holder, 230v, 20w leld tube lightin fitting batten, 230v, 22watts led bc bulb, 24v, 60watts bc bulb, ceramic cable 2 pin porcelain holder base type:b22 (pin type), bajaj electrial ltd (fkame proof) bajaj 125 watts hpmv 240v ac light (cat: bjfw 125 mui, 1.5 sqmm 3 core black copper flexible insulated frls cable, 2.5 sqmm 3 core black copper flexibel insulated frls cable
Tender For corrigendum : supply of c&s make power switchgear spares for lt mcc of unit-6 at ukai thermal power station.(et-6021 emd-6) - 630a, 415v tp sdf(switch disconnector fuse unit), cssdf630d3 type c&s make, 400a, 415v tp sdf(switch disconnector fuse unit), cssdf400d3 type c&s make, 250a, 415v tp sdf(switch disconnector fuse unit), cssdf250d3 type c&s make, 200a, 415v tp sdf(switch disconnector fuse unit), cssdf200d3 type c&s make, 160a, 415v tp sdf(switch disconnector fuse unit), cssdf160d3 type c&s make, 125a, 415v tp sdf(switch disconnector fuse unit), cssdf125d3 type c&s make, 100a, 415v tp sdf(switch disconnector fuse unit), cssdf100d3 type c&s make, 63a, 415v tp sdf(switch disconnector fuse unit), cssdf63d3 type c&s make, 32a, 415v tp sdf(switch disconnector fuse unit), cssdf32d3 type c&s make, c & s make switch disconnector, type:cssd25d3-cs2,25a,3p compplete with handle assy. having door interlock and pad locking arrangement., c & s make switch disconnector, type:cssd25d4-cs2,25a,4p compplete with handle assy. having door interlock and pad locking arrangement., aux. contact, 1no+1nc for 32-63a sfu, cssdfzx46 type c&s make, aux. contact, 1no+1nc for 100-160a sfu, cssdfzx1 type c&s make, aux. contact, 1no+1nc for 200-400a sfu, cssdfzx33 type c&s make, 400a, 415v tp power contactor, coil voltage 110v ac, lc1 fdp400af type c&s make, 330a,415v tp power contactor, coil voltage 110v ac, lc1 fdp330af type c&s make, 265a,415v tp power contactor, coil voltage 110v ac, lc1 fdp265af type c&s make, 250a, 415v tp power contactor, coil voltage 110v ac, ac1, lc1 fdp150af type c&s make, 250a, 415v tp power contactor, coil voltage 110v ac, lc1 fdp250af type c&s make, 185a, 415v tp power contactor, coil voltage 110v ac, lc1 fdp185af type c&s make, 115a, 415v tp power contactor, coil voltage 110v ac, lc1 fdp115af type c&s make, 80a, 415v tp power contactor, coil voltage 110v ac, tc1d8011f5 type c&s make, 65a,415v tp power contactor, coil voltage 110v ac, tc1d6511f5 type c&s make, 50a, 415v tp power contactor, coil voltage 110v ac, tc1d5011f5 type c&s make, 32a, 415v tp power contactor, coil voltage 110v ac, tc1d3210f5 type c&s make, 25a,415v tp power contactor, coil voltage 110v ac, tc1d2510f5 type c&s make, 18a,415v tp power contactor, coil voltage 110v ac, tc1d1810f5 type c&s make, 2no addon block for power contactor, la1-d20 type c &s make, power contactor,make-schneider,type-lc1d80a,aux contact:-1no+1nc, coil voltage:-220v ac, 1no+1nc addon block for power contactor, ta1-dn11 type c & s make, 2no+2nc addon block for power contactor, ta1-dn22 type c & s make, power contactor, make- tc, model- tc1-d1810, rating- ac3: 18a, contact- 1 no, with add on block- model no. ta1 dn22, contact- 2no+2nc, with external coil model no. la9 d09 980, 1no+3nc addon block for power contactor, la1-dn13 type c & s make, over load relay - 200-315a, lr1f315 type c & s make, over load relay - 125-200a, lr1f200 type c & s make, over load relay -100-160a, lr1f160 type c & s make, over load relay - 65-105a, lr1f105 type c & s make, over load relay - 55-70a, tr2-d65361 type c & s make, over load relay - 37-50a, tr2-d65357 type c & s make, over load relay - 28-36a, tr2-d32355 type c & s make, over load relay -23-32a, tr2-d40353 type c & s make, thermal o/l relay tc make 17 to 25 amp. cat. no.tr2-d25322, over load relay - 12-18a, tr2-d18321 type c & s make, over load relay 9-13a, tr2-d12316 type c & s make, thermal o/l relay tc make 5.5 to 8.0amp. cat no. tr2-d09312, over load relay - 4-6a, tr2-d09310 type c & s make, thermal o/l relay tc make 1.6 to 2.5 amp. cat. no.tr2-do9307, over load relay - 2.5-4a, tr2-d09308 type c & s make, over load relay - 1-1.6a, tr2-d09306 type c & s make, thermal o/l relay, amp 0.63- 1.0 a, tr2-d09305.