Get complete information related to latest Mattresses Scrap Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Mattresses Scrap Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Mattresses Scrap Tenders.
Tender For supply and installation one coach set of seats and berths with hardware f or lws pp coach to drawing 754-6-1-001, col-1, alt-b (except item 10,11,12,13,37 and relate d fixing hardware in col-i).cushioning material shall be of pu foam conforming to rdso specification rdso/2007/cg-04, rev.01 or latest. note: firm has the option for offering se ats and berths cushion with lower density of 65 plus or minus 5 kg/m3 conforming to sp ec.rdso/2007/cg-04, rev-01 or latest also. requirements and colour of upholstery shall be as per letter no.md/d/ss/103b dated-16.07.2024 and letter no. md/ss/lhb/ac/103/f dated -15.07.2024 respectively. colour of the aluminium tub and aluminium moulding shall be a s per letter no.md/ss/lhb/ac/103/f dated-12.09.2024 upholstery sample to be submitted to icf design for approval of colour. installation required as per arrangement drawing. a ll necessary hardwares required for installation is under scope of the supplier. please visit icf vendor portal for downloading drawing https://vp.icf.gov.in/vendtendordetnew.php using key : 0725kfpmlol2557 [ warranty period: 120 months after the date of delivery ]
Tender For supply and installation of one coach set of seats and berth complete for l wscwac/eog coaches to drg. no. lwscwac/eog-6-1-001,alt- j, col-i. (except item-13) with up holstery colour alnac-03. cushioning material shall be pu foam as per rdso specificatio n no.rdso/2007/cg-04, rev-01 or latest and upholstery to rdso spec.rdso/2008/cg-07 rev- 00, amd-01 to 05. for thickness of cushion refer drawing 593-6-1-042,alt-e. installation r equired as per arrangement drawing. all necessary hardwares required for installatio n is under scope of the supplier. note : firm has the option for offering seats and berth s cushion with lower density of 65 plus or minus 5 kg/m3 conforming to spec.rdso/2007/c g-04, rev-01 or latest also. please visit icf vendor portal for downloading drawing https://vp.icf.go v.in/vendtendordetnew.php using key: 0725h5dxahs2428 [ warranty period: 120 months after the date of delivery ]
Tender For supply of set of folding seat and back rest in guards room to drg no. lwlrrm- 6-4-014, alt a, item no. 1 & 2. cushioning material shall pu foam as per rdso specification no.rdso/2007/cg04,rev-01 or latest. note: firm has the option for offering seats and berths cushion with lower density conforming to spec.rdso/2007/cg-04, rev-01
Tender For supply and installation of coach set of seats and berths for lws/bw2 coac h to drawing lg61006, alt-d,col-01,except item 37 and lower luggage rake, part of item 1 4. (item no. 1 of drg. no. mi006651 ie cc61426) cushioning material shall be pu foam as per rdso specification no.rdso/2007/cg04, rev-01 or latest and upholstery to rdso spec.rds o/2008/cg-07 , rev-01 or latest. installation required as per arrangement drawing. all n ecessary hardwares required for installation is under scope of the supplier. note: firm has the option for offering seats and berths cushion with lower density of 65 plus or minus 5 kg/m3 conforming to spec.rdso/2007/cg-04, rev-01 or latest also. please visit icf ve ndor portal for downloading drawing https://vp.icf.gov.in/vendtendordetnew.php using key: 0725fuwo f7e2372 [ warranty period: 120 months after the date of delivery ]
Tender For supply of specified and as directed. , m and l sand cushioning dry in trenches for protection of ug cables below above and around the ug cable , m and l for fly ash bricks locally available laid dry width wise across the line of cable in trenches , supplying and fixing galvanised mild steel pipe tubing light grade complete with all fittings of 80 mm bore dia , supplying and fixing galvanised mild steel pipe tubing light grade complete with all fittings of 50 mm bore dia , supplying and fixing galvanised mild steel pipe tubing light grade complete with all fittings of 100 mm bore dia , m and l for boring of horizontal hole under road pavement hardstanding suitable for passing through up to 80 mm bore , m and l for straight through joint heat shrinkable complete suitable for lt 1100 volt aluminium conductor cable of size3.5 4 x 1016 sqmm , m and l for straight through joint heat shrinkable complete suitable for lt 1100 volt aluminium conductor cable of size3.5 4 x 2550 sqmm , m and l for straight through joint heat shrinkable complete suitable for lt 1100 volt aluminium conductor cable of size3.5 x 70150 sqmm , supplying and fixing high density polyethylene pipes hdpe of pressure rating 6 kgf cm2 complete with all fittings of 25 mm bore dia , supplying and fixing high density polyethylene pipes hdpe of pressure rating 6 kgf cm2 , supplying and fixing high density polyethylene pipes hdpe of pressure rating 6 kgf cm2 complete with all fittings of 50 mm bore dia , supplying and fixing high density polyethylene pipes hdpe of pressure rating 6 kgf cm2 complete with all fittings of 100 mm bore dia , material and labour for earthing complete with galvanised steel earth plate electrode 600x600x6 mm , dismantling existing lt panels of any type any size carefully for reuse including necessary excavation demolition of concrete disconnecting of earthing cable , labour only for disconnecting isolating and taking out burned unserviceable lugs switchgear metering devices wiring bus bar etc , supply only the followings to be incorporated against item no 30.00 and 31.00 only 06 sqmm to 16 sqmm , 25 sqmm to 50 sqmm , 70 sqmm to 95 sqmm , 120 sqmm to 240 sqmm , epoxy type insulator upto 1100volt for lt panel bus bar including nut bolts etc. , single core stranded copper conductor frls of size 16 sqmm including copper lugs at both ends , single core stranded copper conductor frls of size 10 sqmm including copper lugs at both ends , aluminium busbars electrolytic grade of as per site required amps and ka rating bus bars with ryb and black colour coding including drilling cutting , s and f of framed work as in doors or gates of angle or other section with gusset plates rails braces etc. complete drilled for fixing of steel sheeting or other covering. doors etc. , m and l for cross arms bracings supports clamps and back plates fabricated from structural steel sections includings nuts bolts washers welding , m and l for cement concrete 136 type c2 using 40mm graded crushed stone aggregate as in pole foundation filling and mass concrete complete all as specified , m and l for cement concrete 124 type b1 using 20mm graded crushed stone aggregate as in coping of pole including weathering slightly rounded , m l brick work with flyash bricks old size straight or curved on plan to any radius exc 6m mean radius build , m and l for 15mm thick in cm 14 rendering on brick or concrete surfaces finished fair and even on wall complete all as specified and directed. , m and l for hardcore of gauge n exc. 63 mm deposited spread and levelled in layers n exc. 15 cm thick watered and rammed to a true surface as specified and directed. , m and bid details/ 2 / 38 l ss pasivated screw bolts machine made with hexagonal head at one end and screwed the other ends each screwed end to be fitted with washers and one hexagonal nut diameter , m and l for preparation of existing surface of lt panel by srapping down peeled off old paint cleaning etc and applying two coat of siemens
Tender For supply of disconnecting and taking out defective under ground lt cable from trenches pole pipe floor wall etc , supply laying testing and connecting xlpe sheathed cable heavy duty with stranded aluminium conductor 1100 volt grade of size 4.0 core 10 sqmm. , all as per boq item no 2.00 here in before but of size 3.5 core 70 sqmm. complete all as specified , all as per boq item no 2.00 here in before but of size 3.5 core 120 sqmm. complete all as specified , excavating in trenches n.exc 1.5 m wide and n.exc 1.5 m depth for foundation etc or for shafts wells cesspits manhole pier hole taking out and laying of cable etc , returning filling in including spreading levelling watering and well ramming in layers not exc. 250mm in soft loose soil complete all as specified and as directed. , removing excavated materials soils not exc. 50.00 mtr and depositing where directed at a level not exc. 1.50 mtr above the starting point in soil complete all as specified and as directed. , m and l sand cushioning dry in trenches for protec tion of ug cables below above and around the ug cable , m and l for fly ash bricks locally available laid dry width wise across the line of cable in trenches for protection of ug cable , supplying and fixing galvanised mild steel pipe tubing light grade complete with all fittings of 80 mm bore dia laid in trenches under roads fixed to poles , supplying and fixing galvanised mild steel pipe tubing light grade complete with all fittings of 50 mm bore dia laid in trenches under roads fixed to poles , supplying and fixing galvanised mild steel pipe tubing light grade complete with all fittings of 100 mm bore dia laid in trenches under roads fixed to poles , m and l for boring of horizontal hole under road pavement hardstanding suitable for passing through up to 80 mm bore complete all as specified. , s and fix hdpe dwc double wall corrugated of dia 25 mm incl disconenction and connection to cable near oh for pipe fixing incl joints complete , s and fix hdpe dwc double wall corrugated of dia 40 mm incl disconenction and connection to cable near oh for pipe fixing incl joints complete , s and fix hdpe dwc double wall corrugated of dia 50 mm incl disconenction and connection to cable near oh for pipe fixing incl joints complete , material and labour for earthing complete with galvanised steel earth plate electrode 600x600x6 mm mm buried directly in ground earth pit not less than 2.25m below ground level , supply and fix metal cable route indicator of height 750 mm ms flat of 40 mm x 4 mm with circular 100 mm diameter ms sheet of minimun thickness 3mm , taking down dismantling of unserviceable lt panels complete all as specified and directed by engineer in charge. , supply designing install testing commission 3 phase and neutral 415 volts outdoor type cpri type tested having certification , all as per boq item no 57.00 here in before but of size 1.00m x 0.45m x 1.00m with the following incoming and outgoing , wrecking crow bar or claw bar as per is 706 (q3)
Tender For supply of one coach set of pu foam cushion material for laccn coaches to drg. (1) transverse seat cushion, le61207, alt-g, anx-1, item-6 = 18 nos.(2) single seat (lh) cushion, le61209, alt-e, an x-1, item-6 = 9 nos. (3) single seat (rh) cushion, le61225, alt-e, anx-1, item-6 = 9 nos. (4) cushion f or single seat br (berth side) le61210, alt-f, anx-2, item-3 = 18 nos. (5) cushion for single seat br ( back rest side) le61210, alt-f, anx-2, item-4=18 nos. (6) cushion for transverse middle berth, le612 16, alt-f, anx-1, item-6 = 18 nos. (7) cushion for transverse upper berth, le61120, alt-h, anx-3, item- 4 = 18 nos. (8) cushion for long upper berth, le61118, alt-f, anx-2, item-4 = 9 nos. (9) cushion for c onductor berth, le61249, alt-d, item-5 = 1 no. cushioning material shall be of pu foam conforming t o rdso specification rdso/2007/cg-04 rev.01 . [ warranty period: 120 months after the date of de livery ]
Tender For supply and installation of one coach set of seats and berth for lwaccn coache s to drg.no. 645-6-1-001, alt-a, except item-36. follow cushioning material pu foam to mmdts 1 9020 rev 05 or latest and upholstery to rdso spec.rdso/2008/cg07 rev-1 of sept-2023. installation required as per arrangement drawing.all necessary hardwares required for in stallation is under,scope of the supplier. fire barrier cloth to mmdts-19021 is not required [ warranty period: 120 months after the date of delivery ]
Tender For "supply of one complete set of seats and berths for lhb confirming to drg.no.l wscwac/eog-6-1-001, alt-j, col-i. (except item 13). cushioning material shall be of pu foam as p er mcf specification no. mmdts 19020 rev 05 with fire barrier cloth to mcf specification mmdt s 19021 rev-4 and upholstery to rdso spec rdso/2008/cg-07 rev-01. upholstery color shade to alnac-0 3, material and specifications are as per above specifications. note: material should be supplied in staggered quantity i.e. first lot 6 complete coach sets within 15 days, and remaining 6 complete coach sets after 3 mon ths of supply of first lot". [ warranty period: 120 months after the date of delivery ]