Latest maganetic equipments Tenders | Government maganetic equipments Tenders

State Government

CTN :39996366

06 May, 2025 3.45 Crore

Kanchrapara - West Bengal

Tender For supply, storage, installation, commissioning and trial run of electro-mechanical equipment at raw water and clear water pumping station under kanchrapara municipality. - for rwps, supply, delivery , storage, installation, testing & commissioning of vertical turbine type centrifugal pump with cashion pipe ,column assembly, discharge head, sole plate, motor stool and all other accessories all complete of 750m /hr discharge at a head of 29 mtr at duty point as per technical specification . maximum allowable speed of pump shall be 1000 rpm., supply, delivery , storage, installation, testing & commissioning of vertical, scim ,tfec, 110 kw (minimum), 415 v 10% , 50hz 05%, speed 1000 rpm (syn) , to vertical pump duty motor to match with pump at sl no- (1) complete with coupling hub and all other accessories as per specification., supply, delivery , storage and installation at site of ms pipes, specials, joints, flanges as per specification and technical offer. (for both individual pump delivery pipe and extended part of common manifold if required) ., supply, delivery and installation and commissioning of valves complete at site with fixture as per specification and technical offer & as follows :-, di butterfly valve for delivery side of pump fitted with electrical actuator suitable for local and control desk operation and display system for the individual pump delivery pipe line. (350 mm minimum))(pn 16 type), di non-return valve for individual pump delivery pipe line. (350 mm. minimum))(pn 16 type), supply, delivery at site and storage of m.s. dismantling joint assembly for the individual pump delivery pipe line as per specification (350 mm minimum)., supply, delivery ,storage and installation at site of pressure gauges complete with fittings and fixture as per specification, pressure gauge for delivery side (0 10 kg / cm2), supply, delivery ,storage and installation at site of pressure transmitter complete with fitting and fixture as per specification as follows:-, pressure transmitter for delivery side ( 0 10 kg / cm2 ), supply, delivery at site and installation of m.s. structural materials for cable tray / rack, panel installation supports, pipes & valves supports, fabricated stairs & all other fabrication work., lt panel, modification / retrofitting/expansion/addition of the existing pmcc with supply , delivery & installation of a new additional motor starter feeder at rwph in order to accomodate the extra pump-motor feeder of requisite rating not less than 110 kw .the modification/addition should match/synchonise the existing panel and should ensure smooth operation of the complete panel as a single entity and should be fit to install at the existing pump house., retrofitting of existing control desk at site with supply,wiring, installation of additional items like temparature scanner , multifunction meter , microprocessor based position indicator, digital pressure indicator,tnc switch, push button switch, indication lamps etc .as required to complete for the new pump motor set., supply ,delivery, laying, installation of power cable of adequate size from motor feeder to motor .(min. 2 run x 3core , 185 sq mm xlpe armoured al. for each feeder), supply ,delivery, laying, installation of power cable of adequate size and length from pmcc to motor space heater . (min. 3 core 2.5sq mm. armoured cu for each motor), supply ,delivery, laying, installation of power cable of adequate size and length from pmcc to valve actuator etc. elsewhere required. (min . 4 core 2.5 sq mm. armoured cu), making end termination of all the power cables as stated in sl no 11,12,13 with all necessary equipments like termination kits(dry type), lugs , glands etc , installed for the modification job., supply ,delivery, laying, installation of control cables of different size as required for the purpose and length for completing the different control connections between control desk, motor feeders , lpbs, pmcc etc.to the satisfaction o

State Government

CTN :39998276

26 Apr, 2025 15.27 Lacs

Mumbai - Maharashtra

Tender For est. no. ow/c/ha/3404/2024-25 providing renovation to electrical and lan wiring with fans and light fittings at the office of court receiver, 2nd floor, bank of india building, m.g. road, fort, mumbai 32

State Government

CTN :40022299

22 Apr, 2025 54.7 Thousand

Kannur - Kerala

Tender For general-setting up of temporary building for the judicial first class magistrate court(iii) at kannur--providing light fittings and ceiling fan and balance electrification-general electrical work

State Government

CTN :40030633

24 Apr, 2025 13.09 Lacs

Alappuzha - Kerala

Tender For deposit-ksstm -science city kottayam -development activities -food court building-supply and installation of electrical fittings and providing power supply to the 6 passenger lift and lift shaft wiring-general electrical work

State Government

CTN :39984874

30 Apr, 2025 NA

Kolkata - West Bengal

Tender For necessary light fittings, wall mounted fans, 2ftx2ft recessed mounted led luminaire led at the chamber of the judicial secretary and pa room of block no. ii 2nd floor) of writers buildings under writers buildings electrical section no. ii, pwd

Central Government/Public Sector

CTN :40019159

21 Apr, 2025 2.59 Lacs

Kanpur - Uttar Pradesh

Tender For providing electrical power points lan points wall fans replacement of old lights fittings and rewiring of circuits with allied works in room no 129 aces in academic area in the campus at iit kanpur

State Government

CTN :39855018

25 Apr, 2025 27.48 Lacs

Burdwan - West Bengal

Tender For corrigendum : supply and installation of electrical fixtures and gadgets in bolpur ib at bolpur under burdwan zone in west bengal. - supply & delivery of 3 phase 415v fixed speed cassette type air-conditioner machine having cooling capacity not less than 14100w, eer 2.7 to 3.2, noise level not more than 56db. this cassette type air conditioning machine should be fitted with scroll compressors, lcd remote & all other accessories suitable for refrigerant-r32/r410a. (make-o-general /mitsubishi electric/mitshubishi heavy industries as per approved by eic/authority)., supply & delivery of 240v split air-conditioner machine having cooling capacity not less than 6875 w, isser 3.8 to 4.39, bee rating not less than 3 star, noise level not more than 46db. this split air conditioning machine should be fitted with rotary compressors, lcd remote & all other accessories suitable for refrigerant-r32/r410a. (o-general /mitsubishi electric /mitshubishi heavy industries as per approved by eic/authority)., installation, testing & commissioning of the above-said split ac outdoor unit on existing iron structure and indoor unit on wall & mending good the damages as per direction of e.i.c., installation, testing & commissioning of the above-said split ac outdoor unit by fixing iron angle unit on wall & mending good the damages as per direction of e.i.c., supply & installation of extra add-on items- hvac grade 5/8"(for suction) & 3/8"(for discharge) 1.15mm thickness copper refrigerant pipe with 9mm thick nitrile rubber insulation including shaddle,screw, insulation tape, fastner etc for above ac machine as per direction of eic., supply & installation of extra add-on items- hvac grade 5/8"(for suction) & 1/4"(for discharge) copper refrigerant pipe with 9mm thick nitrile rubber insulation including shaddle,screw, insulation tape, fastner etc for above ac machine as per direction of eic., supply & installation of extra add-on items- hvac grade 1/2"(for suction) & 1/4"(for discharge) copper refrigerant pipe with 9mm thick nitrile rubber insulation including shaddle,screw, insulation tape, fastner etc for above ac machine as per direction of eic., supply & laying of 4core 2.5sq.mm 1.1 kv insulation grade sheathed cu cable with gas line as per direction of eic for making interconnection/communication between indoor to outdoor unit of split type ac m/c.(make- havells/finolex/polycab as approved by e.i.c), supply and laying 5/8(20mm) heavy type pvc pipe for water drainage., supplying, fabrication & fixing of iron stand of m.s. angle size (40 mm x 40mmx6mm) for installation of outdoor unit of 4.0 tr split ac incl. drilling 2 nos holes in each angle and horizontal angle angle 40 mm x40mm x 6 mm in each stand. each stand will be properly fixing by supporting angle (25x25x5mm) and flushnut on peripheral wall as per machine configuration & load with adequate service access as per direction of eic, supplying and fixing 415 v four pole mccb of breaking capacity 25ka/35ka with fixed thermal and fixed magnetic / adjustable thermal and fixed magnetic setting in existing dbs / enclosure and necessary connection (a) 160 amp fp mccb (make legrand/crabtree/siemens/l&t/ abb as approved by e.i.c) [d-8/10], supplying and fixing 240/415 v mcb of breaking capacity 10ka & c characteristics on din rail of existing dbs and necessary connection (make legrand/crabtree/siemens/l&t/abb as approved by e.i.c) [d-6/7] (a) 6-32 amp tp mcb, distribution wiring in 1.1 kv single core stranded fr pvc insulated & unsheathed copper wire (brand approved by eic) in 20mm size pvc rigid conduit fr (precision make) incl. necy. fittings as required[e-14] i) 2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) ecc [e-14/ 1(a)(iii)], s & f 3phase 9-15a , 415 v dol starter (make-l & t ,cat no. ss94351 or equivalent model of abb/siemens as per dierction of e.i.c) to be fixed on wall with all fixing accessories complete as

Central Government/Public Sector

CTN :40025392

06 May, 2025 3.23 Crore

Ranchi - Jharkhand

Tender For supply of providing operation and maintenance services for 1st year , providing operation and maintenance services for 2nd year , testing bdv value of transformer oil for 1st year , testing bdv value of transformer oil for 2nd year , dehydration and filtration of transformer oil for 1st year , dehydration and filtration of transformer oilfor 2nd year , servicing, maintenance and testing of air circuit breaker for 1st year , servicing, maintenance and testing of air circuit breaker for 2ndear , servicing, maintenance and calibration of earth fault for 1st year , servicing, maintenance and calibration of earth fault for 2nd year , servicing, maintenance and testing of 33 kv ht for 1st year , servicing, maintenance and testing of 33 kv ht for 2nd year , calibration of following equiments annually clinometer for papi , repair of led type 15w search light , painting of perimeter or street light pole upto 5.0 m , painting of perimeter or street light pole above 5.0 m upto 9.0 m , painting of lt panels with synthetic enamel , painting of elevated type runway edge light , repair of siren etc. , repair of crash bell , supply of 4.00 sqmm 3 core flat cable pvc , supply of following size multicore flexible cable, 2 x 2.5 sqmm , supply of following size multicore flexible cable, 3 x 2.5 sqmm , supply of medium intensity aviation obstruction light , supply of cable trench cover of 10 mm thick , supply of siren minimum audible upto 1 km , supply of crash bell or gong bell 12 inch , 200 w 6.6 a bipin runway halogen type lamp , 105 w 6.6 a halogen lamp for inset fittings , 200 w 6.6 a elevated approach halogen type lamp , runway bi pin lamp holder , 6 sq.mm 5 kv grade plug and recaptable , 16 sq.mm 5 kv grade plug and recaptable , secondary 2 pin lead of 0.3 mtr length , two pin secondary plug assembly for papi , led signage converter capable to drive led strips of 5.5w , led signage strip of 0.5 w for 11 nos. in one strip , medium intensity elevated type omni directional , breakable coupling for ama make glf light fittings , isolating transformer 200 w, 20 , isolating transformer 200 w, 6.6 , isolating transformer 45 w, 20 , isolating transformer 45 w, 6.6 , isolating transformer 15 w, 20 , isolating transformer 15 w, 6.6 , isolating transformer 300 w, 6.6 , 360 clear inner lens filter for runway edge light fitings , 360 clear outer lens filter runway edge light fitings , 180 deg clear inner lens filter runway edge light fitings , 180 deg red lens filter runway edge light fitings , 180 deg yellow lens filter runway edge light fitings , red lens for papi , clear lens for papi , red spreader lens for end light fiting , green spreader lens for threshold light fiting , reflector for papi , ht tape for afl cable , pvc tape , identifying cable fault of the defective power cable by using cable tracer lt cable , identifying cable fault of the defective power cable by using cable tracer lt cable ht cable 33 kv grade , sitc of slim type guidance sign board of various sizes , supply of airfield signage facia sheet 4 mm thick made of poly carbonate sheet , dsr 2022 cpwd electrical items rs. 1000000.00

Central Government And Public Sector

CTN :40035104

25 Apr, 2025 90.4 Thousand

Bengaluru - Karnataka

Tender For replacement of false ceiling lights with led fittings and miscellaneous electrical works in pgm chamber telephone house rajbhavan road bengaluru.

corporations/Associations/Others

CTN :39995388

24 Apr, 2025 2.89 Lacs

Kolkata - West Bengal

Tender For supply electrical item led fittings for street lighting system on existing pole at sukanta sarani and other different areas in ward no 123

Maganetic Equipments Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors