Latest medical cabinet Tenders | Government medical cabinet Tenders

Central Government/Public Sector

CTN :42114171

15 Oct, 2025 NA

Roorkee - Uttarakhand

Tender For refrigerated bench-top laboratory centrifuge, universal table-top

Central Government/Public Sector

CTN :41489566

13 Oct, 2025 1.00 Crore

Noida - Uttar Pradesh

Tender For corrigendum : open tender document for e-procurement of laboratory equipment (soil, aggregates, cement, reinforcing bar, concrete test equipment, water, geo-textile and geogrid) for material testing laboratory of iahe - soil, unconfined compressive strengthcompression device with digital load frame: hydraulic proving ring, dial gauge vernier callipers, timer, oven, weighing balance, shear strength vane shear apparatus, grain size analysis as per is:2720 (part- iv)pipette apparatus (i) sampling pipette (ii) glass sedimentation tubes (iii) weighing bottles (iv) deleted (v) stirring apparatus (vi) sieves -2mm, 425umm , 75umm is sieves (vii) deleted, specific gravityhydrometer apparatus: two 1000 ml graduated cylinders, dispersing agent solution containing sodiumhexa-metaphosphate, dessicator and centimetre scale., shrinkage limit testfull set of equipments 1.) evaporating dish of porcelain, 2.) spatula and straight edge, 3.) balance-sensitive to 0.01 g minimum.4.) shrinkage dish. circular, porcelain or non-corroding metal dish, 5.) glass cup. 50-55 mm in diameter and 25 mm in height,6.) glass plates. two, 75x75 mm one plate of plain glass and the other prongs, 7.) thermostatically controlled oven,8.) wash bottle containing distilled water, 9.) graduate-glass, with capacity of 25 ml. 10.) mercury., sand equivalent value(i) graduated cylinder (ii) irrigator tube (iii) siphon assembly (iv) weighted foot assembly (v) measuring can (vi) sieve -4.75mm (vii) funnel (viii) 4- litre bottle (ix) flat pan (x) timing device (xi) sand equivalent shaker, ph test -electronic method(i) ph meter (ii) digital balance 300 gm capacity-sensitive 0.001gm (iii) 100ml glass beaker -3nos. (iv) volumetric flask-500ml -nos. (v) wash bottle-100 ml (vi) mortar with rubber covered pestle, aggregates, polished stone value (i) accelerated polish machine mounted on firm ,level and non resilient base of stone or concrete (ii) road wheel (iii) means for rotating road wheel (iv) means for bringing the surface of a rubber-tyred wheel of 20 cm diameter and 5 cm breadth to bear on the stone surface of the road wheel with a total load of 40 kg. (v) means to feed the sand and water at a uniform rate (vi ) means to feed the emery powder and water at uniform rate (vii) friction tester: is: 2386 part 4 as per specification of rrl uk (viii) 25 kg hard siliceous sand (ix) emery powder 5 kg, alkali aggregate reactivitymortar bar method: scales, weights, sieves, glass graduates, specimen moulds, mixing bowl, tamper, trowel, containers, length comparator, alkali aggregate reactivity chemical method:1. electronic balance2. pulveriser3. reaction container, reagents, glassware, petrographic examination 1. geological hammer2. petrographic microscope3. screen confirming to is sieve4. digital balance5. portable handheld cutting machine6. hand lens7. glass sides etc., deleterious material & organic impuritiessedimentation pipette: a watertight screw-topped glass jar, 1000 ml measuring cylinder, chemicals, containers, sieves, cement, soundness (autoclave apparatus)graduated glass cylinders, moulds, autoclave, length comparator, compaction (mortar cube vibrator), fineness (blaine air permeability apparatus), ph meter ( 2 in nos.), reinforcing bar (steel), reinforcing bar (steel) universal testing machine,to determine unit weight, yield strength,, proof stress, ultimate tensile strength, % elongation, bend and re-bend test, concrete test equipment, vibrating table 1mx1m(full set of equipments), needle vibrator ( 2 in nos.), permeability, dry shrinkage (shrinkage apparatus) ( 2 in nos.)(full set of equipments), air content (air entrainment meter apparatus)(full set of equipments), durability (rapid chloride ion permissibility apparatus), depth of penetration (water permeability apparatus) ( 2 in nos.)(full set of equipments), water, physical analysis of water, geo textile and geogrid, pull-out resistance of geotextile /geogrid

CTN :42113460

10 Oct, 2025 45.0 Thousand

Amritsar - Punjab

Tender For tender for supply of conducting nenessary tests to ascertain soil safe bearing capacity sbc for building 03 nos at work site by drilling holes collecting samples of disturbed and undisturbed soil , 150 mm bore of depth 0 to 10 meter for building and shed according to is 1892 1988 and is 1892 1979 two bore in corner and one bore in centre , conducting of laboratory test on disturbed undisturbed soil samples as per project requirement after completion of boring as given below , sieve analysis and grain size distribution by sieve analysis and hydrometer test , atterberg limits , natural moisture content , particle size analysis test , bulk and dry density , specific gravity , free swell index and swelling properties of soil , organic matter in soil if any , consolidation test compressed index value , triaxial compression test and determination of shear parameters c and o test as per relevant is codes , harmful salt c value , the firm shall submit the soil investigation completely covering the following , bore log chart showing depth of soil strata , ground water table , probable maximum and different settlement , safe bearing capacity based on shear and settlement , recommendation for type and depth of foundation , the location of bldg bores shall be given by ge , preparation and submission of report in 06 copies containing all above test results graphs charts calculation including marking location on site plan alongwith photographic record etc , recommendations all pages of report claculation sheet and connected documents will be serially numbered stamped and signed by consultant

CTN :41568088

03 Oct, 2025 NA

Kapurthala - Punjab

Tender For bid to ras bid to ras corrigendum : supply of steel almirah , steel almirah small , fully plastic moulded chair with arms seat andback cushioned , executive table or office table , library almirah steel glass front cabinet , laboratoryor libraryorcanteen table , drawing stool , computer table , computer and printer table , steel rack , conference room table , chemistry lab table , foot rest , laboratory table with boxes , lecture stand , laboratory table with drawers , notice board , single seat sofa , three seat sofa , revolving chair big , revolving chair small "steel almirah : size:- height-1981mm, width-916 mm, depth - 486mm construction: - the almirah should have welded type construction. the thickness of back panel should be 0.8 mm, other components the thickness should be 0.9mm and the shelf thickness should be 1.2 mm doors & handles: - the almirah should have full height steel hinged door & should be provided with handle. locking: - the almirah should be provided with 3 way locking mechanism & shooting bolt arrangement. shelves & load bearing capacity: - the almirah should have height wise adjustable shelf mounting and uniformly distributed load capacity per each full shelf should be 80 kg and shelves should be 4 in number and should be fully adjustable. powder coating process: - all the metal parts shall be given antirust surface treatment & and shall be powder coated with epoxy polyester powder. it shall involves an 8 step treatment. final finish shall consists of poxy polyester powder coating of approved color & shade with a dry film thickness of minimum 40 microns. the testing of paint shall be done for various physical & chemical properties as per is: 101. the material shall then be oven baked with a ) /bid number : gem/2025/b/6561795 * /dated: 25-08-2025 & & / bid document 1 / 35 controlled temperature of 1800c to 2000c. manufacturer/ supplier must have iso- 9001, 14001, bifma & ohsas certifications. certificates should be attached. leveler:-it should have leveler with m10 screw type leveler with hexagonal plastic base. ", "steel almirah small : size:- height 1270 mm, width 765mm, depth 440 mm construction: - the almirah should have welded type construction. the thickness of back panel should be 0.8 mm, other components the thickness should be 0.9mm and the shelf thickness should be 1.2 mm doors & handles: - the almirah should be provided with full height steel hinged door & should have handle. locking: the almirah should have 3 way locking mechanism with shooting bolt arrangement. shelves & load bearing capacity: - the almirah should have height wise adjustable shelf mounting and uniformly distributed load capacity per each full shelf should be 80 kg maximum and shelves should be 3 in number and should be fully adjustable shelves. powder coating process: - all the metal parts shall be given antirust surface treatment & and shall be powder coated with epoxy polyester powder. it shall involves an 8 step treatment. final finish shall consists of poxy polyester powder coating of approved color & shade with a dry film thickness of minimum 40 microns. the testing of paint shall be done for various physical & chemical properties as per is: 101. the material shall then be oven baked with a controlled temperature of 1800c to 2000c. manufacturer / supplier must have iso- 9001, 14001, bifma & ohsas certifications. certificates should be attached leveler:- it should have leveler with m10 screw type leveler with hex plastic base ", "fully plastic moulded chair with arms (seat &back cushioned) : size - total height : 820mm + 10mm, total width : 565mm + 10mm, total depth : 565mm + 10mm &total weight: 4.20 kg + 50gms cushioned chair with arms comprising of single piece moulded frame made of polypropylene & coated with pu coating paint high gloss finish with seat & back cushion made of moulded pu foam and velvet upholstery. weight of moulded poly

State Government

CTN :41750164

06 Oct, 2025 NA

Kolkata - West Bengal

Tender For corrigendum : laboratory wet shaking mineral separation table

State Government

CTN :41750172

09 Oct, 2025 NA

Kolkata - West Bengal

Tender For corrigendum : supply installation of laboratory wet shaking mineral separation table - shifting and repairing of fumehood by thoroughly opening, checking, and fixing, also, it will include the change of pulley lock and ss rope. the work will include appropriate ducting of the fumehoods during reinstallation., shifting, thoroughly opening, cleaning, fitting, and fixing of the chemical cabinet, along with ducting associated with it during reinstallation., shifting and repairing of a lab bench with a granite top (size 10 ft x 3 ft) and fitting with drawers and cabinets below the lab bench.it must include granite cutting and setting with adjustable nut bolt., water basin repairing, reinstallation, andfitting and fixing with nuts/ bolts, with appropriate clamps, door lockhinge with a bottom portion having a storage rack., installation of the air exhaust motor 440v, along with the pipeline, by opening and re-fixing. it will include blower motor repairing and ball bearing changing., reestablishment of electric connection for fumehoods in the new lab, blower motor cable, and starting relay control board. installation of switch lamps for the fumeoods., air pressure monitor repairing and servicing for the fume hoods.adaptor sensor data cable complete fitting and fixing., complete painting of fume hoods.inner & outer, chemical storage and lab bench, as well as a wash basin.

Central Government/Public Sector

CTN :42061876

18 Oct, 2025 NA

Indore - Madhya Pradesh

Tender For supply of laboratory furniture d d - wall bench , wall mounted storage cabinet , ss table with wheel one shelf , ss 304 movable slotted angle rack , ss 304 double decker trolley , emergency safety shower , ss dustbin , ss revolving stool , static pass box

Private Sector

CTN :42060415

17 Oct, 2025 NA

Jhajjar - Haryana

Tender For supply of m2732156001 godrej laboratory furniture- complete as , m2732156002 godrej lab stool , m2732156003 godrej lab chair , m2732156004 godrej lab table

CTN :42067288

06 Oct, 2025 NA

Allahabad - Uttar Pradesh

Tender For supply of chair (without wheels) for general purpose (q2) , modular table / meeting table / centre table (v2) (q2) , metal storage cabinet (q2) , modular extendable conference table (v2) (q2) , revolving chair (v5) (q2) , metal beds (v3) (q2) , computer table (v2) (q2) , wooden shelf / case / rack / credenza / modular storage (v2) (q2) , laboratory benches (v2) (q3) , metal shelving racks (adjustable type) confirming to is 1883 (v2) (q2) , steel bookcases confirming to is 7761 (v2) (q2) , composite office tables confirming to is 8126 (v2) (q2)

CTN :42034128

06 Oct, 2025 NA

Allahabad - Uttar Pradesh

Tender For supply of chair (without wheels) for general purpose (q2) , modular table / meeting table / centre table (v2) (q2) , metal storage cabinet (q2) , modular extendable conference table (v2) (q2) , revolving chair (v5) (q2) , metal beds (v3) (q2) , computer table (v2) (q2) , composite office tables confirming to is 8126 (v2) (q2) , wooden shelf / case / rack / credenza / modular storage (v2) (q2) , laboratory benches (v2) (q3) , metal shelving racks (adjustable type) confirming to is 1883 (v2) (q2) , steel bookcases confirming to is 7761 (v2) (q2)

Medical Cabinet Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government

State Government

Central Government/Public Sector

Private Sector