Tender For operation and maintenance of 3 mld stp and mps based on mbbr. technology with nitrification, denitrification units, mechanical course bar and fine bar screen complete in all respect at hassanpur town distt. palwal. maintenance of civil works electrical and mechanical
Tender For providing and fixing electrical equipments accessories mechanical spare parts and electrical installation to pump house at paddal and tarna - providing and fixing new ball bearing 7312 skf make (begap) complete in all respect as per the direction and to the entire satisfaction of the engineer-in-charge in all leads and lifts., providing and fixing new ball bearing nu 412 skf make complete in all respect as per the direction and to the entire satisfaction of the engineer-in-charge in all leads and lifts., providing and fixing new ball bearing 6314 skf make complete in all respect as per the direction and to the entire satisfaction of the engineer-in-charge in all leads and lifts., providing and supplying gland dori 16 mm in all leads and lifts., providing and supplying gland dori 14 mm in all leads and lifts., providing and supplying gland dori 10 mm in all leads and lifts., repair / overhauling of 5.00 hp monoblock pump set including cost of change of ball bearing no. 6307 & 6308 in 2 nos. pump sets and dismentling, assembling, testing and carriage of pump at site of work including labour charges complete in all respect as per the satisfaction of engineer-in-charge in all leads and lifts., repair / overhauling of 200.00 hp centrifugal pump set including cost of change of sleeves, cleaning and regreasing of all bearing and dismentling, assembling, testing and carriage of pump at site of work including labour charges complete in all respect as per the satisfaction of engineer-in-charge in all leads and lifts., providing and supplying rechargeable led torch 3 watt (wipro) make complete in all respects and to the entire satisfaction of the engineer-in-charge., providing and fixing three core submersible flat cable 10.00 sq. mm for submersible pump set of plaza / finolec make in all leads and lifts., wiring for light point/ fan point / exhaust fan /call bell point with 1.5 sq. mm. pvc insulated heat resistant flame retardant (hrfr) and low smoke single core (flexible) copper conductor cable in surface/recessed pvc conduit and earthing the light point with 1.5 sq.mm. hrfrls/pvc insulated single core copper conductor cable as required., supplying and fixing metal box of 180mmx100mmx60mm deep (nominal size) on surface/recess with suitable size phenolic laminated sheet cover in the front including providing and fixing 5 pin 5/6 amps socket outlet and 5/6 amps, piano type switch, connections, painting etc. as required., supplying and fixing metal box of 180mmx100mmx60mm deep (nominal size) on surface/recess with suitable size phenolic laminated sheet cover in the front including providing and fixing 6 pin 15/16 amps socket outlet and 15/16 amps, piano type switch, connections, painting etc. as required., wiring for circuit/sub-main with following size pvc insulated heat resistant flame retardant (hrfr) and low smoke single core (flexible) copper conductor cable in surface/recessed pvc conduit along with 1 no. hrfrls/pvc insulated single core copper conductor cable of same size for earthing as required.2x1.5 sq. mm., 2x10.0 sq. mm., supplying and erection of 6 amps. to 32 amps. rating, 10 ka breaking capacity, 240 volts, c curves, miniature circuit breaker of following poles in the existing mcb db complete with connections etc. as required:- single pole. cat-a., supplying and erection of 40/50/63 amps rating. 10 ka breaking capacity, 240 volts, c curves, miniature circuit breaker of following poles in the existing mcb db complete with connections etc. as required:- double pole. cat-a., supplying and fixing of following way, single pole and neutral sheet steel mcb distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:-single door-6 way, supplying and fixing bakelite batten/angle holder including connect
Tender For corrigendum : tender for supply of astm e-415/21 standard test method for analysis of carbon and low-alloy steel. , astm e-23-24 standard test method for notch bar impact testing of metallic materials. , astm e8/e8m-24 standard test method for tension testing of metallic materials. , astm e-21-20 standard test method for elevated temperature tension tests of metallic materials. , astm a-370/24 standard test methods & definitions for mechanical testing of steel products. , is-1608:part 1/2022 tensile testing of metals at room temperature is-1608. part 3/2018. tensile testing of metals at low temperature. , is-1757 part 1:2020 charpy pendulum impact test method astm e1601-12 standard practice for conducting an interlaboratory study evaluate the performance of an analytical method.
Tender For repair and overhauling service - ground equipment;ground equipment; no; buyer premises-scope of work for servicing of ground equipment- regular servicing and preventing maintenance of ground equipment is essential to ensure the safety, efficiency, and reliablility of ground operations. gsse plays a critical role in supporting aircraft turnaround, maintenance, and logistics function. over time, continous use of equipment such as ladders, hydraulic rigs, trolleys, towing arms, and refilling systems can lead to mechanical wear, fluid degradadation, and unnoticed structural fatigue. faulty or poorly maintained gse poses a direct risk to personnel, aircraft, and ground assets. servicing ensures that all mechanical, hydraulic and structural components function safely and as intended. scope of work: 1. ladder frame to be inspected and weld joints for cracks for deformation and it is to be repaired. 2. anti-slip steps, handrails and safety locks to be inspected and to be rectified/changed. 3. caster wheels are to be checked for wear, lock function and lubrication and all the faulty parts are to be repaired/changed as per condition of the(f) equipment. 4. brake function and tow hitch mechanism is to be checked and to be repaired/changed as per condition of the equipment. 5. rust to be removed where required. 6. hoses and fittings are to be inspected for leaks and damages and thoses are to be repaired. 7. filters are to be changed if required. 8. cylinders are to be checked for cracks and are to be repaired. 9. structural integrity of frame and platform is to be checked and repaired as per requirement. 10. wheels are to be checked for alignment or any other bearing issues anfd same is to be repaired. 11. parking brake is to be checked along with the towbar assembly and is to be repaired as per requirement. 12. load securing hooks or rails are to be checked and to be made operational. 13. reservoir is to be checked for contamination and fuel level 14. hand/foot operations is to be checked and made serviceable. 15. dispensing hose nozzles and fittings are to be checked and are to be made serviceable. 16. straightness and structural integrity of bar is to be checked and same is to be rectified if required. 17. all the moving parts are to be lubricated with correct grade of lubes/greases. 18. conduct ndt if required for stress crack detection. 19. cleaning of equipment is to be done before and after servicing. 20. service status and next due date is to be tagged. 21. summary report is to be given to the user after repair of all the repairing work done. 22. adhere to oem servicing guidelines and intervals. 23. use of oem grade consumables and spare parts.
Tender For supply and installation of ats distribution board of dimension 700 x 1600 x 365 mm. the en closure should be made of glass-fiber reinforced polyester (grp) enclosure ingress protection of ip66 (iec 60529) & mechanical impact strength of ik10 (iec 62262). enclosure is having double-insulation (iec 6043 9-1) & is also uv stabilized (iec 62208). material is self-extinguishing (upto 960 degree c - iec 60695-2). o perating temperature ranges from -30 degree c to +120 degree c (iec 60670). rated ac voltage of 1000v and rated dc voltage 1000v . the enclosure gasket materials shall be injected polyurethane. the enclosur e having 180-degree door opening and double bar key locking arrangement. incomer: 185 sq.mm busbar type terminal block - 8 nos for eb and dg incomer with 230v ac r, y, b indicating lamp. 400a fp automati c transfer switch motorized with inbuilt lcd controller and outgoing: 185 sq.mm busbar type terminal blo ck - 4 nos - provision for termination of 185 sq.mm cable in incomer from the top side and 185 sq.mm cabl es for outgoing from the bottom. the manufacturer should submit all the test certificates in accordance wit h iec 61439, routine test report must be made with - high voltage test, insulation resistance test, function al test. the wall mounting frame should be made of hot dip galvanized materials. acceptable make : ca pe/ famatel/hensel/rittal/abb with following switch gear and terminals fixed in the junctio n box as per drawing enclosed. terminal block make: connect well/ elmex switch gears mak e shall be abb/l&t /eaton/siemens,havells, c&s. terminal block makes:connect well/ elmex. [ warranty period: 30 months after the date of delivery ]
Tender For supply under etd-i lucknow - supply of t&p materials associated with line and substation under electy. transmission division-i, lucknow, mechanical hydraulic compressor joint machine motorized, for htls conductor jointeing with htls conductor die (iso certified) minimum technical spedification-capacity : 100-150 ton, power : 05-5.5 hp, stroke : 04 stroke, working pressure : 690 bar) with minimum 03 year warranty. nike or equivalent make, accc htls casablanca conductor jointing hydrolic machine, capacity 100 ton with minimum 03 year warranty. (nike or equivalent make), 05 kv digital insulation tester (megger, motwani or equivalent make) li-ion battery extended capacity, rapid charge and other required ts with minimum 03 year warranty., digital multimeter (4 1/2 digit) (motwane make or equivalent) with minimum 01 year warranty., clamp on meter-digital (fluke or equivalent make ) (0-300-600 a), ac and dc voltage to 600v and resistance to 40 kilohm with minimum 02 year warranty., accc htls conductor jointing toold & wheels etc., four sheave pulley nike or equivalent make with tech spec-breaking capacity 300 kn or more, 22 or more groove, rigit frame type, chain pulley block (5 mt) nike or equivalent make., binocular telescope nikon or equivalent make with tech spec-objective lense dist-50, magnification maximum 8, multilayer coated lense 11.8 mm., tool box with wrench set (nike, taparia or equivalent make) having items-b1 hexagon ringh spanner 6x7-30x32 mm (12 pcs.), double open end spanner 6x7-30x32 mm (12pcs.), pipe wrench (02 pcs), grip locking plier (01 pcs.), circlip plier internal straight (01 pcs.), circlip plier external straight (01 pcs.), side cutting plier (01 pcs), combination plier (01 pcs), long nose plier (01 pcs.), water pump plier (01 pcs.), plastic hammer (01 pcs.) ball pein hammer (02 pcs.), screw driver philips pattern 100 & 150mm (02 pcs.) flat screw drivers 250 & 300mm (02 pc.), two-in one screw drivers (02 pct.), adjustable wrench (01 pcs.), 12.5 square drive sockets 8-32mm (22 sockets) (22 pcs.), reversible ratchet (01 pcs.) extension bar (02 pcs.), safety belt (karam full body harness pn 42, udyogi ub102 or equivalent) with minimum 03 years warranty., hydraulic conductor cutter machine use for all acsr, accc type conductor (nike equivalent make) as per technical specification- (size-3/8 inch, weight-5 kg, usage/application-industrial, warranty- 1 year, crimping stroke-700 bar, cutting capacity-up to 40mm material-ms, hydraulic pressure bar-700, packaging type-tool bos) with minimum 02 years warranty.
Tender For supply installation and commissioning of physics lab at item wise on turnkey basis at govt new model college jhabua 457661 mp india - supply installation of physics lab equipment on turnkey basis, battery charger 2 to 12 volt., ballistic galvanometer with lamp and scale arrangement, spectrometer prism (crown/flint glass), spectrometer 6" 17 ", 30 sec, optical bench with riders double bar, optical bench with riders double bar heavy, inertia table, complete apparatus to verify law of parallel and perpendicular axes for moment of inertia, compund pendulum/bar pendulum, reading telescope, bending of beam apparatus to determine youngs modulus, cantilever to determine youngs modulus, horizontal torisonalpendulamappratus, jaeger apparatlrs to deternrine the surface tension, apparatus to determine the surface tension, apparatus to determine the viscosity of fluid using poiseuiles method, callendor and barnes apparatus to determine the value of mechanical equivalent of heat, measurement of low resistance by carey, potentiometer, lee purpose to determine the hear conductivity of bad conductor of different geometry, apparatus to verify newtons law of cooling, searl apparatus to determine the coefficient of thermal conductivity, sodiurn vapour lamp, transformer for sodium vapour lamp, mercury lamp, transformer of mercury lamp, biprism, complete apparatus to determine the resolving power of a telescope, biquartz are half shade polarimeter, newtons ring apparatus cornplete with travelling microscope power supply and sodium level, electroscope or electrometer, audio fiequency generator, cro dual trace 30 megahertz single tress l0megahertz, i.jse of vibration magnetometer to study a field apparatus, tangent galvanometer, apparatus to study resonance curve for lcr circuit, apparatus for measurement of capacitance and inductance, apparatus to determine the value of plancks constant, complete apparatus to determine e/m using thomson method, complete apparatus to determine e/m by milikons method, apparatus to study the absorption spectra of iodine vapour completes with white light source power supply grating and spectrometer, apparatus to draw bh curve of ferromagnetic material with the help of cro, half wave and full wave rectifier apparatus with built-in power supply, transistor characteristics apparatus with built in power supply and metres, apparatus to study characteristic of tunnel diode, apparatus to study hysteresis curve of transformer core, apparatus to study specific resistance and energy gap of a semiconductor, apparatus to study transistorized regulated power supply, apparatus to study rc coupled amplifier with built-in power supply, zener diode characteristics apparatus with built-in power supply, apparatus to study charging and discharging of a capacitor, complete setup to find the wavelength of sodium light, study of lissajous figure trainer, barton apparatus, digital oscilloscope, adjustable height stands, capillary tube packets of different radii, electrical laboratory kettle with varying voltages, piatinum resistance thermometer, soldering station, desoldering tool, thermocouple apparatus, jfet apparatus to study characteristic curve, hall probe apparatus, plane transmission grating, brewster law apparatus, beam divergence apparatus of helium neon laser, diode laser, holographic diffraction grating, michelson interferometer, logic gates apparatus (or, and not, nand, nor, xor), standard tool box, connecting lead wire for electronic apparatus, flywheel