Latest mag welding machine Tenders | Government mag welding machine Tenders

CTN :41272076

08 Aug, 2025 6.69 Lacs

Kavaratti - Lakshadweep

Tender For construction of segregation shed with material recovery facility centre for plastic waste management at agatti (re tender-i) - surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m., earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by engineer-in- charge:, providing and laying cement concrete 1:4:8 ( 1 cement: 4 river sand: 8 granite chips ) foundation and plinth., providing and laying cement concrete block (machine moulded) masonry in in foundation and plinth in cm 1:6 with blocks of size 40cmx20cmx15cm, providing and laying half block masonry in super structure above plinth level upto floor five level cement mortar 1:4 ( 1 cement 4 metal sand ) cement concrete block of size 40cmx10cmx15cm, 12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand), providing and fixing hand rail of approved size by welding etc. to steel ladder rail-ing, balcony railing and staircase railing including applying a priming coat of approved steel primer g.i.pipe, steel work in built up tubular trusses including cutting, hoisting fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shaped washers etc. complete. hot finished welded type tubes, providing aluminium sheet roofing fixed with galvnized iron jor l hooks and 8mm dia c.i plain bitumen washers complete excluding the cost of purlins, rafters and trusses corrugated sheet 0.56mm thick., cement concrete flooring 1:2:4 ( 1 cement, 2 metal sand,4 granite chips ) finished with floating coat of neat cement ,including cement slurry ,but excluding the cost of noising of steps etc.complete a) 40mm thick with 20 mm nominal size stone aggregate, providing ridges or hips in aluminium sheet roofing with g.i /j or l hooks bolts and nuts 8 mm dia g.i plain bitumen washers complete. 0.56mm thick., providing and fixing m.s welded mesh 50mmx50mm in position and applying a priming coat of approved steel primer with all necessary nails

State Government

CTN :41249594

07 Aug, 2025 NA

Multi City - Telangana

Tender For tggenco-ytps (5x800mw)-supply of certain materials for the maintenance of railway siding track of yadadri thermal power station.-, rail cutting machine having petrol engine, 6.5 hp, 3800 rpm, 50 hz with cutting wheel of dia 350 mm, , rail hole drilling machine having petrol engine, automatic, 5 hp, 3800 rpm, 440 v, 50 hz, 2 shaft, , angle grinding machine having 230 v, 50 hz, 1200 rpm, 600 w, 2 way, gws 600 bosch with grinding wheels, , brush cutter machine having petrol engine, 4 stroke neptune, 1 hp, bc-99, gx-35 of honda or equivalent, , welding machine having 3 phase, 400 amp, 415 v, 50-60 hz with copper lug connector, 16 sqmm copper & 25 sqmm earthing cable, 1 holder, 1 leather hand gloves, 1 auto darkening welding helmet, , mild steel mechanical track lifting jack of 15 ton capacity having base area 155 mm x 300 mm, lifting stroke @ 280 mm, 25 kg weight, , spiking hammer of 4.50 kg capacity with long handle suitable for fixing rail clips, , mild steel sleeper tangs for shifting concrete sleeper one place to other place, , mild steel rail tangs for shifting rails one place to other place, , mild steel crow bars of dia 32 mm & 1680 mm long for packing ballast around the sleeper, , mild steel ballast fork with handle for digging ballast, , carbon steel pickaxe of 20 inch long, , iron shovel/spades with long handle, , motor pans of 18 inch dia & made with plastic, , mild steel jim crow for straightening rail, , aluminum level cum gauge with glass level, spirit level, , 100 cm long straight edge, , canne-a-boule, , rail thermometer, , mild steel panja (railway track ballast spreading), , ruler, scale, steel, 30 cm, , chain pulley, spur gear, monorail, 3t, 6 m, , double ended spanners (ribbed) 36 x 41, , nylon rope, diameter: 1/2 inch of 100 m length

CTN :41266674

20 Aug, 2025 NA

Kupwara - Jammu And Kashmir

Tender For supply of hdpe laminated sand bag of size 75x40 cm sand colour and each bag having weight not less than 60 gms , shs 6 mm thick size 120x120mm x 2.1m long for column with holes as per tech spec and make of tata sail jindal or as per make att , ismb 150 rsj 150 x 75 mm g1 3050mm long for beam conforming to relevant is and make of tata sail jindal or as per make att , ismb 150 rsj 150 x 75 mm g2 2.2m long for beam 2 conforming to relevant is and make of tata sail jindal or as per make att , ismb 125 rsj 150 x 75mm g3 0.40m long for beam conforming to relevant is as per tech spec and make of tata sail jindal or as per make att , 6mm thick ms plate 150x150mm for shs column incl welding knoching cutting and nuts and bolts washer etc , 12mm dia nut bolt 75mm long inserted in 12mm dia eight nos hole in each column , steel roofing trough of size 1630 mm x 613 mm x 180 mm made out of 2 mm thick as per tech spec att , ms hexagonal nuts bolts and washers 12 mm dia 40 mm long. , ldpe sheet 3 m wide weighing 1.00 kg per rm black in colour and shall contain as per tech spec att , red oxide primer conforming to relevant is , synthetic enamel paint colour green ist quality conforming to relevant is as per tech spec att , thinner as per as per tech spec att . sample to be approved before supply. , dry distemper as per tech spec att. sample to be approved before supply , chalk whiting as per tech spec attsample to be approved before supply , paint brush 4 inch make amar or lucky sample to be approved before supply , pre fabricated double shutter steel door of size 1100mm x1900mm made out of 2mm thick ms black carbon sheet as per tech spec att , supply of swivel bullet proof glass glass 610mm x300mm size 72 mm thick as per tech spec att , silicone gel sealent of 01 pack of 400 gms including aplicator gun , ply wood 10 mm thick as per requirement for flat surface , foundation bolts of 16 mm dia and 250 m long with nut bolts washer etc. , stone aggregate to be crushed rock or gravel 20mm graded confirming to relevant is , manufacturing sand confirming to relevant is as per tech spec att , stone aggregate to be crushed rock or gravel 40mm graded confirming to relevant is as per tech spec att , rapidite quick setting liquid confirming to is 1344-2018 of make acclerec cico fosroc , integrated water proofing compound. , aluminimum straight edge 50mm squre 2mm thick 1800mm long , wooden flat gurmala , water leveling pipe pvc 100 mtr , hand rivet gun machine , drill bit 6mm dia , drill bit 8mm dia , tape measuring metallic 30 m , mason trowel , tasla iron 18 inch , shovel with wooden handle , axe picks with wooden handle , fawda with wooden handle , crobar 5 feet long , rammer with wooden handle of wt 5 10 kg , sieve for sieving fine and crose agg 900 x 1500mm made of angle iron frame with stand , brick hammer 1 and 2 kgs , cutting plier insulate 6 inch , screw driver 12 inch with insulated plastic , pipe wrench 12 inch , pipe wrench 18 inch , adjustable spanner 12 inch , hacksaw frame with 2 blade , hand gloves canvas with isi mark , aluminium sprit level 6 inch , brick line , plumbob

CTN :41257709

07 Aug, 2025 4.54 Lacs

Khanapur - Karnataka

Tender For supply of materials for development of a public cemetery and construction of a crematorium in tirthakunde village of khanapur taluka. - rubble stones.,, quarry spalls.,, broken stone aggregate 40 mm size,, broken stone aggregate 20 mm size,, broken stone aggregate 12 mm to 10 mm size,, coarse sand (zone iii),, portland cement,., mixer (concrete) - 1 cum capacity.,, silver oak, or equivalent planks 38 mm thick.,, jungle wood runners and plank.,, casurina poles 100 - 150 mm.,, ms flat,., bolts and nuts,, plasticizer / super plasticizer.,., hom of vibrator 0.71 days.,, solid concrete blocks (40x20x20cms) 4.00 n/sqmm, mixer (concrete small used in culvert.), granite / trap broken metal 100 mm and down size, base plate/ base plate, anchor bolts 750mm.,, corbon electrodes.,, welder grade i,, hom of welding and grinding machine.,, add-01, hom of cutting and grinding machine.,, ready mix primer paint (ready mix red lead paint).,, painter class i.,, enamel metal paint.,, unit cost as per the specification,, plastic emulision paint 01, tractor - 40 hp.,, gravel 2.36 mm/murrum,, laboratory asst. (sslc passed)/mate/supervisor,, wheeled dozer (d50 beml),., motor grader 3.35 meter blade.,, water tanker,, vibratory roller 8 tonne,., crushed stone course aggregate 53.,, granite metal 40 mm.,, granite metal 20 mm.,, rcc pipes np2 600mm dia including collars.,, mason class ii (with tools).,., mason class i (with tools).,.,, a 12x12xgauge g.i.wire 100 mtr at ts.800/per m, fitter class i-02, tmt bars including 5 per cent or overlaps and wastage, crane charges., ms angle iron 50mm x 50mm x 6mm, 33.8 metre in length at4.5 kg per metre, ms angle iron 40mm x 40mm x 6mm, 23 metre in length at 3.5 kg per metre,., tmt bars fe 500,., gusset plates 6 mm thick.

CTN :41220357

21 Aug, 2025 NA

Tiruvallur - Tamil Nadu

Tender For supply of mig/mag welding machine

CTN :41196092

14 Aug, 2025 NA

Thiruvananthapuram - Kerala

Tender For supply of anchor bolt hook type 8mm , anchor bolt 6mm , anchor bolt 8mm , pvc coated wire , drill bit 6mm , drill bit 8mm , drill bit 12mm , drill bit 14mm , drill bit 16mm , flush tank , trolley wheels 75 mm dia heavy duty , ss cupboard handle 8 inch , ss drawer slider 16 inch long , drawer wheel 1.5 inch dia heavy duty , 1 inch black screw , 1.5 inch black screw , 1.25 inch black screw , 2 inch black screw , 0.50 inch counter sunk ss screw , 0.75 inch counter sunk ss screw , 1 inch self screw , 1.5 inch self screw , 1.25 inch self screw , 2 inch self screw , 0.50 inch self screw , 0.75 inch self screw , fisher 10mm , fisher 8mm , fisher 6mm , brass screw 2 inch , brass screw 2.5 inch , ss tower bolt 300mm long , glass cutter , m seal 250 g , ss curtain hook cup hook , ss bracket 20 mm dia for hanger rod , joint filler , rubber gloves , scrubber for tank cleaning , mop for tank cleaning , 16mm x 10cm nut and bolt with washer , 12mm x 10cm nut and bolt with washer , 10mm x 10cm nut and bolt with washer , 8mm x 10cm nut and bolt with washer , 6mm x 10cm nut and bolt with washer , calcium silicate false ceiling tile 600x600mm , gypsum false ceiling tile 600x600mm , false ceiling grid main tee , false ceiling grid 4ft tee , false ceiling grid 2ft tee , false ceiling grid 1 inch wall angle , false ceiling grid 0.75 inch supporting angle stay , g.i perimeter section for gypsum ceiling , g.i inter section for gypsum ceiling , g.i section for gypsum ceiling , gypsum screw gyproc for gypsum ceiling , 8mm anchor bolt gyproc for gypsum board , mr gypsum board 8x4 , gypsum joint putty , gypsum joint tape 2 inch , aluminium rivet 3.5mm , rivet gun , star bit , 3.5 mm metal bit , 6mm metal bit , 4mm metal bit , 6mm hilti bit , wheather strip for aluminium door , aluminium door pivot , 12 inch aluminium tower bolt , 8 inch aluminium tower bolt , aluminium door bolt 300 mm , o rubber , aluminium door lock godrej , cylinder lock , acp sheet 3.5mm viva , j corner pvc section , 7 by 8 corner pvc , small wheather strip for cupboard door , autocloser bit , ss autocloser hinge ebco , 0.75 inch gypsaw screw , 1 inch gypsaw screw , 1.5 inch gypsaw screw , 2 inch gypsaw screw , 2 inch wood screw , 3 inch wood screw , 18 inch aluminium cutting wheel , ss door handle 6 inch , gp pipe , ms angle , ms flat , dog chain for cylinders , cup brush for grainding , 6 inch rainwater gutter aqua star , rain water gutter clamp 6 inch , rain water gutter end cap 6 inch , rain water gutter drop 6 inch , rain water gutter connection 6 inch , 25x25mm plastic dummy , 40x40mm plastic dummy , 50x50mm plastic dummy , 60x40mm plastic dummy , 100x100mm plastic dummy , welding glass , welding holder , welding machine male connector , welding machine female connector , welding cable , concrete nail 2 inch , 100x100x4mm ms plate with hole , 150x150x4mm ms plate with hole , self screw bit for sheet , ms nut and bolt 1.5 inch long 8mm thick , gate hinge ms 1.5 inch , gate hinge ms 2 inch , ms aldrop 6 inch , 0.35mm trafford roofing sheet 10ft long , plain roofing sheet 0.35mm thick 2ft width , 0.35mm ridge sheet 8ft , 18 guage g.i plain sheet 8x4ft , banian waste , 3.5mm steel wire rope , 4mm steel wire rope , weld mesh 1 inch x 1inch , fevicol , wpc panal 32 mm thick 0.75x2.00m , wpc panal 32 mm thick 0.85x2.00m , skin door 75 x200 32 mm thick , skin door 90 x200 32 mm thick , magnetic catcher

State Government

CTN :41192318

12 Aug, 2025 3.50 Lacs

Dhar - Madhya Pradesh

Tender For suply of iti item - basic electrical er. book scvt, work shop calulation & science electrical book scvt, work shop calulation & science mechenical book scvt, basic er. drwaing electrical book, basic er. drwaing mecheical book, employer ability skill book, carpainter trade theory book, wire man trade theory book, tracter mechenic trade theory book, fan regulator, aluminum wire 6mm isi mark, aluminum wire 8 mm isi mark, pander holder, casin patti pvc 1 inch, casin patti pvc 1.5 inch, copper wire isi mark celeve insulation, warnish, cotton tap, cilive no. 1 to 7, steel screw 16 by 4, wood polish warnish, copper wire 1.5 mm, copper wire 2.5mm, flaxible wire 25/36, soldring wire, soldring flux, tap isi mark, cotton weste, engine oil crb, drill machine chakkra 5 inch sut with key, lawan remover bush cutter machine carben brush, grinder wheel ( smoth wheel ), oil filter isi mark, disel filter, touch wood polish, wiper, plastic grip, polish, brush kalam, butten holder, fan regulator resistance, bell push switch, ciling rose, angle holder, water colour camel, bombay kill(nail)3 inch, biranji 3 by 4 inch, drill burma, keel 1 inch 2 inch 3 inch, fevicol, sent paper rezmal 0 to 60 no., roll paper 80 no isi, laboratry ovum ilament 500 watt, drill machine 13mm armecher carbon brush, lakdi beat 6 mm to 12 mm, grinder patte 36 40 60 80 no., grinder dick, cutter machine patta 5 inch, grinder patte loha ghisne ka, circuler saw machine cutter 08 inch, circuler saw machine rande ki blade 13 inch, ply 18 mm 4 by 8 isi, ply 12 mm 4 by 8 isi, pipe 2 inch 20 feet long, angle 2 inch 10 ft long, door mate, thinner, prakar, drawing copy, practical copy, cane chair, jangal lakadi satkata babul neem etc, sanmica 4x8, fan bearing 6201/6202, pvc paper 5, 7 no, fan condenser 2.5 mfd, welding electrodes size 2.90 by 3.50mm, tractor fuel pipe line all size, v belt machine all size, nut bolt all size, machin screw all size, half treat steel screw all size

CTN :41129905

05 Aug, 2025 NA

South Andaman - Andaman And Nicobar Islands

Tender For corrigendum : tender for supply of modernized tools f f - 120 pieces industrial tool kit , thread die set , multi size commercial screw driver set , component diagnostic meter (fluke) , cutting flask , nose plier , welding machine wire 100 mtr , multi tool kit 110 pieces , t spanner socket set hex end , plastic tool bag , industrial welding machine , long socket 10 piece 10 mm to 24 mm , creeper working trolley

CTN :40980152

29 Jul, 2025 NA

Bangalore - Karnataka

Tender For corrigendum : supply, installation & commissioning of 600 amps mig / mag welding machine

CTN :41128736

28 Jul, 2025 NA

South Andaman - Andaman And Nicobar Islands

Tender For tender for supply of modernization of tools f f - 120 pieces industrial tool kit , thread die set , multi size commercial screw driver set , component diagnostic meter fluke , cutting flask , nose plier , welding machine wire 100 mtr , multi tool kit 110 pieces , t spanner socket set hex end , plastic tool bag , industrial welding machine , long socket set 10 piece 10 mm to 24 mm , creeper working trolley

Mag Welding Machine Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government