Latest metal structural Tenders | Government metal structural Tenders

Central Government/Public Sector

CTN :41507722

10 Sep, 2025 4.22 Lacs

Porbandar - Gujarat

Tender For defect rectification on various electrical and hull defects onboard icgs c-445 - h-215: 04 in nos partition to be provided in computer rack for storage of file and books. in way jobs include;-(a) relocation of television.(b) 04 nos partitions in ss rack., h-212:08 nos ladder steps in main alleyway ladder found cracked and worn out. steps to be renewed with anti-slip grips as per sample. nut bolts of steps to be renewed.qty -08 nos, material-al., h-217: 01 in no sofa for sitting arrangement in wardroom to be fabricated and fitted. job include:(i) fabrication of 01 in no sofa as per sample.(ii) fitment of sofa in position.(iii) removal and fitment of existing fitting racks.(iv) fabrication of sofa covers. (v) rearrange of dining table. sofa size- 2500 x 500 x 350 mm, l-077: base plate, rotary volume switch socket and junction box of 02 in nos main broadcast system speakers at bridge top and quarterdeck deteriorated due to weathering. mb speakers to be disconnected from junction box and fabrication of base plate, socket and junction box to be carried out, connectorisation of speakers to be done and mb system to be proved for satisfactory operation. specifications of base plate, rotary switch and junction box are as follows:- (a) base plate- 24cmx14cmx10cm, mat-ms is- 513, powder coated.(b) junction box- 9.5cmx8.5cmx6.5cm, mat- ms is-513, powder coated.(c) rotary volume switch-1 pole, 5 way, h-216: chalk test of main engine ventilation flap air tight door observed suboptimal. minor crack and pitting observed on aluminium flap and frame. defect to be rectified by renewal of ventilation flap including cutting and metal buildup of frame. chalk test to be proved. in way jobs includes removal, fitment, machining, welding of door and frame. door size-(1000 x 2000 mm). ventilation door -01 no, mat - al., h-218: aluminum rack for storage in waterjet compartment to be fabricated as per sample. material-aluminum. size- (l x b x h) (3ft x 2ft x 1ft)., h-219: storage box to be fabricated for storage of machinery spares in waterjet compartment (mat- al, qty - 01 no, size - 100 cm x 50 cm x 50 cm)., 01 in no ba controller board to be fabricated as per sample. material : wood/ sunmica.

CTN :41477863

29 Aug, 2025 NA

Gurdaspur - Punjab

Tender For supply of fabrication of drone repair shelter , bosch power tool bits 46 pcs , stanley telecommunication tool set 53 pcs , lipo charger b6 , wire 50 mtrs , techometer , xyqz training drone , dm002 training drone , wall mounting racks for spares of drones , propeller , frame , brushless motor , 895 pcs m6-m12 head nut bolt set , insulated tweezer

CTN :41235853

25 Aug, 2025 98.0 Thousand

Multi City - Telangana

Tender For corrigendum : procurement of general items required for bhupalpalli area - m.s. bolts & nuts, rivets, washers & screws, dog nails, fish plates, nuts & bolts for fish plates, belt jointing pins, cable hooks and signal hooks, belt conveyor rollers, belt sections, resin capsules, cement capsules, gi canisters , blasting gallery – spacers, radiator repairs, repairs and rewinding of motors of ac & dc, repairs / rewinding of transformers (welding / lighting/ power), gi wire, wire mesh for longwall salvage, manufacturing of supply of electrical coils for , ac motors up to 6.6 kv grade and transformer coils up to 33 kv grade, repairs of rotors for electric motor, lighting cable, steel chock manufacturing, house wiring, all types of fan repairs, shovel bucket welding, repairs of pumps, couplings manufacturing, special steel and alloy castings (tooth points, track pads, mn steel casting), manufacturing of fly ash bricks. (not to be manufactured at stores site. it shall be at their own site)., manufacturing of pump components (spares)., transformer oil filtration, reconditioning of drill bits and drill rods, vulcanizing the old trailing cables of drill machines, sdls, lhds, etc. (work should be carried out at the respective mine premises). , manufacturing of earth clams, g.i flats, g.i bolts and nuts., manufacturing of earth pit components and erection., crimping of hydraulic hoses., repairs to hydraulic pumps, motors, control valves and other related components, refurbishing of lt & ht switches with oem spares including testing., manufacturing / repairs of slip rings & d-contacts., furniture repairs i.e., cane chairs, table, almirahs, etc., repairs to wet grinders, water purifiers, and water coolers, manufacturing of coupling bolts of all sizes, fabrication of oht line components like cross arms, clamps, stay wires, cross brassings, base plates etc., manufacturing of haulage rope drum rollers., all sizes of ventilation doors.

State Government

CTN :41453269

21 Aug, 2025 6.73 Lacs

Ramagundam - Telangana

Tender For repair works on river water pump-i by dismantling, disassembling bowls, machining, metal buildup and balancing of parts; fabrication and supply of spares; reassembling bowls and refitting at godavari pump house.

Central Government And Public Sector

CTN :41403632

23 Aug, 2025 NA

Thane - Maharashtra

Tender For supply of spares for travelling water screen : : - head sprocket , tail or bottom sprocket , fabrication and supply of top section , fabrication and supply of intermediate section , fabrication and supply of boot section

Central Government/Public Sector

CTN :41300962

18 Aug, 2025 18.26 Lacs

Angul - Odisha

Tender For corrigendum : fabrication and making of a) various spares of drain out valve ,gate valve, sluice valve of both ph-i and ii filter bed.

CTN :41367001

13 Aug, 2025 NA

Kheri - Uttar Pradesh

Tender For belrayan consaltency/fabrication/ commissioning of 80 ton weigh bridge and supply of its spares

corporations/Associations/Others

CTN :41142633

21 Aug, 2025 NA

Ramanathapuram - Tamil Nadu

Tender For corrigendum : overhauling and reconditioning of spare annual rate contract valves of hp bfp# 1 and 2 and ip bfp#1, including fabrication and supply of essential spares and o rings

Central Government/Public Sector

CTN :41296434

25 Aug, 2025 NA

Delhi - Delhi

Tender For supply of set of spares of bvht system as per annexure a attached. make-oasis fabrication. [ warra nty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :41260634

20 Aug, 2025 NA

Bangalore - Karnataka

Tender For tender for supply of plumbing hardware material d d =- general spares hardware items and consumables for compressor air lines fabricaion works and boilers use teflon tape roll ptfe size half inch , teflon tape roll ptfe 3 by 4 inch , hose clamp ss 3 by 8 inch , hose clamp ss half inch , hose clamp ss 3 by 4 inch , brass ball valve bsp thread heavy duty size 1 by 4 inch , brass ball valve bsp thread heavy duty size half inch , brass ball valve bsp thread heavy duty size 3 by 4 inch , brass ball valve bsp thread heavy duty size 1 inch , gi fittings with isi standard union gi bsp thread size half inch , union gi bsp thread size 3 by 4 inch , union gi bsp thread size 1 inch , union gi bsp thread size 2 inch , hexoganal nipple gi bsp thread size half inch , hexoganal nipple gi bsp thread size 3 by 4 inch , nipple gi bsp thread size 1 inch , nipple gi bsp thread size 2 inch , collar gi bsp thread size half inch , collar gi bsp thread size 3 by 4 inch , collar gi bsp thread size 2 inch , collar gi bsp thread size 1 inch , elbow gi bsp thread size 3 by 4 inch , elbow gi bsp thread size 2 inch , tee gi bsp thread size 3 by 4 inch , reducer tee gi bsp thread size 3 by 4 inch x half inch , reducer collar gi bsp thread size 3 by 4 inch x half inch , reducer nipple gi bsp thread size 3 by 4 inch x half inch , 4 way tee gi bsp thread size 3 by 4 inch , gi pipe c class size 1 inch standard length of 6 mtrs each , brass hose nipple size half inch bsp thread for 1 by 4 inch hose , general items for fabrication of metals as per standard en 12413 sl no 32 to sl no 34 cut off wheel size 14 inch , cut off wheel size 4 inch , grinding wheel size 4 inch , hss hacksaw blade size 12 inch x half inch x 18 by 24by 32 tpi , ss welding rod size dia 3 15mm grade is 10631 1983 appx 2 kg box or packet , metalic gasket sheet thickness 3 mm , ss flange centre hole dia half inch , ss flange centre hole dia 3 by 4 inch , brass foot valve threaded type size 1 and half inch , brass foot valve thread type 2 inch size , hose clamp ss 1 and half inch , cotton thread ball 3 ply , pipe nipple gi bsp thread length 3 inch size half inch as per is standard , pipe nipple gi bsp thread length 6 inch size half inch as per is standard , pipe nipple gi bsp thread length 3 inch size 3 by 4 inch as per is standard , gi pipe c inch class size 3 by 4 inch standard length of 6 mtrs as per is standard , gi pipe c inch class size half inch standard length of 6 mtrs , arc welding rust proof seamless insulated and high strength copper cable size 70sq mm , general items and consumables for fabrication and maintenance works cutting torch with nozzle with is 7653 standard 1975 , oxygen regulator dura series , acetylene regulator dura series , hose for oxy-acetylene gas cutting set red colour for acetylene as per is447 1988 size id 08 mm x od14mm , hose for gas cutting set blue colour for oxygen as per is 447 1988 size id 08mm x od 14mm , non metallic gasket thickness 3mm , reducer elbow gi bsp thread size 3 by 4 inch x half inch , elbow gi bsp thread size half inch as per is standard , 3 by 4 inch c class ms pipe standard lenght of 6 mtrs , 1 inch c class ms pipe standard length of 6 mtrs , 2 inch c class ms pipe standard length of 6 mtrs , nylon braided hose size 3 by 8 inch working pressure 6 to 8 bar , nylon braided hosemsize half inch working pressure 6 to 8 bar , m s welding electrode size dia 3 point 2 or 3 point 15 0f length 350mm grade e6013 and is 814 2004 apprx 2 kg packet x 6 nos 1 box

Metal Structural Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government And Public Sector

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector