Latest measurement spares Tenders | Government measurement spares Tenders

CTN :37998624

20 Nov, 2024 NA

Panaji - Goa

Tender For corrigendum : supply installation and commissioning of lab. equipment for mechanical engg dept - separating & throttling calorimeter with mini boilerfeatures: determining the vapour content usingo a separating calorimeter with cyclone water separatoro a throttling calorimeter with vapour depressurization using an h-s diagramspecifications:supplied vapour temperature: 240 c pressure: 10barsafety valve: 10barmeasuring ranges temperature: 0 400 c pressure (inlet): 0 16bar pressure (outlet): -150 100mbar230v, 50hz, 1 phase230v, 60hz, 1 phase120v, 60hz, 1 phasedimensions and weight: l x w x h: 800x 800 x 1700 mm weight (approx.): 110 kg, steam turbine power plant setupfeatures steam power plant and its components start-up, operation and shut down of a steam power plant closed steam-water circuit with feed water treatment among others, determining:o boiler efficiencyo mechanical/thermal efficiency of the turbineo condenser efficiencyo specific fuel consumption of the plantspecificationsteam generator steam output: 200kg/h at 11bar fuel consumption: 12l/h heat-up time: 8min pressure: 13barsuper heater power: 7kwsingle-stage axial turbine with curtis wheel and hydraulic speed regulator power: max. 1,5kw at 3000min-1water-cooled condenser cooling capacity: 98kw transfer surface: 2,5m2measuring ranges temperature: 9x 0 400 c, 2x 0 100 c flow rate: 0 167l/min (cooling water) pressure: 3x 0 16bar, 1x 1bar torque: 0 20nm speed: 0 4000min-1400v, 50hz, 3 phases400v, 60hz, 3 phases, 230v, 60hz, 3 phasesdimensions and weight l x w x h: 3500x 2500 x 2250 mmweight (approx.): 2250 kg, rotary air compressor test benchfeatures: to study all components/accessories used in rotary air compressor. to study & determine isentropic work, actual work volumetric efficiency, isentropic efficiency & free air delivery at different delivery pressure. to plot volumetric efficiency/isentropic efficiency against delivery pressure & comment on the nature of the plot.observations can be taken by air compressed in storage& free condition. instrumentation: sensors with digital displays software for data acquisition via usbspecifications: vane compressor rotary compressor, driven by 3 hp motor. calibrated orifice meter with water manometer to measure air intake. energy meter to measure input of the meter. pressure gauge to measure discharge pressure. control valve at delivery side. stop clock.dimensions and weight: l x w x h: 1500x 1500 x 1250 mmweight (approx.): 320kg, marcet boiler test apparatusfeatures: recording the vapour pressure curve of water presentation of the relationship between pressure and temperature in a closed system temperature and pressure measurementspecification:bourdon tube pressure gauge: -1 24bartemperature limiter: 200 csafety valve: 20barheater: 2kwboiler, stainless steel: 2lmeasuring ranges temperature: 0 200 c pressure: 0 20bar230v, 50hz, 1 phase230v, 60hz, 1 phase120v, 60hz, 1 phasedimensions and weight: l x w x h: 800x 600 x 600 mmweight (approx.): 45 kg, rope brake dynamometerpower 0.5 kwvoltage 220 vphase single phasefrequency 50 hzmaterial stainless steelwheel size 45 cm, cam analysis apparatus capacity 7. 5 hpphase 3 phasespeed 1500 rpmfrequency 50 hzmaterial stainless steel 304color blue, slip gauge set steel sets with high wear resistance.47 & nabl calibrationslip gauge set steel sets with high wear resistance. high level accuracy and reliability of measuring results are guaranteed by precise calibration. provided with nabl traceability if required. sets of m46, m87, m112. metric/imperial., bevel protectorblade length 150mm w/60, 40degree edges, required stand and type, sine bar range 200mm for checking concentricity, run out of sharpness taken & degree checking, digital outside micrometerspecification range 0-25mm, digital vernier caliperspecification range 0-150mm/6 , radius gaugeradius gauge 1-7mm, surface plate granite a grade 24 x 36 inch in a class granite, mechanical comparator analog type with dia

Central Government/Public Sector

CTN :38164467

18 Nov, 2024 NA

Tiruchirappalli - Tamil Nadu

Tender For quotation for piezoelectric constant measure system

Central Government/Public Sector

CTN :38108657

03 Dec, 2024 NA

Jalna - Maharashtra

Tender For supply of ffr/ifr/dfr wire with specifications 1. asses the arterial pressure through cath lab tra nsducer system. 2. asses distal pressure through the device and should have facility of pressure meas urement though the pull back 2. measure the pressure of range -30 to 300 mmhg 3. frequency respon se of 0-25 hz 4. display both real time and mean pressure ]

Central Government/Public Sector

CTN :38108693

04 Dec, 2024 NA

Multi City - Multi State

Tender For supply, inspection and testing, installation and commissioning of high-performance laser sca nner system as per attached technical document no. rm2/uic/aic/2024/e-123293 dated 12.06.2024, rev- 1 (dated 07.10.2024) and special conditions of tender rm2/uic/aic/2024/spl_cond/e-123293dated12.0 6.2024, rev2 (dated 07.10.2024) to accurately measure wheel lift during first stage assessment trial (met hod-1), speed up to 10 kmph in accordance with en-14363 methodology copy attached. ]

corporations/Associations/Others

CTN :38092148

03 Dec, 2024 NA

Kolkata - West Bengal

Tender For revamping the coagulant dosing and monitoring measure towards the clariflocculator system no-4,5 and 6 under 60mgd plant, igwtp

State Government

CTN :38039736

25 Oct, 2024 20.00 Lacs

Multi City - Bihar

Tender For supply of machines and equipment's for electronics engineering lab - construct a half wave rectifier and obtain regulation characteristics without filters and with filters. compare the results, objective: to study efficiency & ripple factor of half wave rectifier on application of load & filters. , digital multimeter:", "construct a full wave rectifier and obtain regulation characteristics without filters and with filters. compare the results , objective: to study efficiency & ripple factor of full wave & bridge rectifier on application of load & filters. , analog multimeter:, construct a bridge rectifier and obtain regulation characteristics without filters and with filters , 30v 5a smps based dc regulated power supply, obtain the characteristics of diac and triac, digital function generator, construct the circuit and plot the vi characteristics of the pn junction diode, find the cut in voltage , objective: to study forward & reverse characteristics of pn junction diode. , d.s.o 40 mhz", 1n4007 diode , fixed resistor, capacitor, 1n4735 zener diode, breadboard jumper wires ribbon cables kit, multi-colored , electronic transformers, electronic spices pack of 2 10k ohm potentiometer, single variable resistor (round), bjt, fet, diac, triac, analog communication training system, 100 mhz dual channel digital storage oscilloscope, measure unknown inductance using following bridges, 1. anderson bridge kit with digital null detector. , 2. maxwell bridge kit with digital null detector., measure low resistance by kelvin's double bridge. , kelvin's double bridge kit with digital null detector.", dc slide wire potentiometer kit, crompton potentiometer kit, measurement of strain/force with the help of strain gauge load cell , strain gauge kit.", q-meter kit., draw the characteristics of the following temperature transducers , (a) rtd(pt-100), (b) thermistor, measurement of displacement with the help of lvdt, to verify the truth tables for all logic gates not or and nand nor xor xnor using cmos logic gates and ttl logic gates. , digital ttl logic gate kit. , digital cmos logic gate kit., implement and realize boolean expressions with logic gates. , basic logic gate kit., implement half adder, full adder, half subtractor, full subtractor using ics. , digital half and full adder/ subtractor , kit using ics.", "design and development of multiplexer and de-multiplexer using multiplexer ic. , multiplexer and de-multiplexer kit using ic., verification of the function of sr, d, jk and t flip flops. , digital rs, d, jk and t flip flops trainer kit., design controlled shift registers kit., construct a single digit decade counter (0-9) with 7 segment display. , 8051 microcontroller trainer kit., stepper motor interface card, dc motor interface card, basic digital communication training system, advanced digital communication training system, 100 mhz dual channel digital storage oscilloscope., a) verify the open loop transfer characteristics of op-amp using ic-741. also determine gain of b) inverting, c) non-inverting and d) buffer amplifier using ic-741 on bread board and trainer kit. , ic-741 op-amp trainer kit and bread board, design a monostable multivibrator using ic-555 timer and calculate the duty cycle and pulse width of the generated waveform. , monostable multivibrator using ic-555 timer, gl-12 840 points solderless breadboard, soldering iron kit, hot air gun, antenna measurement system, motorised transmission line trainer

Measurement Spares Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

State Government