Latest metal halide lamp Tenders | Government metal halide lamp Tenders

corporations/Associations/Others

CTN :41225970

05 Aug, 2025 1.07 Lacs

Kolkata - West Bengal

Tender For arrangement of decorative lighting at alimuddin street and other areas in ward no 62 on the occasion of fateha doaz daham in the year of 2025 - hire charges for supply and fixing of metal halide flood light fittings for 400watt metal halide lamp /200 watt led flood light fittings with all accessories as required and wiring with proper size pvc wire including mains, sub main, switches etc and maintaining the same for: 1st night, hire charges for supply and fixing of metal halide flood light fittings for 400watt metal halide lamp /200 watt led flood light fittings with all accessories as required and wiring with proper size pvc wire including mains, sub main, switches etc and maintaining the same for: -do-subsequent night., hire charges for supply and fixing of temporary chain light arrangement with led chain ( 50 number led per set & approximate gap of six inch between two led ) including necessary connection and maintain the same for: 1st night, hire charges for supply and fixing of temporary chain light arrangement with led chain ( 50 number led per set & approximate gap of six inch between two led ) including necessary connection and maintain the same for: do ... for subsequent night, estimated amount

Central Government/Public Sector

CTN :39671456

01 Aug, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : supply of hvla hcdas and fdsiao - helicopter deck lighting , landing period designator , stabilised horizon reference system , advanced ship glide slope indicator , helicopter crash on deck alarm system , flight deck status indicating and ordering system , lso compartment lights with control gear , air briefing room light with control gear , lso console , ob spares , commissioning spares , special cables , documentation , training cost , servce engineer charges , cost of extended warranty , any other item

CTN :41203469

25 Aug, 2025 1.50 Crore

West Tripura - Tripura

Tender For supply of different machineries - supply of different machineries., automatic knife sharpening paper cutting blade grinding machine machine size: --grinding length 1600 to 1800mm, grinding width 150/160mm.width of the machine table 200 plus mm, grinding motor 4to6kw, cast iron/welded modular construction, smooth/ss inner area to drain out the cooling water drainage, hardened and ground steel bands for main & side guides, easily exchangeable, cast iron table with t slots & clamps, cast iron swiveling table for bevel grinding in one setting swiveling 360 degrees. additional clamping sides with t slots & clamps, *grinding heads should be smooth to move on carriage ways of the bed, branded grinding motor should be used like siemens/abb/kirloskar etc.,mounted with electro coolant pump, accessories required.:a) herded grounded strip. one set., b) grinding stone., c) honing stones.d). stone desser.,e). spl. tools in any, 43 fully automatic heavy duty hydraulic paper cutting machine-- front table length 680 mm.,front table height 900 mm., minimum (hydraulic) clamp pressure 400 kg.,max. (hydraulic) clamp pressure 4000 kg., smallest cut without false clamp 25 mm., smallest cut with false clamp 25 mm., cutting width 1070 mm., clamp opening 130 mm., weight of the machine 2800 kg or above., back gauge speed (normal) 50 mm. per second., back gauge speed (exp) 200 mm. per second or above., operative power supply 350-500v3 phase., max power within 4.5 kw.,machine height within 1700 mm., operative temperature 10 to 55 degree., hydraulic valve and clutch, operative brake system., multi-layer photo electric safety., double stroke prevention/two hand cutting cycle switch., mechanical overload prevention., air table with 8.8 coating.,the machine should be supply with future provision to incorporate programming system od bear minimum expenses., back gauge positional accuracy 0.03 mm., servo motor driver back gauge mechanism., bhartiya cutter hammer makes control gear., perfect binder machine ----4four) clamp, production speed 2500 per hour., book block size, book width 100 to 270 mm., book length 150mm to 440 mm., book thickness 3 mm. to 50 mm., dimension and weight , length x width x height 3200 mm x 1400 mm x 1220 mm, weight - 2700 kg approx., power supply 415 v, 50 hz 3 phase., damper roller washing machine----machine size: 30 width, 70 length,36 height, machine operation:, forward/reverse switch, max roller replacement: 4(four), max roller size :60 , roller wash tray: stainless steel with m.s fabrication, p.s plate processor- dimension (l x w x h)-1170 x 1260 x 860 mm, plate size- 700 x 970mm, developer tank capacity-40 liters., electric voltage-220 volt., speed-300-600mm / min. automatic double side flip top palte exposure-exposing area -960 x 1200 mm, power supply -220 v single phase, exposure uniformity-85-95%, light source should be from bottom of the exposure machine, metal halide lamp with 3kw capacity with instant start, arrangement for exposing from both sides.

Central Government/Public Sector

CTN :41224317

29 Aug, 2025 NA

Mumbai - Maharashtra

Tender For supply of 9 kva 750v/415v/190v ac, 3-phase, star-star-star, (yyy) dry type and air cooled power d istribution transformer for the train lighting load in lhb type non ac coaches confirming to rdso specific ation no. rdso/pe/spec/0158-2010, rev-1. packing instruction: as per standard packing. it should be ensu red that item should not rub during transportation. the item should be packed with adequate strength. tra nsit damage, if any, shall be at the cost of supplier. material must be procured from rcf approved vendors only [ warranty period: 30 months after the date of delivery ]

Central Government And Public Sector

CTN :41199894

04 Aug, 2025 NA

Kaiga - Karnataka

Tender For supply of lamp starter (ignitors - starting device) for hpsv lamps, metal halide lamps) as per is 12449 (part 1 and part 2) (q3) , fixed capacitors (fixed capacitor for single phase ac electric fan) as per is 1709:1984 (q3)

State Government

CTN :40625412

04 Aug, 2025 10.34 Lacs

Jamnagar - Gujarat

Tender For corrigendum : supply of various consumable item for emd-ii at stps. - fevi kwik tube 3 grams, fevi bond, fevicol sr 998 (200 ml/tin), measure tape 3 mtr long, crc-226 contact cleaner in 415 ml/300 gram spray bottle., wd 40 size 340 gms spray bottle manu hardcastle & waud mfg . co . ltd, oks contact cleaner [ 2621 /2 ] size 500 ml [ 275 gms ] spray bottleman u oks speciality lubricants { india } pvt. ltd., ac-90 airosole spray liquid for mart 415 gms, puff seal have polyurethene based foam sealing compound, painting brush size 2" (50 mm), painting brush size 4" (100 mm), elmexterminal connector 16mm sq type-cst-16, elmex terminal block ( cst-10 ), mcb 2 pole 20 amp,l 43220 ro, miniature circuit breaker [mcb] ,3 pole,16 amp.415 volt , 50hz, elcb+mcb 4 pole 63 amp 30 ma, mcb 4 pole, 100 amp, 440 volts, breaking capacity 10 ka, mcb 3 phase,4 pole, 63 amp 440 v ac 50 hz 10 ka, test leads (probes) for digital multimeter, hand lamp holder with 15 mtr wire and protection glass, ag-4 cutting wheel make:bosch, half round flat files smooth 6", screw driver (tester) taparia product no:813 yellow handle (special with neon bulb), screw driver (tester) taparia product no:818.special with neon bulb,generally confirming to is 5579-1985 grade - ii, yellow handle,, pvc insulation tape 19mm x 10 m, ht pvc insulation tape size 0.18 mm x25 mm x 65 mtr length, 6.6 kv busbar /cable couductor protection heat shrinkable sleeve dia .before shrink:50 mmdia. after shrink :20 mm, 6.6 kv busbar /cable couductor protection heat shrinkable sleeve dia .before shrink: 75 mm dia. after shrink : 28 mm for 11 kv ht cable, 1.1 kv busbar /cable couductor protection heat shrinkable sleeve dia .before shrink: 50 mm dia. after shrink : 16 mm for 1.1 kv lt cable, heat shrinkable sleeve,size:45mm/18 mm( for 240/300 sq.mm )for 11 kv, heat shrinkable sleeve for lighting wiring, integral led type solid state indicating lamp module for supply voltage of 230 v ac/dc +/- 10 percentage, sutable to panel cut out 22.5 mm dia ,lens colour - red., hrc fuse link tia-63, 63 amp, hrc fuse link tia-25, 25 amp, hrc fuse 16 amp, alluminium ladder self supported a type having 08 feet length, taparia make utility knife. product no. uk-3., safety solvent co2 contact cleaner, crimper plier,self adjustable crimping tools used for 0.25-6.00 sqmm cable end sleeves, led torch

Central Government And Public Sector

CTN :41180749

29 Jul, 2025 NA

Dibrugarh - Assam

Tender For supply of shunt led signal lighting unit etc. (detail description as per item description).

State Government

CTN :41149940

11 Aug, 2025 NA

Mainpuri - Uttar Pradesh

Tender For corrigendum : supply of lamp ballast for hpsv lamps as per is 15882:2009, is 15885 (q3) , high pressure sodium vapour lamps (hpsv lamps) as per is 9974 (part 1 and 2 ) (q3) , lamp starter (ignitors - starting device) for hpsv lamps, metal halide lamps) as per is 12449 (part 1 and part 2) (q3)

Central Government/Public Sector

CTN :40423941

30 Jul, 2025 12.73 Crore

Bilaspur - Chhattisgarh

Tender For corrigendum : improvement works including highway lighting repair and rehabilitation of structures road safety works etc on simga to bilaspur section of nh 130 in the state of chhattisgarh on item rate basis

Central Government/Public Sector

CTN :41166566

05 Aug, 2025 6.11 Crore

Krishnagiri - Tamil Nadu

Tender For design, supply and installation of highway lighting at 17 locations on krishnagiri to walajahpet section of nh-48 (old nh-46) in the state of tamil nadu on an item rate (percentage) basis

Metal Halide Lamp Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors