Get complete information related to latest Metal Primer Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Metal Primer Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Metal Primer Tenders.
Tender For certain repair to b/r and e/m items in accn of units at dhablan and barsat under ge (n) patiala - taking down cement plaster of any description, any thickness from external surfaces of walls/soffits etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and directed by engineer-in-charge., m&l for cement plastering 15mm thick in cemet mortar 1:4 including mixing of liquid water proofing compound as per manufacturers instructions on brick work or concrete surfaces or in chajjas/parapet walls etc finished even and smooth with using extra cement complete all as specified and as directed by engineer-in-charge. note : wpc will be measured and paid separately., supply only integral water proofing compound complete all as specified & as directed by engineer-in-charge. , m&l for cement plastering 10 mm thick in cemet mortar 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed by engineer-in-charge., m&l for cement plastering 5mm thick in cemet mortar 1:3 as on ceilings or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed by engineer-in-charge., material & labour complete removal of existing treatment of any type/description from walls/rcc surfaces etc with mechanical means/grinder complete all as specified and directed., material & labour complete removal of existing treatment of any type/description from ceilings/rcc surfaces/soffits/ chajjas etc with mechanical means/grinder complete all as specified and directed., material & labour for preparation of plastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed by engineer-in-charge., m&l for applying acrylic wall care putty on internal/external surfaces of walls/ceilings/soffits (thickness vary from 1 to 2 mm as required for desired smoothness and levelling of surfaces in one or two layers) by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving painting etc complete all as specified and directed, material & labour applying 02 coats of exterior emulsion weather proof paint (light shade) to external new plastered walls/rcc surfaces/soffits of chajjas/roof projections/ cantilevers/balcony etc surfaces over & including a coat of exterior wall primer as recommendedby manufacturer complete all as specified and directed., material & labour applying one coats of exterior emulsion weather proof paint (light shade) to external old plastered walls/rcc surfaces/soffits of chajjas/roof projections/ cantilevers/ balcony etc surface complete all as specified and directed., material & labour applying 02 coats of interior oil bound distemper (light shade) to new plastered wall surfaces complete all as specified and directed., material & labour applying one coats of oil bound distemper (light shade) to old plastered wall surfaces complete all as specified and directed., material & labour for preparation of new plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and directed by engineer-in-charge., material & labour for preparation of old plastered of ceiling and applying one coats of white wash complete all as specified and directed by engineer-in-charge., material & labour for preparation of old steel surfaces of any description, over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified, material & labour for preparation of old wood surfaces of any description, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified, material & labour for repair to rcc sunshades, chajjas, balconies, columns, bands, beams and similar rcc work at any position/height by dismantling loose/disintegrated portion
Tender For supply of permanent defence pd rubik of size 2.55m x 2.55m o o and 2.10 m height with thickness of interlocking hollow block 25 mm thick , hdpe laminated sand bag of size 75x40 cm , shs 6 mm thick size 120x120mm x 2.4m long for column with holes , ismb 150 rsj 150 x 75 mm g1 3050 mtr long for beam , ismb 150 rsj 150 x 75 mm g2 2.20 mtr long for beam 2 , ismb 125 rsj 125 x 70mm g3 0.40 mtr long for beam , 6 mm thick ms base plate of size 150x150mm for shs column , 12mm dia nut bolt 75mm long inserted in 12mm dia eight nos hole in each column. , steel roofing trough srt of size 1630 mm x 613 mm x 180 mm made out of 2 mm thick hot rolled carbon steel sheet , ms hexagonal nuts. bolts and washers 12 mm dia 40 mm long. , ldpe sheet 3 m wide weighing 1.00 kg rm black in colour , red oxide primer conforming to relevant is , synthetic enamel paint colour green , thinner sample to be approved before supply , dry distemper sample to be approved before supply , chalk whiting sample to be approved before supply , paint brush 4 inch , pre fabricated double door shutter steel door of size 1100mmx1900mm made out of 2mm thick , supply of swivel bullet proof glass glass 610mm x300mmx 72 mm thick , silicone gel sealent of 01 pack of 400 gms including aplicator gun , ply wood 10 mm thick for pcc form work. , foundation bolts of 16 mm dia and 250 m long with nut bolts washer etc. , sifcon pre fabricated interlocking rcc blocks. , aggregate 20mm. , natural manufactured sand , aggregate 40mm , rapidite conforming to is 1344 2018 make acclerex cico fosroc , integrated water proofing compound. , aluminimum straight edge 50mm squre 2mm thick 1800mm long , wooden flat gurmala , water leveling pipe pvc 100 mtr , hand rivet gun machine , drill bit 6mm dia , drill bit 8mm dia , tape measuring metallic 30 m , mason trowel karchi , tasla iron 18 inch , shovel with wooden handle , axe picks with wooden handle , fawda with wooden handle , crobar 5 feet long , rammer with wooden handle of wt 5 10 kg , sieve for sieving fine and crose agg 900 x 1500mm made of angle iron frame with stand , brick hammer 1 2 kgs , cutting plier insulate 6 inch , screw driver 12 inch with insulated plastic , pipe wrench 12 inch , pipe wrench 18 inch , adjustable spanner 12 inch , hacksaw frame with 2 blade , hand gloves canvas with isi mark , aluminium sprit level 6 inch , brick line , plumbob
Tender For supply of set of under frame front part (schedule of infrastructural requirements to mdts 21261 rev-03 dated: 09.06.2020) to be mask as per drawing number mi005396 alt e for lhb type coach wit h mounting arrangement of biological tank. as per planning set list no: mp13uframebio version 3b . note: alteration of child drawing part i.e. le11451 alt. b, le11447 alt. a, le11444 alt. nil & le11446 alt. nil are applicable special condition: a. to maintain the limit of straightness and twist in front part of the under frame, inspection fixture to drawing no xj003601 alt. a is to be followed to improve the q uality of front part & under frame of lhb coaches. b. at present, as per revised drawings of under fra me head stock top flanges i.e. le11284 alt g and le11285 alt h are replaced with 4mm ferritic stainle ss steel to material grade specification no rdso spec no c-k201 x2crni12. c. the standard welding p rocedure followed in lh b coaches for welding carbon steel to stainless steel shall be applicable i.e. sp ecific electrode, post process of the weld etc. d. cbc housing inside area shall be grit/garnet blasted a nd to be painted with epoxy metalprimer of dft 60 micron and high build paint elastified with dft 14 0 micron as per spec n o mdts 094 as mentioned in drawing number: mi005396 alt e. protection proc edure: w1100100, packing instruction: s/mcfpi042 front part ver.0. [ warranty period: 84 months a fter the date of delivery ]
Tender For supply of materials/items for mgnrega works nancowry block for fy-2025-26 - rate for accssible ares (kamorta & nancowry islands), cement (o.p.c) 43-grade, crusher dust good quality, pulverised sand good quality, coarse sand good quality, boulder 40-90mm, stone aggregate 40 mm, stone aggregate 20 mm, stone aggregate 12.5/13.2mm, cement concrete hollow block 40x15x20 cms, cement concrete hollow block 40x10x20 cms, m.s flat various size, m.s angle various size, tmt steel bars various size, binding wire good quality, nailsvarious size, nut & bolt various size, j hook various size, coach screw with cap washer 2 , self type screw various sizes as per requirement, ply wood anti-termite (commercial), approved/ reputed brand. 12 mm thick, ply wood water proof & factory painted (marine), approved/ reputed brand. 19 mm thick, pre painted galvanised (ppgi) roofing sheet 9 feet, ppgi plain sheet 2 feet width, cement primer (reputed brand.) good quality, wood primer (reputed brand.) good quality, oil bound distemper (reputed brand.) good quality, synthetic enamel paint (reputed brand) good quality, painting brush (amar) various sizes, sliding bolt make classic 300x16mm, window handles (anodized) various sizes as per requirement, iron hinges various sizes as per requirement, tower bolt (anodized) various sizes as per requirement, w/c pan complete set make hindustan or any other reputed company indian type (460x440) mm, pvc pipe make hindustan 100 mm, pvc pipe 3 inch, thinner make sheenlac good quality, steel hand saw for wood good quality, saw file (triangular) 4 inch, augur 3/8 inch, wooden shuttering with propping good quality wood, g.i. wire mesh of dia. 4mm, pvc coated to achieve outer dia. not less than 5mm in required colour, shade and height. (reputed brand) mesh size 100x100mm, pre cast rcc post for fencing top width-12cm, bottom width-15cm, height-1.70m, main bars-4 nos.10mm dia, stirrups-8mm dia @100mmc/c spacing, rcc mix-1:1.5:3, pre-cast rcc hume pipe. inner dia-1.00m, length-1.00m, thickness-10cm, main bars-12mm dia, stirrups-10mm dia @100mmc/c spacing, rcc mix-1:1.5:3, pre-cast rcc hume pipe inner dia-0.50m, length-1.00m, thickness-10cm, main bars-12mm dia, stirrups-10mm dia @100mmc/c spacing, rcc mix-1:1.5:3, pre-cast rcc ring for c/o ring well inner dia-2.0m., height-30cm, thickness-8cm, vertical main bars- 8mm dia@10cm c/c spacing , and 3 nos. 8mm dia distribution bars of rcc mix-1:1.5:3, plump bob good quality, sledge hammer good quality, ball peen hammer good quality, try square good quality, trowel good quality, mixing pan good quality, pvc cowl 100mm, pvc door frame make rajshree 50x47mm wide 5mm thick, pvc door 30x50mm wide 5mm thick and 75mm wide pvc sheets for top rail, preparation & installation of citizen information board fully metallic board of (4x3) feet on 4 feet stand. black coloured board with information written in white and have to fix with concrete footing at work site, preparation & installation of citizen information board fully metallic board of (2x3) feet on 4 feet stand. black coloured board with information written in white and have to fix with concrete footing at work site, preparation & installation of citizen information board fully wooden board of (4x3) feet on 4 feet stand. black coloured board with information written in white and have to fix proper footing support., mooram good quality, epoxy paint standard, red oxide paint standard, welding charges arc welding, mixer machine (on hire) 10/7 cubic feet or 1 bag capacity, hiring of road roller8 tonne, precast rcc circular slab of 1.44 sqm,thickness-5 cm, main bars-8 mm dia, distribution bars-8mm dia @100mm c/c spacing, rcc mix-1:1.5:3, rate for inaccssible areas (katchal, teressa & chowra islands), cement (o.p.c) 43-grade, crusher dust good quality, pulverised sand good quality, coarse sand good quality, boulder 40-90mm, stone aggregate 40 mm, stone aggregate 20 mm, stone aggregate 12.5/13.2mm, cement concrete hollow b
Tender For material supply for construction of womens self-help group sanjivini building at kattemalavadi village in hunsur tq under mnrega scheme - kmvadi-bib cock 20mm nominal bore, kmvadi-fabrication charges., kmvadi-cost of 6.5mm m.s. coil, kmvadi-transportation charges of materials beyond 5 km at 10%, kmvadi-add cement sand and grit 1% on material, kmvadi-plumber, kmvadi-add, kmvadi-polyethylene pipes high density 32 mm dia external dia, kmvadi-stone aggregate single size 10 mm nominal size, kmvadi-stone aggregate single size 20 mm nominal size, kmvadi-pvc pipe of 6kg / cum,90 mm, kmvadi-cost of centering at 1% on material, kmvadi-c.i manhole cover with frame, kmvadi-table moulded bricks of class designation 50( non modular ), kmvadi-granite metal 40 mm, kmvadi-foreman grade 1, kmvadi-handling loading and unloading 3% on material, kmvadi-labour charges for lifting and placing in position and making connection at 7% on material, kmvadi-polyenthylene water storage tank of specified capacity l, kmvadi-aluminium paint, kmvadi-add brush, putty, sand paper, roller at 5% on cost of paint, kmvadi-enamel paint, kmvadi-add brush, putty, sand paper at 5% on cost of paint, kmvadi-enamel primer, kmvadi-add brush, putty, sand paper at 2% on cost of paint, kmvadi-water proofing cement paint, kmvadi-add brush, putty, glue at 5% on cost of paint, kmvadi-whitening, kmvadi-dry distemper, kmvadi-transportation loading and unloading at1% on material, kmvadi-tools and plants at2% on material, kmvadi-hom of cutting and grinding machine1, kmvadi-hom of welding and grinding machine, kmvadi-mechanic class ii/mechanic hmp grade i/eme grade, kmvadi-anticorrosive bitumastic paint, kmvadi-12x12 m.s square rod, kmvadi-20 mm x20mm vertical m.s square rod, kmvadi-50 mm dia ms hollow pipe b class 14 gauge, kmvadi-add brush at 1% on cost of paint, kmvadi-enamel metal paint, kmvadi-add hom of welding and grinding machine at 4% on material, kmvadi-welder grade i, kmvadi-ms flat, kmvadi-m.s rods, kmvadi-fabricator, kmvadi-5.50 mm thick plain glass, kmvadi-chrominum plated screws, kmvadi-cleat angles, kmvadi-alluminium handles - 15 mm, kmvadi-alluminium tower bolt - 20 cm, kmvadi-pvc beading, kmvadi-rubber beading for shutters beading, kmvadi-nylon rollers, kmvadi-powder coated 60-70 micron, kmvadi-unit cost as per the specification, kmvadi-honnewood planks for panels 20 mm thick, kmvadi-honne wood, kmvadi-hom of machinaries for planing, kmvadi-add cutting and other wastage 5%, kmvadi-mathi/nandi wood planks for panels 25 mm thick, kmvadi-painter class i, kmvadi-add wire brush, fine steel wool, putty, sand paper, at 3% on cost of paint, kmvadi-ready mix primer paint (ready mix red lead paint), kmvadi-locking arrangements at 1% on a, kmvadi-add hom of welding and grinding machine at 2% on material, kmvadi-fitter class i, kmvadi-hooks, kmvadi-ms cleats with bolts and nuts to rest on pile, kmvadi-pintels including welded pins, kmvadi-angle iron 40x40x6mm, kmvadi-gusset plates 3.15 mm thick, kmvadi-ms sheet 1 mm thick, kmvadi-broken granite metal 20 mm, kmvadi-add white cement for pointing at 2% on material, kmvadi-add handling , loading and unloading at 2% on material, kmvadi-border tiles 30 x 10 cms, kmvadi-glazed tiles 300x450, kmvadi-white cement, kmvadi-ceramic tiles of size 30 x 30 cms, kmvadi-vitrified tiles 600x600 mm, kmvadi-add providing and removing scaffolding at 3% on labour, kmvadi-add sundries charges at 2 % on material, kmvadi-add handling , loading and unloading at 1% on material, kmvadi-casurina poles 100 - 150 mm, kmvadi-brick, kmvadi-add watering charges at 1 % on labour, kmvadi-stone chistler class ii, kmvadi-mason class ii (with tools), kmvadi-mixer (concrete small used in culvert), kmvadi-boulders, kmvadi-bond stone 20 x 20 x 45 cm, kmvadi-size stone 20 x 20 x 25 cms, kmvadi-binding wire, kmvadi-tmt bars fe 500, kmvadi-add formwork at 4% out of material and labour, kmvadi-add formwork and staging at 20% for height upto 5 m, kmvadi-concrete mixer 0.4/0.
Tender For supply of ord items - white paint , sky blue paint , red paint , og paint , black paint , wood primer , red oxide paint , yellow paint , ply wood eight mm , rope synthetic
Tender For supply of required materials for construction of sanjeevini shed at saluru gp shikaripura taluk shivamogga district - rcc ring 0.90 m dia(sgp sk), rcc concrete cap 1.00 m dia(sgp sk), pvc pipes 10kgf / sqcm 90mm outer dia(sgp sk), chlorinated polyvinyl - chloride (cpvc) pipe 25 mm outer dia(sgp sk), lead or pvc connection pipe 32mm dia (for wash basin)(sgp sk), c.i. / m.s. brackets for flushing cistern(sgp sk), brass stop cock(sgp sk), cp brass waste 32 mm of standard pattern(sgp sk), cp brass chain with plug(sgp sk), copper plated brass piller tap 15mm(sgp sk), white vitreous china clay flat back wash basin size 550x400mm(sgp sk), g.i. overflow pipe 20mm dia(sgp sk), black plastic seat with lid as specified(sgp sk), white glazed/viterous china clay 10lts low lwvwl flushingcistern, with fittings and brackets and 40 mm white c.p. flush pipe(sgp sk), european type water classet of specific make(sgp sk), corbon electrodes(sgp sk), anchor bolts 750mm(sgp sk), base plate / base plate(sgp sk), gusset plates 6 mm thick(sgp sk), ms angle iron 40mm x 40mm x 6mm, 23 mtr in length at 3.5 kg per mtr(sgp sk), ms angle iron 50mm x 50mm x 6mm 33.8 mtr in length at4.5 kg per mtr (sgp sk), polyenthylene water storage tank of specified capacity l(sgp sk), enamel paint(sgp sk), plastic emulsion paint(sgp sk), border tiles 30 x 10 cms(sgp sk), glazed tiles 300x450(sgp sk), white cement(sgp sk), ceramic tiles of size 30 x 30 cms(sgp sk), sal wood (white)(sgp sk), enamel metal paint(sgp sk), ready mix primer paint (ready mix red lead paint)(sgp sk), ms flat(sgp sk), m.s rods(sgp sk), thick plain glass 5.50 mm (sgp sk), chrominum plated screws(sgp sk), cleat angles(sgp sk), alluminium handles - 15 mm(sgp sk), alluminium tower bolt - 20 cm(sgp sk), pvc edge beading(sgp sk), rubber beading for shutters beading(sgp sk), aluminium window frame section 1.20 mm thick(sgp sk), honnewood planks for panels 20 mm thick(sgp sk), honne wood(sgp sk), vitrified tiles 600x600 mm(sgp sk), solid concrete block (40x 15 x 20 cms)- 5.00 n/sqmm(sgp sk), burnt bricks class 35 (non modular)(sgp sk), jungle wood runners and planks(sgp sk), casurina poles 75 - 100 mm dia(sgp sk), casurina poles 100 - 150 mm(sgp sk), silver oak or equivalent planks 38 mm thick(sgp sk), stone at quarry(sgp sk), boulders(sgp sk), bond stone 20 x 20 x 45 cm(sgp sk), size stone 20 x 20 x 25 cms(sgp sk), binding wire(sgp sk), tmt bars fe 500(sgp sk), plasticizer / super plasticizer(sgp sk), portland cement(sgp sk), coarse sand (zone iii)(sgp sk), broken stone aggregate 12 mm to 10 mm size(sgp sk), broken stone aggregate 20 mm size(sgp sk), broken stone aggregate 40 mm size(sgp sk)