Latest lv bushing clamp Tenders | Government lv bushing clamp Tenders

State Government

CTN :39970364

13 May, 2025 NA

Multi City - Maharashtra

Tender For corrigendum : supply of t & p material for line staff under kavathemahankal division taparia make plier (product no-1621-8), lt line tester with neon bulb (green handle, supply of lineman safety zoola, with garware make 12mm dia. pp rope, with m.s. hook made out from 12 mm diameter m.s. round bar, teak wood plank 475x100 x25 mm & gi thimble, seam less 11kv rubber hand gloves, as per current is specification for electrical work, 355 mm long good quality, crystal make, seam less 33 kv rubber hand gloves, as per current is specification for electrical work, 380 mm long good quality, crystal make, pvc insulated screw drivers

CTN :40208129

12 May, 2025 7.50 Lacs

Ajmer - Rajasthan

Tender For madpump spares parts and accessories supply work - p.v.c. pipe 150mm, p.v.c. pipe 100mm, p.v.c. pipe 75mm, sappata pipe 150 mm, sappata pipe 100 mm, sappata pipe 75 mm, football 150mm, football 100mm, football 75mm, hose nipple 150mm, hose nipple 100mm, hose nipple 75mm, hose socket 5 x 6 , joint nipple 100mm, joint nipple 75mm, clip 150mm, clip 100mm, clip 75mm, handle for starting, elbow 40mm, socket 40mm, rubber coupling, valve set, guide set, valve lock, valve spring, air cleaner, diesel filter, piston 102mm, nut bolt 21no.tvs, diesel pipe, piston ring set, packing kit, head block, diesel filter body, bearing, glen dori, grease nipple, bush, check nut, pump nozzel service, nozzel pipe, diesel tank, silencer mani fold body, silencer, wheel rim (size as per 6.00-16 tyre), hub and bearing set for wheel, trolley hook, trolley stand ms channel 4 x2

corporations/Associations/Others

CTN :40220657

06 May, 2025 3.26 Lacs

Hyderabad - Telangana

Tender For annual maintenance for supply of sanitary and hardware item in abids parking complex ghmc under ee division- 14, ghmc (rs.4.00lakhs) - 1000 ml - solvent cement, 12mm 100 nos, 25mm 100 nos, 30mm 100 nos, 35/38 mm 100 nos, 50 mm 100 n0s, 63/75 mm 100 nos, aluminium aldrops (is:2681) 250 mm long, aluminium aldrops (is:2681) 300 mm long, aluminium butt hinges (is:205)- 100 mm long, aluminium butt hinges (is:205)- 125 mm long, aluminium butt hinges (is:205)- 150 mm long, aluminium door handles (1s:208) 100 mm long, aluminium door handles (is:208) 150 mm long, aluminium tower bolt-10 mm bolt (1s:204) 150 mm long, aluminium tower bolt-10 mm bolt (1s:204) 200 mm long, box hinges for cup boards, brass butt hinges (is:205)- 100 mm long, brass butt hinges (is:205)- 125 mm long, brass butt hinges (is:205)- 150 mm long, brass door stoppers, brass fancy door handles 150 mm, brass fancy handles 200 mm, keyless iockset for toilet doors with brass knob handles, ms-powder coated - door stoppers, ms-powder coated aldrops (is:2681) 250 mm long, ms-powder coated aldrops (is:2681) 300 mm long, ms-powder coated butt hinges (1s:205)- 100 mm long, ms-powder coated butt hinges (is:205)- 125 mm long, ms-powder coated butt hinges (is:205)- 150 mm long, ms-powder coated door handles (1s:208) 125 mm long, ms-powder coated door handles (1s:208) 150 mm long, ms-powder coated tower bolt-10 mm bolt (is: 204) 150 mm long, ms-powder coated tower bolt-10 mm bolt (is: 204) 200 mm long, providing and fixing aluminium extruded section body tubular type hydraulic door closer (is: 3564) with double speed adjustment with necessary accessories and screws etc. complete (type-3: for width of doors 851 to 1000 mm), s&f bronze gate/ globe valve as per is - 778 class - i, indian make heavy type - 50 mmn nb size, s&f cp finish brass body 32 mm dia nominal size waste coupling with half/full thread & brass check nut conforming to is 2963: 1979, s&f of 15 mm brass angle stop valve of quarter turn spindle type of not less than 400 grams weight with internal threaded conforming to is 8931, s&f of 15 mm brass body cp finish long body bib tap of not less than 500 grams weight with quarter turn spindle internal / external threaded connection conforming to is 8931 and with a warranty of 10 years, s&f of 15 mm brass body premium variety chromium plated finish long neck pillar cock with aerator of not less than 500 grams weight quarter turn spindle conforming to is 8931 and with a warranty of 10 years, s&f of 15 mm brass body premium variety chromium plated finish pillar cock with aerator of not less than 500 grams weight quarter turn spindle conforming to is 8931 and with a warranty of 10 years, s&f of 15 mm cp finish brass body health faucet qun, s&f of 15 mmn stainless steel flexible hose 1.0 m long for hand shower / health faucet with brass nuts, s&f of chromium plated finish brass body quarter turn bibcock cum health faucet with 1m long tube and wall hook with 10 years warranty, s&f of gi pipe plug of size 15mm nominal size dia, s&f premium make cpvc pipes of 22.20mm od pipe sdr 11, s&f premium mnake cpvc pipes of 28.60mm od pipe sdr 11, square tile & jali - upvc/swr pipe fittings, stainless steel aldrops (is:15834) 250 mm long, stainless steel aldrops (is:15834) 300 mm long, stainless steel butt hinges (is:12817)- 100 mm long, stainless steel butt hinges (is:12817)- 125 mm, stainless steel butt hinges (is:12817)- 150 mm long, stainless steel door handles 150 mm long, stainless steel door handles 200 mm long, supply & fixing 40 mm nominal size dia pvc solid waste pipe outlet, supply and delivery of 15 mm nominal size pvc connection with brass union nut c.p coated, supply and delivery of bombay dyeing single bed sheet with 2 sheet & 2 pillow covers etc., supply and delivery of bombay dyeing towels for officers chamber of different size etc complete quoted rate, supply and delivery of low down porcelain flushing tank wit

CTN :40222090

19 May, 2025 NA

Satna - Madhya Pradesh

Tender For invitation of rates equipment/tools - invitation of rates equipment/tools, abc fire extinguisher 12 kg (map 50), abc fire extinguisher 1kg (map 50), abc fire extinguisher refilling (map 50) refilling, abc fire extinguisher 2kg (map 50), abc fire extinguisher 4kg (map 50), abc fire extinguisher 6kg (map 50), abc fire extinguisher 9kg (map 50), adjustable wrenches 27no., adjustable wrenches all type (upto 27 no.), air blower (620w, 16000 rpm, air flow 3.5 cum/min, anti vibration) (heavy duty), allen key set, angle cutter (heavy duty) (11000 rpm), axe large (heavy duty), b.a. set refilling, battery charger machine (12/24v, upto 10 amp, 70 ah to 220 ah) portable (heavy duty), multi bank charger, battery operated grease gun 480w 10,000 psi, bolt cutter 350 mm, bolt cutter 600 mm long(heavy duty), bolt cutter 900 mm long(heavy duty), breaker (1000 blow/minute, 2000w.), canvas gloves with anti skid palm (heavy duty), cap hydrant spindle (heavy duty), car stopper/speed breaker, chheni 1 kg steel (heavy duty), chheni 1.5 kg steel (heavy duty), clamp (0.5 ,0.75,1,1.25, 1.5,1.75, 2,2.25, 2.5, 2.75, 3,3.25, 3.5, 3.75 , 4 inch) complete set, claw hammer 1.5 lb (ss), co2 fire extinguisher refilling, co2 fire extinguisher 1kg, co2 fire extinguisher 2kg, co2 fire extinguisher 4kg, co2 fire extinguisher 6kg, co2 fire extinguisher 9kg, combi tools hydraulic (spreading force 23 ton, cutting force 43 ton), combined key for hydrant cover and lower valve, crow bar 6 ft. (heavy duty), crow bar of 6 ft long 25mm dia, cutter stone (heavy duty), delivery hose 63mm dia confirming to (type a 15 mtr length) with ss metal and female coupling, delivery hose 63mm dia confirming to (type a 30 mtr length) with ss metal and female coupling, delivery hose 63mm dia confirming to (type b 15mtr length) with ss metal and female coupling, delivery hose 63mm dia confirming to (type b 30mtr length) with ss metal and female coupling, digging bar(heavy duty) 5kg, double side box end wrench ss (12-13, 14-15, 16-17, 23-26, 24-27) complete set, drill machine electric 500watt 2600rpm with all type of drill bits set, electric chain saw machine (heavy duty) 16 inch bar,800w, electric circular saw 1400 watt, electric tool kit (megnetic bit holder, long nose plier, vu inch adapter pller 1x4, socket wrench, cutter hammer, wood drill bits x5, masonry drills bitsx5, wrenchsx7, allen keysx8, hix bitsx10 ), fire beater ms 5kg, fire blanket 5mtrx5mtx4mm (heavy duty) asbestos, 900 degree c, fire cylinder painting work, fire fighter cap (heavy duty), fire fighter winter jacket (heavy duty), fire fighter uniform (suit), fire fighting safety shose/boots (heavy duty), fire net (3m x 10m) (heavy duty), fire safety helmet with tourch facility(heavy duty), fire vehicle ladder 24 feet (aluminium), fire vehicle ladder 30 feet (aluminium), fireman axe (heavy duty), first aid box, floodlight led work light 18 v, foam branch-fb5x type with pick up tube, gm, foam tubes (length 14 inch), foam tubes (length 16 inch), fog nozzle 63 mm, gunmetal, folding ladder aluminium 15 feet (heavy duty), full face mask, g clamp 100mm, goggle- (heavy duty), grinding stone 4 inch,metal (heavy duty), hacksaw 390mm x 23mm x 150mm (heavy duty), hammer - 10 kg, hammer 1 kg (ss), hammer 2 kg (ss), hammer 3 kg (ss), hammer- 5kg, hand controlled branchpipe gm 63mm, hand cross saw 18 inch steel (heavy duty), high expansion foam branch pipe 63mm gm, high expansion foam compound, high velocity nozzle 63 mm gunmetal, hook ceiling (preventor) with 3 mtr long wooden handle(heavy duty), hose bandages, hose box (for storing two nos 7.5m or 15m hoses and one nozzle), hose rack asssembly, hose reel 19mm heavy duty (30 m), hose reel drum ms, hose reel nozzles bronze inch, hydraulic bolt cutter electric 950 w cutting diameter 20mm, hydraulic grease gun with all nozzle set 9gm/stroke, 10 kg, heavy duty,4000 psi, hydraulic rebar cutter (14 ton)(manual), impact wrench tyre nut opener,4200 rpm(with nozzle of 27no.30no.32no.), jack hydraul

CTN :40225687

17 May, 2025 NA

Bazpur - Uttarakhand

Tender For stiching machine spares in sugar mill - throat plate 80624 c., feed dog g 80605 e., pressure foot 80627 e., needle bar with nut., pressure bar left & right 80661 b., looper as 26 x a., thread tension assembly. ( 80664 ), pressure bar spring., looper carrier rod head., looper shaft., feed shaft., feed shaft connection., feed regulating stud assembly., pressure bar holder., looper carrier., arm shaft., arm shaft crank (rear)., crank connecting rod., main crank shaft., needle s.d.t./no.27/28., square bush with can., looper thread guide., needle thread guide., looper eccentric assembly., bush set., screw set., looper thread take-up rew01., looper bell crank rod., looper bell crank., bearing housing., crank shaft bearing housing 80685., pressure foot lifting lever., lifting lever hanger., lifting lever stud., lifting lever spring., feed shaft connecting pin., feed shaft crank (for 80000 dx model)., ball joint assembly. ( 80657a ), looper rocker assembly. ( 29497 ), feed lift cam., feed lift escentic., feed rocker assembly., feed bar assembly., feed rocker pin., looper avoid eccentric fork assembly., needle bar connection 80659a., needle lever assembly 80615., needle lever shaft., guide fork., shell assembly., looper drive lever. ( 80637 ), feed lift eccentric fork., needle g.b. 250 no., cast off hook assembly., crank shaft 80822., union elbow., foot switch., tension assembly complete. ( rew84 ), pressure bar regulator. ( 204rew ), feed drive ecc assembly. ( 29099s ), looper thread cost off assembly. ( cebt-80653 ), nut r.h. thread no. 18., nut l.h. thread 269., pressure bar link., niddle gb- 25069, connecting link ha54a., rocker for looper drive lever shaft 80638a., needle lever ball link 29066, needle lever rod 80630, connecting assembly for chain cutter 29132r, frame thread eyelet assembly 21256r., oil distributer 80293r, driving chain (l&h) rew011, looper drive connecting assembly 29442n., nut l.h. thread 80630c, nut r.h. thread 80630d, shell 80652., feed bar 80634r, collar (p.no. 482 c),, collar (p.no. 482 c),, looper drive lever to gabes shaft, 80640., needle bar guard, 80673 c., needle bar bushing (upper) (80673 da), needle bar bushing (lower) 80673 da., needle clamp nut ha 56., pressure bar bushing 80862., spring for lifting lever(80649)., stud for lifting lever, 420 rew., sprocket for conveyor chain 7 teeth (rew 10)., sprocket for driving chain (rew 013), dye-pressed sheet slate for sugar bag tacker,(rewhg 600)., collar 80681., looper avoid ecc as 38 b., wooden slate for stacker, 2 x 2 x 26 ., m.s. roller for stacker slate., chain sproket for sugar stacker . (i) size: teeth=19, pitch-1 , (ii) teeth= 38, pitch-1 , driving cahin for above., ball joint assembly, 80658 a., ball joint assembly, 80657 a., connecting rod 80641., wooden slate for stacker, 1 1/2 x 2 , ball joint assembly with rod complete 80658a., looper lever 80637., looper as26 x a., needle bar (80617)., connection assembly for chain cute drive 29132r., middle bush 80694., lower bush 80694., screw set., dye- pressed sheet for sewing machine (complete) rew020, dye- pressed sheet slate for sewing machine (complete) with febricator chain for conveyor rew020 length 62sheet slate.

Central Government/Public Sector

CTN :40195353

16 May, 2025 NA

Bhagalpur - Bihar

Tender For supply of 00010 m4648126006 retaining plate, ms, 70x70mm,00010 m4648126006 retaining plate, ms, 70x70mm,00010 m4648126006 retaining plate, ms, 70x70mm,00010 m4648126006 retaining plate, ms, 70x70mm,00030 m4648126009 rod, for hook of insulation, ms, 200x6,00030 m4648126009 rod, for hook of insulation, ms, 200x6,00030 m4648126009 rod, for hook of insulation, ms, 200x6,00030 m4648126009 rod, for hook of insulation, ms, 200x6,00040 m4648126004 mild steel hook, 300 x 6 mm,00040 m4648126004 mild steel hook, 300 x 6 mm,00040 m4648126004 mild steel hook, 300 x 6 mm,00040 m4648126004 mild steel hook, 300 x 6 mm,00050 m4648126008 insulation stiffener, as per is 2676,00050 m4648126008 insulation stiffener, as per is 2676,00050 m4648126008 insulation stiffener, as per is 2676,00050 m4648126008 insulation stiffener, as per is 2676

Central Government/Public Sector

CTN :40181461

22 May, 2025 NA

Bikaner - Rajasthan

Tender For supply of highly insulated frp telescopic hot line stick with ms hook for removal of bird nest from str ucture insulation level 105kv rms in one minute for 25kv conventional type ohe( 08 meter long). [ warr anty period: 30 months after the date of delivery ]

CTN :40158725

19 May, 2025 NA

Budgam - Jammu And Kashmir

Tender For supply of mta br miscellaneous items - tiles ceramic 300x300mm , natural m sand find sand free from moisture organic , hollow blocks of size 400mm x 200 mm x 200 mm casted in design mix 1 x3x6 to have a strength of m10 to m15 , agg 20 mm the size and grading of aggregate , pbs roll self finished tarfelt grade i conforming to relevant is of size 1 mtr width and 20 mtr long wt not less than 42 point 50 2 point 50 kgs , glass putty , synthetic enamel paint colour black , synthetic enamel paint colour white , synthetic enamel paint colour og , synthetic enamel paint colour red , synthetic enamel paint colour blue , synthetic enamel paint colour yellow , synthetic enamel paint colour green , synthetic enamel paint red oxide , paint brush 2 inch , paint brush 3 inch , paint brush 4 inch , thinner , white cement , wood varnish , karandi mason , shovel with wooden handle , gurmala with rubber base , axe picks with wooden handle , portable drill machine , combination cutting pliers insulated with thick c a sleeve length 210 mm , measuring tape 30 mtr , measuring tape 15 mtr , hack saw frame , hack saw blade , hacksaw blade double end , fawda with wooden handle , iron cutting machine blades , tiles cutter blade , hand cutter machine make bosch , 12 mm thick plywood bwr of size 8 feet x 4 feet , looking mirror 600mm x 450mm , looking mirror 480x510mm , fire extinguisher 2 kg , wire mess for door and window , tower bolt 150mm , self taping screw 2 point 5 inch , self taping screw 25mm 1 inch , self taping screw 35mm 1 point 5 inch , self taping screw 50mm 2 inch , self tapping screw 75mm 3 inch , self tapping screw 100mm 4 inch , ply wood 8 feet x 4 feet x 6mm thick , ply wood 8 feet x 4 feet x 12mm thick , ply wood 6 feet x 3 feet x 6mm thick , ply wood 6 feet x 3 feet x 12mm thick , nails half inch , nails 1 inch , nails 1 point 5 inch , nails 2 point 5 inch , nails 2 inch , nails 3 inch , nails 4 inch , ms screw 15mm 100 per pkt , ms screw 20mm 100 per pkt , ms screw 25mm 100 per pkt , ms binding wire not less than 0 piont 9 mm dia , j hook 8 mm dia and 150 mm long , hydraulic door closure , hdpe sheet 400 micron , hdpe laminated sand bag of size 75 x 40 cm , door stopper , door locking arrangement , hinges 2 inch 50 mm , door handle steel 8 inch , ppgi sheet 12 feet x 3 feet x 0 point 50mm , cgi sheet 810 x 2410 mm long 0 point 63mm thick 8 inch , cgi sheet 810 x 3050 mm long 0 piont 63mm thick 10 feet , cgi sheet 810 x 3657 mm long, 0 point 63mm thick 12 feet , silicone gel sealant of 01 pack of 400 gms including applicator gun , fevicol , western toilet seat

State Government

CTN :40144082

15 May, 2025 NA

Almora - Uttarakhand

Tender For supply of decentralized items under edsd molekhal under head o&m 2024-25 - ms nut & bolt off size, dead end clamp with i hook ab cable sp-21, stay clamp for sp-23 single end, stay clamp for sp-23 double end, lt clamp with n&b st pole sp-21, stay clamp for sp-21 with nut & bolt, earth wire clamp for sp-23 with n/b, suspension clamp with eye hook, pp & clamp with n & b st pole sp -23, dead end clamp for ab cable, stay insulator 75x90 mm, shackle insulator 100x115 mm with n & b, stay insulator 65x90 mm, bracing clamp top for sp-23 with n/b, bracing clamp bottom for sp-23 with n/b

State Government

CTN :40154816

09 May, 2025 NA

Chhindwara - Madhya Pradesh

Tender For supply of fencing material for plantation sites - fencing material -, galvanized steel barbed wire- mesh wire - galvanised steel wire of 2.5 mm diameterpoint wire - galvanised steel wire of 2.5mm diameterbarbs - sistance between two boards 75mmm, the barbs shall have four points and shall be formed by twisting two point wires each two turns. tightly around both the line wires making altogether four complete turns.standard - conforming to is-278-2009, galvanised steel chain link fence- mesh wire - galvanised steel wire of 3.15 mm diameterfabric size - 100x100 mm height - 150 cm, line wire - 2 numbers of line wires of 4.00 mm diameterstandard - conforming to is-2721-2003, with up to date amendments, rcc fencing poles height 2.0 mtype - straight, length - 2.00 m, dimensions - bottom 10x10 cm square, top 8x8 cm squarecement concrete mix - cement, sand and metal ration 1:2:4, with 12.5 nominal size coarse aggregate, sand used should be free from clay and salt. concrete mix shall be conforming to grade m-15 of is:456:2000reinforcement - 4 round vertical bars of 6 mm diameter, 11 no of stirrups of 6 mm diameter round ms bars 20 cm centre to centre. hooks - 5 no. bottom hook should be provided 60 cm above the bottom of the pole, second at 82.5 cm, third hook at 112.5 cm, fourth hook at 150 cm, top and fifth hook at 195 cm from bottom.manufacturing - in order to ensure desired compressive strength, rcc fencing poles should be compacted with the help of platform vibrators. surface should be uniform and free from voids. the concrete cover over the reinforcement should not be less than 1.5 cm.

Lv Bushing Clamp Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

State Government

State Government