Latest lube oil gauge Tenders | Government lube oil gauge Tenders

State Government

CTN :39373998

07 Mar, 2025 33.63 Lacs

Sangrur - Punjab

Tender For various works in sub tehsil longowal - patwari cabins:-scraping cement outer plaster, scraping cement inner plaster, cement rendering on plaster 1mm thick, 12.5 mm thick cement plaster 1:4, 20mm thick cement paster 1:4, first class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level., 115 mm thick brick wall with every fourth course reinforced with hoop iron laid in 1:4 cement mortar in superstructure, 12.5 mm thick cement plaster 1:5, 20mm thick cement paster 1:5, preparation of plastered or concrete surface or painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish, applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface, distempering with acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade, finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/10 sq, providing and laying vitrified floor tiles in different sizes in light colour shades made using full body technology (thickness to be specified by the manufacturer) with water absorption s less than 0.08% and conforming to is : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( full body vitrified tiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make na ideal choice for high traffic zones.) size 600x600 mm, providing and fixing mineral fibre false ceiling tiles at all heights of size 595x595mm of approved texture, design and pattern. the tiles should have humidity resistance (rh) of 99%, light reflection > 85%, thermal conductivity k = 0.052 - 0.057 w/m k, fire performance as per (bs 476 pt - 6 &7)in true horizontal level suspended on interlocking t-grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized@120 gsm) comprising of main t runners of 15x32 mm of length 3000 mm, cross t of size 15x32mm of length 1200 mm and secondary intermediate cross t of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter m-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and l-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main t . the system should rest on periphery walls /partitions with the help of gi perimeter wall angle of size24x24x3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall s.s. screws. the exposed bottom portion of all t-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. the work shall be carried out as per specifications, drawings and as per directions of theengineer-in-charge.with 16 mm thick beveled tegular mineral fibre false ceiling tile (nrc 0.55 to 0.6)size 595x595 mm, earth work in excavation in foundations trenches etc. in all kinds of soil where pick-jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres., cement concrete 1:8:16 with stone aggregates 40mm gauge mixing by mechanical means using concrete mixer volumetric type, first class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth, base course of floor consisting of 100mm thick cement concrete 1:8:16 and 100mm sand filling using mechanical mixer for mix

Central Government/Public Sector

CTN :39405345

01 Mar, 2025 NA

Bhopal - Madhya Pradesh

Tender For supply of stainless steel wire mesh of size gauge 24 x dia 225 mm for roof ventilator grills as per drawing no wlrrm8-1-6-817, alt-f, item no 2 only. as per drg.no. wlrrms-1-6-817, alt-f, item no 2 onl y. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :39417173

18 Mar, 2025 NA

Erode - Tamil Nadu

Tender For spares for slip gauges consisting of range 3.0mm, 3.1mm, 3.2mm, upto 5 mm (in incremental of 0.1 mm) total of 21 nos, thickness 10 to 20 mm, length 200 mm, material: en19, hardness 55-60 hrc, all gauge surfaces to be ground, sharp corner to be removed. note: 1. one no. sample to be got approved before effecting bulk supply. 2. item to be supplied along with calibrati on certificate. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :39418122

18 Mar, 2025 NA

Erode - Tamil Nadu

Tender For supply of ring gauge for pinion of wag9/wap7 locos as per rdso drg.no: skel-5043 alt.0 with, 1). pulling extractor for easy r emoval of ring gauge from shaft. 2). gauge (go & no), size 15.0mm (+/- 0.30mm) note: item to be supplied along with calibration certificate. [ warranty period: 30 months after the date of delivery ]

Central Government And Public Sector

CTN :39403367

06 Mar, 2025 12.27 Lacs

Chamba - Himachal Pradesh

Tender For supply of three phase electric motor as per atc doc , pump element for dual line grease pump dlgp 50 08 for miv assy item no 5 drg no dlgp 50 08 338 , reduction gear box,type-a237, ratio 70 by 1, ,item no-6, drg no- dlgp-50-08-338797 , direction control valve,model- 4we01 j 33 c w230 n9k4, item no-12,drg no-dlgp-50- 08-338797 , direct operated pressure relief valve,model-dprh06t315-11 11by09, item no-11,drg no-dlgp-50-08-338797 , coupling, item no-3,model-l 095,drg no-dlgp-50-08-338797 , dose feeder, model- dw-43, drg no-dlgp-50-08-338797 , straight connector 12 odx3by8 bsp ,item no-16,drg no-dlgp- 50-08-338797 , pressure gauge ,100mm dial,range- 400kg per cm2,for end pressure relay,drg no-dlgp- 50-08-338797 , dose feeder, model- dw-44, drg no- dlgp-100-08-338796 , ball valve 18 odx1by2 bsp, 500 bar,drg no-dlgp-100-08-338796 , straight union 10 od x1by4 bsp, item no-16,drg no-dlgp-100-08-338796 , ferrule 10 mm, item no.12, drg no. dlgp-100-08- 338409 , ferrule 18 mm, item no.12, drg no. dlgp-100- 08-338409 , ferrule 8 mm, item no. 12 , drg no-dlgp- 50-08-338410 , ferrule12 mm, item no. 12 , drg no- dlgp-50-08-338410 , control panel , grease gun pump

Central Government And Public Sector

CTN :39411798

06 Mar, 2025 NA

Raipur - Chhattisgarh

Tender For supply of item- tab clarithromycin 250 mg , tab amoxycillin 500 mg calvulanic acid 125 mg , tab doxycycline lb 100 mg , tab cifixime ofloxacin 200 mg , tab cefpodoxime cv 200 , tab ofloxacin and metronidazole , tab azithromycin 500 mg , tab lactic acid bacillus ds 120 m , tab intraconazole 200 mg , tab paracetamol 650 mg , tab paracetamol diclofenac and chlorzoxazone , tab aceclofenac paracetamol and serratiopeptidase , tab dicyclomine and paracetamol , tab drotaverin 80 mg , tab dicylomine hydrocloride and mefenamic acid , tab pracetamol ,propyphenazone and caffeine , tab bromelain trypsin rutoside diclofenac , tab paracetamol i.p. 500 mg, phenylephrine hydrochloride i.p. 5 mg, caffeine i.p. 30 mg, diphenhydramine hydrochloride i.p. 25 mg , tab montelukast and levocetrizine , tab paracetamol cetrizine and phenylephrine , tab levocetrizine 5 mg , tab dextromethorphan hbr 10 mg, phenylephrine 5 mg & chlorpheniramine maleate 2 mg , tab paracetamol 450 + guaiphenesin 50 + chlorpheniramine maleate 4 + bromhexine hcl 5 mg , tab pantoprazole dsr 40 mg , tab ondensteron 4mg , cap rabeprazole dsr 20 mg , cap racecadotril , tab finoxadine m 10mg , tab multivitamin & amino acid minerals , tab b-complex , tab calcium + d3 , tab vitamin c with zink , tab folic acid 5mg , ors ( cipla ) , syp levosalbutamol, ambroxol, and guaifenesin , syp phenylephrine, chlorpheniramine maleate, and dextromethorphan hydrobromide. , syp disodium hydrogen citrate , syp magnesium hydroxide i.p. (added as paste) - 185 mg. simethicone i.p. - 50 mg. sodium carboxymethylcellulose i.p.- 100 mg. dried aluminum hydroxide gel i.p. (added as paste) - 830 mg. , syp lactulose 50 ml , silver nitrate and chlorhexadine gluconate cream 15 gm , lulicanazole 1% cream 20 gm , desonide cream 0.05% , mometasone furoate cream 0.1% , gel diclofenac 1mg, linseed oil 3mg, menthol 5mg, and methyl salicylate 10mg. , volini spray , mouth gel choline salicylate and lidocaine. , n/b ipratropium and levosalbutamol 1.25mg , povidone lodine ointment 15 gm , mupirocin 2% ointment 5 gm , povidone lodine solution 100 ml , sodium carboxymethylcellulose eye drops , ofloxacin eye drops , oximetazoline nasal spry , hand sanitizer , hydrogen paraoxide 100 ml , inj. pantoprazole 40 mg , inj.ondansteron 4 mg , inj.diclofenac 75 mg , inj .tetanus toxoid 0.5 ml , inj.avil , inj h cort 1oo mg , inj dexamethasone sodium phosphate 4 mg , inj ceftrixone + sulbactum , inj amikacin 500 mg , inj paracetamol 450 mg , inj methylcobalamin (a.k.a. mecobalamin) 1500mcg, niacinamide 100mg, pyridoxine or vitamin b6100mg/ml. , inj lidocaine hydr0chloride2 % , ns 500 ml 0.9% , dns 5% 500 ml , rl ringer's lactate 500 ml , normal seline 100 ml 0.9% , distal water 5 ml , crepe bandage 4 inch , crepe bandage 6 inch , roller bandage 6inch , roller bandage 4 inch , sterile gauge piece , sterile gauge pad , absorbent cotton roll 200 gm , dynaplast bandage , paper tap 4.5 inch , blood glucose test strip (bg-03) dr. morpanam (50) strip , dispo 2ml , dispo 5 ml , dispo 10 ml , needle 24 no. , iv set adult , cannula 22 no. , cannula 20 no. , nebulizer mask adult set , loose gloves powder free (m) , surgical gloves 7 .5no , room freshners

CTN :39392771

28 Feb, 2025 2.60 Lacs

Karauli - Rajasthan

Tender For purchase of various item use for library in collage yatha with iron alamira and iron alamira rack according to nit-, chair - 400 length 15x width 15x height 32 inch table - 400 length 24x width 18x height 32 inch (with set 18 k.g. weight and pipe gauge 16 mm sheet 20 gauge, , 78 inch height & 36 inch width & 19 inch depth (60 k.g. weight per piece), , 78 inch height & 36 inch width & 19 inch depth (30 k.g. weight per piece), , 78 inch height and 36 inch width and 19 inch depth, 01 locker and 05 compartments in the middle, outside pan 20 gauge, other pans 22 gauge (69 k.g. weight per piece), , 2.00 ton inverter three star (02 nos.), , ,

Central Government And Public Sector

CTN :39385416

10 Mar, 2025 NA

Lumding - Assam

Tender For supply of glycel herbicide gilphosate 41 percentage si , light weight alloy spanner double end size 36mm x 41mm , mechanical track jack 15 ton capacity non infringing type , weld trimmer machine , rake ballast , rail profile gauge cum recorder detailed description as per item 6 of the attached specification document , rail profile gauge cum recorder detailed description as per item 7 of the attached specification document , rail profile gauge cum recorder detailed description as per item 8 of the attached specification document , digital gauge cum level as per rdso specification no tm-58 third revision of 2023 for pwi hill lmg , digital gauge cum level as per rdso specification no tm-58 third revision of 2023 for pwi hill nhgj , digital gauge cum level as per rdso specification no tm-58 third revision of 2023 for pwi hill nhlg

Central Government / Public Sector

CTN :39195131

22 Feb, 2025 NA

Panipat - Haryana

Tender For corrigendum : tender for supply of hydraulic fl spreader,5 mt ; spreader, flange size mm ; hydraulic flange spreader capacity: 5mt ;hydraulic flange spreader kit (kit includes spreading tools, hand pump, hydraulic hose, pressure gauge, gauge adaptor,couplers and accessories) capacity 5 ton wedge : 3-28 mm (aprox) bolt size: 19-28 mm (approx) pressure rating700(+/-20) bars cylinder type : single-acting, spring-return type. ss quick coupler with ss nipple and dust cap. includes incarry case: 1 x spreading tool with threaded coupler 1 x 2m hydraulic hose with threaded couplers on both ends with end guards anddust caps 1 x 700(+/-20) bars hand pump, gauge, gauge adaptor <(>&<)> coupler 1 x instruction manual 1 x carry case supply ofspares : one set of pump <(>&<)> spreader repair kit along with seal, o-ring <(>&<)> gasket. make: power team/ hi-force/gemini/ torqup/ enerpack/ griphold/ holmetro/ gedore/ hydropac/ powerpac/ hydratight, hydraulic fl spreader,10mt ; spreader, flange size mm ; hydraulic flange spreader capacity: 10mt ;hydraulic flange spreader kit (kit includes spreading tool, hand pump, hydraulic hose, pressure gauge, gauge adaptor,couplers and accessories) capacity 10 ton wedge : 3-28 mm (aprox) bolt size: 31-41 mm (aprox) pressure rating700(+/-20) bars cylinder type : single-acting, spring-return type. ss quick coupler with ss nipple and dust cap. kitcomponents: 1 x spreading tool with threaded coupler 1 x 2m hydraulic hose with threaded couplers on both ends with end guards anddust caps 1 x 700(+/-20) bars hand pump, gauge, gauge adaptor <(>&<)> coupler 1 x instruction manual 1 x carry case supply ofspares : one set of pump <(>&<)> spreader repair kit along with seal, o-ring <(>&<)> gasket. make: power team/ hi-force/gemini/ torqup/ enerpack/ griphold/ holmetro/ gedore/ hydropac/ powerpac/ hydratight , puller,brg,40-250mm ; puller type: bearing size capacity mm/inch tonnes ; 40 - 250mm ; mechanical bearing puller as per following specification: 1. heavy duty sliding design 2. puller tobe equipped to protect spindle and tommy. 3. puller should be self-locking and self-centring. 4.minimum jaw dia: 40-45 mm maximum jaw dia: 250-270 mm maximum reach: 300-340 mm number of jaws: 3 5.vendor must submit the technical specification and catalogue of the offered product for technicalacceptance. all the necessary accessories and warranty certificate for 12 months from date ofreceipt material.vendor should give complete specification and operating manual along with theoffer. 6. the item should be supplied with test certificate as per the standard.

Central Government/Public Sector

CTN :39408168

17 Mar, 2025 NA

Ahmedabad - Gujarat

Tender For supply of set of digital dial snap gauge consisting of three items as follows. 1)digital dial snap gauge to range 125-150mm, least count: 0.001mm. 2) digital dial snap gauge to range 150-175mm, least count: 0.001mm. 3)digital dial snap gauge to range 175-200mm, least count: 0.001mm along with digi tal dial gauge range of dial :0-12.7mm in each type. make:- mitutoyo/precision/mehr/starret/igauging/vogel germany/spi. necessary calibration certifi cate to the validity of 12 months for each item separately to be submitted. [ warranty period: 30 months after the date of delivery ]

Lube Oil Gauge Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors