Latest locking plate Tenders | Government locking plate Tenders

Central Government/Public Sector

CTN :40003522

21 Apr, 2025 NA

Multi City - Multi State

Tender For supply of (ami no.23s14/25-26) cervical spine locking plate single level with 4 locking screws

State Government

CTN :39961282

21 Apr, 2025 21.02 Lacs

Anuppur - Madhya Pradesh

Tender For procurement of clamping piece and locking plate for lp turbine of 210 mw atps mppgcl chachai.

Central Government And Public Sector

CTN :39978436

01 May, 2025 34.81 Lacs

Kaiga - Karnataka

Tender For supply, fabrication, welding/joining, erection and testing of hdpe piping from kgs 3 and 4 to kaiga 5 and 6 area. - supply items (schedule-a), 100 nb equal tee sch 40 astm a 234 gr. wpb sml bw ansi b 16.9, 1oo nb sorf flange 150 # astm a 105 ansi b 16.5, 100 nb blind flange 150 # astm a 105 ansi b .16.5, 100 nb gate valve manual op. flange end 125/150 # sa 216 gr. wcb ansi b 16.34, 100 nb ball valve manual op. flange end 125 /150# hdpe, suit to 100 nb,sa 105, 150 # ansi b 16..5 back ring flange, flange end mechanical type flow totalizer 150# (range 150000 to 200000 cu. mtr.capacity) to suit to 100 nb sa 105 flange 150 #, ansi b 16.5. flow meter totaliser specification, dn-110 hdpe pipe is 4984 gr. pe 80 pn 6, dn-110 hdpe 90 degree elbow, is 4984 gr. pe 80 pn 6 as per is 8008, dn-110 pipe /stub end, 1s 4984 gr pe 80 pn 6 as per is 8008., 100 nb cs back ring flange astm a 105 as per ansi b 16.5 150#, dn-110 hdpe equal tee, is 4984 gr.pe 80 pn 6, as per is 8008, dn-50 hdpe cap, is 4984 gr. pe 80 pn 6, as per is 8008., hexagonal headed bolt, nut with washer 85 mm long is 1363 gr. 6.3 /is 3757 gr. 8.8, ismc 100 is 2062 , e 250 gr. a, 12 mm thick plate is 2062 , e 250 gr. br, 110 nb ms u clamp 25 mm wide x 3.5 mm thick, 100 nb m 12 u bolt is 2062 e 250 gr. a, m 10 x 100 hst/faz, 1.6 mm thk caf gasket 100 nb is 2712 gr. w/3, erection item (schedule-b), butt fusion welding / joining and laying of dn- 110 hdpe pipe, is 4984, grade pe 80, pn 6 both under ground and above ground., butt fusion welding / joining and erection of dn-110 90 degree elbow, hdpe, is 4984, grade pe 80. pn 6 ( inclusive of welding/fusion of both end), butt fusion welding / joining and erection of dn-110 hdpe equal tee, is 4984, grade pe 80. pn 6 ( inclusive of welding/fusion of three end), butt fusion welding / joining and erection of dn-110 hdpe pipe end /stub end is 4984, grade pe 80. pn 6, butt fusion welding/joining and erection of dn-50 hdpe cap is 4984 grade pe-80 pn-6, installation of 100 nb hdpe ball valve without welding., fabrication , erection , welding, inspection,surface cleaning & supply and application of hb chlorinated rubber zinc phospate primer paint in two coats to minimum 100 micron dft and supply and application of hb chlorinated rubber finish paint in two coats to 60 micron dft for cs structural steel support and components., installation of anchores m10 x 100 mm hst/faz including handling,scafolding,labour & tools., removing & reinstallation of precast concrete slab 0.3 m (l) x 1.350 m (w) x 0.1 m (t), excavation and backfilling of excavated trenches with the soil after completion of installation of pipe lines and testing including levelling/grading, compaction to the required level 1.5 m (d)x 0.8 m (w), sand bedding 50 mm depth x 400 mm width for underground hdpe piping including supply of sand., dismantling of existing dn-50 hdpe piping including breaking of existing cement concrete ( 0.7 cub.mtr) & pcc to be done after breaking and removing of existing cement concrete, including tools, labour & disposing of unservicable material as directed by eic, carefully removing the korean grass along with soil of 100 mm to 250 mm depth and 1500 mm width including replacing the same removed korean grass along with soil after laying hdpe line along with tools & tackles,watering of grass,dressing of area etc.in all complete as per direction of eic

CTN :39985945

01 May, 2025 NA

Uttara Kannada - Karnataka

Tender For tender for supply of blowing valves - o-ring 14x1.8 20a8 , o-ring 18x1.8 20a8 , o-ring 30x2.65 20a8 , o-ring 85x3.55 20a8 , o-ring 100x3.55 20a8 , o-ring 125x5.3 20a8 , counter valve , locking plate m425-0259f5 , lock tab washer m425-0259f7 , ruch union mobile part with built in nrv for main balast tan , nrv plug

CTN :39985949

06 May, 2025 NA

Ernakulam - Kerala

Tender For tender for supply of nut m6x1 grpoint8 , nut m24x25 grpoint8 , stud m12x1point75x45 8point8 , stud , self locking nylock nut m10 , self locking nut , allen screw , socket head cap screw m12x55 12point9 , allen screw , circlip , circlip external , circlip external 45 mm , circlip , circlip external 60mm , circlip external 65mm , circlip external 90 mm , circlip internal 90mm , banjo bolt , plain machined washer m10 , copper washer 10x14 , copper washer , copper washer 12x16 , copper washer 12x18 , copper washer 14x18 , washer copper , copper washer 81x22 , copper joint , washer copper , washer copper , joint , copper washer , copper washer 30x36 , washer copper , copper washer 60x68 , schnor washer , ball , spring dowel pin , mech dir pin , spring dowel pin , spring dowel pin , spring dowel pin 17x30 , intermediate ring , round seal ring , round seal ring , inlet valve , o ring giesunger coupling , ring ms 29513 126 60c7 nse 6point531 , gasket for glacier filter gf600 11 , set of seal for glacier filter , rocker arm bush , o ring an33 7pb 496 , disc spring washer , locking plate , piston ring , locking disc , locking plate , gasket ring , gasket ring , gasket pn16 dn100 type 01a , cover with gasket ring , gasket ring , o ring , hex headed screw , hex headed screw , gasket , gt2 coalescer filter panel , seal tape roll , spares kit contg bearing mech seal gas o ring and rv spr , main bearing assly , shim , thrust bearing reinforced , bearing opppointside to timing gear , bearing , pinion , serrated shaft , gov driving gear pinion , ball bearing skf 6212 , ball bearing skf 6209 , pair of bevel gears , shim , cup plug , serrated bush , oil seal , pair of bevel gears , shim

CTN :39975958

05 May, 2025 NA

Patiala - Punjab

Tender For supply of locking plate for wheel and axle.

Central Government / Public Sector

CTN :39975584

17 Apr, 2025 NA

Bhubaneswar - Odisha

Tender For supply of locking plate for anchor link screws, to drawing/specification icf drg. no. t-0-7-610,alt. e/11

Central Government/Public Sector

CTN :39809665

25 Apr, 2025 NA

Nashik - Maharashtra

Tender For corrigendum : supply of osaero job work for manufacturing of 238 parts as a package ref semfg573 - channel(sta#1c-#1d) , doubler-lh(sta#1b-1c) , doubler-rh(sta#1b-1c) , zee member-lh , zee member-rh , strip - lh , strip - rh , frame-lh side(sta#1d) , frame -lh (sta#1c) , frame -lh (sta#1b) , frame -rh (sta#1b) , frame -rh (sta#1c) , frame-rh side(sta#1d) , stiffener-unfeathering pump , floor stiffener-aft(oil , accumulator , lh channel (sta#5-#6) , lh channel (sta #5 - #6) , lh doubler (sta #5 - #6) , lh channel (sta #11- #12) , lh channel(sta #11-#12) , lh stiffener-top(sta#8-#10) , lh channel(sta#10-sta#11) , partition floor(baggage , compartment , stringer top-rh(sta#4-#5) , stringer top-rh(sta#5-#6) , stringer top-rh(sta#6a-#8) , stiffner , stiffner , aux.frame(bottom)sta#16 , doubler-lh(longeron)(#18-#19) , doubler-rh(longeron)(#18-#19) , stringer (sta#17-sta#18) , stringer(sta#6-#7) , rh stringer(sta#2-#3) , bottom skin-lh(sta#14-sta#19) , doubler(sta#5-sta#6) , doubler(sta#1-#1a)-lh-ecs cover , doubler(sta#1-#1a)-rh-ecs cover , doubler-top-rh(sta#1-#1a) , shear wall aft-lh , lh-bottom frame(sta#6) , splice strap(sta#7)-lh , shear wall aft-rh , bottom frame(sta#6)-rh , stringer , lh sealing member , support bracket - (sta#1-#2)-lh , support bracket-sta#1-#2)-rh , channel(uplock bracket)-lh , channel(uplock bracket)-rh , zee stiffener(sta#4) , stiffner(sta#1-#2) , stiffener-rh(sta#12) , rh stiffener(sta#11) , lh stiffener(sta#12) , lh crimped doubler(#9-#10) , stiffner- lh (x=2349) , stiffner -rh (x=2603) , stifffner- lh (sta#12) , stiffner-lh(sta#11) , stiffner-rh(sta#x=2123.5) , stiffner-rh(x=2349) , channel-bottom floor , channel-bottom floor , stiffener bottom floor (sta#17) , channel-bottom floor , channel-bottom floor , lh crimped doubler(#9-#10) , stiffner (sta #4-#5) , lh floor sheet(sta #9-#10) , channel bot.-lh (sta #1-#2) , b channel bot.-lh (sta #1-#2) , b channel bot.-rh (sta #1-#2) , lateral channel (sta #1-#2) , channel bot.-rh (sta #1-#2) , cover plate (sta.#8 to #9) , battery shield sheet(sta#2) , channel top (sta#1a-#1) , cover , top frame(sta#10,x=2226) , bottom frame(sta#10,x=2226) , top frame(sta#11) , bottom frame (sta#11) , top frame(sta#12,x=2735) , bottom frame(sta#12,x=2735) , frame-lh(sta#18) , strip(sta#18) , inner plate(stepway) , plate-storage pouch rc , plate-storage pouch , top support , pouch plate rc - lh , pouch plate - lh , top supprt , bot. butt strap-fairing-lh , bot. butt strap-fairing-rh , butt strap(aft fairing)-lh , butt strap(aft fairing)-rh , doubler (fcs) -lh(#22-#23) , doubler (fcs) -rh(#22-#23) , skin-lh(sta#25-sta#26) , skin-rh(sta#25-sta#26) , channel-(iff ant.)(#19-#20) , doubler-lh(longeron)(#19-#20) , doubler-rh(longeron)(#19-#20) , doubler-lh(longeron)(#19-#20) , doubler-rh(longeron)(#19-#20) , splice strip-bottom , (sta#22)(x=5515 , rh-doubler (sta #1-#2) , scoop-oil cooler , rear scoop(oil cooler) , oil cooler duct-extension , hat stiffener-lh(sta#1b) , hat stiffener-rh(sta#1b) , stiffener(cover)-aft , stiffener(cover)-aft , doubler-lh , doubler-rh , stiffener(cover)-rh fwd , generator scoop-flange , generator scoop , rear scoop(generator cooling) , duct-top , duct-bottom , lh cover(hyd. di)(#18-#19) , stiffner-lh(#17-#18) , lh-cover(dcdb)(#17-#18) , vertical stifffener , stiffner(sta#18-sta#19) , ecs cover-rh(sta#1-#1a)) , lh-cover (sta#1a-#1) , lh doubler (sta#1a-#1) , side cover-rh , side doubler-rh , doubler(sta#14-sta#16) , rh-cover(#25 - #26) , lh-cover (gpu)(#19-#20) , outer strip side -lh , outer strip side -rh , channel-center(lh side frame) , channel-center(rh side frame) , nose rib sta#3 , nose rib sta#3 , nose rib sta#4 , nose rib sta#4 , nose rib sta#5 , nose rib sta#5 , nose rib sta#6 , nose rib sta#6 , nose rib sta#9 , nose rib sta#9 , nose rib sta#10 , nose rib sta#10 , nose rib sta#11 , nose rib sta#11 , i/s rib #3 center , i/s rib #3 center , o/b stringer #7 (top) , o/b stringer #7 (top) , shroud skin#3 , shroud skin#3 , shroud skin #4 , shroud skin

Central Government/Public Sector

CTN :39809671

25 Apr, 2025 NA

Nashik - Maharashtra

Tender For corrigendum : supply of osaero job work for manufacturing of 317 parts as a package ref semfg572 - channel(sta#1c-#1d), doubler-lh(sta#1b-1c), doubler-rh(sta#1b-1c), zee member-lh, zee member-rh, strip - lh, strip - rh, frame-lh side(sta#1d), frame -lh (sta#1c), frame -lh (sta#1b), frame -rh (sta#1b), frame -rh (sta#1c), frame-rh side(sta#1d), stiffener-unfeathering pump, floor stiffener-aft(oil, accumulator, lh channel (sta#5-#6), lh channel (sta #5 - #6), lh doubler (sta #5 - #6), lh channel (sta #11- #12), lh channel(sta #11-#12), lh stiffener-top(sta#8-#10), lh channel(sta#10-sta#11), partition floor(baggage, compartment, stringer top-rh(sta#4-#5), stringer top-rh(sta#5-#6), stringer top-rh(sta#6a-#8), stiffner, stiffner, aux.frame(bottom)sta#16, doubler-lh(longeron)(#18-#19), doubler-rh(longeron)(#18-#19), stringer (sta#17-sta#18), stringer(sta#6-#7), rh stringer(sta#2-#3), bottom skin-lh(sta#14-sta#19), doubler(sta#5-sta#6), doubler(sta#1-#1a)-lh-ecs cover, doubler(sta#1-#1a)-rh-ecs cover, doubler-top-rh(sta#1-#1a), shear wall aft-lh, lh-bottom frame(sta#6), splice strap(sta#7)-lh, shear wall aft-rh, bottom frame(sta#6)-rh, stringer, lh sealing member, support bracket - (sta#1-#2)-lh, support bracket-sta#1-#2)-rh, channel(uplock bracket)-lh, channel(uplock bracket)-rh, zee stiffener(sta#4), stiffner(sta#1-#2), stiffener-rh(sta#12), rh stiffener(sta#11), lh stiffener(sta#12), lh crimped doubler(#9-#10), stiffner- lh (x=2349), stiffner -rh (x=2603), stifffner- lh (sta#12), stiffner-lh(sta#11), stiffner-rh(sta#x=2123.5), stiffner-rh(x=2349), channel-bottom floor, channel-bottom floor, stiffener bottom floor (sta#17), channel-bottom floor, channel-bottom floor, lh crimped doubler(#9-#10), stiffner (sta #4-#5), lh floor sheet(sta #9-#10), channel bot.-lh (sta #1-#2), i/b channel bot.-lh (sta #1-#2), i/b channel bot.-rh (sta #1-#2), lateral channel (sta #1-#2), channel bot.-rh (sta #1-#2), cover plate (sta.#8 to #9), battery shield sheet(sta#2), channel top (sta#1a-#1), cover, top frame(sta#10,x=2226), bottom frame(sta#10,x=2226), top frame(sta#11), bottom frame (sta#11), top frame(sta#12,x=2735), bottom frame(sta#12,x=2735), frame-lh(sta#18), strip(sta#18), inner plate(stepway), plate-storage pouch rc, plate-storage pouch, top support, pouch plate rc - lh, pouch plate - lh, top supprt, bot. butt strap-fairing-lh, bot. butt strap-fairing-rh, butt strap(aft fairing)-lh, butt strap(aft fairing)-rh, doubler (fcs) -lh(#22-#23), doubler (fcs) -rh(#22-#23), skin-lh(sta#25-sta#26), skin-rh(sta#25-sta#26), channel-(iff ant.)(#19-#20), doubler-lh(longeron)(#19-#20), doubler-rh(longeron)(#19-#20), doubler-lh(longeron)(#19-#20), doubler-rh(longeron)(#19-#20), splice strip-bottom, (sta#22)(x=5515, rh-doubler (sta #1-#2), scoop-oil cooler, rear scoop(oil cooler), oil cooler duct-extension, hat stiffener-lh(sta#1b), hat stiffener-rh(sta#1b), stiffener(cover)-aft, stiffener(cover)-aft, doubler-lh, doubler-rh, stiffener(cover)-rh fwd, generator scoop-flange, generator scoop, rear scoop(generator cooling), duct-top, duct-bottom, lh cover(hyd. di)(#18-#19), stiffner-lh(#17-#18), lh-cover(dcdb)(#17-#18), vertical stifffener, stiffner(sta#18-sta#19), ecs cover-rh(sta#1-#1a)), lh-cover (sta#1a-#1), lh doubler (sta#1a-#1), side cover-rh, side doubler-rh, doubler(sta#14-sta#16), rh-cover(#25 - #26), lh-cover (gpu)(#19-#20), outer strip side -lh, outer strip side -rh, channel-center(lh side frame), channel-center(rh side frame), nose rib sta#3, nose rib sta#3, nose rib sta#4, nose rib sta#4, nose rib sta#5, nose rib sta#5, nose rib sta#6, nose rib sta#6, nose rib sta#9, nose rib sta#9, nose rib sta#10, nose rib sta#10, nose rib sta#11, nose rib sta#11, i/s rib #3 center, i/s rib #3 center, o/b stringer #7 (top), o/b stringer #7 (top), shroud skin#3, shroud skin#3, shroud skin #4, shroud skin #4, shroud riblet #2, shroud riblet #2, nose skin (top) (sta#1-sta#3a), nose skin (top) (sta#1-sta#3a), nose skin (bot) (sta#1-sta#3a), nose skin (bot) (sta#1-st

Central Government And Public Sector

CTN :39205542

14 May, 2025 NA

Jabalpur - Madhya Pradesh

Tender For corrigendum : supply of austenitic stainless steel 304l plates for cmpapp and mbrapp - mbrapp unit 2 , fueling machine side octagonal flange for mbrapp unit 3 , fueling machine side octagonal flange for mbrapp unit 4 , support rib for cmpapp unit 1 , support rib for cmpapp unit 2 , support rib for mbrapp unit 1 , support rib for mbrapp unit 2 , support rib for mbrapp unit 3 , support rib for mbrapp unit 4 , base plate for cmpapp unit 1 , base plate for cmpapp unit 2 , base plate for mbrapp unit 1 , base plate for mbrapp unit 2 , base plate for mbrapp unit 3 , base plate for mbrapp unit 4 , shell extension for cmpapp unit 1 , shell extension for cmpapp unit 2 , shell extension for mbrapp unit 1 , shell extension for mbrapp unit 2 , shell extension for mbrapp unit 3 , shell extension for mbrapp unit 4 , outer shell 55 deg sector for cmpapp unit 1 , outer shell 55 deg sector for cmpapp unit 2 , outer shell 55 deg sector for mbrapp unit 1 , outer shell 55 deg sector for mbrapp unit 2 , outer shell 55 deg sector for mbrapp unit 3 , outer shell 55 deg sector for mbrapp unit 4 , fm side support block for cmpapp unit 1 , fm side support block for cmpapp unit 2 , fm side support block for mbrapp unit 1 , fm side support block for mbrapp unit 2 , fm side support block for mbrapp unit 3 , fm side support block for mbrapp unit 4 , locking block of octagonal support structure for cmpapp unit 1 , locking block of octagonal support structure for cmpapp unit 2 , locking block of octagonal support structure for mbrapp unit 1 , locking block of octagonal support structure for mbrapp unit 2 , locking block of octagonal support structure for mbrapp unit 3 , locking block of octagonal support structure for mbrapp unit 4 , outer shell 305 deg sector for cmpapp unit 1 , outer shell 305 deg sector for cmpapp unit 2 , outer shell 305 deg sector for mbrapp unit 1 , outer shell 305 deg sector for mbrapp unit 2 , outer shell 305 deg sector for mbrapp unit 3 , outer shell 305 deg sector for mbrapp unit 4 , shell of main shell for cmpapp unit 1 , shell of main shell for cmpapp unit 2 , shell of main shell for mbrapp unit 1 , shell of main shell for mbrapp unit 2 , shell of main shell for mbrapp unit 3 , shell of main shell for mbrapp unit 4 , locking plate for cmpapp unit 1 , locking plate for cmpapp unit 2 , locking plate for mbrapp unit 1 , locking plate for mbrapp unit 2 , locking plate for mbrapp unit 3 , locking plate for mbrapp unit 4

Locking Plate Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government And Public Sector

Central Government / Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector