Latest load bearing equipment Tenders | Government load bearing equipment Tenders

Central Government/Public Sector

CTN :39788167

28 Mar, 2025 NA

Chennai - Tamil Nadu

Tender For design, supply, and installation of retractable tip up jump seat for inspection official in wap7 locomotive cab mounted on driver desk center cabin space with easy deployment and retraction, with a se cure locking mechanism to ensure stability as per the following specification and sketch attached: 1) seat : height 500 mm x width 400 mm x depth 400 mm x thickness 90-100 mm, 2) back rest: height 600 mm x width 400 mm x thickness 80 mm, 3) support structure: made up of seat component and pipe 30 mm squ are and flats, 4) locking mechanism: manual lever type, 5) upholstery: dobby fabric black/dark brown, 6) r etractable base mechanism: manual push pull lift, 7) material specification: is 2062, 8) paint finish: powder coated black, 9) safety standards: as per norms. note:- the seat shall be ergonomically designed for comfo rt and safety, with a durable frame capable of withstanding the operational conditions within the locomotiv e. the seat shall be space-efficient, folding neatly when not in use, to maintain cab functionality. retractabl e base shall be suitably fixed on the driver cabin center on the surface level without any raise in platform h eight. it shall meet all safety standards and be compatible with the existing structure of the wap7 locomoti ve cab driver desk. the seat's material and finish shall be resistant to wear and tear, ensuring long-term rel iability and performance. make: vijayjyot or f. i. s. a. srl or volvo. [ warranty period: 30 months after th e date of delivery ]

Co-operative

CTN :39689749

24 Mar, 2025 48.0 Thousand

Mehsana - Gujarat

Tender For supply of goggle and gloves safety wear - 3049465, 150.000, poly carbonate flexible temples with side shield and vent. frame less fit over spectacles. can be worn over with other spectacles. poly carbonate material 99.9 percentage uv protection make- venus, model - e603, 3049470, 150.000, safety-wear,hand gloves,cotton,free size

CTN :39430563

25 Mar, 2025 5.87 Crore

Uttara Kannada - Karnataka

Tender For corrigendum : procurement of of distilling plant spares - tender for supply of filter/regulator incl pr gauge , set of manometers for pump , thermometer , temp transmitter pt100 , butterfly valve , t-piece with flange & skt hwlm 35-60 , t-piece with flanges hwlm 35-60 , fastening bow hwl 35-60 , regulating valve dn65 pn25 , steam trap dn40 incl cert , butterfly valve type 2232 , gasket dn100 162115 1 5mm , gasket 127 77 x 15 mm , screw , screw , screw m1660 din933 , screw , screw , washer , washer m16 din 125 a , washer , set of manometers for pump , nut , nut , nut m20 din 934 , gasket 9249 x 15 , air valve 14 bsp bronze , washer , shaft complete , impeller 180 , o-ring , mechanical seal 35 , seal ring , wear ring - upper , washer , spring washer , screw , screw , screw , screw m12x30 , plug , key , washer , plug 1-4 bsp , motor w22 15-18kw 50/60hz gl 3 phase , ball bearing , ball bearing , cover incl item 7 9 25 , base , impeller 192 , o-ring 215 49 x 3 53 , wear ring incl screws , wear ring incl screws , spring washer , washer , screw , screw , plug 38 bsp , plug 1-4 bsp , key 8 x 7 x 30 , cip unit for aqua fwg 220-230v , aqua ii rubber sleeve sw out , pvc hose with steel coil , hexagon nipple , sticker safety signs , plate p36-ti-0.6-nbrb-es , plate p36-ti-0.6-nbrb-ev 55 , plate p36-ti-0.6-nbrb-ed , plate p36-ti-0.6-nbrb-ee ke , plate p36-ti-0.6-nbrb-ks , plate p36-ti-0.6-nbrb-kv , plate p36-ti-0.6-nbrb-kd , plate p36-ti-0.6-nbrb-ev 10 , clamping bolt l1-450 mm , motor w22 71 -2 220-480v , name plate fwg , feedwater injection , set of manometers for pump , coil solenoid valve ev220 230v , zinc anode , diaphragm , pressure gauge 0-3bar 1-44 bsp , pressure gauge 0-10bar 1-4 bsp , nozzle 3 dn100 id 49 9 , shaft incl keyscrews washer , impeller 156 , water meter efw 4 incl unions , flowmeter with reg valve , orifice d 13 9 , pressure gauge 63 -1-5bar , compound gauge -1-2bar , pressure gauge 63 -1-5 bar , electrode for ds-20 , thermometer boiling temp , non-return valve w sight glass , safety valve 1bsp , ball valve 1-2bsp , spring loaded valvemvf-40-2.5 , spring loaded valve mv-25-1.2 , non-return valve 1 bsp , ball valve 1-2bsp , ball valve 1 bsp , non-return valve 3-8 bsp , compound gauge 2bar 3-8 bsp , butterfly valve , ball valve 3-8 bsp , seat valve , impeller 149 , gasket pvvf 2040 , shaft complete , screw , screw m5x 8 din 916 , seal ring60x 50x12mm , plug 1-8 , key 4 x 4 x 15 key 4x4x15 , screw m5x16 din7991 , mechanical seal 16 nitrile , washer iso 6831386 , solenoid valve 1230v 50-60 cs , coil for solenoid valve , spare part kit diaphragm nc1-2 , motor w22 80 50-60hz gl 3-phase , ball bearing , ball bearing , motor w22 16050-60hz gl 3-phase , main switch ot80f3 , door handle ohbs2aj , shaft oxs6x160 , thermal relay 3ru2126-4pb0 , thermal relay 3ru2126-4eb0 , thermal relay 3ru2116-1db0 , mcb s202m-c10 10a - 2p , mcb s202m-c1 1a - 2p , green led lamp cl2-523g , contactor 3rt2028-1al20 , auxiliary contact 3rh2911-1ha21 , push button cp110r-01 red , push button cp110g-10 green , contactor 3rt2027-1al20 230vac , contactor 3rt2015-1ap01 230vac , led lamp cl2-523c white , control valve gland packing , control valve gasket , control valve baffle plate , control valve actuator , dsh body seal kit , dsh actuator , pump o ring kit , pump shaft seal kit , pump wear parts kit , temperature transmitter , temperature gauge , pressure gauge- inlet , pressure gauge- outlet , pid controller for prs , pressure transmitter , pid controller for dsh

Central Government/Public Sector

CTN :39679584

24 Mar, 2025 NA

Medak-T - Telangana

Tender For custom bid for services - offloading of buffing polishing of km ucc-buffing & polishing of the following k-m ucc components is to be carried out at ep shop, as and when required (on load availability basis) as per the instructions of officer-incharge- 1.1. buffing and polishing of above components as per the process, prescribed by the methods dept.. 1.2. operation sequence: corresponding polishing fixtures are to be loaded on to the polishing m/c. components are to be cleaned before the commencement of the operation. 1.3. the polishing pad 3m-birla/ cloth wheel is to be used for the operation. 1.4. wear the safety items like goggles, gloves, apron, and helmet etc. before commencement of the buffing and polishing operation. 1.5. switch on the machine and carryout the buffing & polishing operation. 1.6. scratches & dents are not acceptable. 1.7. ensure that the surface finish is as per the master component/specimen and follow the instructions of officer ep-in-charge . 1.8. all the consumables will be provided by bdl. list of components sl. no com.no com. description opn. no 1 9m113m.01.05.811 cap 2 9m113m.01.05.804 spacer 3 9m113m.01.00.806 bushing.

Central Government/Public Sector

CTN :39663903

04 Apr, 2025 NA

Chennai - Tamil Nadu

Tender For supply of 25 kw brushless alternator with other accessories (excluding electronic rectifier-cum-re gulator unit or rectifier-cum-regulator unit) conforming to rdso specification no. rdso / pe / spec / a c /0056-2014 (rev.1). the accessories shall be as per drawings listed below (a) alternator pulley shall be as per rdso drawing no. skel 3645 (rev.4) 2014. (b) axle pulley shall be as per rdso drawing no . skel 3652 alt.3 (c) rubber pad shall be as per rdso drawing no. skel 4021 alt.2 (d) safety chain sh all be as per rdso drawing no. skel 4022 alt.3 (e) suspension hanger pin with split cotter and washe r shall be as per rdso drawing no. skel 3943 (rev.2) 2016, alt. 1 (f) belt tension device with indicato r plate cut to 250 mm length shall be as per rdso drawing no. skel 3940 sheet 1 alt.5 and sheet 2 al t.5. (g) terminal board shall be as per rdso drawing no. rdso / pe / sk / ac /0047-2003 (rev.4) (h) m odified spring shall be as per drawing no. rdso / pe / sk / ac /0068-2004 (rev.0) (i) wear resistant nyl on bush shall be as per rdso drawing no. rdso / pe / sk / tl / 0086 - 2014 (rev.2) alt.1. make accept able: hmtd, ice, kel, kel-eml, pds, presstech & stesalit. oem or authorised dealers only to quote with documentary evidence. (warranty as per irs condition) [ warranty period: 30 months after the date of delivery ]

CTN :39553700

24 Mar, 2025 NA

Bardhaman - West Bengal

Tender For supply of mix safety items - compound wear-abrsn rstnc,resin-hrdnr , blower elec prtbl,220v 50hz,600w plastic , adhesive anabond666t,pckt,100g , cleaner elec cntct rust , brush crbn,50x30x20mm , brush crbn,35x40x20mm , crimping tools size 6 sq mm to 400 sq mm , tester tong,0-1000a,660v , wrench adjstbl 300mm , wrench impact 1355ft-lb, , oil crbn soot,rust rmvr,ru ora 7 , tap set threading tape, , adhesive anabond 112, anaerobic , brush crbn,37x25x20mm

CTN :39529635

24 Apr, 2025 NA

Rishikesh - Uttarakhand

Tender For goods and services for supply of personal protection equipment in haridwar and rishikesh in uttarakhand under package 10 f - tripod stand with wench for confined space entry supply of goods and related services for each unit of this item, which shall comply with the requirements and technical specifications of the contract, for delivery to the final destination. the rate for the supply of goods and related services for each unit of this item shall cover all of the costs for the following:(a) supply of goods: tripod stand with wench for confined space entry: tripod stand for raising, lowering and supporting personnel in confined space entry (manhole) and emergency response situations, complete with winching device, winching cable and built-in pulley system; and(b) related services: inspections and tests, user s manuals and initial user training, after delivery to final destination. performance tests shall be carried out by the supplier for each unit at the final point of delivery. users manuals and initial user training shall be provided by the supplier for each unit at the final point of delivery., safety harness full body belt supply of goods and related services for each unit of this item, which shall comply with the requirements and technical specifications of the contract, for delivery to the final destination. the rate for the supply of goods and related services for each unit of this item shall cover all of the costs for the following:(a) supply of goods: safety harness full body belt: polypropylene nylon full body safety belt harness for purpose of fall arrest, positioning, travel restraint, suspension and rescue applications. each unit to be provided with rope grab fall arrester, rope double hook shock absorber lanyard, full body harness, twisted nylon rope with metal fastening rings at each end, anchorage line tool bag, work positioning lanyard, accessory rings and kit bag; and(b) related services: inspections and tests, user s manuals and initial user training, after delivery to final destination. performance tests shall be carried out by the supplier for each unit at the final point of delivery. users manuals and initial user training shall be provided by the supplier for each unit at the final point of delivery., safety rubber gum boots with steel toes (pair) supply of goods for each unit of this item, which shall comply with the requirements and technical specifications of the contract, for delivery to the final destination. the rate for the supply of goods for each unit of this item shall cover all of the costs for the following:supply of goods: safety rubber gum boots with steel toes (pair): each unit shall comprise one (1) pair of water proof and anti-slip; chemical, oil and acid resistant; puncture and tear resistant; gum boots with high knee safety designed for maximum safety. reinforcement at the heel, ankle and shin. boot sizes range: 5 to 11 uk size (supplied in 1:2:2 proportions)., safety rubber gloves (pair) supply of goods for each unit of this item, which shall comply with the requirements and technical specifications of the contract, for delivery to the final destination. the rate for the supply of goods for each unit of this item shall cover all of the costs for the following:supply of goods: safety rubber gloves (pair): each unit shall comprise one (1) pair of gloves. cut resistant safety gloves with good wear comfort, chemical resistance., safety helmet (standard) supply of goods for each unit of this item, which shall comply with the requirements and technical specifications of the contract, for delivery to the final destination. the rate for the supply of goods for each unit of this item shall cover all of the costs for the following:supply of goods: safety helmet (standard): safety helmet shall be compliant with indian standard is 2925,1984. shell shall be dome shaped, no metallic components are to be used. helmet material: uv resistant hdpe thermoplast. helmet suspension: six-point plastic head

CTN :39538711

24 Mar, 2025 NA

Barnala - Punjab

Tender For supply of d related armament ite - blasters ohmmeter 0-200 ohms , 9 volt cell for blasters ohmmeter , eod ballastic protection eye wear , repeater for portable vhf synthesiser transreceiver , still camera digital with stand , digital video camera with stand , portable vhf synthesiser transreceiver , pipe adjustable wrinch large , alluminium foil , hand held gps , seat cutter , gloves , eod wrist watch , 9v 9ah battery for blasting machine , eod folding pocket knife , micro ringing single pulley , cream scrubber , hand crank plastic wheels , plastic vials , rigging rope , tinmen snip straight and bent , hydration back pack , iron stacks , parachute chord , multipurpose water pump for above and under water , banners bd team , dry cell , seats timer , mono filament tape 1 inch , electrical wire , friction tape , bungee chord , protector , safety digital multimeter , d91 items , drift copper , scratch card , digital thermometer , nut sequenzer , guages detonator cavity

Load Bearing Equipment Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Co-operative

Central Government/Public Sector

Central Government/Public Sector