Latest magnetic particle testing Tenders | Government magnetic particle testing Tenders

CTN :41884360

17 Nov, 2025 NA

Kamrup - Assam

Tender For bid to ras supply of urine pregnancy test , sterile cotton swab individually packed in screw capped polypropalene tube , disposable esr tube western green , urine strips bott of 100 , dengue ns1 ag card and igm and igg ab , widal test kit kit of 4x 5ml , rapid pap stain 1a coma 2b coma 3b , cyto spray , disposable microtome biade for sleec rotatory microtome , ethanol absolute alcohol ar , embedding ring plastic , sterile cotton swab individully packed in screw capped polypropalene tube , pa coliform kit for water testing pack of 10 test , paraffin wax for use in histopathology , g6pd qualitative test , leishman stain , part no 105652337 multistix r 10 sg 10 parameteres 100 strips slash bottle , occult blood test kit , sterilke petridish disposable 09 cm diameter , zn stain kit , lj medium slant 10 bott , sabouraud dextrose agar , widal test kit kit of 4x5ml , ra factor test kit , aso titre , cryptococcal ag leteral flow assay test , rapaid typhi dot lgm and lgg card test , pt reagent 12x4 ml compatible with semi automated coagulation analyser model minus act minus 4 , aptt reagent with cacl2 5x2 ml plus 10 ml compatible with semi automated coagulation analyser model act minus 4 , cuvettes 700 pcs compatible with semi automated coagulation analyser model minus act minus 4 , bio rad lypocheck diabetes control kit for fully automated biochemistry and electrolyte analyser kit pack 6x0 dot 5ml , bio red liqicheck urine chemistry control l1 kit for siemens dimension exl 200 fully automated biochemistry and electrolyte analyser 12x10 ml , bio red liqicheck urine chemistry control l2 kit for siemens dimension exl 200 fully automated biochemistry and electrolyte analyser 12x10 ml , dextrose monohydrate for oral use in pack 100 gm with or without vitamins and minerals , viral transport medium with strerile dacron slash nylon nasopharyngeal and oropharyngeal swab sticks icmr approved dot , micropipettes coma tips for 1 minus 200 ul , micropipettes coma tips for 500 minus 200 ul , paper coma fitter coma square green coma s no 795 51cm coma pkt of 100 , slide coma microscope thickness 1 dot 15 to 1 dot 35 mm size 75mm x25 mm , acetone commercial , alcohol dehydrated , blood agar base infusion agar , cled agar with thymol blue , liquor formaldehyde 40 percent w slash v , d p x mounting med , keto diastix bott of 50 strips , mac conkey agar , mueller hinton agar , xylene xylol pure , pt reagent kit of 25 test , organically embedded nano particle antimicrobial and antiviral nitrile mitt without activator minus medium , organically embedded nano partical antimicrobial and antiviral nitrile mitt without activator minus large , organically embedded nano partical antimicrobial and antiviral nitrile mitt without activator minus extra large , solvent free facecal parasite concentrator with patented high density polethelene compatibility box of 30 unit , stain giemsa ready to use , pulv glucose 500 gm pkt , vidas vit b 12 total pack of 60 test //bid details 2 / 46

CTN :42681393

27 Nov, 2025 5.00 Lacs

Hisar - Haryana

Tender For supply of various tools at govt. iti nalwa - wood work technician, bevel square 150 mm (i) blade material- stainless steel, hardness- 418 hv to 460 hv(ii) stock material cast iron, fully painted(iii) wing nut and bolt material: m.s.(iv) measuring range 0 to180 (v) approx.weight-150gram(vi) operation-for testing any angle, claw hammer 500 gram (i) head made by heat treated steel, hardened upto 46 to 58 hrc with curved claw.(ii) handle 300mmx30mm dia.made by hardwood(rosewood)(iii) operation-for striking and nailing, hand brush for cleaning 450mm (i) bristle material: mexican fibre, sisal fibre, bristle length 70mm, tampico fibre, fixingin hardwood/ plastic(ii) operation-for workbench cleaning, mallet medium size (i) handle size- over all length- 385 mm, toe side- 40mm(w), 25 mm(t), heel side- 30 mm(w), 22 mm(t)(ii) made by hardwood (rosewood)(iii) operation- for striking, carpenter mortise gauge (i) adjustable spur strip 300 x 8 x 8mm 2mm, made by brass(ii) fixed spur strip size 20x8x8mm 1mm(iii) adjustment thumbscrew length15mm 2mm, dia. 15mm 2mm and shank 9mm 2mm, made by brass(iv) brass pull side and thumbscrew to enhance in gauge (v) operation-for marking along and across the grain for double line (mortise) , marking knife (i) overall length tip to handle end 200mm 2mm(ii) blade length 65mm 5, width-25mm 2, thickness- 4mm 1mm(iii) tang length-20mm, thickness 4x4mm square(iv) blade material high carbon steel, marking point sharp and 60 degree angle for accurate marking(v) handle length120mm 5,diameter15mm 2 and gripping point 10mm 2mm(vi) handle made of hardwood (rosewood)(vii) ferrule length15mm, dia.10mm,material m.s.gauge 18swg.(viii) blade hardness-60hrc(ix) operation-for marking, mortise chisel (set of 3 ) (i) overall length 250mm 5mm(ii) mortise blade width 6mm, 10mm, 15mm, thickness 15mm, cutting edge angle30 - 35 ,neck to cutting edge length150mm 4mm, tang length 40mm 2mm, uppersize- 4x4mm, lower 2 x 2mm 1mm(iii) blade length 100mm 3mm each.(iv) handle length120mm 5mm, handledia. 25-30mm 2mm, material hardwood (rosewood)(v) ferrule size length25mm,dia. 20mm,18 swg. material:m.s.(vi) steel hoop dia.-20 ,thickness-5mm 1mm, material:m.s.(vii) blade material, high carbon steel(viii) blade hardness 55 57 hrc(ix) operation-for chiselling, electric heater (i)1000/1500wattelement,standdimensions(lxwxh)-250x250x85mm(ii) madeofironheatingplatesize-200mm,heatingplatematerial-chinnimitti,nichromewirewithsturdytopoperation-for absorbing moisture ofwood, twist drill bits (set of 4 ) 6,8,10,12mm (i) cuttingangle-30 (ii) hardness:760 hrc to 900 hrc(iii) material: high speed steel(iv) operation-for drilling, cabinet scraper (i) dimensions: length-100mm ( 1) width-100mm ( 1) thickness-1mm min.(ii) material: spring steel(iii) wooden handle size-110x30x20mm,material:hardwood(rosewood),fitted with rivet(iv) operation-for scrapping, gauge chisel, scribing (set of 5 ) 6mm,10mm,12mm,16mm,20mm (i) blade material: high carbon steel(ii) cutting angle: 25 5 (iii) blade hardness- 55 to 61 hrc(iv) operation-for scribing , plumber, item name :-"v" block pair 7cm with clamp (i)size: length 7cm, width 45mm, height 45mm.(ii) material: hardened steel or cast iron(iii) v-groove angle: generally 90 degree , item name :-"v" block pair 15cm with clamp (i) sizelength: 15cm. width 75mm, height 75mm(i) material: hardened steel or cast iron(iii) v-groove angle:- generally 90 degree, item name :-bench vice 150mm (i) jaw width - 150mm ,jaw opening capacity: 150-175 mm(ii) jaw depth-70-85mm(iii) material:- cast iron body.(iv) weight: 15 - 20 kg(v) spindle :- mild steel(vi) handle : carbon steel or alloy steel(vii) thread type: acme thread (square thread)(viii diameter: around 20-25mm(ix) length: 250mm to 300 mm, item name :- metal-l 15cm (i)type : metal l square(ii) size : each arm of the l 15cm (150mm) width-20 mm(iii) material : stainless steel or carbon steel(iv) shape : 90 angle between two arms(v) accuracy : 0.01mm (vi)finish : anti rust coating, item name

State Government

CTN :42334379

17 Nov, 2025 NA

Multi City - Telangana

Tender For corrigendum : tggenco - nshes - supply of certain consumables at nshes, nagarjunasagar. - fevicol sr-998 1kg, bearing grease, 1kg, molykote br2 plus, rustolene (in 1 litre cans), bearings grease of servo make (in 10 kg pack), asbestos cloth, 3mm thick, 1 mtr width, welding helments sigma brand, brush, paint. size:50 mm., length:2 inch, brush,paint, size:75 mm., length:3 inch, wire brushes, 5 rows, goggle: type:grinding, rod nylon, 20mm thick, pvc dotted cotton hand gloves, pressure gauge, 0-15kgf/cm2,4 inch, 3/8 inch bsp, teflon tape size: 12.5x12mtrs. x0.075mm, cutting wheels ag4, grinding wheel ag4, wheel, buffing, sponge, 6 inch x 3.5 inch x 2 inch, abrasive cloth, type:rough, material:emery, grit-36, size: 9 inch x 11 inch, abrasive, cloth, type:smooth, material:emery, grit-100, size: 9 inch x 11 inch, braided pvc flexible hose for air, id:12.5 mm, working pressure: 7.5 kg/cm2, nylon braided rubber hose,id-24mm,od-34mm, working pressure 15kg/sqcm, oxygen regulator, two stage with two gauges, make: esab, acetylene regulators, 2 stage with 2 guage, make: esab, neoprene rubber chord 10 mm dia, rechargeable torch light, 30watt, model:digi led dl30, make: eveready, nylon cable ties, size: 400 mm, tie, cable, nylon, size: 300mm, tie, cable, nylon, size: 250mm, tie, cable, nylon, size: 200mm, tie cable, nylon, size: 150mm, tie cable, nylon, size: 100mm, terminal block, porcelian, 2pin,6a, terminal block, plastic, 2pin,6a, copper lug, 1.5sqmm, rectangular-pin type, with ins sleeve, copper lug, 1.5sqmm, fork type, with ins sleeve, for 4mm stud, copper lug, 1.5sqmm, ring type, with ins sleeve, for 6mm stud, copper lug, 2.5sqmm, rectangular-pin type, with ins sleeve, copper lug, 2.5sqmm, fork type, with ins sleeve, for 6mm stud, copper lug, 2.5sqmm, fork type, with ins sleeve, for 4mm stud, lug,copper, 2.5sqmm, ring, pre insulated, double grip6mm, copper lug, 2.5sqmm, ring type, with ins sleeve, for 10mm stud, copper lug, 2.5sqmm, ring type, with ins sleeve, for 4mm stud, copper lug, 4sqmm, ring type, with ins sleeve, for 10mm stud, copper lug, 4sqmm, ring type, with ins sleeve, for 8mm stud, copper lug, 4sqmm, ring type, with ins sleeve, for 6mm stud, tape, electrical, type:insulation, material:pvc, color:red, width: 18mm, length: 7 mtr, tape, electrical, type:insulation, material:pvc, color:yellow, width: 18mm, length: 7 mtr, tape, electrical, type:insulation, material:pvc, color:blue, width: 18mm, length: 7 mtr, tape, electrical, type insulation, material:pvc, color:black, width: 18mm, length: 7 mtr, bolt,w/nut, spring and flat washer, ht gr. 10.9, m20x98 mm, half thread, bolt,w/ nut and sprig washer, ht gr. 10.9, m20x60 mm,full thread, bolt w/nut and spring and flat washer, ht gr. 10.9 m16x70 mm, full thread, bolt.w/nut and spring and flat washer, ht gr. 10.9 m16x45 mm, full thread, bolt,w/nut and spring and flat washer ht gr. 10.9. m12x40mm,full thread., bolt w/ nut and spring and flat washer, m20x80 mm, ht gr.10.9, half thread, dye penetrant testing (dpt) kit containing cleaner, penetrant and developer, pack of 03 nos., chloroprene rubber o-ring cord. dia:6 mm, length: 10 mtr., chloroprene rubber o-ring cord, dia:8 mm, length: 10 mtr., fuse hrc 32a, 500v ac, din, s-00, make: siemens, fuse hrc 63a,500v ac, din, s-00, make: siemens, fuse, hrc, 200a, 500v ac, din, s-00 make: siemens, terminal block, bakelite, 2 way,6a 230v, terminal block bakelite 3 way 16a 415v, terminal block bakelite 4 way 30a 415v, terminal block, porcelian 3 way,164,415v, nylon rope diameter: 12mm, colour: yellow/white type: braided, length: 100 meters roll, gas cutting hose (red). (1 no may be read as 1 meter), gas cutting hose blue (1 no, may be read as 1 meter), socket countersunk head cap screw, m8x20 mm. allenkey size: 5mm make: unbrako (part no. 103340)

Central Government/Public Sector

CTN :42730646

21 Nov, 2025 NA

Lucknow - Uttar Pradesh

Tender For supply of set of magnetic particle testing kit

CTN :42732313

16 Dec, 2025 NA

Howrah - West Bengal

Tender For supply of procurement of grey coloured dry magnetic powder for magnetic particle testing etc.

CTN :42685227

25 Nov, 2025 NA

Multi City - Multi State

Tender For supply of milk testing equipments at dcs c c--milk analyser with ews , adulteration test kit , ss milk can 40 litres , milk collection tray, made 1. 2mm thick ss 304 , milk sampler, made from 1. 2mm thick ss 304. minimum weight -90gm , funnel with strainer, made from 1. 2mm thick ss 304. minimum weight -1600gm , strainer sieve for funnel, material ss 304 , measure 100 ml, made from 1. 25mm thick ss 304. minimum weight 125gm , milk can plunger, made from ss 304. minimum weight-650gm , milk bucket, made from ss 200 series, seamless with bottom ring, 15 litre capacity. minimum weight -1600 gm , plastic hammer for can opening , milk butyrometer , lactometer , thermometer alcohol, 0 to 1000 c, , graduated pipettes 10 ml , milk pipette 7. 5 ml , test tubes 18 x 150 mm , glass beakers, 100 ml , glass beakers, 500 ml , porcelain dish, 3 inch , sprit lamp, stainless steel, 100 ml. , plastic sample bottles, 50 ml, with cap, made from food grade plastic, minimum weight-5. 5 gm , plastic tray for holding 24 nos. sample bottles securely, made from food grade plastic , tray for reagents, size 16x12 inches, made from food grade plastic , plastic tilt measure 1ml for alcohol with rubber cork and with plastic bottle of 250 ml. , plastic tilt measure 10 ml for acid with rubber cork and with plastic bottle of 500 ml , test tube stand for 12 tubes of size18x150mm, aluminum , nylon brush for cleaning pipettes, nylon length 4 inches, total length 12 inches , nylon brush for cleaning 50 ml milk sample bottles, , heater , acid 20 kg and alcohol 2 litres , furniture 1 set , calculator , stationery 1 set

CTN :42685704

28 Nov, 2025 NA

Multi City - Multi State

Tender For supply of furniture items c c--laboratory table with boxes , steel almirah , steel almirah small , computer table , computer and printer table , office table executive table , lecture stand , revolving chair small , three seat sofa , drawing stool laboratory table with boxes:laboratory table with boxes : table size: 2400 mm length x1200 mm width x 800 mm height (+/- 10 mm) frame: 48 mm square ms pipe and 1. 2 mm thickness. storage boxes: two storage boxes with doors and standard locks made up of 0. 8 mm crca sheet (+/- 0. 1 mm), top: top made of water proof ply board of thickness 25 mm pasted with 0. 8 mm thick sun mica, handle: plastic concealed handle of black colour. edges: edges cover with 2 mm thick hot glue pvc lipping pasted with cnc machine, colour: top mica chocolate brown, frame legs brown and storage boxes of cream colour. coating: powder coating range 50-55 microns. , steel almirah:size:- height-1981mm, width-916 mm, depth 486mm,construction: - the almirah should have welded type construction. the thickness of back panel should be 0. 8 mm, other components the thickness should be 0. 9mm and the shelf thickness should be 1. 2 mm doors & handles: - the almirah should have full height steel hinged door & should be provided with handle. locking: - the almirah should be provided with 3 way locking mechanism & shooting bolt arrangement. shelves & load bearing capacity: - the almirah should have height wise adjustable shelf mounting and uniformly distributed load capacity per each full shelf should be 80 kg and shelves should be 4 in number and should be fully adjustable. powder coating process: - all the metal parts shall be given antirust surface treatment & and shall be powder coated with epoxy polyester powder. it shall involves an 8 step treatment. final ) /bid number: gem/2025/b/6865848 * /dated: 10-11-2025 & & / bid document1 / 25finish shall consists of poxy polyester powder coating of approved color & shade with a dry film thickness of minimum 40 microns. the testing of paint shall be done for various physical & chemical properties as per is: 101. the material shall then be oven baked with a controlled temperature of 1800c to 2000c. manufacturer/ supplier must have iso- 9001, 14001, bifma & ohsas certifications. certificates should be attached. leveler:-it should have leveler with m10 screw type leveler with hexagonal plastic base. , steel almirah small :size:- height 1270 mm, width 765mm, depth 440 mm construction: - the almirah should have welded type construction. the thickness of back panel should be 0. 8 mm, other components the thickness should be 0. 9mm and the shelf thickness should be 1. 2 mm doors & handles: - the almirah should be provided with full height steel hinged door & should have handle. locking: the almirah should have 3 way locking mechanism with shooting bolt arrangement. shelves & load bearing capacity: - the almirah should have height wise adjustable shelf mounting and uniformly distributed load capacity per each full shelf should be 80 kg maximum and shelves should be 3 in number and should be fully adjustable shelves. powder coating process: - all the metal parts shall be given antirust surface treatment & and shall be powder coated with epoxy polyester powder. it shall involves an 8 step treatment. final finish shall consists of poxy polyester powder coating of approved color & shade with a dry film thickness of minimum 40 microns. the testing of paint shall be done for various physical & chemical properties as per is: 101. the material shall then be oven baked with a controlled temperature of 1800c to 2000c. manufacturer / supplier must have iso- 9001, 14001, bifma & ohsas certifications. certificates should be attached leveler:- it should have leveler with m10 screw type leveler with hex plastic base, computer table :computer table should have dimensions (mm) 900 x 750 d x 730 with +- 10mm tolerance on overall sizes.

CTN :42621440

17 Nov, 2025 NA

Shimla - Himachal Pradesh

Tender For tender for supply of soil investigation : :--mobalisation of necessary eqpt and man power to the project site and dismantling of the same of completion of field work from the site , provision of two bore hole of 150 mm dia in any type of soil upto max 10 mtr or upto refusal n 100 whichever meet first conducting standard penetration test as per is 2131 1981 reaffirmed 2016 test shall be made at not more than 1 50 mtr interval or on change of strata whichever is less , conducting following lab test on bore collected soil sample i direct triaxial shear test ii grain distribution curves & pattern in bore holes iii bulk density iv natural moisture content v dry density vi water table vii specific gravity viii atterberg limit ix hydrometer analysis x liquid & plastic limit xi swelling index , collection of lab test data calculation of gross and net safe bearing capacity and preparation of report on minimum 80 gsm a4 size white paper duly spiral bound in quintuplet duly vetted by any iit nit vetting shall not be in the personal capacity of the professor for foundation report shall recommend type of foundation and sizes at different depths below ngl including size gross and net safe bearing capacity , i photographic record of geo exploration as well as testing shall also part of the report ii recommendation as regards possibility of liquefaction of soil in case of saturated or partially saturated loose uncompacted sandy soil iii swelling index and swelling pressure in respect of black cotton soil and its depth layer if any iv depth of gr water table gwt in peak mansoon lowest and peak summer highest after correlation of result with seasonal of water table in the station v recommendation for filling under floors vi rl of ground level foundation level with ref to a bm should invariably be mentioned in the soil investigation report

Central Government/Public Sector

CTN :42589288

01 Dec, 2025 NA

Bhusawal - Maharashtra

Tender For corrigendum : supply of electromagnetic yoke (hand held type) a [electromagnetic yoke (hand held type) along with standard accessories for magnetic particle testing as per attached technical specification as annexure a.]

CTN :42669265

27 Nov, 2025 NA

Howrah - West Bengal

Tender For supply of magnetic particle testing consumable kit of 1 set consisting of 02(two) type material as follows: (i) one no. chlorine & sulphur free non corrosive, non toxic pre mixed black magnetic particle as per rdso/m&c/ndt/109/2007, rev-2, october2020 or latest(wet method). (ii) one no. snow white contrast coat non fluorescent oil base in 500 ml dispenser operating container as per bs-5044-1973 & bs- 6072-81. [ warranty period: 30 months after the date of delivery ]

Magnetic Particle Testing Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector