Latest lt pole Tenders | Government lt pole Tenders

State Government

CTN :45488694

18 Jun, 2026 9.88 Lacs

Panchkula - Haryana

Tender For shifting of ht/lt poles and lines exists in the alignment of plots in various sectors u/e karnal. (including one year free maintenance and defect liability period free of cost) (rates taken in dnit exclusive gst).

State Government

CTN :45427492

12 Jun, 2026 27.57 Lacs

Kinnaur - Himachal Pradesh

Tender For corrigendum : shifting/re-routing of existing 22kv old and new feeder by providing additional poles in es shong thong uesd, reckong peo. - tender for shifting/re-routing of existing 22kv old and new feeder by providing additional poles at ralli near power house in electrical section shong thong under electrical sub-division, hpsebl, reckong peo.

Central Government/Public Sector

CTN :45173476

17 Jun, 2026 NA

Dharwad - Karnataka

Tender For corrigendum : electrical work for general lighting power source arrangement at stp and erection of poles and luminaries on the pathway at iit dharwad

State Government

CTN :42950300

23 Jun, 2026 10.00 Lacs

Rajkot - Gujarat

Tender For corrigendum : new installation & replacement of 1ph & 3ph meter, service, mmb, and also new installed and replcement of 1ph & 3ph solar meter, new dropper on lt pole & 1 phase refitting work, distribution box on tc and dt meter work under shapar sdn under rrd

State Government

CTN :43615991

24 Jun, 2026 5.00 Lacs

Bhavnagar - Gujarat

Tender For corrigendum : tender for lt pole maintenance work in palitana town s/dn under palitana division.

Central Government/Public Sector

CTN :45382476

15 Jun, 2026 7.85 Lacs

Sidhi - Madhya Pradesh

Tender For corrigendum : providing support and muffing for rusted and damaged ms tubular electrical poles, including guarding of ht and lt overhead lines across selected spans at various locations within cws township.

corporations/Associations/Others

CTN :45491215

25 Jun, 2026 8.47 Lacs

Ghaziabad - Uttar Pradesh

Tender For works related to the repair, etc., of dilapidated or damaged lt poles installed on feeders emanating from various 33/11 kv substations within the operational area of the 11 kv technical and lt network (sahibabad, ghaziabad) under the urban electricity distribution division-ii, urban electricity distribution circle-ii (zone-iii), ghaziabad.

State Government

CTN :45484048

24 Jun, 2026 NA

Firozabad - Uttar Pradesh

Tender For providing of custom bid for services - for the work undergrounding of overhead/ht/lt lines and shifting of lt poles on turn key basis for sadar bazar under 11 kv ghantaghar feeder supplied from 33/11 kv substation gandhi park under the jurisdiction of eudc firoza..

CTN :45404122

19 Jun, 2026 NA

Palacode - Tamil Nadu

Tender For corrigendum : supply of equipment for mechanical engineering department - supply of equipment for mechanical engineering department, lathe machine :specification :bed: 2v & 2 flat, induction hardened and ground minimum bed length: 1375 mm bed width: 240 mm capacity: height of centre: 165 mm swing over bed: 320 mm swing over gap: 510 mm swing over cross slide: 180 mm distance between centres: 650 mm slides: cross slide travel: 200 mm compound slide travel: 115 mm spindle: spindle bore: 40 mm spindle nose: thread type, 62 mm spindle taper: mt-3 tail stock: quill diameter: 38.1 mm taper: mt-3 travel: 120 mm speed: no. of speeds: minimum 8 range: (40 800 )rpm threading: metric: (1 6 )mm (min 13 steps) english: (2 24 )tpi (min 19 steps) lead screw: (1 4) tpi electrical: motor: 1.5 hp, 230v/415v, 50 hz drive: v-belt structure: bed: close-grained cast iron (fg 260) gears: hardened steel base: rigid cast iron stand , open cup apparatus :specification :standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 6 c per minute (as per standard) temperature range: -6 to 400 c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valvebody: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hz safety: overheat protection heat insulation , closed cup apparatus :specification :standard compliance: astm d93 / is 1448 (part 21) test cup:brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustable ignition: pilot flame with automatic shutter mechanism temperature measurement: thermometer or digital sensor(ip-28c or astm) display: digital temperature display power supply: 230v ac, 50 hz safety:over-temperature cut-off flame safety control , tail stock assembly :specification :medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, slip gauge :specification :set size: m87 (87 pieces) or equivalent range: 1.001 mm to 100 mm step sizes: 0.001 mm 0.005 mm 0.01 mm material: high-grade alloy steel / tungsten carbide (preferred) hardness: hrc 63 65 accuracy: grade: grade 1 or grade 2 flatne flatness / parallelism: 0.5 m stored in protective wooden boxes to prevent wear; calibration grades include charts for exact sizes , dc motor:specification :type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steel calibration grades include charts for exact sizes supply: mounted on training base suitable for dismantling and inspection , hydraulic operated directional control valves (dcv):specification :type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study , bearing with shaft assembly :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply:mounted on training base suitable for dismantling and inspection , coupling unit using

CTN :45493201

16 Jun, 2026 20.15 Lacs

Kolkata - West Bengal

Tender For maintenance of electrical installation & fans including compound light, dg set, pump sets of general pool quarters at kb & kc block at salt lake, kolkata during the year 2026-27. (sh: replacement of old damaged worn-out street light poles by octagonal pole & i/c supplying laying al armoured cable, supply, installation, testing and commissioning of flood light, gate light, bollard in the park of kc block).subwork/packages:replacement of old damaged worn-out street lights etc.

Lt Pole Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors