Latest lock sets Tenders | Government lock sets Tenders

Central Government/Public Sector

CTN :40700994

23 Jun, 2025 NA

Ambala - Haryana

Tender For supply of locking arrangement of uncoupling rod as per rdso drg. no. wd-00046-s-01, alt-7. [ warranty period: 30 months af ter the date of delivery ]

Central Government/Public Sector

CTN :40681855

18 Jun, 2025 NA

Kota - Rajasthan

Tender For supply & fitment of swivel type locking arrangement with chain & pin in saloon sliding door s of lwfac of ss 304 material as per rcf- cai/rcf/mech/lhb/062 (25x25x5 flat ss. ss pin & chain ss sheet lock cover with fitting also to be included) material required as per rcf drawing & specification. nabl certification required for material confirmation as per drawing .(warranty period up to 30 months from the date of supply) [ warranty period: 30 months after the date of delivery ]

Central Government / Public Sector

CTN :40700834

16 Jun, 2025 NA

Secunderabad - Telangana

Tender For supply of disconnecting and earthing device, 8 pole, 2 way without off, on load 125 amps at 1000 v ac, 2 no+ 2nc and with heavy handle and pad locking arrangement in one position mounted in a stainless steel enclosure suitable for ac 23 duty confirming to iec 60947, max depth including handle 480 mm for lhb ac coaches as per rdso spec. no. rdso/pe/spec/ac/0184-2015 (rev.1) or latest, rdso/pe/sp ec/ac/0192-2018 rev.0 or latest & rdso/pe/spec/ac/0200-2020 rev.0 and rdso letter no. el.71.1.108/mssbc, dt. 17.09.21 & 11.10.2022 or latest. [ warranty period: 30 months after the date of delivery ]

Central Government / Public Sector

CTN :40702168

17 Jun, 2025 NA

Secunderabad - Telangana

Tender For supply of dual flush valve of 32mm inlet and outlet diameter (push button round plate) with outer cap locking facili ty with allen screw as anti theft arrangement of make: jaquar model no. flv-chr-1085sq or marc model no.mac-3080 or e ss ess model no.e251c or equivalent with 10 years warranty of oem's certification. [ warranty period: 30 months after the da te of delivery ]

CTN :40699078

04 Jul, 2025 NA

Kanchrapara - West Bengal

Tender For supply of earthing switch for vcb with locking arrangement as per specn.no.clw/es/3/001 0/d. [ warranty period: 30 months after the date of delivery ]

CTN :40713114

07 Jul, 2025 NA

Mumbai - Maharashtra

Tender For purchase of ms hinges, pillar locking arrangement, ms clamp (gland patti), pillar key

Central Government/Public Sector

CTN :40351999

19 Jun, 2025 NA

Numaligarh - Assam

Tender For corrigendum : supply of plug valves for ag and ug piping for msb, pfcc, gds and ff for nrep as per technical specifications for numaligarh refinery limited, assam, india - group-1 (group wise evaluation)supply of plug valve for ag+ug piping for nrep project including tpi charges as specified in material requisition., plug valve cs (caustic), 150,0, api 599, flgd,b16.5, rf, lo,non lubricated,tapered plug, regular pattern, fire safe, with locking arrangement, all welds shall be subjected, to pwht., with anti-static device., a105n / a216 gr.wcb, plug ss 316, sleeve rptfe, gf ptfe wedge ring, diaphragm rptfe+ss316 backup, graphite cover seal, a193 gr.b7/a194gr.2h, thrustcollar ss 316, add. information, documents to be followed, tk-1zzza-pi-spe-0005,tk-1zzza-pi-spe-0006,, tk-1zzza-pi-spe-0008,tk-1zzza-pi-spe-0009, and in-042, vendor to submit pressure-temp., rating chart, design pressure1 14.5 kg/cm2(g), design temperature1 70 deg.c, design pressure2 3.5 kg/cm2(g), design temperature2 200 deg.c, valve shall be suitable for, bi-directional flow & pressure shutoff, valve shall be tested in preferred and, non preferred flow direction., preferred flow direction shall be marked., sleeve to be checked for, process data and alternative to be, specified if not suitable., plug valve cs (caustic), 150,0, api 599, flgd,b16.5, rf, lo,non lubricated,tapered plug, regular pattern, fire safe, with locking arrangement, all welds shall be subjected, to pwht., with anti-static device., a105n / a216 gr.wcb, plug ss 316, sleeve rptfe, gf ptfe wedge ring, diaphragm rptfe+ss316 backup, graphite cover seal, a193 gr.b7/a194gr.2h, thrustcollar ss 316, add. information, documents to be followed, tk-1zzza-pi-spe-0005,tk-1zzza-pi-spe-0006,, tk-1zzza-pi-spe-0008,tk-1zzza-pi-spe-0009, and in-042, vendor to submit pressure-temp., rating chart, design pressure1 14.5 kg/cm2(g), design temperature1 70 deg.c, design pressure2 3.5 kg/cm2(g), design temperature2 200 deg.c, valve shall be suitable for, bi-directional flow & pressure shutoff, valve shall be tested in preferred and, non preferred flow direction., preferred flow direction shall be marked., sleeve to be checked for, process data and alternative to be, specified if not suitable., plug valve cs (caustic), 150,0, api 599, flgd,b16.5, rf, lo,non lubricated,tapered plug, regular pattern, fire safe, with locking arrangement, all welds shall be subjected, to pwht., with anti-static device., a105n / a216 gr.wcb, plug ss 316, sleeve rptfe, gf ptfe wedge ring, diaphragm rptfe+ss316 backup, graphite cover seal, a193 gr.b7/a194gr.2h, thrustcollar ss 316, add. information, documents to be followed, tk-1zzza-pi-spe-0005,tk-1zzza-pi-spe-0006,, tk-1zzza-pi-spe-0008,tk-1zzza-pi-spe-0009, and in-042, vendor to submit pressure-temp., rating chart, design pressure1 14.5 kg/cm2(g), design temperature1 70 deg.c, design pressure2 3.5 kg/cm2(g), design temperature2 200 deg.c, valve shall be suitable for, bi-directional flow & pressure shutoff, valve shall be tested in preferred and, non preferred flow direction., preferred flow direction shall be marked., sleeve to be checked for, process data and alternative to be, specified if not suitable., plug valve cs (caustic), 150,0, api 599, flgd,b16.5, rf, lo,non lubricated,tapered plug, regular pattern, fire safe, with locking arrangement, all welds shall be subjected, to pwht., with anti-static device., a105n / a216 gr.wcb, plug ss 316, sleeve rptfe, gf ptfe wedge ring, diaphragm rptfe+ss316 backup, graphite cover seal, a193 gr.b7/a194gr.2h, thrustcollar ss 316, add. information, documents to be followed, tk-1zzza-pi-spe-0005,tk-1zzza-pi-spe-0006,, tk-1zzza-pi-spe-0008,tk-1zzza-pi-spe-0009, and in-042, vendor to submit pressure-temp., rating chart, design pressure1 14.5 kg/cm2(g), design temperature1 70 deg.c, design pressure2 3.5 kg/cm2(g), design temperature2 200 deg.c, valve shall be suitable for, bi-directional flow & pressure shutoff, valve shall be tested in pref

Central Government / Public Sector

CTN :40681503

09 Jul, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of 18 feet multi utility ladder, in four modules, complete with auto locking ratchet arrangement with ru bber shoes and rubber caps ,easy to transport compact, detailed specification as per attached annexure. [ warran ty period: 24 months after the date of delivery ]

CTN :40659244

14 Jul, 2025 NA

Kharagpur - West Bengal

Tender For supply of bearing piece assembly with locking arrangement for single piece uncoupling gear. dra wing no. : rdso s drg. no-wd-00046-s-01, alt. 7 , consisting of item-4,5,6,and 7 (4, 6, 7 one number each and 5 two numbers). (locking arrangement to be supplied in welded condition with bearing piec e assembly and one no. of item no. 5 i.e. washer to be supplied in loose condition with assembly) mat erial and specification : is: 2062:2011(rev. 7), amend. no. 1 of nov. 2012, grade- e250a [ warranty period: 30 months after the date of delivery ]

CTN :40521848

14 Jun, 2025 NA

Delhi - Delhi

Tender For corrigendum : repair, maintenance, and installation of plant/ systems/equipments (version 2) - office space; supply installation commissioning of equipments and devices for storage; buyer-providing compactors made out of 0.8mm thick crca steel conforming to is: 513 gr. d each unit have 4 loading levels formed by 3 nos . adjustable shelves . body units are bolted to under carriage . optimizer height form ground is 2080 mm (1980 body + 65 undercarriage +35 channel system) the body i /c shelves are given antirust surface treatment & are powder coated with epoxy polyester powder. it involves treatment consisting of hot water rinse. knock of degreasing, cold-water rinse, phosphating ,cold water rinse , passivation & dry off oven treatment. final finish consists of epoxy polyester powder coating of approved color & shade with a dry film thickness of minimum 40 microns . the testing of paint is done for various physical & chemical properties as per is: 101. the material is the oven backed with a controlled temperature of 180 deg. c . to 200 deg . c. it is made of 0.8 mm thick crca steel conforming is is : 513 gr . d or dd its max load bearing capacity is 80 kg uniformly distributed per shelves are mounted on support bracket & shelf level can be adjusted at approx. 25.4 pitch . there are 3 adjustable shelves per body given per body given 4 loading levels , if bi cradle pair is provided the under carrying is a welded frame made of hr sheet 3.15 mm thick conforming to is : 10748 suitably fabricated to take the loads based on configuration . a centralized locking arrangement is provided through locking stiffener mounted on to back of single last unit so that it gets locked on channels when all the units are brought together. 10 bodies.

Lock Sets Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector

Central Government / Public Sector

Central Government/Public Sector

Central Government / Public Sector