Latest link bolt Tenders | Government link bolt Tenders

Central Government/Public Sector

CTN :43088560

19 Dec, 2025 NA

Ahmedabad - Gujarat

Tender For supply of modified traction link bolt m20

State Government

CTN :43061677

12 Dec, 2025 NA

Delhi - Delhi

Tender For strengthening of (e/m) equipments of various tube wells installed at babu park kotla area under kasturba nagar constituency ac-42 . - s/o double flanged g.i pipe of 50 mm dia. medium class each of 3 mtrs long duly threaded on both ends welded and fitted with g.i flange on both ends having the slot for sub cable.make: - tata/jindal, supply of out door type 7.5 to 10hp hut type electrical feeder pillar/metal board of welded construction of size 1370mm x 760mm x 460mmfabricated with 16 swg m.s. sheet with horizontal and vertical intermediate chamber of suitable size onsuitable size insulating board to make the panel robust, having double door with 14 swg s.s hinges along with double locking arrangement with arrangement for mounting of switch gear and electrical energy meter i/c powder coating, vermin proof having following items.1. mccb 63 amp, 4 pole-1 no2. rccb/elcb 63 amp, 4 pole with earth fault indicator and positive contact indication protecting a circuit automatically 1no3. fully automatic star delta starter of 10hp, 3phase oil immersed type 1no4. digital ampere meter 96mmx96mm square shape of 0-30 amp range 1no5. digital voltmeter of 96mm x 96 mm square shape of 0-500 volt range with selector switch 1no6. led indicating lamps with fitting (a set of 3 lamps) 1set7. shunt capacitor of 5 kvar with three phase isolator 1no8. motor protection assembly having earth leakage protection, phase sequence corrector, single phasing protection, over load protection, high voltage-low voltage protection. 1no9. programmable time switch (i.e. ryb phase & facility to change over from automatic to manual & vice versa) up to 10 h.p.1no10. complete wiring of panel board & installation of electrical accessories in the panel with required copper conductor wire & thimbling etc.as required. the panel board shall be mounted on the base frame of 600mm height made of 50x50x6mm angle iron frame.make:-all the insert used in panel must be of djb approved makes and should be isi marked where make of that equipment is not approved.djb item code 10.2.1, supply of pvc insulated pvc sheathed copper conductor flat cable size 3 core x 4sq mm,1100 volts, confirming to is 694(each roll 100mtr long) make: finolex / havells./kei/any djb approved make., s/o nut bolts,washer dia 1 long full threaded, s/o rubber packing 50 mm dia. flange., lowering and lifting of sub/sets from bore by taking out double flanged gi pipes, submersible p/set, cable, cutting of rusted nuts and bolts etc and replacement of damaged d/f gi pipes, cable, defective pump set etc as per site requirement and lowering of sub p/set, sub cable, gi pipe etc as required, jointing of cable from sub p/set along with holding of cable with pipes and jointing of d/f pipes etc with nuts bolts and rubber packing etc. the job includes hiring of all t&p, tripod stand, chain pulley block and other material handling equipments, safety gadgets ad required and consumable material (rubber packing and nuts bolts) will be arranged by the firm as per site requirement. the other material required during execution will be provided by department.

CTN :43068261

29 Dec, 2025 2.75 Lacs

Bellampalli - Telangana

Tender For procurement of locking plates with nuts for crushers working at khaocp bellampalli area.

Central Government And Public Sector

CTN :43057515

22 Dec, 2025 NA

Bilaspur - Chhattisgarh

Tender For supply of self locking nuts

CTN :42403021

05 Dec, 2025 33.64 Lacs

Barnala - Punjab

Tender For bid to ras bid to ras bid to ras bid to ras corrigendum : supply of mechanical and electrical engineering lab equipments and furniture c c - wheel balancing machine , diesel fuel supply system , abs system trainer , tool maker microscope , pneumatic reamer , portable digital wattmeter three phase , portable analog ammeter ac , portable analog ammeter dc , portable analog voltmeter ac , portable analog voltmeter dc , phase sequence indicator phase indicator , digital multimeter , analog megger insulation tester , single phase transformer , universal motor , dc servo motor , ac commutator motor , variac single phase , three phase ac to dc rectifier set , digital breakdown voltage tester , inverse time over current relay induction type , earth leakage relay , inverse time over current static relay , relay testing kit , sliding rheostat wire wound , inverter , colour coded resistances , single core wire 4 sqmm , single core wire 2.5 sqmm , room heater , electric kettle , electric switch , voltage stabilizers , electric socket , motor coil winding machine , trainer board to study chopper , trainer board to study dual converter , study of mosfet trainer kit , 8085 microprocessor trainer kit , rs flip flop , multiplexer and demultiplexer trainer kit , model cut section of refrigerator , cut section model of air conditioner , mercury vapor lamp kit , sodium vapor lamp study kit , halogen lamp study kit , neon lamp study kit , trolley type drafting machine with standard accessories , executive table , laboratory table with boxes , lecture stand , laboratory table with drawers , battery for inverter , tachometer , comparator stand , pelton wheel turbine test rig , francis turbine test rig , models of different wooden joints , models of screw threads , models nuts and bolts , models of locking devices , models of keys and cotter joints , models of riveted joints , models of bearing as per assembled drawing , models of pulleys , model of drilling jig , model of machine vice , model of piston , model of connecting rod , model of crank shaft and flywheel assembly , models of different types of gears //bid details 2 / 60

CTN :43020662

31 Dec, 2025 NA

Delhi - Delhi

Tender For tender for rate contract of orthopedic spine implants - spine implants, pedicle screw set for spine consisting of 4 screws with ini and 2 connecting rods; top loading, polyaxial screws 4.5mm/5.5mm/6.5mm, length- all sizes, with one trans rod connector(all sizes). titanium., pedicle screw set for spine consisting of 4 screws with ini and 2 connecting rods; top loading, monoaxial screws 4.5m25m/5.5mm/6.5mm, length- all sizes with one trans rod connector(all sizes). titanium., pedicle screw set for spine consisting of 8 screws with ini and 2 connecting rods; top loading, polyaxial screws 4.5mm/5.5mm/6.5mm, length- all sizes. titanium., pedicle screw set for spine consisting of 8 screws with ini and 2 connecting rods; top loading, monoaxial screws 4.5mm/ 5.5mm/ 6.5mm, length- all sizes. titanium, cervical spine locking plate set, titanium. plate length 36mm to 90mm (adequate for one to four level vertebral fixation), 4 screws 4.0 mm( length 14mm/16mm)., top loading implant system for posterior stabilization of cervical spine and upper thoracic spine -the system should have locking screws for angularly stable locking and fixation of the rod. the system must have self- tapping screws. the system must have 3.5 mm ti rod. the system should have oc fusion option. the system should offer hooks. cancellous profile bone screws: 3.5 mm: 8 mm 50 mm (2 mm increments ) 4.0 mm: 8 mm 50 mm (2 mm increments). cortical profile bone screws: 3.5 mm: 28 mm 50 mm (2mm increments). screw head profile: height = 11 mm, diameter=9 mm. rod run = 9 mm. shaft screws (cortical profile):3.5mm: 22 mm 36 mm (2mm increments). shaft screws (cortical profile):3.6mm: 22 mm 36 mm (2mm increments). shaft screws should have 10 mm unthreaded portion rods must be of the following specifications: 3.5 mm ti rod: 80 mm, 120 mm and 240 mm lengths. 3.5 mm/5.0 mm ti rod, 120 mm/170 mm. 3.5 mm/6.0 mm ti rod, 120 mm/170 mm. trans-connector: 60 mm and 75 mm. short and long/left and right hooks. 3.5 mm ti transverse bar. the system should have occipital plate/rods options. should be quoted as a set of 4/6/8 screws with inner nuts and 2 rods. should provide undertaking to provide the instrumentation one day prior to surgery. price of transverse connectors and occipital plate with screws to be quoted separately., titanium mesh cage, fenestrated and hollow from inside to accept bone graft- all sizes (10-16mm dia, 80mm length)., titanium tlif banana cage - all sizes (6/8/10/12mm height, small/medium/large foot print), titanium expandable cage for cervical/ thoracic/ lumbar spine. misc sizes *, device for intervertebral assisted motion 8mm, 10mm, 12mm, 14mm *, titanium anterior staples 13 mm, 15mm, 17 mm, plif cage peek 7-14 mm, foot print 22-28 mm. 1 set consists of 2 pcs *, tlif cage peek 7-14 mm, foot print small/ medium/ large. 1 set consists of 1 pc *, laminoplasty spacer peek with 2 screws misc sizes *, kyphoplasty kit *, vertebroplasty kit *, absorbable haemostat (oxidized regenerated cellulose), sterile 1.25 x 5cm, hemostatic matrix plus flex tip (flowable haemostat)*, non- suture self adhesive artificial dural membrane (small / medium size), round tip diamond burr with long handle (2mm diameter) stryker, round tip diamond burr with long handle (3mm diameter) stryker, round tip carbide burr with long handle (3mm diameter) stryker, hydroxyapatite trapezoidal spacer (2cm x 1cm x 0.5cm) for cervical laminoplasty, titanium lateral mass/ pediclescrews set (4 screws 3.5mm and 2 rods and transverse connector) *, titanium cannulated lag screw for odontoid all sizes *

CTN :43020671

31 Dec, 2025 NA

Delhi - Delhi

Tender For tender for rate contract of orthopedic trauma implants - arthroplasty implants, proximal humerus locking compression plate (philos) 3.5mm, left/right set: 3 to 11 holes on shaft of plate with 9 locking screws 3.5mm (length-all sizes) and 6 cortical screws 3.5mm (length-all sizes), stainless steel., narrow 4.5 mm locking compression plates set: 6 to 14 holes (combihole design) with 4 cortical screws 4.5mm (length- all sizes) and 6 locking screws 4.5mm (length- all sizes), stainless steel., distal humerus anatomical locking plate set 3.5mm left/right (two plates- one medial and one lateral with 6 cortical screws and 8 locking screws, 4 to 8 holes on shaft of plate), stainless steel., extra articular distal humerus locking compression plate 3.5mm left/right set, with 4 to 12 holes on shaft of plate(combihole design), with 4 cortical screw(length- all sizes) and 8 locking screws (length all sizes), stainless steel., interlocking nails for humerus with provision for minimum 3 proximal and 2 distal locking screws (nail diameter 6-8mm, length 22-30mm), proximal radius anatomical locking plate set 2.4mm/2.7 mm, left/right for fixation of radial head and neck, 4 to 6 hole with 4 locking screws and 2 cortical screws, stainless steel., olecranon anatomical locking plate set (hook plate) 3.5mm, left/right, 4 to 8 holes on shaft of plate with 8 locking screws and 4 cortical screws, stainless steel., locking compression plate 3.5mm (combi-hole design) set 5 to 12 hole with 4 cortical screws and 4 locking screws, stainless steel., 1/3rd tubular plate set 3.5mm 4 to 12 hole with 8 cortical screws, stainless steel., 1/3rd tubular locking plate set 3.5mm 4 to 12 hole with 4 cortical and 6 locking screws, stainless steel., distal radius anatomical locking plate set (volar) 2.4mm/3.5mm left/right with 3 to 7 holes on shaft of plate, with 6 locking 2.4mm screws and 2 cortical 3.5mm screws and 4 locking 3.5mm screws, stainless steel., distal radius t locking plate 3.5mm set with 3 to 7 holes on shaft of plate with 6 locking screw and 4 cortical screws, stainless steel., distal radius t non locking plate set 3.5mm set with 3 to 7 hole on shaft of plate with 8 cortical screws, stainless steel., clavicle locking plate set 3.5mm right/left (6-8 holes) with corresponding screws, ss., headless compression screws 2.7mm, self-tapping, cannulated, length 10-40mm,titanium, headless compression screw 3.5mm self-tapping, cannulated, length 10- 50 mm, titanium, headless compression screw 4.5mm self-tapping, cannulated, length 10 60 mm, titanium., 1.5 mm cortical screws for fixation of small bones, low profile head, 8 to 16 mm length, star head, titanium *, 2.0 mm cortical screws for fixation of small bones, low profile head, 8 to 16 mm length, star head, titanium *, 2.4 mm cortical screws for fixation of small bones, low profile head, 8 to 16 mm length, star head, titanium *, radius intramedullary square nail set diameter 2.0mm to 4.0 mm and length 20 to 36mm, stainless steel., ulna intramedullary square nail set, diameter 2.0mm to 4.0 mm and length 20 to 36mm, stainless steel., 3.5mm reconstruction non- locking plate set 4 to 14 hole with 8 cortical screw, stainless steel, 3.5mm reconstruction locking plate set 4 to 12 holes with 4 cortical screw and 6 locking screw, stainless steel., 2.7mm reconstruction non locking plate set, 4 to 14 holes with 8 cortical screws, stainless steel., orthofix external fixator, size- l/m/s/es, ss, dynamic screw measuring 9mm, ilizarov ring fixator set for tibia: one set consisting of 10 half rings (120 mm to 220 mm), plus one 5/8 ring (120mm to 220mm), 10 ring connecting bolts, 12 threaded rods(100 mm to 400mm), eight 1.8mm ilizarov wires(trocar/bayonet tip), six olive wires, 30 slotted bolts (centric/eccentric/schanz screw holding), 120 full nuts, 10 washer, two male and two female posts(one to four holes), four schanz screw 4.5mm/5.0mm, two male hinge and two female hinge. instrumentation to be provided along with the set must

Central Government/Public Sector

CTN :43039737

11 Dec, 2025 NA

Harnaut - Bihar

Tender For supply of hrc fuse link, bolted type, off set tag, size- a2, rated capacity- 6 amp, breaking capacity - 80ka, rated voltage 500 v ac; conforming to is: 13703 (part-2/sec-1)-1993/iec 60269-2-1