Latest marble chips Tenders | Government marble chips Tenders

State Government

CTN :40476182

31 May, 2025 NA

Chapara - Bihar

Tender For procurement of materials used in the schemes implemented under mnrega. - brick aggregate (single size):40 mm nominal size, stone aggregate(single size) : 40 mm nominal size, stone aggregate(single size) :20 mm nominal size, stone aggregate(single size): 10 mm nominal size brick bats, portland cement, white cement, block board construction flush door, with commercial ply on both faces, unslaked lime, satna lime, moorum, dry distemper, oil bound washable distemper/ acrylic, distemper, cement primer, distemper primer, pink primer (for wood), white cement based putty, black japan, enamel paint, roofing paint for iron sheets in red, colour, water proofing cement paint, plaster or paris, coarse sand (sone sand), fine sand, average rate of mild steel round bars, structural steel such as tees, angles,, channels and r.s. joists, flats up to 10 mm in thickness, steel glazed door, window/ ventilator,, all members viz, f7d, f4b, kll and, k12b etc., mild steel sheets for tanks, mild steel hooks, mild steel rivets, hard drawn steel wire fabric, galvanised steel bolts & nuts 6 mm dia, and 25 mm long round head with slots, galvanised steel j or l hooks 8 mm dia, galvanished steel bolts & nuts 10 mm, dia and 125 mm long round head with, slots, galva nished steel barbed wire, iron pintels including weldded pin, g.i lim pet washer 100, bitumen washer 100, 20 mm dia holding down bolts, mild st eel sheets with bolts and nuts to, rest on pintels, 18 mm t hick flamed finish granite stone, slab, g./. pipes 40 mm dia, r.cc pipes np2 class 300 mm dia, r.cc pipes np2 class 500 mm dia, r.cc pipes np2 class 600 mm dia, r.cc pipes np2 class 900 mm dia, r.cc collars np2 class 500 mm dia, r.cc collars np2 class 600 mm dia, r.cc coll~ np2 class 900 mm dia, rcc pipe 600 mm dia np- 3 spigot, rcc pipe 900 mm dia np - 3 spigot, vitreous china flat back wash basin, 630x450 mm, vitreous china india type w.e. pan size, 580mm, vitreous china orrisa type w.e. pan size, 580mm, common burnt clay f.p.s. (non, modular) bricks class designation 7.5, common burnt clay f.p.s. (non, modular) bricks class designation 5.00, over burnt (jhama) brick aggregate:, 120 mm to 40 mm size, over burnt (jhama) brick aggregate: 90, mm to 40 mm siize, red oxide zinc chromate primer, coloured inter locking c.c. paver block, sand zone v (jamuna)/local sand, f.p.s. (non modular) clay fly ash bricks, class designation 7.5, 400 g polythene sheet, white marble raj nagar plain 18 mm, thick upto on ~o sqm area, , upvc pipes (working pressure 4 kg /, cm2 ) single socketed pipe 110 mm dia, upvcbend 87.50, 110 mm bend, plain ce iling tiles (bwp type phenol, formaldehyde synthetic resin bonded), 600x600x12 mm), semi perforated ceiling tiles, (600x600x12 mm), binding wire, boulder 50 mm to 200 mm, coloured inter locking c.c. paver block, acrylic exterior paint, metal primer (u.g.), vitrified floor tile 50x50 cm, vitrified floor tile 60x60 cm, vitrifies floor tile 80x80 cm, vitrified floor tile looxl00 cm, border tiles 2c\ox75 mm size, interlocking c.c. paver block (60 mm, thick, m30), high polymer modified quickset tile, adhesive, interlocking c.c. paver block (80 mm, thick, m-30), 80 mm thick m 40 cc paver block, 80 mm thick m 40 cc paver block, (white color), ready mix paint for steel work, ready mixpaint for wood work, tmtc 500 8 mm, tmtc 500 10 mm, tmtc 500 12 mm, tmt fe 500 16 mm, tmt fe 500 20 mm, steel doors and windows ready made, steel door with necessary hinges lugs, and glazing clips excluding other clips, excluding other fittings and their fixing, mild steel wire road 6 mm, steel channel, galvanised stet l corrugated sheets 0.63, mm th'ck l", galvanised steel corrugated sheets 0.50, mm thick, galvanised steel corrugated sheets 0.40, mm thick, galvanised steel corrugated sheets 0.35, mm thick, galvanised steel corrugated sheets 0.80 mm thick

State Government

CTN :40486328

03 Jun, 2025 9.33 Lacs

Delhi - Delhi

Tender For name of work pay and use jsc (revenue) sub head - repair work of jsc ( flooring tile, wall tile, plaster, marble chips, sewer line component like manhole, cleaning of sewer line etc. ) at kamala nehru camp, kirtinagr, in motinagar ac-25,

CTN :40466703

11 Jun, 2025 15.00 Lacs

Barwaha - Madhya Pradesh

Tender For supply of flex printing rates including all taxes, transportation levis and other expenses. nothing but only gst would be paid additionally. - flex printing rates including all taxes, transportation levis and other expenses. nothing but only gst would be paid additionally., normal flex without frame(rate per sqft), star flex without frame(rate per sqft), normal flex with metal frame(rate per sqft), star flex with metal frame(rate per sqft), normal flex with wooden frame(rate per sqft), star flex with wooden frame(rate per sqft), vinyl sticker with sunboard sticker/cutout(rate per sqft), cut out/pasting work over frame(rate per sqft), glow shine board(rate per sqft), retroreflective type shine board over steel frame(rate per sqft), retroreflective type shine board over ms frame(rate per sqft), black star flex(rate per sqft), ms frame(rate per sqft), wooden frame(rate per sqft), pamphlet sze 8.5x11(rate per item), multicolour sticker(rate per item), videography(rate per minute), colour photograph(rate per photograph), shilalekh granite stone gravel writing(rate per sqft), shilalekh granite stone stricker writing(rate per sqft), a4 size pamphlet(rate per item), a5 size pamphlet(rate per item), legal size pamphlet(rate per sqft)

CTN :40466894

24 Jun, 2025 20.00 Lacs

Sagar - Madhya Pradesh

Tender For invited rate for cilvil material supply work at financial year 2025-2026 - flag stone (3 inch thickness), flag stone (4 inch thickness), metal red 40 mm, metal crushed 40 mm, metal crushed 20 mm, metal crushed 10 to 12 mm (including cost of spreading), granular sub-base material (including cost of spreading), metal crushed 6 mm (including cost of spreading), brick (open bhatta), brick (fly ash), over size metal (75-100 mm) including cost of spreading, boulder (including cost of spreading), moorum (including cost of spreading), hard copra (including cost of spreading), black cottan soil for plantation (including cost of spreading), stone dust (including cost of spreading), fine sand (narvda), sand (local), masonary stone( 8x8, 6x6 inch), mild steel / tar rod (6,8,10,12,16 mm), cement (isi mark), steel cross chanel frame work, w.c. sheet western (isi mark), w.c. sheet indian(isi mark), washbasin size 630x450 mm with apair of 15mm c.p brass pillar taps (isi mark), urinal 10 litr wit automatic flushing cistern (isi mark), pvc pipe 2 inch (isi mark), pvc pipe 3 inch (isi mark), pvc pipe 4 inch (isi mark), pvc pipe 6 inch (isi mark), gi pipe 2 inch, gi pipe 3 inch, gi pipe 4 inch, lime, distemper (with brand), paints (with brand), emulsion (with brand), paint for metallic item (with brand), paint for wooden item (with brand), primer (with brand), varnish (with brand), turpentine oil (with brand), melamine polish (with brand), granite different thickness, kota stone different thickness, ceramic tiles different thickness, white marble different thickness, glazed tiles different thickness, centering / shuttering, fancing barbed wire, gi chain line febric fencing with size 50x50 mm and 4mm dia wire, fancing pole (ht.-2.5m.), corrugated galvanised sheet with polymer coated, glass panes different thickness, anodied aluminium according to is:1868, powder coated aluminium, polyster powder coated aluminium, laminated particle board, ply board 8mm (waterproof standard brand ), ply board 10mm (waterproof standard brand ), ply board 12mm (waterproof standard brand ), ply board 16 mm (waterproof standard brand ), ply board 20 mm (waterproof standard brand ), mica sheet different thickness, m-30 grade 60mm paver block, stainless steel railing, galvanised fly proof wire gauze to windows with m.s flat, galvanised fly proof wire gauze to windows with m.s flat, angle iron post and strut, structural steel work including cutting ,hoisting ,fixing in diff. position, p.v.c sheet, labour rate (skilled), labour rate (unskilled)

CTN :40431119

02 Jun, 2025 5.21 Lacs

Multi City - Karnataka

Tender For supply of material for the construction of kitchen at balehosahalli govt higher primary school polanayakanahalli grama panchayathi cheluru taluk - suppling of jungle wood runners and planks to the specified location as per the requirement of engineer incharge of the work , suppling of ceramic tiles 30 x 30 cms to the specified location as per the requirement of engineer incharge of the work , suppling of casurina poles 100 - 150 mm to the specified location as per the requirement of engineer incharge of the work , suppling of burnt bricks class 35 (non modular) to the specified location as per the requirement of engineer incharge of the work , suppling of broken stone aggregate 40 mm size to the specified location as per the requirement of engineer incharge of the work , suppling of broken stone aggregate 20 mm size to the specified location as per the requirement of engineer incharge of the work , suppling of broken stone aggregate 12 mm to 10 mm size to the specified location as per the requirement of engineer incharge of the work , suppling of boulders to the specified location as per the requirement of engineer incharge of the work , suppling of bond stone 20 x 20 x 45 cm to the specified location as per the requirement of engineer incharge of the work , suppling of 5.50 mm thick plain glass to the specified location as per the requirement of engineer incharge of the work , suppling of m.s rods to the specified location as per the requirement of engineer incharge of the work , suppling of pvc beading to the specified location as per the requirement of engineer incharge of the work , suppling of binding wire to the specified location as per the requirement of engineer incharge of the work , suppling of display board / cib to the specified location as per the requirement of engineer incharge of the work , suppling of coarse sand (zone iii) to the specified location as per the requirement of engineer incharge of the work , suppling of dry distemper to the specified location as per the requirement of engineer incharge of the work , suppling of granite sink 23cm thick to the specified location as per the requirement of engineer incharge of the work , suppling of white vitreous china clay flat back wash basin size 630x450mm to the specified location as per the requirement of engineer incharge of the work , suppling of vitrified tiles 600x600 mm to the specified location as per the requirement of engineer incharge of the work , suppling of licenced plumber with tools to the specified location as per the requirement of engineer incharge of the work , suppling of ms flat to the specified location as per the requirement of engineer incharge of the work , suppling of stone chistler class ii to the specified location as per the requirement of engineer incharge of the work , suppling of mason class i (with tools) to the specified location as per the requirement of engineer incharge of the work , suppling of mason class ii (with tools) to the specified location as per the requirement of engineer incharge of the work , suppling of lime to the specified location as per the requirement of engineer incharge of the work , suppling of painter class i to the specified location as per the requirement of engineer incharge of the work , suppling of mixer (concrete) - 1 cum capacity to the specified location as per the requirement of engineer incharge of the work , suppling of mixer (concrete small used in culvert) to the specified location as per the requirement of engineer incharge of the work , suppling of welder grade i to the specified location as per the requirement of engineer incharge of the work , suppling of fitter class i to the specified location as per the requirement of engineer incharge of the work , suppling of fabricator to the specified location as per the requirement of engineer incharge of the work , suppling of tmt bars fe 500 to the specified location as per the requirement of engineer incharge of the work , suppling of size

CTN :40431172

02 Jun, 2025 5.69 Lacs

Multi City - Karnataka

Tender For supply of material for the construction of kitchen at achaganapalli govt higher primary school polanayakanahalli grama panchayathi cheluru taluk - suppling of burnt bricks class 35 (non modular) to the specified location as per the requirement of engineer incharge of the work a, suppling of broken stone aggregate 40 mm size to the specified location as per the requirement of engineer incharge of the work a, suppling of broken stone aggregate 20 mm size to the specified location as per the requirement of engineer incharge of the work a, suppling of broken stone aggregate 12 mm to 10 mm size to the specified location as per the requirement of engineer incharge of the work a, suppling of boulders to the specified location as per the requirement of engineer incharge of the work a, suppling of bond stone 20 x 20 x 45 cm to the specified location as per the requirement of engineer incharge of the work a, suppling of 5.50 mm thick plain glass to the specified location as per the requirement of engineer incharge of the work a, suppling of m.s rods to the specified location as per the requirement of engineer incharge of the work a, suppling of pvc beading to the specified location as per the requirement of engineer incharge of the work a, suppling of binding wire to the specified location as per the requirement of engineer incharge of the work a, suppling of plasticizer / super plasticizer to the specified location as per the requirement of engineer incharge of the work a, suppling of display board / cib to the specified location as per the requirement of engineer incharge of the work a, suppling of coarse sand (zone iii) to the specified location as per the requirement of engineer incharge of the work a, suppling of water proofing cement paint to the specified location as per the requirement of engineer incharge of the work a, suppling of dry distemper to the specified location as per the requirement of engineer incharge of the work a, suppling of portland cement to the specified location as per the requirement of engineer incharge of the work a, suppling of granite sink 23cm thick to the specified location as per the requirement of engineer incharge of the work a, suppling of white vitreous china clay flat back wash basin size 630x450mm to the specified location as per the requirement of engineer incharge of the work a, suppling of vitrified tiles 600x600 mm to the specified location as per the requirement of engineer incharge of the work a, suppling of licenced plumber with tools to the specified location as per the requirement of engineer incharge of the work a, suppling of ms flat to the specified location as per the requirement of engineer incharge of the work a, suppling of stone chistler class ii to the specified location as per the requirement of engineer incharge of the work a, suppling of mason class i (with tools) to the specified location as per the requirement of engineer incharge of the work a, suppling of mason class ii (with tools) to the specified location as per the requirement of engineer incharge of the work a, suppling of lime to the specified location as per the requirement of engineer incharge of the work a, suppling of painter class i to the specified location as per the requirement of engineer incharge of the work a, suppling of mixer (concrete) - 1 cum capacity to the specified location as per the requirement of engineer incharge of the work a, suppling of mixer (concrete small used in culvert) to the specified location as per the requirement of engineer incharge of the work a , suppling of welder grade i to the specified location as per the requirement of engineer incharge of the work a, suppling of fitter class i to the specified location as per the requirement of engineer incharge of the work a, suppling of fabricator to the specified location as per the requirement of engineer incharge of the work a, suppling of tmt bars fe 500 to the specified location as per the requirement of engineer incharge of the w

CTN :39038232

06 Jun, 2025 13.18 Crore

Gandhinagar - Gujarat

Tender For corrigendum : supply of goods, tools & equipmentforan international standard itotin mechanic motor vehicle (mmv) tradeat iti tarsali, gujarat, india (package 3: mmv trade) - alternator assembly used for lmv working condition demonstration kit , starter motor assembly used for lmv working condition demonstration kit , electronic engine control module , fuel pump for mpfi working condition demonstration kit , inline fuel injection pump and rotor type fuel injection pump , demonstration board of 2wheeler ignition system. , demonstration board of electronic ignition system. , working condition of petrol mpfi engine assembly with fault simulation board , mpfi petrol engine with swiveling stand along with special tools for dismantling and assembling , demonstration board of mpfi system , ultrasonic injection cleaning equipment , working model of power windows , petrol engine motorcycle/scooter along with special tools and accessories , four stroke multi cylinder diesel engine in working condition , four stroke four cylinder crdi diesel engine in working condition , functional/experiment model of different type of sensors. , auto electrical test bench , cut section model of mock layout of a motor car -electrical system - working model , cut section working model of single plate clutch assembly. , cut section working model of diaphragm clutch assembly. , cut section working model of centrifugal clutch assembly. , front axle ( rezeppa joint) with stand for dismantling and assembly , rear axle with stand for dismantling and assembly , cut section model of synchronous gear box working , cut section model of sliding mesh gearbox working , cut section model of constant mesh gearbox working , full floating axle and semi- floating axle assembly , cut section working model of automatic transmission gear box , steering assembly - , 1. rack& pinion, , 2. worm& roller , 3. recirculating ball , 4. power steering , wheel alignment set up instrument-computerized , brake testing equipment (to test efficiency of vehicle where motion after braking is plotted) , motor vehicle in running condition (diesel heavy) with hydraulic power steering , light motor vehicle diesel crdi with electronic power steering and car a/c , engine dynamometer , four stroke multi cylinder engine mpfi petrol with cng kit set up in running condition , four cylinder four stroke diesel engine test rig with rope brake dynamometer , exhaust gas analyzer - diesel , training setup for adas systems , 4-wheel alignment set & hoist with advanced driver assistance systems (adas) complete frame targets , steel toolbox with lock and key (folding type) , punch letter , outside micrometer (0 25) , outside micrometer (25 50) , outside micrometer (50-75) , outside micrometer (75-100) , inside micrometer (25-50) , depth micrometer (0-25) , thread micrometer , adjustable micrometer sprit level to measure flatness, indication and taper with prismatic measuring base , vernier caliper , digital vernier caliper , vernier depth gauge , vernier bevel protractor, least count 5minutes , telescope gauge , dial test indicator plunger type (complete with clamping devices and stand) , universal surface gauge , cylinder bore gauge , compression testing gauge suitable for petrol engine. , vacuum gauge , granite surface plate , work bench , spanners socket with speed handle, t-bar, ratchet and universal , magneto spanner set , cylinder ridge cutter , vice grip pliers , torque wrenches , pneumatic tools set , car jet washer , pipe flaring tool , pipe cutting tool , universal puller for removing pulleys, bearings , stud extractor set of 3 , stud remover with socket handle , paraffin pressure gun , hand reamers adjustable , straight edge gauge , straight edge gauge , ladle , electric soldering iron , wire gauge (metric) , digital multi meter, 3 % digit (min), diode test mode and continuity mode, , growler , hydrometer , battery analyzer with printer , carburetor - solex, mikuni for dismantling a

CTN :40412724

09 Jun, 2025 38.24 Lacs

Meerut - Uttar Pradesh

Tender For rate contract of feed ingredients for feed unit prtc svpuat meerut - name of the feed ingredients for feed unit (details as per given in tender document page no 10), maize, soyameal doc 45 percent, cotton seed delinted, mustard cake deoiled, gnc groundnut cake, ddgs dried distillers grain solubles, gut health enhancer ruminants, wheat bran, cotton seed cake, dcp dicalcium phosphate, calcite powder, toxibind ruminants, salt, soda bicarb sodium bicarbonate, trace mineral mixture ruminants, rice polish, vit premix ad3 ruminants, dorb deoiled rice bran, fish meal, l lysine, dl methionine, choline chloride poultry, vitamin c, trace mineral premix poultry, vitamin premix poultry, vitamin b-complex poultry, vitamin e plus se, toxin binder poultry, coccidiostat mudradian 1percent poultry, enzyme poultry fermentation extract, liver tonic poultry, antioxidant poultry, oyster shell, marble chips

Central Government/Public Sector

CTN :40415773

27 May, 2025 14.43 Lacs

Raipur - Chhattisgarh

Tender For supply and installation of brass 3d letter with ntpc logo on mild steelhoarding structure and over granite for display board at ntpc sipat.

CTN :40426073

23 Jun, 2025 30.00 Lacs

Birsinghpur - Madhya Pradesh

Tender For supply of lok nirman samagri for f.y. 2025-26 - stone 6x6x6 inch with labour & material, stone 6x6x6, brick local, brick chimney, plaster work 12mm with labour & material, plaster work 15mm with labour & material, soak pit in plastic tank 250 liter with labour & material complete, sand(khajuraho), sand(son), brickwork local with labour & material, brickwork chimney with labour & material, brickwork flyash with labour & material, crusher dust providing & laying, coarse aggrigate, binding wire, iron angle, centering providing & fixing, cement ppc, cement opc, lime hydrated, lime powder, distemper work 2 coat with labour & material, lime whitewash work 2 coat with labour & material, putty work with labour & material, primer work with labour & material, muroom providing & laying, gsb providing & laying, crm providing & laying, dlc providing & laying, hard soil providing & laying, loose soil providing & laying, black cotton soil, backhoe loader rent, concrete mixture, hume pipe 300mm providing &laying, hume pipe 400mm providing &laying, hume pipe 500mm providing &laying, hume pipe 600mm providing &laying, hume pipe 900mm providing &laying, cement brick, cement brick providing, cement pipe 3 inch, cement pipe 4 inch, plastic pipe 3 inch, plastic pipe 4 inch, tmt steel bar, white cement, ss work in 304 grade steel providing & fixing, profile sheet 12x3 sqft, ac sheet 12x4 sqft, fiber sheet 12x4 sqft, painting labour work only, gi sheet 12x4 sqft, aluminitum section work 18 gauge providing & fixing, aluminitum section work 16 gauge providing & fixing, fencing wire, welding work, tyre/tube puncher repairing, pcc m15 concrete work providing & laying, pcc m20 concrete work providing & laying, pcc m10 concrete work providing & laying, flag stone 2 inch thick, flag stone 3 inch thick, sand stone 40mm with labour material, kota stone 25 mm with labour & material, glass molded 12mm, iron girder all size, wall art painting with labour & material, wall at painting only labour work, pre cast cement boundry wall 6 feet height, star flex printing with frame, normal flex printing with frame, star flex printing without frame, normal flex printing without frame, led digital screen in rent 12 x 8 feet size with operator, plastic flexibal sheet, sepration membrane 125 micron thickness, acp sheet work with labour & material, ss mesh, granite work (south) providing & laying, granite work (rajasthan) providing & laying, granite molding work, double charged tiles providing & laying, ceremic tiles providng & laying, wall tiles providing & laying, led wall panel p7, retro 3m board 3mm, sun pack board, glow shine board 100 mm thickness with backlit complete, redium printing complete, iron pole, it flooring providing & laying, diamond carpet grass providing & laying, planted grass providing & laying, jcb road roller rent, plastic planter 14 inch dia, cement planter 14 inch dia, planter bottom tray 12inch dia, signage board selfie point (i love kotar) complete with base 12 x 4 sqft, twin bin 80 l, double pole with name plate open type dustbin, cr iron material with stand ,cover and fitting complete, twin bin 70 l, double pole with name plate open type dustbin,16x16x24 inch stainless steel material,19.200 kg (mss745) (steel) with stand ,cover and fitting complete, twin bin 100 l, double polw with name plate open type dustbin,plastic material with stand ,cover and fitting complete company make neelkamal,astro,cello

Marble Chips Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government/Public Sector