Latest linear scale Tenders | Government linear scale Tenders

CTN :45688413

07 Jul, 2026 NA

Ambala - Haryana

Tender For dynamic balancing of c/f machine basket, distributor at your workshop., vibration measurement, analysis and dynamic balancing at site.

CTN :45666967

04 Jul, 2026 NA

Krishnagiri - Tamil Nadu

Tender For purchase of civil lab equipments - equipments for lab, direct shear machine:standard compliance:the equipment shall conform to bureau of indian standards is 2720 (part 13) and equivalent astm international astm d3080.technical specifications:shear box size:60 mm 60 mm 25 mm specimen size (complete with grid plates, porous stones, and specimen cutter).normal load capacity:minimum 5 kn with loading yoke and calibrated loading hanger set.shear load capacity:minimum 2.5 kn or 5 kn with calibrated proving ring (with calibration certificate).rate of strain (shear displacement):variable speed drive with controlled displacement ranging from 0.01 mm/min to 1.25 mm/min (motorised model preferred for uniform rate control).displacement measurement:horizontal displacement dial gauge: 0.01 mm least countvertical displacement dial gauge: 0.002 mm or 0.01 mm least countloading frame:rigid, heavy-duty loading frame with corrosion-resistant finish.drive system:motorised with single phase 220 230 v, 50 hz power supply.accessories (to be supplied complete):shear box assemblyproving ring with calibration charttwo dial gaugesloading weights and hangerporous stones (2 nos.)specimen cuttertool kit, auger boring (or) any boring -soil sampling apparatus: engine type: 4-stroke, air-cooled, single-cylinder petrol engine displacement: 196 cc power output: minimum 6.5 7 hp ( 3.5 kw) maximum engine speed: ~3600 4000 rpm starting system: recoil (manual) start fuel type: pure petrol fuel tank capacity: minimum 1.5 1.6 l supported auger bit sizes: 4 , 6 , 8 , 10 , 12 , 14 (100 350 mm) bit material: heavy-duty mild steel with powder coating typical drilling depth: minimum 3.5 4 ft per bit (800 mm 1.2 m) bit coupling: quick-coupling system for easy bit replacements frame: robust tubular steel frame with ergonomic handles and vibration absorbers weight: minimum 20 22 kg (without auger bit), flow table test apparatus: dimensions and specifications as per is 9103, table top made from flat metal plate ,minimum thickness 1.5 mm, table top size:700 mm*700 mm ,with flatness tolerance of 1.5 mm.table top marked with: scribed cross at centre,lines parallel to table edges and central circle of 200 mm diameter underside of table top reinforced to prevent distortion. total mass of table top:16+_ 1kg table top base frame front and upper stops provided as per is 9103. lower front edge fitted with two rigid stops to transfer load directly to base frame. base frame designed to transfer impact load directly to supporting surface. minimizing bounce stop watch-digital -2 nos scale 1 mtr-2 nos mounting wooden platform 300 mm height amc for 3 years inclusive., drying oven:temperature range: ambient (room) up to 250 temperature control: digital pid controller / thermostat for accurate heating. prestogroupaccuracy: typically 1 2 c. chamber material: stainless steel inner chamber for durability and easy cleaning. air circulation: forced convection fan for uniform temperature. shelves: usually 2 3 adjustable shelves. power supply: single phase 220 230 v ac, 50 hz.

Central Government/Public Sector

CTN :45632432

11 Jul, 2026 NA

Bangalore - Karnataka

Tender For supply and installnation of z axis optical linear scale assembly (dro) for nh22 lathe machine

Central Government/Public Sector

CTN :45576859

07 Jul, 2026 NA

Erode - Tamil Nadu

Tender For supply, erection, testing and commissioning of hydraulic spring testing machine (coil scragging and load deflection testing machine) for compression/deflection testing and cycle testing of helical spring with respective load for all size of helical spring of electrical loco bogies of wap1/wap4/wag5/wag7/wap7 and wag9 locomotive along with digital load indicator and length measurement device (digital linear scale c/w read out console) and data retrievable and storage unit as per els/ed technical specification no: sr/els/ed/m1/spring testing/002, dt:16.08.24. warranty is 24 months from date of successful commissioning of the machine. ]consignee sr.dee/rs/els/ed, srtamil nadu1.00 numbersinspection details stage inspection not required2 650306610055amc (y) non stock--- yesconsigneeinr description :camc : post warranty comprehensive annual maintenance charges ( after 2 years of free warranty period ) : annual maintenance contract rates for the next five years after completion of warranty period to be given in the offer. firm to quote separately for individual year ie year 1. tab ( for 3 rd year). year 2 tab ( for 4 th year) , year 3 tab ( for 5 th year) ,year 4 tab ( for 6 th year) and year 5 tab ( for 7 th year) - clause no. 1.11 of els/ed technical specification. firm should quote actual rate of camc in the bid. discounted rate as per npv will be generated by the ireps system for ranking purpose. the rate mentioned in the po will be considered for annual maintenance contract by the consignee after completion of warranty. firm will be bound to accept the annual maintenance contract if consignee desires to go with annual maintenance contract after warranty period else wbg will be encased. annual maintenance contract charges will beprocessed as per the regular procedure through revenue allocation. [ warranty period: 2 years, annual maintenance contract period: 5 years, rate of discounting: 10 % ] [ warranty period: 2 years, annual maintenance contract period: 5 years, rate of discounting: 10 % ] ]

Central Government/Public Sector

CTN :45470306

18 Jun, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For corrigendum : supply of supply & installation of magnetic linear scales and dro in sk12 machine , supply & installation of magnetic linear scale and dro in l45 machine , supply & installation of magnetic linear scale in l45 machine

CTN :45545867

05 Aug, 2026 NA

Kharagpur - West Bengal

Tender For supply of machine condition analyzer for detecting condition of rotating machines & bearings through measurement of vibration as per annexure. it shall be portable and hand held. make shall be m/s. skf model no. cmas-100 sl with charger manual or m/s. uni-t model ut-312 or item to be procured from oem or its authorized dealer alongwith authorization certificate. firm to submit dealership certificate. make: skf / uni-t / any reputed make (firm those who have credential for the same or equivalent item). [ warranty period: 30 months after the date of delivery ] ]

CTN :45512432

03 Jul, 2026 NA

Thumba - Kerala

Tender For givi misure make optical linear scale assembly model gvs400 t5z 1500 05ldq m04 a c58 ml 1500mm resolution 5 micron 05 volts dc 04 meter cable with 9 pin male connector , givi misure make optical linear scale assembly model gvs300 t5z 0350 05ldq m04 a c58 ml 350mm resolution 5 micron 05 volts dc 04 meter cable with 9 pin male connector , givi misure make optical linear scale assembly model gvs400 t5z 0450 05ldq m04a c58 ml 450mm resolution 5 micron, 05 volts dc 04 meter cable with 9 pin male connector , givi misure make optical linear scale assembly model gvs400 t5z 0850 05ldq m04 a c58 ml 850mm resolution 5 micron, 05 volts dc 04 meter cable with 9 pin male connector , givi misure make optical linear scale assembly model gvs400 t5z 1050 05ldq m04 a c58 ml 1050mm resolution 5 micron 05 volts dc 04 meter cable with 9 pin male connector , givi misure make three axis dro assembly type vision 700 model v17 33in n 230v 0 5 resolution 5 micron , givi misure make two axis dro assembly type vision 700 model v17 22 in n 230v 05 resolution 5 micron

Central Government/Public Sector

CTN :45433687

01 Jul, 2026 NA

Koraput - Odisha

Tender For supply of linear scale* magnetical scanning* , accuracy+ /- 5 m* measuring length 840 mm ident no. 2968572 , dig. measuring system* sr67a* 1140* 5 m, ident no. 2968579 , linear scale* magnetical scanning* , accuracy+ /-5 m* measuring length 1240 mm indent no. 2968580.

Corporations And Associations And Others

CTN :45328794

11 Jun, 2026 19.95 Lacs

Delhi - Delhi

Tender For corrigendum : providing t and p items and garden tools for ward no. 171 (cr park) south zone - providing t & p items and garden tools for ward no. 171 (cr park) south zone., supply of telescopic pole pruner:-specification:-pole length including blade: 6.5mblade material: hardened & tempered high carbon steel. the head of the blade shall have a hooked tip useful for cutting twigssaw blade shape: hooked type curved sawblade type & no of cutting teeth: tripple grounded 86 teeth blade length: 15"-16"pole type: light weight telescopic tubular aluminum alloy extendable poleno of positions for pole heightadjustment: 10 positionslocking mechanism: ergonomicvally designed two way locking mechanismtotal working length: max 219"(6623 mm), mln 103" (3103mm) branch cuttingcapacity: 200mm max, petrol operated brush cutterengine: single cylinder, 2 stroke, aircooled onlyengine displacement: 40.2ccpower output: 2kw/2.7hpmax output shaft speed at cuttingattachment: should be minimum 9000 rpmcarburetor: diaphragm with compensator technology.fuel tank capacity: minimum 600 ml.weight(dry, without cutting attachment & deflector): should not be more than 7.5 kgclutch: centrifugal type, clutch shoe support base & lining metal only.multi function handle: should have acceleration, on/off switch at right handle.brushcutter harness: should be double shoulder harness only.anti vibration system: must have 4- point aniti vibration system.vibration level in m/s2 at right handle: should not be more than 2.5 m/s2sound pressure level db(a): should not be more than 105 db(a)drive shaft design: must have drive shaft ends square design type only.certification: must have valid en certification, telescopic petrol operatedpole prunerengine: single cylinder, 2 stroke, air cooled onlydisplacement: should be between 25-30 ccpower output: should be minimum 1.2 hpweight (dry without cutting attachment & fuel): should not be more than 7.5 kgfuel tank capacity (ml): should be minimum 400mlchain oil capacity (ml): must have minimum 200 ml.clutch: clutch shoe linining should be metal only.guide bar length: minimum 30cmguide bar and chain: should have same manufacture onlychain type: every drive link need groove & small oil holes for better lubrication. saw chain pitch should be 1/4" or 3/8picco only and drive link thickness must have 1.1 mm or 1,3 mm.max. output shaft speed (rpm): should be minimum 8000 rpm at chain sprocket.equipment total length with guide bar and chain (cm): should be minimum 220 cm - compressed & total length of equipment -minimum 350 cm - extended.sound pressure level (db/a): should not be more than 95 db(a)vibration measurement m/s2 at control handle extended position: should not be more than 5.5 m/s2certification: must have tuv certification with test standard en iso 11680, supply of lawn mower:-specification:- type of machine walk behind lawn mowers power sourcepetrol engine engine displacement 224ccstart type recoil / pull startspeed control variable speeddrive type all wheel driveblade style rotary typeblade engagement electromagneticcut width (mm) 525 to 549minimum cut height 20 millimetermaximum cut height 80 millimeterblades hardened steelnumber of blades 1number of positions for cut height adjustment 6number of levers for cut heightadjustment: single levernumber of wheels 4front wheel size 203 millimeterrear wheel size 250 millimeterwheel tyres pneumaticif yes, grass catcher / collector / bag volume 70 liter"engine power rating (watt)" 4000 to 4999engine fuel tank capacity 1.4 ltr., supply of synthetic enamel paint in all shades as per required and direction of officer-in-charge., petrol operated chain sawengine : single cylinder, 2stroke, aircooled onlydisplacement: 45.4cc poweroutput: 2.3kw. 3.0 hpmax. engine speed (with guide bar & chain): at least 12500 rpmcarburetor: diaphragm type compensator technology.fuel tank capacity: should be minimum 450 ml.dry weight(without cutting attachment):should not be mor

Central Government/Public Sector

CTN :45374716

17 Jun, 2026 35.5 Thousand

Panchkula - Haryana

Tender For 3 axes d.r.o. complete with linear scales, / covers, stands (machine mounted) for all axes to suit machine traverse as follows: longitudinal traverse = 776mm cross traverse = 307mm vertical traverse = 401mm resolution of all axes = 5micron installation by the supplier. operating voltage 110--260v, 1ph, 50/60hz

Linear Scale Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Corporations And Associations And Others

Central Government/Public Sector