Latest metal frame Tenders | Government metal frame Tenders

Central Government/Public Sector

CTN :40509890

30 May, 2025 NA

Kanakapura - Karnataka

Tender For supply of set of partition frame for lhb scn amrit bharat coach (shell) note:-firm sh all collect all latest/final drawings before manufacturing. there may be minor modifi cation in design to suit railway requirement & modification to be carried out by firm at no further cost to railway. , as per drawing: mp24pflhbabscn version 8, packing instruction: wooden cage [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40511039

23 Jun, 2025 NA

Kapurthala - Punjab

Tender For supply of set of panel (switch board cabinet) for lhb eog non ac coaches, as per draw ing: edts355,rev-1,am-6 with rdso modification sheet no.rdso/pe/ms/tl/0090-2023(rev-0), p acking instruction: electrical panels to be protected with transparent biodegradable pol ythene bag/sheets thickness of 0.1 mm or an antistatic bag of 350 to 400 gauge (100 mic ron approx.) on all sides of panel &panel shall be packed in transport worthy wooden cage. bottom frame to be made of wooden planks 20mm thick &should have support of at least 3 wooden batons of size 100x100mm of suitable length to facilitate lifting by f ork lifter &secure properly with suitable packing to avoid in-transit damage. each panel to be packed in transport worthy wooden cage of suitable dimensions made out of wooden strip of 20x100 mm size. gap between each strips should not be more then 10 0mm.a list should be pasted on each wooden cage showing order no, pl no, description, drg /spec. no, qty, firm'name &address, consignee name, date of dispatch, t op bottom arrow mark etc. note-1.the item &its packing shall carry a qr code(optional) containing the details as listed below (qr code(optional) to be affixed near name plate of item &on top of packing) a)name of the manufacturer b)purchase order number c)purchase order date d)unique serial number (or lot number f or bulk items) of the manufacturer or e)date of manufacture < manudate> f)delivery challan no. g)delivery challan date 2 . the qr code(optional) shall be as per iso/iec 18004 model2 and the data shall be availa ble as xml using the tags detailed above. 3. in case the above details are not available, or the qr code(optional)s are not readable, the supplied material is liable to be rejected. [ warranty period: 30 months after the date of delivery ]

State Government

CTN :40279010

16 Jun, 2025 193

Bengaluru - Karnataka

Tender For e- tender for supply of spine, fms other implants high end - frame plate 3d (micro plates 0.2mm - 0.8mm), dermal matrix wound dressings size 10x25cm, dermal matrix wound dressings size 10x12.5 cm, dermal matrix wound dressings size 5x5 cm, jess fixators for hand fracture, suture anchors (for tendon achilles repair), rack for 8 instruments with clamp box, instrument case 130 x 230 x 25mm, micro scissors straight scissor blade 10mm, forceps with plateau tip 0.3mm smooth, micro forceps with plateau tip 0.6mm angulated, micro scissors curved - scissor blade 10mm, double clamps 24mm, 1.5 - 2.3mm vessel, double clamps 16mm, 1.0 - 2mm vessel, double clamps -11mm, 06-1.4mm vessel, single clamps 24mm, 0.6 - 1.4mm vessel, single clamps 16mm, 0.6 - 1.4mm vessel, microvascular single clamps 11mm, 0.6 - 1.4mm vessel, calcaneal fracture fixation plate and screws, lisfranc plate and screws, first 1st mtp fusion plate and screws, lapidus fusion plate and screws, mini tight rope for mallux valgus, ankle fusion plates, fibre wires, achilles tendon repair by speed bridge, foot plates, memory staples, tenodesis screws, syndesmosis repair with tight rope, suture anchors for brostrum repair, internal brace for brostrum repair, deltoid ligament repair using suture anchors, deltoid ligament repair with internal brace, autocart - all autologous cartilage regeneration, suture anchors for achilles tendon 5.5 mm double loaded with needles, extra osseous talotarsal stabilization (eotts) implant (sinus tarsi screw), screws for corresponding plate thickness of length 4mm, 6mm, 8mm, 10mm (large 2mm to 2.8mm), a)10 hole continuous plate (large 2mm to 2.8mm), a)6 hole with gap (large 2mm to 2.8mm), a)4 hole with gap (large 2mm to 2.8mm), a)3 hole with gap (large 2mm to 2.8mm), a)2 hole with gap (large 2mm to 2.8mm), h plate (large 2mm to 2.8mm), l plate right and left (large 2mm to 2.8mm), titanium strut plate 18 hole (large 2mm to 2.8mm), double y plate (large 2mm to 2.8mm), y plate (large 2mm to 2.8mm), a)20 holes adaptation plate (large 2mm to 2.8mm), screws for corresponding plate thickness of length 4mm, 6mm, 8mm, 10mm (medium plates 1mm-2mm), a)10 hole continuous plate (medium 1mm to 2mm), a)6 hole with gap (medium 1mm to 2mm), a)4 hole with gap (medium 1mm to 2mm), a)3 hole with gap (medium 1mm to 2mm), a)2 hole with gap (medium 1mm to 2mm), h plate (medium 1mm to 2mm), l plate right and left side (medium 1mm to 2mm), titanium strut plate 18 holes (medium 1mm to 2mm), x plate (medium 1mm to 2mm), double y plate (medium 1mm to 2mm), y plate (medium 1mm to 2mm), a)20 holes adaptation plate (medium 1mm to 2mm), orbital mesh (0.2- 0.4mm), screws for corresponding plate thickness of length 4mm, 6mm, 8mm, 10mm (micro plates 0.2mm - 0.8mm), a)10 hole continuous plate (micro plates 0.2mm - 0.8mm), a)6 hole with gap (micro plates 0.2mm - 0.8mm), a)4 hole with gap (micro plates 0.2mm - 0.8mm), a)3 hole with gap (micro plates 0.2mm - 0.8mm), a)2 hole with gap (micro plates 0.2mm - 0.8mm), titanium strut plate 18 holes (micro plates 0.2mm - 0.8mm), x plate (micro plates 0.2mm - 0.8mm), double y plate (micro plates 0.2mm - 0.8mm), y plate (micro plates 0.2mm - 0.8mm), a)20 holes adaptation plate (micro plates 0.2mm - 0.8mm), orbital rim (micro plates 0.2mm - 0.8mm), deformity reduction set, cobalt chromium rods 5.5 mm x 400 mm, mis battery or manual operated disc aspirator 1-2.5 mm, with 0.5 mm increment 13 - 19 gauge with 2mm increment straight or curved, anterior peek cervical standalone cage, intergrated peek cage with titanium screw locking mechanism 6mm-12mm length, self locking screw mechanism, 35 degree screw angulation cephedal to caudal, self drilling screws 3.5mm, 4mm, mis polyaxial set scerw accomadating 5.5mm rods, mis contoured or straight rods dia 5.5mm with sharp edge for edge for easy insertion, mis polyaxial screw with attachment option of plastic retractor for direct imaginga and visualization of rod, modified design for set screw insertion dia 5 t

Central Government/Public Sector

CTN :40492061

06 Jun, 2025 NA

Varanasi - Uttar Pradesh

Tender For tender for supply of induction motor - tefc squirrel cage induction motor frame foot mounted size 100l , tefc squirrel cage induction motor foot mounted frame size 90l , tefc squirrel cage induction motor flange mounting frame size 90l , tefc squirrel cage induction motor foot mounted frame size 112m , tefc squirrel cage induction motor foot mounted frame size 100l

CTN :40507924

18 Jun, 2025 NA

Srinagar - Jammu And Kashmir

Tender For supply of poster for vr training room , non skidable rough pattern green grass mat for training room , virtual reality training diffused green light , perimeter marking metal frame for oculus training , night training led lights for training room

CTN :40466703

11 Jun, 2025 15.00 Lacs

Barwaha - Madhya Pradesh

Tender For supply of flex printing rates including all taxes, transportation levis and other expenses. nothing but only gst would be paid additionally. - flex printing rates including all taxes, transportation levis and other expenses. nothing but only gst would be paid additionally., normal flex without frame(rate per sqft), star flex without frame(rate per sqft), normal flex with metal frame(rate per sqft), star flex with metal frame(rate per sqft), normal flex with wooden frame(rate per sqft), star flex with wooden frame(rate per sqft), vinyl sticker with sunboard sticker/cutout(rate per sqft), cut out/pasting work over frame(rate per sqft), glow shine board(rate per sqft), retroreflective type shine board over steel frame(rate per sqft), retroreflective type shine board over ms frame(rate per sqft), black star flex(rate per sqft), ms frame(rate per sqft), wooden frame(rate per sqft), pamphlet sze 8.5x11(rate per item), multicolour sticker(rate per item), videography(rate per minute), colour photograph(rate per photograph), shilalekh granite stone gravel writing(rate per sqft), shilalekh granite stone stricker writing(rate per sqft), a4 size pamphlet(rate per item), a5 size pamphlet(rate per item), legal size pamphlet(rate per sqft)

CTN :40468478

05 Jun, 2025 17.50 Lacs

Salem - Tamil Nadu

Tender For purchase of mini lorry for public health use in p.n.patty town panchayat - a hopper tipper dumper is a truck designed for carryingmaterial, which may be garbage, construction material,mining minerals and any other loose material. the truck isfi tted with specially designed hydraulic tipping mechanismdriven by pto or power pack, which enables the dumper(rear portion expect the driver cage) to move up and downfor unloading of the material. it is the safest way to quicklytransport loose materials from one site to another., generic parametersvehicle category, generic parametersvehicle category, vehicle engine cubic capacity (cc), type of fuel, vehicle emission compliance, number of cylinder in engine (nos), vehicle mileage (declared by oem as certified by test agencyunder rule 115 of cmvr 1989) (kmpl), gradeability of vehicle (degree in first gear), maximum engine power range (in kw), max engine power (kw@rpm), max engine torque (nm@rpm), fuel tank capacity (liter), category of vehicle for which chassis to be used, overall length of vehicle (mm), overall width of vehicle (mm), overall height of vehicle (mm), ground clearance (mm), minimum wheel base (mm), type of tyre and tube (for both front and rear), front vehicle brake, rear vehicle brake, vehicle transmission system, type of steering, turning radius (mm), nos of forward gears, vehicle air intake system, type of clutch, axle configuration, front axle suspension system, rear axle suspension system, air conditioning, standard spare wheel and tool kit, warranty period, battery warranty (month), number of free service (nos), fabrication description, type of tipper, define type of tipper, tipping angle (degree), hopper tipper dumper container capacity/volume (cubicmetres), tipper body pivot length (mm), tipper body length (mm), tipper body height (mm), overall height of tipper from ground (mm), dumping height (mm), body plate thickness (mm), tipper sub frame thickness (mm), hydraulic system, tipping hydraulic cylinders(make), hydraulic system driven by, tipper container material, engine oil pressure level indicator in control panel, fuel gauge indicator in control panel, engine cooling liquid temperature indicator in control panel, operating hour meter, locking/unlocking of tipper discharge container, lowering/lifting of tipper discharge container, counter weight, insurance charges, temporary registration charges & permanent registration charges

CTN :40500749

23 Jun, 2025 NA

Bijnor - Uttar Pradesh

Tender For supply of three phase sq. cage induction motor, m/c no.-h2569260009, kw-7.5, hp-10, amp-15, rpm-948, v- 415, hz-50, duty- s4. 40%, frame-kd132m, foot mounting, amb. temp - 45 degree c, de brg-6208zz, nde brg-6207zz, wdg. conn. delta / , ref-is:325, inscl-f make-marathon electric / bharat bijli / kirloskar note-no parameter change is allowed since motor will be utilized in long travel. [ warranty period: 30 months after the date of delivery ]

CTN :40344440

29 May, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - office space; repair of compactor; service provider compactorrepairing and restoration of compactor set including complete overhaul of track mechanism, replacement of damaged rollers and bearings, lubrication and alignment of moving parts, repair/replacement of locking mechanism, reinforcement of metal frame, replacement of rusted or damaged panels, application of anti-rust coating, repainting, and final functional testing to ensure smooth operation and surability.

Central Government And Public Sector

CTN :39429743

29 May, 2025 NA

Damanjodi - Odisha

Tender For bid to ras corrigendum : tender for supply of 1000069739 motor - 55kw 1475 rpm motor , frame nd 250md 415v , 75kw , fs280sm , 1500 rpm , compressor motor , 75kw , frame315 sm , vsd application motor , 90kw , 3ph squirrel cage , induction motor , 90kw , 415v , frame315sm , rpm1485 , b3 , motor , 110kw , fr 315ml , rpm 1480 , b3 motor , 132 kw , 1500 rpm , b3 mounting comp.motor , 7.5kw , 1500 rpm , 132m frame , sql.ind.motor

Metal Frame Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government And Public Sector