Latest mechanical pumping machine Tenders | Government mechanical pumping machine Tenders

State Government

CTN :43231427

16 Jan, 2026 NA

Murshidabad - West Bengal

Tender For operation and guarding of high lift pumping machinery alongwith sludge pump, recirculation pump, backwash valve at beldanga w/s scheme under mahyampur-beldanga surface based w_s scheme under medb phe dte

Central Government/Public Sector

CTN :43190531

06 Jan, 2026 NA

Thane - Maharashtra

Tender For supply of steam generator feed control valve, tag no. 3600-cv1 and 3600-cv2, as per npcil-33003-0546-vss , pool boiler cooling water supply control valve, tag no. 7135-cv01 , as per npcil-33003-0547-vss , pool boiler cooling water drain control valve, tag no. 7135-cv07, as per npcil-330030548-vss , steam to hot well control valve, tag no. 3600cv12, as per npcil-33003-0549-vss , steam to atmosphere control valve, tag no. 3600-cv08, as per npcil33003-0550-vss , bleed condenser outlet control valve, tag no. 3332-cv12, as per npcil-33003-0551-vss , make up feed pump recirculation control valve, tag no. 3331-cv1, as per npcil-33003-0552-vss , bleed condenser inlet control valve, tag no. 3332-cv5, as per npcil-33003-0553-vss , make up feed pump supply control valve, tag no. 3331-cv7, as per npcil-33003-0554-vss

Central Government/Public Sector

CTN :42714039

27 Dec, 2025 NA

Yamunanagar - Haryana

Tender For corrigendum : supply of wx9771615262 drg: 31611770128 rev: 00 condenser air evacuation packa ge (vacuum pump) 30scfm itemid: , w96716155317 drg: - rev: 00 complete vacuum pump (bare shaft vacuum pump) spec: he57016 rev: 04 itemi , w96716155465 heat exchanger for vacuum pump package. spec: he57016 rev: 04 size: - itemid: bh010 , wx9771615270 terminal plate for main motor of vacuum pump size: ----- itemid: bh010 , wx9771615289 heaters for main motor of vacuum pump size: ---- itemid: bh010 , wx9771615297 greasing arrangements for main motor of vacuum pump size: --- itemid: bh010 , w97716155067 bearing for motor of vacuum pump (30 scfm) (1set= 2nos) spec: he57016 rev: 04 size: to s , wx9771615300 terminal plate for rc pump mot or size: ---- itemid: bh010 , wx9771615319 heaters for rc pump motor size: ---- itemid: bh010 , wx9771615327 greasing arrangements for rc p ump motor size: ---- itemid: bh010 , wx9771615335 bearing for for rc pump motor (1set= 2nos) size: ---- itemid: bh010 , w96716155325 main motor for vacuum pump spec: he57016 rev: 04 size: - itemid: bh010 , wx9771615343 motor for recirculation pump for 30 scfm vacuum pump size: --- itemid: bh010 , w97716152033 temperature element for vacuum pump spec: he57016 rev: 04 size: - itemid: bh010 , w97716152041 thermowell for temperature element spec: he57016 rev: 04 size: - itemid: bh010 , w97716155822 pressure transmitter for vacuum pump system: 0-1 bar abs spec: he57016 rev: 04 itemid: b , w96716155244 drg: 31611770051 rev: 00 temperature transmitter for vacuum pump spec: he57016 rev: 04 i , w96716155813 level transmitter for vacuum pump spec: he57016 rev: 04 size: - itemid: bh010 , w96716155210 drg: 31611770047 rev: 00 differential pressure switch for vacuum pump. spec: he57016 rev , w96716155490 flow indicator cum switch for vacuum pump spec: he57016 rev: 04 size: - itemid: bh010 , w97716155733 drg: to suit original supply rev: 00 pressure gauge (0 to -1 bar) itemid: bh010 , w97716155741 drg: to suit original supply rev: 00 pressure gauge (service water) itemid: bh010 , w97716155466 temperature gauge 0-100 deg c, for vacuum pump heat exchanger size: 0 to 100 deg c dim. , w96716155457 differential pressure gauge for vacuum pump package duplex filter spec: he57016 rev: 04 , w97716155849 drg: to suit original supply rev: 00 air flow meter (rotameter) for vacuum pump system s , w97716155547 level gauge for vacuum pump separator tank spec: he57016 rev: 04 size: to suit original , w97716117106 supervision of commissioning lump sum per man day charges at site, including every expe , w97716117114 supervision of commissioning lump sum per visit charges (to & fro) including travelling

CTN :43168515

01 Jan, 2026 43.05 Lacs

West Tripura - Tripura

Tender For supplying, installation, testing and commissioning of machines and equipment for civil engineering department at ttaadc polytechnic institute, khumulwng, west tripura for the project improvement of infrastructure in ttaadc polytechnic institute, kh - supplying, installation, testing and commissioning of machines & equipment in civil engineering department at ttaadc polytechnic institute, khumulwng, west tripura under the nec scheme "improvement of infrastructure in ttaadc polytechnic institute, khumulwng, west tripura, district under higher education departmen.", computerized universal testing machine, 6 pillar type, for conducting tests on various types of ferrous and non-ferrous materials; consisting of-loading unit 600 kn capacity, hydraulic jaws and pumping system, clamping jaws for round specimens, clamping jaws for flat specimens, pair of compression plates,for compression test, rollers of 160 mm width and 30 mm diameters, for transverse test, bending table stopper, allen keys, spanners,double shear test attachment, bend rebend test attachment, electronic extensometer., steel bar cutting machine, vernier caliper, stainless steel ruler, 1m length, mixer machineriesconcrete mixerthe counter balanced mixing drum is easy to tilt two cubic feet mix capacity. total drum volume is 3 cubic feet.. suitable for operation on 220 volt single phase, 50 cycle, a.c. supply, isi cube mouldcube mould, with base plate : as per is : 516 with isi mark cube mould, 15 cm x 15 cm with base plate (made of cast iron - isi mark), cement mortar cube mouldcement mortar cube mould cube mould, 7.06cm x 7.06cm with base plate (made of mild steel), vibrating machinevibration machine with timer : is : 4031 this apparatus is suitable for making cubes of 70.7 mm. for mortar strength evaluation. the mould is mounted on a vibrating platform with a frequency of 12,000 400 vibrations per minute. to the platform are attached four matched springs. the whole assembly is operated by a revolving shaft with an eccentric mechanism. the machine is supplied with a timer, a switch mounted on a steel panel and a 70.7 mm. steel cube mould with a base plate., electronic balancecapacity 500gm, 0.01 gm accuracy, electronic balancecapacity 5kg, 0.1 gm accuracy, electronic balancecapacity 20kg, 0.5 gm accuracy, electronic balancecapacity 100 kg, 10g accuracy, air permeability apparatus (blaine type)isi certification mark is;5516, fitted in aluminium box, vibrating tablevibrating table for compaction concrete cube, cylinders the table deck size 50 cm x 50 cm and has stops along its edges to prevent moulds from walking off the table during vibration the variably pitch pulley arrangement permits the frequency to be varied sleeplessly between a maximum of 3600 vibrations per minute a speed regulation handle is provided for increasing or decreasing the frequency. the vibrating deck. a switch is provided for starting the motor. operation on 440 volts, three phases, a.c. supply. table top - 50 cm x 50 cm, curing tankwater curing bath with agitation system digital indicator for temperature * 24- hour cycle from time of mixing * controlled 100 c +/- 2 c. temp. for concrete * controlled 27 c + 2 c curing temperature for grey cement the tank has been designed to accommodate 150 mm / 70.6 mm casted cubes up to 12/24 cubes and fully insulated. complete with a hinged lid, heated, thermostat and recirculation pump. provision of two removable racks allowing free circulation of water around each cube. the pump, drain valves and electrical equipment are housed in a compartment located at one end of the tanks. the tank is heated by an immersion heater under normal conditions and refrigeration system for grey cement, the temperature is controlled at 35deg.c. +/- 2 deg.c, for about 15 minutes after immersion of the freshly-made specimens. curing tank for 12 moulds of 150mm/24 moulds of 7.06mm, vicat apparatus boxwith isi certification mark, is:5513, fitted in aluminium, le-chatelier mouldwith

corporations/Associations/Others

CTN :43164202

22 Dec, 2025 NA

Bardhaman - West Bengal

Tender For supply of mechanical seal for recirculation pump

State Government

CTN :43162593

27 Dec, 2025 NA

Malappuram - Kerala

Tender For supply of rotary evaporator with vacuum pump and recirculation chiller,rotary evaporator with vacuum pump and recirculation chiller,rotary evaporator with vacuum pump and recirculation chiller,bath sonicator with custom mesh,bath sonicator with custom mesh,bath sonicator with custom mesh,hot air oven,hot air oven,hot air oven

CTN :43115762

18 Dec, 2025 NA

Mysore - Karnataka

Tender For supply of mechanical items at bnpm plant, mysore--, shaft for mixed flow pump, paper primary clarifier recirculation pump shaft, nitric acid pump shaft, paper daf centre support wheel, paper daf drive wheel, paper daf front wheel, pulp daf front wheel, wilo pump shaft, wilo pump shaft sleeve, paper daf scoop support wheel, toothed pulley for overlapping top rubber roll (item no.2), article:, 03790906, moc: ms, toothed pulley for overlapping top rubber roll (item no.1), article: 03790907, moc: ms, toothed drive pulley for stepped shaft b/w cc-1 & cc-2, article: 03701265, moc: ms, toothed drive pulley for paddle shaft,, article: 03721001, moc: al alloy,, hardness: 65hrb, drive timer pulley for sheeter overlapping motor, shaft for rewinder baby roll core adapter, bearing housing for rewinder baby roll core adapter,, end cover for rewinder baby roll core adapter bearing housing,, fly wheel (infeed drum) for sheeter in feed section,, roller for gate 2 & 3, article no: 03040137, roller for double gate, moc: en-19,, support plate for overlapping paddle shaft nde,, sliding rail for cross cutter motor,, inner shaft for paddle shaft in sheeter, paddle shaft for sheeter, sheeter gate frame

corporations/Associations/Others

CTN :43050781

05 Jan, 2026 2.25 Crore

Sonbhadra - Uttar Pradesh

Tender For supply of maintenance of turbine and its auxiliaries of btps obra d d - 51 to 100 , attend flange or bonnet lkg of hp valve or hp pipe101 to 150 , attend flange or bonnet lkg of hp valve or hp pipe151 to 200 , oh of by pass valve of temp control line or patch welding work in the condenser or hot tightening of ejector , clean of filter of tur oil or h2 cooler str , oh of main steam line valve i. e. v2 6 , oh of feed line valve with by pass valve , oh of nrv of extraction line, es-1 or es-2 or ipt transfer pipe line drain valve , oh of nrv of extraction line,es-8 or es-11 or oh of nrv of hp drip or cep disch line , oh of valve cont. to cond dw-4 or 38- 41 or ca-5 or as-47 or as-48 valve , oh of stm throw valve to cond or iso lph-2 , oh of steam by pass valve v2-27 or 15 or v2-7 , oh of extrac valve i. e. es-3 or 4 or 5 or 6 or 7 or oh of drip line gate valve hd-21or 29 or 30 or 31 , oh of fcnrv or isolating valveof lph-3 or 4. , oh of condensate throw off valve to cond , rep of es-9 by h. p welding tech, , rep of v227 or 15 by h. p welding tech, , rep of v2-38 or 81-84 by h. p welding tech, , oh of actuators of msv-l or r , oh of actuators of dw-4 or 38- 41 or ca-5 or cst makeup valve or es-3 to7 or hd-21 or hd-29 to 31 or as 47 or 48 , oh of actrs of v2-38 or 81-84 or 27 or 15 or v2-7 or steam iso valve lph-3 or 4 , oh of actrs of butterfly valve , oh and revisioning of lph-2 to lph-4 or gc-i or gc-ii or lph-1a or lph-1b , oh of gauge glass of lph or gc or ejc or dea o rcon , tight. of flange of crh or gc-i or ii or lph , overhauling of dss of aux. , prds-ii , overhauling of main flash tank , overhauling of aux flash tank , repair or replacement of broken hanger. , tightening of loose hangers. , attend the flange leakage of crh line. , serv of hydr. brake of chit or gar crane , chk and grs. of brg,cplg,chang bush of bolt or serv of greep brake of chit or garlic crane or sevicing servicing of all the wheel of garlic or chitram crane and plate , oh of small hook of chit or garlic crane or oh main hook , serv. of all gear boxes of chit or gar crane , check and clean of wire rope drum or bearing , oh of dss of aux. prds , cut and weld and repl of lp valve up to 50 mm , cut and weld and rep of l. p. valve51 to 100mm , cut and weld and rep of l. p. valve101 to 150mm , oh of isolating or bypass valve of pcv 5 or 14 or 17 , oh of valve contd to dea at 13 mtr v2-21 or cst makup valve , oh of suc valve of bfp or disch valve of cep , oh of suction valve of cep or mc-18-25 or 33 or 37 or oh of u bend valve , fab of reducer for hp drip 218-80 or 168-80 , rep of reducer of h. p drip line , lph drain line valve hd-8 or 9 or 14-19 or 20 , check and rect of internal fault of dea , blanking of crh line for reheater ht , rem chocking oil drain of brg1 or 2 of tur. , rem chocking of drain of cntg. machine. , repl of damaged nrv of pcv-14 or 17 size200 , repl of damaged nrvof feed line size-250 , oh of butterfly valve of condenser , hot tightening of cross over pipe , oh of hp heater and attend of flange lkg. , attending the shell joint of hph , attend the spot lkg of hph shell joint. , oh of safety valve of flange or stud heatng or lp heater or hp heater or cbd tank , oh of safety valve of warm up line , oh of safety valve of aux prds or deaerator or oh of nrv of aux rpds heat line to fst , oh of nrv v2-52 or v2-53 or v280 , oh of nrv of re-circulation line of bfp or spindle leak off line , oh of h. p. valve and nrv. , oh of h. p. steam drain line valve. , rep of nrv of hph drip to deaerator , welding of crack in hph or crh pipe line , fab of bend for recirculation line or oh of group protection valve i. e. fw-1 , fab of bend for hph drip line con to dea , fab of bend of lph drip to drip pump or condenser , rep of bend of hph drip line con to dea , rep of bend of rc line con to dea or oh of //bid details2 / 106feed pump energy absorber. , rep of bend of lph drip to drip pump or condenser , cutting and welding of h. p. valve 15 to 50mm , cutting an

Mechanical Pumping Machine Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

State Government

corporations/Associations/Others