Latest magnetic board Tenders | Government magnetic board Tenders

CTN :45034325

09 May, 2026 NA

Delhi - Delhi

Tender For tender for supply of 708.131.070.000 , paste silcon , rt876-1/41en blk , shrink tube , loctite 262-50cc , sealant fast curing , hi/nk , emery paper silicon carbide wp , ib-9105726 , rule steel engrs 12x9/8x0.040 thick

CTN :45036193

05 May, 2026 NA

Delhi - Delhi

Tender For expression of interest document for supply and delivery of school requisites 2026 for secondary schools (design and technology) - supply and delivery of school requisites 2026 for secondary schools (design & technology) - angle grinder, band saw, bench drilling machine, bench grinder, circular saw, compressor, spraygun, drilling machine (portable), extension cable, hot wire cutter, jig saw (portable), metal lathe, planer / thicknesser, router (portable), sander -orbital, soldering iron, strip heater, welding machine, wood working lathe, abrafile frame, adjustable spanner, adjustable spanner, anvil, bench hook*, bench shear (guillotine), bradawl, carpenters mallet, centre punch, centre square, chisels- mortice, chisels- mortice, chisels -bevelled edge, chisels -bevelled edge, chisels -bevelled edge, chisels- firmer, chisels- firmer, chisels- firmer, cold chisels, combination drill, combination pliers, coping, saws, corner clamps, countersunk bit, dividers, engineers square, engineers vice, forstner bit, g cramps, g cramps, hacksaw, hammer: ballpein, hammer: ballpein, hammer: ballpein, hammer claw, hammer cross pein, hand drill, hand files including handles, hand files including handles, hand files including handles, hand saws, hand saws, inside calipers, jack plane, jenny calipers, junior hacksaw, machine vice, marking gauge, marking knife, measuring tape, metalwork bench, mitre box, mole grip, nail punch, needle files, oil can, oil stone, outside calipers, pincers, pipe wrench, rasps, ring spanner, riveting machine kit, router bits, sash cramps, saw set, screw driver, screw driver, scriber, sliding bevel, smoothing plane, spanner - open ended, spirit level, spoke shave, spoke shave, steel rule, taps and dies, tenon saws, tinmans snip, tinmans snip, try square, v-block and clamp, vernier calliper, wire brush, woodwork bench, woodworkers bench vice, blackboard compasses, blackboard protractor, blackboard rule, blackboard set squares, design tables, isometric-grid blackboard*, square-grid blackboard*, whiteboard compasses, abrafile blades, coping saw blades, emery cloth, emery cloth, emery cloth, goggles, hacksaw blades, junior hacksaw blades, masks - respiratory, masks - dust, paint brush*, paint brush*, paint brush*, welding apron, welding gloves, welding rods.

CTN :45024888

19 May, 2026 2.65 Lacs

Dehradune - Uttarakhand

Tender For supply of smt mechanical tools for mt d d - bty charger , air compressor , bench vice , potable welding set , hand drill machine , paint spray gun , workshop tray , multi meter , socket set tool 6 , socket set tool , creeper trolley , hydraulic trolley , hydraulic trolley jack , gear box trolley jack , soldering iron , blow lamp , tap set , torque wrench , die set , tool box steel , double ended spanner , ring spanner 6 by 7 , ball pin hammer , cold chisel 10 , cold chisel 6 , brass drift , centre punch , file flat basted 12 inch , file smooth , file square , file round , scissor , cutting plier , circlip plier inside , circlip plier out side , nose plier , screw driver flat 12 , screw driver flat 10 , screw driver flat 06 , screw driver flat 04 , screw driver philips 12 , screw driver philips 10 , screw driver philips 06 , screw driver philips 04 , screw driver 2 in 1 , ellen key set hexagonal , star ellen key key set , filler gauge , filter opener big size , filter opener small , square ellen key for drain oil , adjustable spanner , 2 in 1 spanner 6 , pipe wrench 12 , steel rule ) /bid number : gem/2026/b/7483093 * /dated: 28-04-2026 & & / bid document 1 / 42

Central Government/Public Sector

CTN :44971324

02 May, 2026 NA

Bhadravati - Karnataka

Tender For supply of stationery 15 items : : - gum bottle 300 ml , cello tape , punching machine , gum tape -brown , gem clip-plastic coated , pencil , staplet pins small , stamp pad size 110 mm x 70 mm , staple-small , pin box , steel foot rule 12 inches , stamp pad ink 60 ml , chalk piece , folio note book size long , student note book small

Central Government/Public Sector

CTN :43988175

23 Apr, 2026 NA

Delhi - Delhi

Tender For bid to ras bid to ras supply of stationery items for lok sabha secretariat c c -dura cell aaa , green tag , tumbler , pilot pen , calculator , uniball , gel impact pen , plastic folder , magnetic nonmagnetic duster , stapler wire , double hole punching machine , binder clip , cd marker pen , double sided tape , attendance register , drawing pins , eraser , file band , file board , gem clips , glue bottle , ink violet for stamp pad , jute twins , paper weight , note book shorthand for reporters , note book shorthand , note sheet azure , pencil lead , pencil shorthand , pencil red , pencil blue , pocket stapler , peon book , pin cushion , punch steel , register 3 qr. , el register , stamp pad , tag white , envelopes , photocopier paper full scape , paper ruled , pen holder , cello tape , brown tape , pencil cell , foot rule , glue stick , jotter refill , water jug , pen stand , permanent marker pen , cover for tumbler , rubber band , sharpener , stapler , stapler pin , tray plastic , ordinary pen , scissor ) /bid number: gem/2026/b/7223829 * /dated: 12-02-2026 & & / bid document1 / 55

CTN :44952908

28 Apr, 2026 NA

Multi City - West Bengal

Tender For auction sale of rolling stock - lot no.divn/nmp/14/04/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond.8w/wgn. without contents if any. 1) se 10079767759 boxnel (nlb) 2) sc 10099860126 boxnm1 (nlb) 3) se 30079303863 bcnam1 (nlb) 4) sc 10099763168 boxnm1 (nlb) 5) special repair 25069660255 boxnr (nlb) steel body 6) se 10079765656 boxnm1 (nlb) 7) se 10079771299 boxnm1 (nlb) 8) se 25079777622 boxnr (wm) steel body 9) se 10079771480 boxnm1 (wm) 10) sc 10099762840 boxnm1 (wm) nb: (1) : i) wagons are to be sold without 14 nos. nlb trolleys against special repairl. no. 01 to 07. ii) wagons are to be sold with 06 nos. wm trolleys against special repairl. no. 08 to 10. iii) wagons special repairl no 01 to 10 to be sold without 40 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting as per latest excluded fitting list * * excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded fitting along with nlb trolleys are to be handed over by the purchaser to sse/w-yard/nws/kgp and wheel sets to sse-44/nws/kgp respectively at nominated location suggested by the concerned sse respectively for which they have to arrange labour,tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 percent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is dam aged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3) the firm shall follow all rules regarding the loading of vehicle as per rto/statuary body governed time to time. railway will not be responsible any breach of rule during loading /transportation done by the purchaser. nb: (4) delivery will be given in numbers.

CTN :44952909

28 Apr, 2026 NA

Multi City - West Bengal

Tender For auction sale of rolling stock - lot no.divn/nmp/13/04/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond.8w/wgn. without contents if any. 1) se 25079882746 boxnr (nlb) steel body 2) wr 10089762577 boxnm1 (nlb) 3) special repair 10069749680 boxnm1 (nlb) 4) nr 75039288897 bobsnm1 (nlb) 5) se 75079216027 bobsnm1 (nlb) 6) nr 75039188142 bobsnm1 (nlb) 7) se 75079217901 bobsnm1 (nlb) 8) cr 10019660348 boxnm1 (wm) 9) sc 25099661857 boxnr (wm) steel body 10) sc 30099368064 bcnam1 (wm) nb: (1) : i) wagons are to be sold without 14 nos. nlb trolleys against special repairl. no. 01 to 07. ii) wagons are to be sold with 06 nos. wm trolleys against special repairl. no. 08 to 10. iii) wagons special repairl no 01 to 10 to be sold without 40 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting as per latest excluded fitting list * * excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock-a) all excluded fitting along with nlb trolleys are to be handed over by the purchaser to sse/w-yard/nws/kgp and wheel sets to sse-44/nws/kgp respectively at nominated location suggested by the concerned sse respectively for which they have to arrange labour,tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 percent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is dam aged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3) the firm shall follow all rules regarding the loading of vehicle as per rto/statuary body governed time to time. railway will not be responsible any breach of rule during loading /transportation done by the purchaser. nb: (4) delivery will be given in numbers.

CTN :44952910

28 Apr, 2026 NA

Multi City - West Bengal

Tender For auction sale of rolling stock - lot no.divn/nmp/16/04/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond.8w/wgn. without contents if any. 1) se 75079216171 bobsnm1 (nlb) 2) se 75079216508 bobsnm1 (nlb) 3) nr 75039160063 bobsnm1 (nlb) 4) se 10079765663 boxnm1 (nlb) 5) se 10079772524 boxnel (nlb) 6) se 10079758115 boxnm1 (nlb) 7) se 25079663093 boxnr (nlb) steel body 8) se 10079618419 boxnm1 (nlb) 9) cr 10019860489 boxnm1 (nlb) nb: (1) : i) wagons are to be sold without 18 nos. nlb trolleys against srl. no. 01 to 09. ii) wagons srl no 01 to 09 to be sold without 36 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting as per latest excluded fitting list * * excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded fitting along with nlb trolleys are to be handed over by the purchaser to sse/w-yard/nws/kgp and wheel sets to sse-44/nws/kgp respectively at nominated location suggested by the concerned sse respectively for which they have to arrange labour,tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 percent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is dam aged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3) the firm shall follow all rules regarding the loading of vehicle as per rto/statuary body governed time to time. railway will not be responsible any breach of rule during loading /transportation done by the purchaser. nb: (4) delivery will be given in numbers.

CTN :44952911

28 Apr, 2026 NA

Multi City - West Bengal

Tender For auction sale of rolling stock - lot no.divn/nmp/17/04/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond.8w/wgn. without contents if any. 1) se 75079216058 bobsnm1 (nlb) 2) sc 75099260017 bobsnm1 (nlb) 3) nr 75039160384 bobsnm1 (nlb) 4) se 75079215549 bobsnm1 (nlb) 5) sc 10099563003 boxnm1 (nlb) 6) cr 25019660182 boxnr (nlb) steel body 7) se 10079665512 boxnm1 (nlb) 8) er 75029260131 bobsnm1 (nlb) 9) se 75079260402 bobsnm1 (nlb) 10) se 75079216409 bobsnm1 (nlb) nb: (1) : i) wagons are to be sold without 20 nos. nlb trolleys against srl. no. 01 to 10. ii) wagons srl no 01 to 10 to be sold without 40 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting as per latest excluded fitting list * * excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded fitting along with nlb trolleys are to be handed over by the purchaser to sse/w-yard/nws/kgp and wheel sets to sse-44/nws/kgp respectively at nominated location suggested by the concerned sse respectively for which they have to arrange labour,tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 percent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is dam aged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3) the firm shall follow all rules regarding the loading of vehicle as per rto/statuary body governed time to time. railway will not be responsible any breach of rule during loading /transportation done by the purchaser. nb: (4) delivery will be given in numbers.

CTN :44952912

28 Apr, 2026 NA

Multi City - West Bengal

Tender For auction sale of rolling stock - lot no.divn/nmp/18/04/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond.8w/wgn. without contents if any. 1) sc 75099160362 bobsnm1 (nlb) 2) se 75079215969 bobsnm1 (nlb) 3) er 75029260018 bobsnm1 (nlb) 4) er 75029279515 bobsnm1 (nlb) 5) sc 25099660928 boxnr (nlb) steel body 6) cr 10019501733 boxnm1 (nlb) 7) er 30029063151 bcnm1 (nlb) 8) se 75079215297 bobsnm1 (nlb) 9) nr 75039260190 bobsnm1 (nlb) 10) er 30029061645 bcnm1 (wm) nb: (1) : i) wagons are to be sold without 18 nos. nlb trolleys against srl. no. 01 to 09. ii) wagons are to be sold with 02 nos. wm trolley against srl. no. 10. iii) wagons srl no 01 to 10 to be sold without 40 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting as per latest excluded fitting list * * excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock-a) all excluded fitting along with nlb trolleys are to be handed over by the purchaser to sse/w-yard/nws/kgp and wheel sets to sse-44/nws/kgp respectively at nominated location suggested by the concerned sse respectively for which they have to arrange labour,tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 percent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is dam aged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3) the firm shall follow all rules regarding the loading of vehicle as per rto/statuary body governed time to time. railway will not be responsible any breach of rule during loading /transportation done by the purchaser. nb: (4) delivery will be given in numbers.

Magnetic Board Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector